Radio Frequency Detection,

Spectrum Analysis, and Direction

Finding Equipment
Market Survey Report
April 2019

Approved for Public Release SAVER-T-MSR-19

The Radio Frequency Detection, Spectrum Analysis, and Direction Finding Market Survey Report is funded
under Interagency Agreement No. HSHQPM 15 X 00134 from the U.S. Department of Homeland Security,
Science and Technology Directorate.
The views and opinions of authors expressed herein do not necessarily reflect those of the U.S. government.
Reference herein to any specific commercial products, processes, or services by trade name, trademark,
manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or
favoring by the U.S. government.
The information and statements contained herein shall not be used for the purposes of advertising, nor to
imply the endorsement or recommendation of the U.S. government.
With respect to documentation contained herein, neither the U.S. government nor any of its employees make
any warranty, express or implied, including but not limited to the warranties of merchantability and fitness for
a particular purpose. Further, neither the U.S. government nor any of its employees assume any legal liability
or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or
process disclosed; nor do they represent that its use would not infringe privately owned rights.
The cover photo and images included herein were provided by the National Urban Security Technology
Laboratory, unless otherwise noted.

Approved for Public Release ii

FOREWORD
The U.S. Department of Homeland Security (DHS) established the System Assessment and Validation
for Emergency Responders (SAVER) Program to assist emergency responders making procurement
decisions. The National Urban Security Technology Laboratory (NUSTL) located within the DHS
Science and Technology Directorate (S&T) manages the SAVER Program, conducts objective
assessments and validations on commercially available equipment and systems, and develops
knowledge products that provide relevant equipment information to the emergency responder
community. The SAVER Program mission includes:

• Conducting impartial, practitioner relevant, operationally oriented assessments and validations of

emergency response equipment.

• Providing information, in the form of knowledge products, that enables decision makers and
responders to better select, procure, use, and maintain emergency response equipment.
SAVER Program knowledge products provide information on equipment that falls under the
categories listed in the DHS Authorized Equipment List (AEL), focusing primarily on two main
questions for the responder community: “What equipment is available?” and “How does it perform?”
These knowledge products are shared nationally with the responder community, providing a life-and
cost-saving asset to DHS, as well as to federal, state, and local responders.
NUSTL is responsible for all SAVER activities, including selecting and prioritizing program topics,
developing SAVER knowledge products, coordinating with other organizations, and ensuring flexibility
and responsiveness to first responder requirements.
NUSTL provides expertise and analysis on a wide range of key subject areas, including chemical,
biological, radiological, nuclear, and explosive weapons detection; emergency response and
recovery; and related equipment, instrumentation, and technologies. NUSTL developed this report to
provide emergency responders with information obtained from an operationally oriented assessment
of radio frequency (RF) detection, spectrum analysis, and direction finding equipment, which fall
under AEL reference numbers 06CP-07-RFSA, titled RF Detection and Spectrum Analysis Equipment,
and 06CP-07-RFDF, titled RF Direction Finding Equipment.
For more information on NUSTL’s SAVER Program or to view additional reports on RF detection,
spectrum analysis, and direction finding equipment, visit the DHS S&T SAVER home page at
www.dhs.gov/science-and-technology/saver.

Approved for Public Release iii

POINT OF CONTACT
National Urban Security Technology Laboratory (NUSTL)
U.S. Department of Homeland Security
Science and Technology Directorate
201 Varick Street
New York, NY 10014

E-mail: [email protected]
Website: www.dhs.gov/science-and-technology/saver

Author:
Hasan Shahid, SAVER Program

Approved for Public Release iv

EXECUTIVE SUMMARY
In recent years, radio frequency (RF) jammers have become increasingly more accessible to the
public. While most RF jamming is benign and simply intended to provide extra privacy, first responder
operations have also been specifically targeted by jamming and interference attacks. RF detection,
spectrum analysis, and direction finding equipment can be used to detect, identify, and locate RF
interference sources that may be disrupting first responder communications systems.
Many RF technologies are available for operational field usage, as opposed to laboratory usage. This
allows for quick deployment, letting responders locate and mitigate radio interference. Some of
these products can be installed as a permanent fixed sensor or can be portable and deployed
temporarily as a fixed sensor. Other products are handheld and mobile, allowing responders to
thoroughly search an area, which may be affected by RF interference.
Some of these products have features such as built-in map and spectrum plot displays to provide
data visualization or internal storage drives that allow data to be recorded for future analysis. These
technologies can detect RF interference sources at frequencies as low as 9 kHz and as high as
18 GHz.
The purpose of this market survey report is to provide emergency responders with information on RF
detection, spectrum analysis, and direction finding equipment that are commercially available in
order to guide purchasing and acquisition decision-making.
In June 2018, NUSTL through its System Assessment and Validation for Emergency Responders
(SAVER) Program, conducted a market survey of RF detection, spectrum analysis, and direction
finding equipment. The survey produced 14 products ranging in price from $15,000 to $270,000.
The results of the market survey are highlighted in this report. Performance of these products has
not been independently verified by NUSTL.
Emergency response agencies that consider purchasing RF detection, spectrum analysis, and
direction finding equipment should carefully research the overall capabilities and limitations and
technical specifications of each system in relation to their agency’s operational needs.

