SPECIFICATION FOR APPROVAL

Customer.
Description. DC FAN

Part No.

Delta Model No. EFB0512VHBBBN 04

Sample Issue No.

Sample Issue Date. FEB.14 2017

PLEASE SEND ONE COPY OF THIS SPECIFICATION BACK

AFTER YOU SIGNED APPROVAL FOR PRODUCTION PRE-
ARRANGMENT.
APPROVED BY:

DATE :

DELTA ELECTRONICS, INC.

TAOYUAN PLANT
252, SHANG YING ROAD, KUEI SAN INDUSTRIAL ZONE TAOYUAN
SHIEN, TAIWAN, R.O.C.
TEL:886-(0)3-3591968
FAX:886-(0)3-3591991
 *** SAMPLE HISTORY***

CUSTOMER:
CUSTOMER P/N:
DELTA MODEL: EFB0512VHBBBN

CHECKED ISSUE
REV. DESCRIPTION DRAWN APPROVED
DATE
ME EE CE
11/03'15
00 ISSUE SPEC 11/03'15
11/03'15 11/03'15 -- 11/09'15
11/03'15
11/20'15
01 REVISE THE PERFORMANCE 11/20'15
11/20'15 11/20'15 -- 11/23'15
11/20'15
01/05'16
02 ADD THE F00 01/05'16
01/05'16 01/05'16 -- 01/05'16
01/05'16

REVISE THE LABEL AND THE 02/06'17

03 DIMENSION OF CABLE
02/06'17
02/06'17 02/06'17 -- 02/06'17
02/06'17
02/14'17
04 REVISE THE BARCODE OF LABEL 02/14'17
02/14'17 02/14'17 -- 02/14'17
02/14'17
DELTA ELECTRONICS, INC.
252, SHANG YING ROAD, KUEI SAN TEL : 886-(0)3-3591968
TAOYUAN HSIEN 333, TAIWAN, R. O. C. FAX : 886-(0)3-3591991

SPECIFICATION FOR APPROVAL

Customer:
Description: DC FAN
Customer P/N: REV:
Delta Model NO.: EFB0512VHBBBN Delta safety model NO.: N/A
Sample Rev: 04 Issue NO:
Sample Issue Date: FEB.14 2017 Quantity:

1. SCOPE:
THIS SPECIFICATION DEFINES THE ELECTRICAL AND MECHANICAL
CHARACTERISTICS OF THE DC BRUSHLESS AXIAL FLOW FAN.

2. CHARACTERS:

ITEM DESCRIPTION

RATED VOLTAGE 13.5 VDC

OPERATION VOLTAGE 9.0 - 16.0 VDC

INPUT CURRENT (AVG) 0.13 (MAX. 0.16 ) A

INPUT POWER (AVG) 1.76 (MAX. 2.16) W

SPEED

MAX. AIR FLOW 0.369 (MIN. 0.325) M3/MIN.

(AT ZERO STATIC PRESSURE) 13.03 (MIN. 11.47) CFM
MAX.AIR PRESSURE 5.65 (MIN. 4.35) mmH2O
(AT ZERO AIRFLOW) 0.222 (MIN. 0.171) inchH2O
ACOUSTICAL NOISE (AVG.) 35.0 (MAX. 39.0) dB-A

(continued)

A00
page: 1
PART NO:

DELTA MODEL: EFB0512VHBBBN

LIFE EXPECTANCE(L10) 8000 HOURS, THE TEMPERATURE

(AT LABEL VOLTAGE) PROFILE AS TABLE 1

ROTATION CLOCKWISE VIEW

FROM NAME PLATE SIDE

PROTECTION FAN LOCKED, OVERVOLTAGE AND

REVERSE POLARITY PROTECTION

NOTES: 1. ALL READINGS ARE MEASURED AFTER STABLY WARMING UP

THROUGH 10 MINUTES.

3. THE VALUES WRITTEN IN PARENS , ( ), ARE LIMITED SPEC.

4. ACOUSTICAL NOISE MEASURING CONDITION:

DC FAN
MICROPHONE

AIR FLOW

1m

NOISE IS MEASURED AT RATED VOLTAGE IN FREE AIR IN ANECHOIC

CHAMBER WITH B & K SOUND LEVEL METER WITH MICROPHONE AT
A DISTANCE OF 1M FROM THE FAN INTAKE.

page: 2 A00
PART NO:

DELTA MODEL: EFB0512VHBBBN

3. MECHANICAL:
3-1. DIMENSIONS SEE DIMENSIONS DRAWING
3-2. FRAME PLASTIC UL: 94V-0
3-3. IMPELLER PLASTIC UL: 94V-0
3-4. BEARING SYSTEM TWO BALL BEARINGS
3-5. WEIGHT 35 GRAMS (REF)

4. ENVIRONMENTAL:
4-1. OPERATING TEMPERATURE -40 TO +105 DEGREE C
4-2. STORAGE TEMPERATURE -40 TO +105 DEGREE C
4-3. OPERATING HUMIDITY
4-4. STORAGE HUMIDITY

5. PROTECTION:

5-1. LOCKED ROTOR PROTECTION

IMPEDANCE OF MOTOR WINDING PROTECTS MOTOR FROM FIRE IN 96
HOURS OF LOCKED ROTOR CONDITION AT THE RATED VOLTAGE.

