®

®
SPLIT-LID TABLE TOP
TWO SIDED
TOASTER
MODEL
GR14SPTK-UK, GR14SPTK-CE
GR14SPTKG-CE, GR14SPTKG240
GR14SPTK-TAI
®

Installation and
Operation
Instructions
2M-Z9194 Rev. C 11/23/2010
®

GR14SPTK-UK


 SAFETY SYMBOL

These symbols are intended to alert the user to the presence of

important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE
Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.
Star reserves the right to change specifications and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifications contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifications. By using the information provided, the user assumes all risks in
connection with such use.

MAINTENANCE AND REPAIRS

Contact your local dealer for service or required maintenance. Please record the model number, serial

2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

number, voltage and purchase date in the area below and have it ready when you call to ensure a faster
service.
Model No.
FOR SERVICE CONTACT:
Servequip
Serial No. Telephone: 011-44-208686-8855

Voltage Taiwan
Middleby Taiwan Corporation
Purchase Date Telephone: 011-91-98-1044-0174

2

 GENERAL INSTALLATION DATA
This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
CAUTION general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made
with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.

INSTALLATION
1. Plug the unit into a dedicated 230 VAC line with United Kingdom BS 1363A receptacle.
2. DO NOT plug into a 120V line. Doing so will damage the unit and void the warranty.
3. Each machine has been properly wired and inspected at the factory for operation on the voltage
and type of current specified on the nameplate.

DO NOT CONNECT TO ANY TYPE OF CURRENT OTHER THAN 230 VAC OR THE
MACHINE WILL BE SERIOUSLY DAMAGED.
WARNING
INITIAL START UP
2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).
Before using the unit for the first time, wipe down the exterior and toasting area with a damp cloth.
Take to a well ventilated area and heat for approximately 30 minutes. The grill may emit a small
amount of smoke as the cooking surfaces reaches 232°C. Do not be alarmed, as the smoke is
caused by oils associated with the manufacturing process and will stop when the burn off is complete.
Brush off any debris from the toasting surface.

SEASONING THE COOKING SURFACES

FIRST TIME SEASONING
Follow your company/corporate guidelines for seasoning cooking surfaces. or
1. Bring the grill to 148°C and leave it on while doing the next three steps.
2. Brush the cooking surfaces with a release agent. If using an aerosol agent,
first apply into a cup and then brush onto cooking surface.
3. Let sit for 20 minutes, and then wipe clean using a warm damp cloth.
DAILY SEASONING
The grill should not require much seasoning while in use. In most cases, brush a light coating of the
baking release agent in the morning and occasionally throughout the day will be enough to prevent any
sticking. It is not necessary to spray before grilling each item.

PRESET TIMES AND TEMPERATURES

If adjustments are required, please refer to the time or temperature programming section in this
manual.
°F/°C CONVERSION
To change the temperature display from °F to °C or from °C to °F, hold the TEMP button while the unit is
turned off. While holding the TEMP button, turn the unit on. The display will be the changed temperature
mode. To change back, repeat the procedure.


OPERATING INSTRUCTIONS
1. Turn the unit on by placing the switch in the ON position. The HEAT ON indicator, program number
and display will flash indicating the unit is heating. When the preset temperature is reached, the
heating light, display and program light indicator will stop flashing followed by 3 beeps. (Initial startup
heating time is approximately 30 minutes).
2. Place product on the bottom cooking surface of the unit and close the lids.
3. Press the PROGRAM button and let the displayed time count down to "0" at which time the unit will
beep. To turn off the beeper, press the PROGRAM button again.
4. Raise the lid until it engages into the first detent and remove food. Using a spatula, scrape residue
into the grease catcher tray.
NOTE: Metal utensils may be used, however, using nonmetal utensils will prolong the life of the
cooking surface.
5. Turn the unit off when it is not in use.