Approved for Public Release v

TABLE OF CONTENTS
1.0 Introduction ............................................................................................................................................ 8
2.0 RF Detection, Spectrum Analysis, and Direction Finding Equipment Overview ................................ 8
2.1 Current Technologies ........................................................................................................................ 9
2.2 Applications........................................................................................................................................ 9
3.0 Product Information............................................................................................................................... 9
3.1 Alion Versatile RF Automated Monitoring System ......................................................................... 12
3.2 Applied Signals Intelligence ASI 2020 DF Fixed Site .................................................................... 12
3.3 Applied Signals Intelligence ASI 2020DF Backpack ..................................................................... 13
3.4 Chemring Technology Solutions Resolve 3 HF/VHF/UHF Direction Finding System .................. 13
3.5 CRFS RF Eye Node 20-6, 50-8, 100-8, 100-18 ............................................................................. 14
3.6 CRFS RF Eye Guard ......................................................................................................................... 15
3.7 CRFS RF Eye Array 50, 100, 125, 150, 300 ................................................................................. 15
3.8 DGS SigBASE 6000 ......................................................................................................................... 17
3.9 DGS SigBASE 4000 ......................................................................................................................... 17
3.10 LS Telcom LS Observer ................................................................................................................. 17
3.11 PCTEL SeeWave Interference Locating System .......................................................................... 19
3.12 Rohde and Schwarz PR100 Portable Receiver ........................................................................... 20
3.13 Rohde and Schwarz DDF007 Portable Direction Finder ............................................................ 20
3.14 Rohde and Schwarz NESTOR Mobile Network Survey Software and RF Scanner .................... 20
4.0 Vendor Contact Information ................................................................................................................ 21
5.0 Conclusions .......................................................................................................................................... 22

Approved for Public Release vi

LIST OF FIGURES
Figure 3-1 Alion V-RAMS ............................................................................................................................ 12
Figure 3-2 ASI 2020 DF Fixed Site ............................................................................................................ 12
Figure 3-3 ASI 2020 DF Backpack ............................................................................................................ 13
Figure 3-4 CRFS RF Eye 100-18 Node...................................................................................................... 14
Figure 3-5 CRFS RF Eye Guard .................................................................................................................. 15
Figure 3-6 CRFS RF Eye Array .................................................................................................................... 15
Figure 3-7 LS Observer FMU ...................................................................................................................... 18
Figure 3-8 LS Observer PMU ..................................................................................................................... 18
Figure 3-9 LS Observer PPU ...................................................................................................................... 18
Figure 3-10 SeeWave Interference Locating System .............................................................................. 19
Figure 3-11 PR100 Portable Receiver ...................................................................................................... 20
Figure 3-12 DDF007 Portable Direction Finder ....................................................................................... 20
Figure 3-13 NESTOR Mobile Network Survey Software and RF Scanner ............................................... 20

LIST OF TABLES
Table 3-1 Product Comparison Matrix ...................................................................................................... 10
Table 3-2 Comparison of RF Eye Node Models ........................................................................................ 14
Table 3-3 Comparison of RF Eye Array Models ........................................................................................ 16
Table 3-4 LS Observer Receiver Sensitivity .............................................................................................. 19
Table 4-1 Vendor Contact Information ..................................................................................................... 21

Approved for Public Release vii

1.0 INTRODUCTION
Radio frequency (RF) detection and spectrum analysis equipment includes devices that can detect,
identify, and analyze RF signals transmitted by various sources. RF direction finding equipment
includes devices that measure and triangulate the direction from which an RF signal was
transmitted. These devices can be used to identify and locate transmissions from suspicious or
threatening sources, including RF interference that may be blocking first responder communications
or damaging electronic devices. NUSTL, through its System Assessment and Validation for
Emergency Responders (SAVER) Program, conducted a market survey to provide emergency
responders with information on RF detection, spectrum analysis, and direction finding equipment.
This market survey report is based on information gathered during June 2018 from vendor websites,
internet research, industry publications and a government-issued Request for Information (RFI) that
was posted on the Federal Business Opportunities website. For inclusion in this report, products had
to meet the following criteria:

• Product must be commercially available

• Product must be designed for usage in the field rather than in a laboratory environment

• Product must be designed to detect RF signals intended to interfere with first responder
communications systems.
Due diligence was performed to develop a report that is representative of products in the
marketplace.

2.0 RF DETECTION, SPECTRUM ANALYSIS, AND DIRECTION FINDING

EQUIPMENT OVERVIEW
In recent years RF jammers have become increasingly more accessible to the public. While most RF
jamming is simply intended to provide extra privacy, first responder operations have also been
specifically targeted by jamming and interference attacks.
Radio interference works by targeting receivers. An RF jammer will transmit a signal on the same
frequency as the desired signal. The jamming signal may be received at the same power level or a
greater power level, thus preventing receivers from being able to distinguish the desired signal from
the jamming signal.
While radio communications may be the most obvious target of RF jammers, these interference
sources can also disrupt the operation of other devices that communicate wirelessly. An example of
this is the usage of a Global Positioning System (GPS) jammer by a truck driver to avoid paying
highway tolls and avoid being tracked by his or her employer. Alternatively, an example of an RF
jammer specifically targeting first responder operations is an interference source preventing a
control center from receiving video uploaded by traffic cameras.