5-2. POLARITY PROTECTION

BE CAPABLE OF WITHSTANDING IF REVERSE CONNECTION FOR POSITIVE
AND NEGATIVE LEADS.

6. RE OZONE DEPLETING SUBSTANCES:

6-1. NO CONTAINING PBBs, PBBOs, CFCs, PBBEs, PBDPEs AND HCFCs.

7. PRODUCTION LOCATION
7-1. PRODUCTS WILL BE PRODUCED IN THAILAND.

page: 3 A00
 PART NO:

DELTA MODEL: EFB0512VHBBBN

8. P & Q CURVE:

13.5V
AIR PRESSURE

AIR FLOW

* TEST CONDITION: INPUT VOLTAGE OPERATION VOLTAGE

TEMPERATURE ROOM TEMPERATURE
HUMIDITY

page: 4 A00
PART NO:

DELTA MODEL: EFB0512VHBBBN

9. DIMENSION DRAWING:
LABEL:

ROTATION DIRECTION

AIR DIRECTION

NOTE:
1. LEAD WIRE: FLR2X-A--0.35
RED WIRE : Positive (+)
BLACK WIRE : Negative (-)
BLUE WIRE : F00
2. THIS PRODUCT IS RoHS COMPLAINCE

A00
Page: 5
PART NO:

DELTA MODEL: EFB0512VHBBBN

10. FAN INTERFACE:

10-1. FAN BLOCK DIAGRAM

NOTE: THE EXTERNAL PULL UP RESISTANCE (Rpull-up)SHALL NOT EXCEED 3.6K OHM.

10-2. TACHO SIGNAL WAVEFORM:

FAN RUNNING FOR 4 POLES

TS = T1 + T2 + T3 + T4
SPEED = 60 / TS(RPM )

10-3. TACHO SIGNAL OUTPUT RANGE AND OUTPUT LOGIC LEVEL

A00
Page: 6
 EMC
V pull-up VIN(RED) Protection
IC Circuit FAN
R pull-up Control
Unit
TACHO(BLUE)
VFG
Buffer

GND(BLACK)

FAN I/O INTERFACE

Fan Interface Fan Block Diagram

 Application Notice
1. Delta will not guarantee the performance of the products if the application condition
falls outside the parameters set forth in the specification.
2. A written request should be submitted to Delta prior to approval if deviation from
this specification is required.
3. Please exercise caution when handling fans. Damage may be caused when pressure is
applied to the impeller, if the fans are handled by the lead wires, or if the fan was
hard-dropped to the production floor.
4. Except as pertains to some special designs, there is no guarantee that the products will
be free from any such safety problems or failures as caused by the introduction of
powder, droplets of water or encroachment of insect into the hub.
5. The above-mentioned conditions are representative of some unique examples and viewed
as the first point of reference prior to all other information.
6. It is very important to establish the correct polarity before connecting the fan to the
power source. Positive (+) and Negative (-). Damage may be caused to the fans if
connection is with reverse polarity, if there is no foolproof method to protect against
such error specifically mentioned in this spec.
7. Delta fans without special protection are not suitable where any corrosive fluids are
introduced to their environment.
8. Please ensure all fans are stored according to the storage temperature limits specified.
Do not store fans in a high humidity environment. We highly recommend performance
testing is conducted before shipping, if the fans have been stored over 6 months.
9. Not all fans are provided with the Lock Rotor Protection feature. If you impair the
rotation of the impeller for the fans that do not have this function, the performance
of those fans will lead to failure.
10. Please be cautious when mounting the fan. Incorrect mounting of fans may cause
excess resonance, vibration and subsequent noise.
11. It is important to consider safety when testing the fans. A suitable fan guard should be
fitted to the fan to guard against any potential for personal injury.
12. Except where specifically stated, all tests are carried out at room (ambient) temperature
and relative humidity conditions of 25oC, 65% RH. The test value is only for fan
performance itself.
13. Be certain to connect an “ 4.7µF or greater” capacitor to the fan externally when
the application calls for using multiple fans in parallel, to avoid any unstable power.

Doc. No: FMBG-ES Form 001 Rev. 0001 Date: June 24, 2009
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Delta Electronics:
EFB0512VHBBBN