TEMPERATURE/TIMER CONTROLLER OPERATION SPECIFICATIONS

Startup:
1. The preset time will flash until the preset temperature is reached.
2. When the control reaches the preset temperature, time display, the HEAT ON indicator and program
indicator will stop flashing and the alarm will beep three times.
Temperature:
1. To view the actual temperature, press and hold the TEMP button. The display will read "Lo" if the
temperature is below 135°C (273°F) and "Hi" if the temperature is above 300°C (573°F).
To Program Time and Temperature:
1. Press and hold TEMP (actual temperature displays).
2. While holding TEMP, press and hold any program button on the left for one second. The LED above
the program number will light and the display will read "_ _ _ _." Enter the four-digit security code

2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

sequence: 4, 3, 2, 1. The security code will not show on the display. Once the correct sequence has
been entered, the preset time will be displayed and the LED for that program will begin to flash.
3. Set the time with the "+ or -" buttons.
4. Press the TEMP button to save the time.
5. The preset temperature will now be displayed.
6. Set the desired temperature for this program using the "+ or -" buttons.
7. Press the TEMP button to save the temperature and to exit the programming mode for this
program. The LED will stop flashing but will remain lit.
8. Press any other program button within 15 seconds to continue programming without
re-entering the security code.
9. While programming a program (LED is flashing), if no input is received for 15 seconds the unit will
revert to normal operation and the security code must be re-entered.

NOTE: Temperature settings are done with the Left side buttons only. The time settings
programmed on the left buttons will also be programmed onto the Right side. See the next
section to make time changes to the Right side only. Each programming change must be
saved by pressing the TEMP button!

Right Side (Timer only):

1. To change the time on right, press and hold the TEMP button, then press and hold any program
button on the right for one second. The LED above the program button will light and the right
display will read "_ _ _ _." Enter the four-digit security code sequence: 4, 3, 2, 1. The security
code will not show on display. Once the correct sequence has been entered, the preset time will
be displayed and the LED for that program will begin to flash.
2. Set the time with the "+ or -" buttons.
3. Press the TEMP button to save the time.
4. The LED will stop flashing but will remain lit.


 5. Press any other program button within 15 seconds to continue programming without re-
entering the security code.
6. While programming a program (LED is flashing), if no input is received for 15 seconds the
unit will revert to normal operation and the security code must be re-entered.

Operation:
1. Pressing any program button (1-4) will start the timer countdown and display the remaining preset
time. The LED for the appropriate program will be lit during the countdown and will remain lit until
another program is selected.
2. When the display reaches "00:00", the buzzer will sound and the digits will flash.
3. Press the program button to silence the buzzer and return the readout to programmed time.
4. The right and left sides will operate independently of each other. Both timers can be in operation
at the same time. The "00:00" display will show which side is timed out.

MONTHLY INSPECTION
Check all bolts/screws and tighten if necessary.

CLEANING
Begin cleaning procedure by using the operating procedures within your organization, or follow the
steps below:
1. If particles adhere to the cooking surface during the day, scrape them off with a spatula.
NOTE: It is best not to let food cook onto the grill, as food build-up on the grill will increase sticking and
smoking. In addition, carbon may build up on the grill surface and reduce the cooking efficiency.
CARBON BUILDUP: A black matter that forms on or near the cooking surface. Generally this is a
combination of: releasing agents, oils, food particles etc. that has cooked itself to the surface. After
a period of time without cleaning, this will reduce performance and material may start flaking off.
When that happens, follow the "Carbon Cleaning" procedures.
2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

2. At the end of the day, wipe down all surfaces with a warm, damp cloth and mild detergent, then
dry.
Empty and clean the grease catcher tray as required using detergent and water (after removing the tray
from the unit).

CARBON CLEANING
When carbon build up occurs, use a carbon removal agent (safe for aluminum) according to the instructions
provided with the cleaner. When this process is complete, you must re-season the grill according to
your company/corporate guidelines, or the seasoning instructions in this manual.