Approved for Public Release 8

 2.1 CURRENT TECHNOLOGIES
The technologies listed in this report range from fixed site sensors with omnidirectional antennas
for spectrum monitoring to mobile handheld sensors with directional antennas for direction
finding. Most of the products in this report can operate as a standalone sensor. However, some
products, especially fixed site sensors, can be networked for greater monitoring coverage. While
some of the technologies include a built-in display, many use an external laptop or tablet, which
provides a spectrum analyzer or a map display locating any detected RF jamming and interference
sources.
2.2 APPLICATIONS
As mentioned above, RF jamming and interference can disrupt first responder communications
during emergency response operations. RF detection devices can be used to identify any RF
interference that might impact communications. Spectrum analysis devices can be used to
determine the frequency and received strength of RF interference. Spectrum analysis devices can
also be used to identify frequencies that are free of interference should a responder use channel
switching as a RF jamming mitigation tactic. RF direction finders can assist in locating RF jamming
devices. If the interference source is located, responders can apply direct mitigation tactics to
overcome the impacts of RF jamming.

3.0 PRODUCT INFORMATION

This section provides information on 14 RF detection, spectrum analysis, and direction finding
devices that range in price from $15,000 to $270,000. Table 3-1 provides general product
characteristics and/or specifications. Product information presented in this section was obtained
directly from manufacturers, vendors, and their websites. The information has not been
independently verified by the SAVER Program.
Product information in Table 3-1 includes price and product features such as:
Manufacturer: The company that develops the product.
Product: The name of the product.
Price: The cost of the base configuration of the product. This cost does not include maintenance,
training, custom configurations, or upgrades,
Basic Capabilities and Features: RF detection, spectrum analysis, and direction finding capabilities,
and the presence of a built-in display. A checkmark indicates that the base configurations of the
product has the capability or feature.
Detection Bandwidth: The frequencies that the base configuration of the product is capable of
operating, not including extensions.
Scanning Bandwidth: The instantaneous bandwidth, not including extensions, of the receiver
included in the base configuration of the product.
Receiver Sensitivity: The minimum signal-to-noise ratio that the base configuration of the product is
able to detect.

Approved for Public Release 9

 Table 3-1 Product Comparison Matrix

Spectrum
Detection

Direction
Analysis

Finding

Built-In
Display
Detection Scanning
Manufacturer Product Price Receiver Sensitivity

RF
Bandwidth* Bandwidth*

Versatile RF
Automated blank 20 MHz to 6 GHz 22 dB,
Alion $76,270.53 10 Hz to 650 kHz
Monitoring centered at 2 GHz
System
Applied Signals ASI 2020DF
$125,000 blank 2 MHz to 600 MHz 1 MHz -134 dB to -123 dB
Intelligence Fixed Site
Applied Signals ASI 2020DF
Intelligence Backpack
$100,000 blank 2 MHz to 600 MHz 1 MHz -134 dB to -123 dB

Resolve 3 1 MHz to 3 GHz

Chemring <20 dB to <6 dB,
HF/VHF/UHF (detection);
Technology $150,000 blank 40 MHz dependent on
Direction 2 MHz to 3 GHz
Solutions frequency
Finding System (direction finding)

CRFS RF Eye Node See Table 3-2 blank blank See Table 3-2 See Table 3-2 See Table 3-2

Dependent on RF Eye Dependent on RF Eye Dependent on RF Eye

CRFS RF Eye Guard $130,000 blank blank Node integrated into Node integrated into Node integrated into
the system the system the system

CRFS RF Eye Array See Table 3-3 blank See Table 3-3 See Table 3-3 See Table 3-3

Dependent on
transmission
DGS SigBASE 6000 $50,629 blank 50 MHz to 6 GHz 20 MHz to 80 MHz
frequencies and
antenna configuration
$15,999; -114 dBm with 1 kHz
DGS SigBASE 4000 $7,999 for blank 70 MHz to 6 GHz 20 to 40 MHz bandwidth, centered at
software 2.4 GHz

Approved for Public Release 10

 Spectrum
Detection

Direction
Analysis

Finding

Built-In
Display
Detection Scanning
Manufacturer Product Price Receiver Sensitivity

RF
Bandwidth* Bandwidth*

9 kHz to 6 GHz
9 kHz to 18 GHz (FMU (WB1 scanning mode);
$27,600 (FMU); Dependent on
and PPU); 100 kHz to 18 GHz
LS Telcom LS Observer $34,500 (PPU); blank frequency;
9 kHz to 12.4 GHz (WB2 scanning mode);
$33,400 (PMU) see Table 3-4
(PMU) 100 kHz to 12.4 GHz
(NB scanning mode)
SeeWave
-120 dBm to -30 dBm,
PCTEL Interference $25,445 690 MHz to 6 GHz 5 kHz to 20 MHz
centered at 30 kHz
Locating System
Contact Rohde and Contact Rohde and
Rohde and PR100 Portable
$24,000 9 kHz to 7.5 GHz Schwarz for Schwarz for
Schwarz Receiver
specifications** specifications**
9 kHz to 7.5 GHz
DDF007
Rohde and (detection);
Portable $150,000 Contact sales rep Contact sales rep
Schwarz 20 MHz-6 GHz
Direction Finder
(direction finding)
NESTOR Mobile
Contact Rohde -126 dBm with a 22.46
Rohde and Network Survey
and Schwarz for blank blank blank 350 MHz to 4.4 GHz 140 Hz to 1.438 MHz kHz bandwidth,
Schwarz Software and RF
pricing* centered at 900 MHz
Scanner**
*This information was not given because it is considered proprietary or competition specific by the vendor.
**Specifications given for the R&S NESTOR reflect the typical configuration with the R&S TSMA Scanner.
Acronyms: Units:
FMU: Fixed Monitoring Unit Hz: Hertz
PPU: Protected Portable Unit kHz: Kilohertz
PMU: Portable Monitoring Unit MHz: Megahertz
WB1: Wideband 1 GHz: Gigahertz
WB2: Wideband 2 dB: Decibel
NB: Narrowband dBm: Decibel relative to 1 milliwatt

