0% found this document useful (0 votes)
47 views1 page

Load 011.20.0644.131.5112N

The document is a load diagram drawing showing three curves representing the moment and axial load capacities of a bolted connection. Curve 1.1 represents the static capacity with a safety factor of 1.0. Curve 3 is the bolt capacity curve based on VDI-Guideline 2230, with M12 bolts, 36 bolts, an alpha value of 1.6, and a minimum clamping length and preload of 60mm and 70% respectively. The bearing was confirmed by CRB Antriebstechnik as suitable for the actual loads.

Uploaded by

Yong Khar Hoh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
47 views1 page

Load 011.20.0644.131.5112N

The document is a load diagram drawing showing three curves representing the moment and axial load capacities of a bolted connection. Curve 1.1 represents the static capacity with a safety factor of 1.0. Curve 3 is the bolt capacity curve based on VDI-Guideline 2230, with M12 bolts, 36 bolts, an alpha value of 1.6, and a minimum clamping length and preload of 60mm and 70% respectively. The bearing was confirmed by CRB Antriebstechnik as suitable for the actual loads.

Uploaded by

Yong Khar Hoh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LOAD DIAGRAM

D R A W I N G NO.: 011.20.0644.131.5112N

250
Curve 3
225
MOMENT ( kNm )

200

175

150
Curve1,1
125

100

75

50

25

0
0 250 500 750 1000 1250 1500 1750

AXIAL LOAD ( kN )

CURVE 1.1: STATIC CAPACITY WITH SAFETY 1,0

CURVE 3: BOLTS BOLT QUALITY: 10,9 BOLT DIA: M 12


NUMBER OF BOLTS: 36 ALPHA A: 1,6
MIN. CLAMPING LENGTH: 60 PRELOAD:% 70

BOLT CAPACITY CURVE ON THE BASIS OF VDI-GUIDELINE 2230

LOADS IN COMPRESSION
THE BEARING MUST BE CONFIRMED BY US DATE NAME
AS BEING SUITABLE FOR THE ACTUAL LOADS calculated 04.04.2016
appr.

CRB Antriebstechnik

You might also like