DO NOT IMMERSE OR LET THE UNIT STAND IN WATER. DO NOT HOSE DOWN
THE UNIT. KEEP THE UNIT AWAY FROM RUNNING WATER.
CAUTION
DO NOT SPLASH THE CONTROL HOUSING! DO NOT SPLASH THE CONDUIT
CONNECTING THE TOP AND BOTTOM OF THE TOASTER!

BEFORE CLEANING, MAKE SURE POWER IS TURNED OFF AND THE UNIT IS
UNPLUGGED.
CAUTION


 INTERNATIONAL ONE (1) YEAR EQUIPMENT WARRANTY
All workmanship and materials in “STAR” products are warranted for a period of one year from the date shipped from the factory or
one year from the date shown on the proof of purchase of the end-user when purchased through an authorized “STAR” dealer/dis-
tributor in a commercial foodservice location.
“STAR’s” obligation under this warranty is limited to the replacement of the defective part(s) only without charge. This warranty is
void if damage occurs from improper installation, misuse or abuse, disassembly or tampering of unit for any purpose other than repair
by a qualified service agent, wrong voltage, incorrect or fluctuating voltage conditions, wrong gas, improper gas or gas conditions,
operated contrary to the installation and operating instructions, operated in an application for which the unit is not suited, or if the unit
is not maintained and/or cleaned in a suitable manner.
Any expense in connection with installation, or any cost of making adjustments on a unit to conform to electric or gas service at the
point of installation, are not covered by this warranty.
* The warranty period for the JetStar series six (6) ounce popcorn machines is two (2) years.
* The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit.
* The warranty period for Teflon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not
apply if damage occurs to Teflon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive
cleaners. This warranty does not apply to the “non-stick” properties of such materials.
* This warranty is not valid on Conveyor Ovens unless a “start-up/check-out has been performed by a Factory Authorized Technician.
In order to make a claim under this warranty; a warranty report must be filed with Star Manufacturing International Inc. in St. Louis,
Missouri, U.S.A. by the dealer/distibutor through which product was purchased. All details, including serial number and model num-
ber of the defective unit, must be included. Failure to file a claim within a 120 Day time period may result in the claim being refused.
“STAR” may forego the necessity of returning the part for inspection dependent upon the expense involved. However, “STAR”
requires defective parts to be held in the claimant’s possession for a period of ninety (90) days for possible inspection by a “STAR”
representative or designated inspector .

2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

The foregoing warranty is lieu of any and all other warranties, expressed or implied, and constitutes the entire warranty.

PARTS WARRANTY
Parts that are sold for out-of-warranty repair are warranted for a period of ninety days. The part only is warranted; no labor.

SERVICES NOT COVERED BY WARRANTY

1. Labor
2. Mileage and/or travel time
3. Installation and/or adjustment of equipment
4. Operation contrary to the installation and operating instructions
5. Cleaning of equipment
6. Seasoning of griddle plates
7. Voltage conversions/adjustments
8. Gas conversions
9. Pilot light conversion/adjustments
10. Thermostat calibration/adjustments
11. Resetting of circuit breakers or safety controls
12. Replacement of bulbs/lamps
13. Replacement of fuses
14. Damages due to improper installation
15. Damages from abuse or misuse
16. Damage created by acts of God, Acts of War, or Civil Disturbance

08-05 rms


 UNITS WITH IEC CONNECTOR:
POWER INLET CONNECTOR:
IEC 320 C-20 POWER INLET, ON ALL 208 - 240V UNITS.
FOR USE WITH DETACHABLE CORDSETS SUPPLIED
WITH A STRAIGHT, FEMALE, IEC 60320 C-19 CONNECTOR.