Approved for Public Release 11

 3.1 ALION VERSATILE RF AUTOMATED MONITORING SYSTEM
The Alion Versatile RF Monitoring System (V-RAMS) is capable of RF
detection, spectrum analysis, and direction finding. Key spectrum
analysis features of the V-RAMS include stored trace, parametric and
in-phase and quadrature (I/Q) data; terrain mapping of potential
interference sources; editable spectrum masks; and a licensed
database of emitters for identification of detected signals.
The V-RAMS can function in spectrum survey mode, manual or semi-
automated mode, or real-time interference forensics and enforcement
mode. The V-RAMS is a portable deployable system that operates as a
fixed sensor system. The product can act as a standalone sensor or be
networked with other V-RAMS units. The fixed yet portable setup
enables real-time electromagnetic emissions monitoring, allowing users
to track spectrum usage, recognize anomalous signals, and identify Figure 3-1 Alion V-RAMS
potential interference sources. V-RAMS alerts users to threshold
Courtesy of Alion Science
violations as they occur, through audio, visual, or e-mail alerts. Signal
V-RAMS also incorporates a graphical user interface (GUI) software that can be run on Windows
operating systems. The GUI can play back spectrum files and display parametric data of detected
signals with a terrain map showing nearby transmitters. Azimuth charts can also be displayed if a
directional antenna system is used.
The V-RAMS is capable of detecting RF signals within the bandwidth of 20 MHz to 6 GHz. An
optional range extension to 75 GHz is also available. The scanning bandwidth of the V-RAMS
ranges from 10 Hz to 650 kHz. The noise floor of the V-RAMS is 22 dB at 2 GHz. An external low
noise amplifier (LNA) can increase the sensitivity of the receiver. The vendor specifies the entire
system weighs less than 30 pounds. The price of the V-RAMS, as quoted by Alion, is $76,270.53.
3.2 APPLIED SIGNALS INTELLIGENCE ASI 2020 DF FIXED SITE
The Applied Signals Intelligence ASI 2020DF Fixed Site is capable of RF
detection, spectrum analysis, and direction finding. The technology is a fixed
site sensor that can intercept and locate analog and digital RF emitters in
the high frequency (HF), very high frequency (VHF), and ultra-high frequency
(UHF) frequency bands. The product can act as a standalone sensor or be
networked for interoperability and data sharing with multiple systems.
The ASI 2020DF Fixed Site includes a user-interface software application
that can be used with Windows-based operating systems. The interface
provides spectrum plots and map displays as well as receiver control, search
and scan, record, and other basic receiver functions. The software
application can record audio files, geolocation data, and digital mobile radio
metadata, which can be stored on internal or external hard drives.
Figure 3-2 ASI 2020
The ASI 2020DF has a detection bandwidth of 2 MHz to 600 MHz. The DF Fixed Site
scanning bandwidth of the product is 1 MHz with an available extension up Courtesy of Applied Signals
to 50 MHz for permanent fixed site installations. Intelligence

Approved for Public Release 12

 The receiver sensitivity, while dependent on frequency, ranges from -134 dB to -123 dB. The
maximum detection range, as given by the vendor, is 10 to 15 miles; however, this is dependent
on factors including the transmission frequency and power of the RF interference source and
attenuation due to environmental conditions. Software-defined radio hardware used with the
system is 12 x 5 x 2.75 inches and weighs 4.75 pounds. The antenna is 45 x 8.5 x 8.5 inches and
weighs 12 pounds. The ASI 2020DF Fixed Site costs approximately $125,000.
3.3 APPLIED SIGNALS INTELLIGENCE ASI 2020DF
BACKPACK
The Applied Signals Intelligence ASI 2020DF Backpack
is a mobile version of the fixed site sensor. The ASI
2020DF Backpack is designed for on-the-move
operation and can be concealed for covert operations.
The backpack version of the product also includes a
ruggedized tablet on which the user interface software
application is loaded.
The ASI 2020DF Backpack has a detection bandwidth
of 2 MHz to 600 MHz. The scanning bandwidth of the Figure 3-3 ASI 2020 DF Backpack
product is 1 MHz. The receiver sensitivity, while
Courtesy of Applied Signals Intelligence
dependent on frequency, ranges from -134 dB to -123
dB. The maximum detection range is 10 to 15 miles;
however, this is dependent on factors including the transmission frequency and power and
environmental conditions. Software-defined radio hardware used with the system is 12 x 5 x 2.75
inches and weighs 4.75 pounds. The antenna is 16.2 x 9.1 x 4.3 inches and weighs 2.4 pounds.
The ASI 2020 DF Backpack costs approximately $100,000.
3.4 CHEMRING TECHNOLOGY SOLUTIONS RESOLVE 3 HF/VHF/UHF DIRECTION FINDING SYSTEM
The Resolve 3 Direction Finding System was developed by Chemring Technology Solutions and is
distributed in North America by Rapid Response Defense Systems. The system is designed as a
man-portable direction finding system. The Resolve 3 provides operators wideband direction
finding capabilities and real time position fixing in the HF, VHF, and UHF bands.
The Resolve 3 is modular and scalable, which enables mission specific tasking. System
configurations allow for operation in a static position, on the march (on foot), and on the move
(vehicle). While designed as a mobile solution, the Resolve 3 can also be used as a fixed site
sensor. The product can be deployed as a standalone device and can be networked with other
sensors through a wide variety of communications networks.
The Resolve 3 can be operated with either the TacFix software loaded onto a tablet running an
Android operating system or the PreFix software loaded onto a laptop running a Windows
operating system. The TacFix software allows for easy spectral surveying and monitoring and
provides Esri maps for plotting direction-finding results. The TacFix also provides an audio alert
when a potential RF interference source is detected. The PreFix software provides spectral
displays, spectrograms, and Esri mapping. Any data accessed on the PreFix software can be saved
to the laptop’s internal hard drive for future analysis.

Approved for Public Release 13

 The Resolve 3 has a detection bandwidth of 1 MHz to 3 GHz for intercepting and receiving signals
and 2 MHz to 3 GHz for direction finding with a scanning bandwidth of 40 MHz and a scan rate of
1.5 GHz/sec. The receiver sensitivity of the system is less than 20 dB from 1 MHz to 30 MHz, less
than 20 dB from 30 MHz to 1690 MHz, and less than 6 dB at 1690 MHz, increasing linearly to
less than 16 dB at 3000 MHz. The system weight, as given by the vendor, depends on the
configuration, ranging from less than 18 pounds for a man portable system to a maximum of
60 pounds for a fully configured fixed system. The Resolve 3 costs $150,000 per unit and is
subject to additional costs for accessories and training.
3.5 CRFS RF EYE NODE 20-6, 50-8, 100-8, 100-18
The CRFS RF Eye Node is an intelligent wideband receiver capable
of RF detection and spectrum analysis. The receiver can be
deployed as a fixed sensor or a mobile sensor. It can also be
integrated into the RF Eye Guard system. Multiple models of the
RF Eye Node are available with total bandwidths up to 18 GHz and
instantaneous bandwidths up to 100 MHz. Specifications of each
model are listed in Table 3-2. The RF Eye Node is equipped with an
internal solid state drive (SSD) to save data for future analysis.
Various outdoor kits are available for the RF Eye Node. The RF Eye
Node can be integrated into the RF Eye Guard and the RF Eye Figure 3-4 CRFS RF Eye
Array, both of which are described below. The size of the RF Eye 100-18 Node
Node 20-6 is 6.7 x 2.4 x 4.9 inches with a weight of 3.1 pounds. Courtesy of CRFS
The size of the 50-8, 100-8 and 100-18 models are all 7.9 x 2.0 x
7.6 inches with a weight of 5.3 pounds.

Table 3-2 Comparison of RF Eye Node Models

RF Eye Node Model 20-6 50-8 100-8 100-18

Detection Bandwidth 10 MHZ to 6000 MHz 0.009 MHz to 8000 MHz 0.009 MHz to 8000 MHz 0.009 MHz to 18000 MHz
Instantaneous
20 MHz 50 MHz 100 MHz 100 MHz
Bandwidth
Minimum Frequency
18 Hz 1 Hz 1 Hz 1 Hz
Resolution
Noise Floor* 8 dB to 11 dB 6 dB to 10 dB 6 dB to 10 dB 8.5 dB to 13 dB

Receiver Sensitivity -126 dBm -128 dBm -128 dBm -125 dBm

Base Cost $21,000 $26,500 $36,500 $60,000

System Cost** $96,000 $147,000 $177,000 $247,500

*Noise floor specifications in this table represent a 10 kHz bandwidth centered at 1 GHz.
**System cost includes 3 RF Eye Nodes and accompanying software.

Approved for Public Release 14

 3.6 CRFS RF EYE GUARD
The CRFS RF Eye Guard continuous TSCM (Technical Surveillance Countermeasures) monitoring
system is used for detection and spectrum analysis of RF listening devices (or bugs). The RF Eye
Guard is designed for use in buildings and is typically installed in ceiling tiles.

Figure 3-5 CRFS RF Eye Guard

Courtesy of CRFS
The system is integrated with the RF Eye Node and can be a permanent security fixture or a
temporary installation. A software based user interface displays spectrum plots and detailed floor
plans locating any detected transmitters. The RF Eye Guard can locate interference sources within
buildings by using time delay of arrival (TDOA) or Power on Arrival techniques. An internal SyncLinc
timing system allows all nodes in a building to synchronize time within 10 to 20 nanoseconds
without the need for GPS or other timing sources. The system is capable of generating permanent
records of RF emission detections and be configured to generate alarms and notification in case
an RF interference source is detected. Technical specifications including detection bandwidth,
instantaneous bandwidth, minimum frequency resolution, noise floor, and receiver sensitivity are
all dependent on the RF Eye Node model used with the system. The cost of the RF Eye Guard, as
quoted by the vendor, is $130,000. This cost includes three RF Eye Nodes and accompanying
software.
3.7 CRFS RF EYE ARRAY 50, 100, 125, 150, 300
The CRFS RF Eye Array is an integrated RF detection, spectrum
monitoring, and direction finding system designed for vehicle
mounted, transportable, or ground-fixed installations. The RF Eye
Array can serve as a standalone sensor or be integrated with
other RF Eye Arrays or RF Eye Nodes. A software based user
interface provides spectrum plot and map displays. Like the RF
Eye Node, multiple models of the RF Eye Array are available with
different maximum bandwidths and instantaneous bandwidths.
Detection bandwidth, instantaneous bandwidth, minimum Figure 3-6 CRFS RF Eye Array
frequency resolution, noise floor, and receiver sensitivity are all Courtesy of CRFS
dependent on the RF Eye Node model used with the system.