18

19

L N
E
TOP ELEMENT TOP ELEMENT
RIGHT LEFT G
(ELEMENT MAS ALTO) (ELEMENT MAS ALTO)
20
SENSOR - RIGHT
(SENSORIO)
REAR OF CONNECTOR SHOWN.
SENSOR - LEFT
(SENSORIO)

TRANSFORMER TERMINAL BLOCK

(TRANSFORMADOR) (BLOQUE TERMINAL)

RELAY
(RELE)
8 12
7 7 11
12
8 11
1

1 0
6 2

6 2
8 4

8 4

4
4
0

6
D C
B A

13 14 9
2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

16 15
2 10
5 1 10 3

BOTTOM ELEMENT
(ELEMENTO MAS BAJO)

SWITCH
(INTERRUPTOR)

5
13
6
14 3
15
1
16 2
E3 E4 E1
E11
E12 E2

E7 E6 E5

REAR OF CONTROLLER

FOR REFERENCE
WIRING DIAGRAM IS SHOWN AS UNIT IS ASSEMBLED
WITH THE BOTTOM PLATE REMOVED. THE TOP
DESCRIPTIONS ARE THEIR POSITIONS WHEN UPRIGHT.

WIRE DIAGRAM, 230V, 2300 WATT

(2J-Z6323 CONTROLLER ONLY)

SOME ITEMS ARE INCLUDED FOR

ILLUSTRATIVE PURPOSES ONLY AND IN
CERTAIN INSTANCES MAY NOT BE AVAILABLE STAR MANUFACTURING INTERNATIONAL, INC.
SK2153 REV. - 11/9/2005
MODEL: SEE ABOVE

 55
54
53

12
30

13
48
44
36
4

57
9 38

8
5
51
40
22
46
50 37 10 52
56
34
35
20
33 14
49
52 28 3 19

2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

41 47 32 23
24 1

15
TEM
P HEA TIME
T / TEM

25
P
ON ON

OFF 1 TIME
/ TEM
2 P
FLAT
BREA 3
D
QUES
4

CLEA 1
N
2
FLAT
BREA 3
D
QUES
4

43 6

16 18
39 27 21
45
51
7
42 45
11
Nameplate 26

2 17

SOME ITEMS ARE INCLUDED FOR

ILLUSTRATIVE PURPOSES ONLY AND IN
CERTAIN INSTANCES MAY NOT BE AVAILABLE

STAR MANUFACTURING INTERNATIONAL, INC.

MODEL - GR14SPT
SK1750 REV. F 4/15/10


 PARTS LIST August 13, 2010, Rev C

Model: GR14SPTK-CE, GR14SPTK-UK, GR14SPTKG240, GR14SPTKG-CE, GR14SPTK-TAI
Fig Part No Qty Description Application
1 2A-Z6484 2 PLATE (COUNTER BALANCE MOUNT)
2 NLA
D9-GR0152 BODY ASSEMBLY
3 1
D9-Z10083 BODY-14” GR14SPTKG
4 D9-GR0177 1 BURN GUARD ASSEMBLY - LEFT
5 D9-GR0176 1 BURN GUARD ASSEMBLY - RIGHT
6 D9-GR0156 1 REAR PLATE ASSEMBLY
D9-GR0517 GREASE DRAWER ASSEMBLY GR14SPTKG
7 1
D9-GR0518 GREASE DRAWER ASSEMBLY
8 D9-GR0182 2 TOP RETAINING PLATE ASSEMBLY
9 PART OF ITEM #34
10 2A-Y6142 4 SLEEVE HANDLE
11 2A-Z11501 4 FOOT 1” SOLID RUBBER
2B-Z10355 ARM,CG/GR14SPT W/45 FRONT GR14SPTKG
12 4
2B-Z3336 14” GR14SPT ARM
13 2C-Z3200 4 PIN - TOP HOUSING
14 2C-Z3350 2 HALF CLAMP - .188 DIAMETER
15 2E-Z3808 1 SWITCH TOGGLE
16 2E-05-07-0350 1 TRANSFORMER 230V/10V 6VA
2E-Y9251 CORD SET CONT EUR 16AMP GR14SPTK-CE
2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