Approved for Public Release 15

 Specifications for each model are listed in Table 3-3. The size of the RF Eye Array 50 is 17.9 x 7.9
inches with a weight of 11 pounds. The 100, 125, and 150 models are all 25.6 x 16.5 inches with
a weight of 61.7 pounds. The RF Eye Array 300 is 43 x 31 inches with a weight of 176 pounds.
Table 3-3 Comparison of RF Eye Array Models

RF Eye Array
50 100 125 150 300
Model

Integrated RF Two 100-8 or

One 20-6 One 50-8 One 100-8 One 100-18
Eye Node Model two 100-18

0.009 MHz to 8000

0.009 MHZ
Detection 10 MHz to 0.009 MHz to 0.009 MHz to MHz (100-8 config.);
to
Bandwidth 6000 MHz 8000 MHz 8000 MHz 0.009 MHz to 8000
18000 MHz
MHz (100-18 config.)

20 MHz to 8000 MHz

Direction Finding 500 MHz to 500 MHz to 500 MHz to 500 MHz to (100-8 config.);
Bandwidth 6000 MHz 8000 MHz 8000 MHz 18000 MHz 20 MHZ to 18000 MHz
(100-18 config.)

Instantaneous
20 MHz 50 MHz 100 MHz 100 MHz 100 MHz
Bandwidth

Minimum
Frequency 18 Hz 1 Hz 1 Hz 1 Hz 1 Hz
Resolution

8.5 dB to 13 6 dB to 8.5 dB or
Noise Floor* 8 dB to 11 dB 7 dB to 12 dB 7 dB to 12 dB
dB 10 dB to 13 dB

Receiver
-126 dBm -127 dBm -127 dBm -125 dBm -125 dBm
Sensitivity

Base Cost $62,000 $79,000 $89,000 $124,000 $232,000

System Cost** $103,000 $120,000 $130,000 $165,000 $263,500

*Noise floor specifications in this table represent a 10 kHz bandwidth centered at 1 GHz.
**System cost includes RF Eye Array, mounting accessories and accompanying software. The RF Eye Array 300 system cost does not
include mounting accessories.

Approved for Public Release 16

 3.8 DGS SIGBASE 6000
The DGS SigBASE series can automate the capturing, classifying, direction finding, and alerting of
anomalous RF signals including jammers, unmanned aerial vehicles (UAVs) and unauthorized land
mobile radio (LMR) devices. The SigBASE is a fixed sensor that can operate as a standalone
sensor or a node in a multi-unit network. A single SigBASE 6000 can support multiple mission-
specific antenna configurations and up to four software defined radios.
The SigBASE uses machine learning to compare environmental RF data against a baseline of
learned and/or programmed data (such as channel masks or whitelisted radios) at the point of
intercept, without requiring backhaul of I/Q data for post processing. This capability provides
quicker access to knowledge and real-time RF situational awareness. The “trigger manager”
feature allows users to set triggers and alerts for specific signals of interest. The product can also
be operated in “stealth mode” without requiring network backhaul. Raw I/Q data and fast Fourier
transform (FFT) data can be recorded for future analysis. Data is typically stored on an internal
SSD or can be saved to centralized storage devices.
The detection bandwidth of the SigBASE 6000 ranges from 50 MHz to 6 GHz. The scanning
bandwidth of the receiver ranges from 20 MHz to 80 MHz. Detection range and receiver sensitivity
is dependent on the transmission frequency and antenna configuration of the receiver. Ranges of
up to 50 kilometers are claimed by the vendor. The size of the product, as given by the vendor, is
17 x 15 x 6.85 inches with a weight of 19.4 pounds. The SigBASE costs approximately $51,000
with annual maintenance fees of $6,300.
3.9 DGS SIGBASE 4000
The DGS SigBASE is a mobile version of the SigBASE series. The system is comprised of a
ruggedized laptop that provides wideband RF detection and spectrum analysis from 70 MHz to
6 GHz, primarily for the purposes of interference hunting. Because of its form factor and single
radio, it does not provide direction finding. Like its fixed counterpart, the SigBASE 4000 offers the
same machine learning feature for identification of interference sources, and is also capable of
recording data for future analysis. Unlike the SigBASE 6000, the mobile version includes a built-in
display.
The detection bandwidth of the SigBASE 4000 ranges from 70 MHz to 6 GHz. The scanning
bandwidth ranges from 20 MHz to 40 MHz. The receiver sensitivity is -114 dB with a 1 kHz
bandwidth and a 2.4 GHz center frequency. The size of the product, as given by the vendor is 13.7
x 8.78 x 1.34 inches with a weight of 6.61 pounds. The SigBASE 4000 hardware costs
approximately $16,000. The accompanying software costs approximately $8,000. Annual
maintenance fees for the SigBASE 4000 are $1,600.
3.10 LS TELCOM LS OBSERVER
The LS Observer is a fully integrated spectrum monitoring system capable of RF detection,
spectrum analysis, and direction finding. The system can be used for applications such as radio
surveillance of critical infrastructures, network coverage measurements, and identification and
location of illegal RF interference sources.

Approved for Public Release 17

 The system consists of various remote monitoring units (RMUs), a central
control unit, and software for detailed measurement data analysis. Depending
on the configuration of the system, deployment of the LS Observer can range
from a handheld unit to a fixed unit to airborne deployments. All configurations
are capable of acting as a standalone product yet can also network with other
sensors.
The fixed monitoring unit (FMU) is relatively small and allows for “single pole”
mounting. The FMU is designed for hard weather conditions. The portable
monitoring unit (PMU) is a small lightweight option that is equipped with a
touchscreen tablet for control and measurement displays. The protected
portable unit (PPU) is designed for outdoor operations under extreme weather
conditions.
A software application allows users to access spectrum analysis displays and
map displays while operating the device. The software application can be Figure 3-7 LS
loaded onto a separate laptop for fixed units or onto a table for portable units. Observer FMU
Raw spectrum data can be recorded and stored in local storage devices in the Courtesy of LS Telcom
monitoring units. Data is stored for 30 days when uncompressed and two
years when compressed.
The FMU and PPU have a
detection bandwidth of 9 kHz
to 18 GHz. The PMU has a
detection bandwidth of 9 kHz
to 12.4 GHz. Three scanning
modes are available for the LS
Observer: two wideband
modes (WB1 and WB2) and a
narrowband mode (NB). The
scanning bandwidth for WB1
mode is 9 kHz to 6 GHz with a
scan rate of 24GHz/second Figure 3-9 LS Observer PMU Figure 3-8 LS Observer PPU
(s). The scanning bandwidth Courtesy of LS Telcom Courtesy of LS Telcom
for WB2 mode is 100 kHz to
18 GHz with a scan rate of 24 GHz/s. The scanning bandwidth for NB mode is 100 kHz to 12.4
GHz with a scan rate of 240 kHz/s. Receiver sensitivity is dependent on frequency. Table 3-4 lists
the receiver sensitivity for various bandwidths. The size of the FMU, as given by the vendor, is 370
x 522 x 210 millimeters with a weight of 24.5 kilograms. The PPU is 560 x 420 x 250 millimeters
and weighs 15 kilograms. The PMU is 350 x 250 x 60 millimeters and weighs 5.3 kilograms. The
LS Observer FMU is priced at $27,600, the PPU at $34,500, and the PMU at $33,400.

Approved for Public Release 18

 Table 3-4 LS Observer Receiver Sensitivity

WB1 Scanning Mode WB2 Scanning Mode NB Scanning Mode

(9 khZ to 6 GHz) (100 kHz to 18 GHz) (100 kHz to 12.4 GHz)
Bandwidth Sensitivity Bandwidth Sensitivity Bandwidth Sensitivity
0.009 MHz to 0.1 MHz to 0.1 MHz to
-140 dBm/Hz -156 dBm/Hz -147 dBm/Hz
0.5 MHz 700 MHz 10 MHz
0.5 MHz to 700 MHz to 10 MHz to
-154 dBm/Hz -161 dBm/Hz -151 dBm/Hz
10 MHz 2700 MHz 100 MHz
10 MHz to -158 dBm/Hz + 2700 MHz to 100 MHz to
-158 dBm/Hz -152 dBm/Hz
6000 MHz 1.1 dB/GHz 4500 MHz 3000 MHz
4500 MHz to 3000 MHz to
-155 dBm/Hz -145 dBm/Hz
8200 MHz 5500 MHz
8200 MHz to 5500 MHz to
-156 dBm/Hz -149 dBm/Hz
15200 MHz 7000 MHz
15200 MHz to 7000 MHz to
-149 dBm/Hz -147 dBm/Hz
20000 MHz 8000 MHz
8000 MHz to
-134 dBm/Hz
11000 MHz
11000 MHz to
-129 dBm/Hz
12400 MHz

3.11 PCTEL SEEWAVE INTERFERENCE LOCATING SYSTEM

The PCTEL SeeWave system is a tool for a single user designed
for detecting and locating RF interference sources. The SeeWave
system incorporates the PCTEL SeeGull scanning receiver. A host
platform links the scanner to both a direction-finding antenna and
a touchscreen tablet. The platform can be held in one hand while
the user operates SeeWave's software application. The SeeWave
system uses advanced spectrum analysis and proprietary
algorithms to identify harmful interference and locate its source.
The SeeWave software application loaded onto the tablet includes
Figure 3-10 SeeWave Interference
a digital compass and can display spectrum charts, waterfall
Locating System
spectrograms, and various map displays. Data can be recorded to
an SD card from either the SeeGull receiver or the software Courtesy of PCTEL
application.
The SeeWave system has a detection bandwidth of 690 MHz to 6 GHz with an optional extension
to 10 MHz to 6 GHz. The scanning bandwidth of the system ranges from 5 kHz to 20 MHz and can
be adjusted in increments of 2.5 kHz. The receiver sensitivity is -120 to -30 dBm at 30 kHz. The
size of the system, as given by the vendor, is 7.3 x 8.5 x 10.5 inches with an 8-inch mounted
tablet. The system has a weight of 1.2 pounds. The system costs $25,445 and the detection
bandwidth extension costs $4,095.

Approved for Public Release 19

 3.12 ROHDE AND SCHWARZ PR100 PORTABLE RECEIVER
The Rohde and Schwarz PR100 Portable Receiver is designed for
spectrum monitoring in the field. The receiver is deployed as a standalone
product in a protective case such as a Pelican case and is powered by
either an external source or internal batteries. A built-in 6.5-inch screen
displays spectrum plots and waterfall spectrograms. These displays, along
with measurements and audio data, can be saved to an SD card for future
analysis. The PR100 can also be controlled remotely and configured with
an external trigger to record measurements. The PR100 Portable Receiver Figure 3-11 PR100
has a detection bandwidth of 9 kHz to 7.5 GHz with an optional extension Portable Receiver
up to 18 GHz. The dimensions of the product are 7.56 x 12.60 x 2.44 Courtesy of Rohde and
inches with a weight of 7.72 pounds. The base cost of the unit it $24,000. Schwarz
Units with custom configurations are $39,000.
3.13 ROHDE AND SCHWARZ DDF007 PORTABLE DIRECTION FINDER
The Rohde and Schwarz DDF007 Portable Direction Finder is capable of
high-precision RF direction finding and high-speed spectrum scans. The
product is deployed as a standalone device and can be mounted on a tripod
or a vehicle. A built-in 6.5-inch screen provides a map display to help locate
potential RF interference sources. The DDF007 can also save
measurements to an SD card, be controlled remotely, and be configured
with an external trigger to record measurements. The DDF007 Portable
Direction Finder has a detection bandwidth of 20 MHz to 6 GHz for direction
finding and 9 kHz to 7.5 GHz for detection. The dimensions of the base unit
are 7.56 x 12.60 x 2.44 inches. The base unit and the battery together Figure 3-12 DDF007
weigh 7.75 pounds. The unit costs approximately $150,000. Portable Direction
Finder
3.14 ROHDE AND SCHWARZ NESTOR MOBILE NETWORK SURVEY Courtesy of Rohde and
SOFTWARE AND RF SCANNER Schwarz

The Rohde and Schwarz NESTOR software package is

designed for use with Rohde and Schwarz TSMx RF
Scanner products to analyze mobile networks.
Applications for the software include cellular base
station coverage mapping, position estimation, and
forensic analysis.
The typical configuration of the system uses the Rohde
and Schwarz TSMA Scanner. This configuration has a Figure 3-13 NESTOR Mobile Network Survey
detection bandwidth of 350 MHz to 4.4 GHz. The Software and RF Scanner
scanning bandwidth is adjustable from 140 Hz to 1.438
Courtesy of Rohde and Schwarz
MHz. The system has a receiver sensitivity of -126 dBm
at 900 MHz with a frequency resolution of 22.46 kHz.

Approved for Public Release 20

4.0 VENDOR CONTACT INFORMATION
Additional information on the insert product/technology included in this market survey report can be obtained from the vendors listed in
Table 4-1.
Table 4-1 Vendor Contact Information
Phone
Vendor Address E-mail Website
Number
8193 Dorsey Run Road
Alion N/A [email protected] https://alionscience.com
Annapolis Junction, MD 20701
45954 Center Oak Plaza
240-463-
Applied Signals Intelligence Suite 100 [email protected] https://www.asigint.com/
3306
Sterling, VA 20166
4230-D Lafayette Center Drive 571-321-
CRFS Inc. [email protected] www.crfs.com
Chantilly, VA 20151 5470
10000 Virginia Manor Road
847-910-
Digital Global System Inc. Suite 340 [email protected] www.digitalglobalsystems.com
2775
Beltsville, MD 20705
5021 Howerton Way
201-377-
LS Telcom Inc. Suite E [email protected] www.lstelcom.us
6966
Bowie, MD 20715
20410 Observation Drive
703-589-
PCTEL Inc. Suite 200 [email protected] www.pctel.com
8818
Germantown, MD 20876
12 Goodyear
949-482-
Rapid Response Defense Systems Inc.* Suite 100 [email protected] www.rrds.com
1632
Irvine, CA 92618
6821 Benjamin Franklin Drive 888-837-
Rohde and Schwarz USA Inc. [email protected] www.Rohde-schwarz.com
Columbia, MD 21046 8772

*Rapid Response Defense Systems is the North American distributor of the Chemring DF System

Approved for Public Release 21

5.0 CONCLUSIONS
With the accessibility of RF jammers increasing, first responder operations are becoming more
vulnerable to this threat. RF interference sources may disrupt radio communications and the
operation of sensors and other types of equipment that transmit data wirelessly.
RF detection, spectrum analysis, and direction finding equipment allows responders to detect,
identify, and locate RF jamming and interference sources. Once interference sources are located,
responders can mitigate the threat.
This market survey report provides information on 14 RF detection, spectrum analysis, and direction
finding systems, which can detect signals on frequencies as low as 9 kHz and as high as 18 GHz. The
products described in the market survey report include fixed site sensors, which can be networked
for spectrum monitoring, and mobile handheld sensors with directional antennas for direction
finding. Many of the systems include a display that provides spectrum analysis and location
visualizations. In addition to the configuration of the products, the technologies also differ in price,
detection bandwidth, scanning bandwidth and frequency resolution, detection range, and receiver
sensitivity. The products in this market survey report range in price from $15,000 to $270,000.
Emergency responder agencies that consider purchasing RF detection, spectrum analysis, and
direction finding systems should carefully research each product’s overall capabilities and limitations
in relation to their agency’s operational needs.

Approved for Public Release 22