2E-Z4119 POWER CORD, 12/3, 5-20P GR14SPTKG-CE

2E-Z9192 CORD POWER GR14SPTK-UK, GR14SPTK-SEA
17 1
2E-Z13795 CRDSET/15A, 125V,5-15,C-19 GR14SPTK-SEA
2E-Z2905 CORD SJTO 12/3 NEMA 6-20P GR14SPTK-TAI
D9-GR0194 POWER CORD, 12/3 6-15P GR14SPTKG240, GR14SPTK-240
18 2E-Z2894 1 TERMINAL BLOCK (304)
19 D9-Z3903 2 BRACKET, PROBE MOUNT
20 2E-Z3278 2 RTD PROBE - 48” LONG WIRE
2
21 2E-Z3335 RELAY DOUBLE POLE - SINGLE THREAD
3 GR14SPTKG240
D9-Z13206 PLATE, BOTTOM GR14SPTKG
22 1
PS-GR0361 KIT, 2F-Z1945 CASTING - SMOOTH BOTTOM, ALUMINUM
2F-Z5615 CASTING-TOP-GROOVED GR14SPTKG
23 2
PS-GR0356 KIT, 2F-Z3237 CASTING - TOP
24 2I-05-07-0013 1 BOOT SWITCH
D9-GR0325
25 D9-GR0380 1 CONTROL PROGRAMMING GR14SPTK-240, GR14SPTG240
D9-GR0529 GR14SPTK-TAI
2E-Y9253 INLET IEC 320 16AMP
26 2K-Y6764 1 BUSHING - STRAIN RELIEF GR14SPTKG240
2K-Y8688 BUSHING, 90°
12 GR14SPTKG240
27 2K-Z1971 SPACER .257X.75X.25 NYLON
14
28 2M-12-07-0038 1 LABEL ON & OFF

Star Manufacturing International, Inc.


PARTS LIST August 13, 2010, Rev C

Model: GR14SPTK-CE, GR14SPTK-UK, GR14SPTKG240, GR14SPTKG-CE, GR14SPTK-TAI

30 2M-Z2620 2 LABEL CAUTION, BI-LINGUAL

2M-Z10087 GR14SPTKG
32 2M-Z9191 1 OVERLAY GR14SPTK-CE, GR14SPTK-UK
2M-Z3337 GR14SPTK-TAI
33 2N-Z9327 1 ELEMENT, HEATING, 1300 W
34 2N-Z9326 2 ELEMENT, HEATING, TOP 500W
35 2R-Z3345 1 COUNTERBALANCE - SPLIT TOP
36 2V-Z3152 2 HANDLE - TACO BELL 2
37 2V-Z3252 2 TOP HOUSING LATCH ROD
38 B9-04-WB-0046 2 CLAMP WIRE SUPPORT
39 D9-GR0151 1 FACEPLATE ASSEMBLY
40 D9-Z2133 2 INSULATION FIBERGLASS TOP
41 D9-Z2618 1 BOTTOM ELEMENT RETAINING PLATE
42 D9-Z2619 1 BOTTOM INSULATION RETAINING PLATE
43 D9-Z2888 1 INSULATION - 14”
44 D9-GR0181 2 TOP HOUSING AND CONDUIT ASSEMBLY
D9-GR0522 BASE ASSY / GREASE CAB GR14SPTKG-CE, GR14SPTK-240
45 D9-GR0526 1

2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

BASE BOTTOM ASSY / GREASE CAB, 230V GR14SPTK-CE
D9-GR0531 BASE/GREASE CABINET ASSY GR14SPTKG240
46 D9-Z3902 2 PLATE - TOP ELEMENT RET.
47 Z1-70-07-0343 1 SWITCH GUARD
48 D9-GR0189 2 TOP BURN GUARD ASSEMBLY
49 D9-Z11677 1 INSULATION BAFFLE
50 D9-Z3826 1 INSULATION - BAFFLE
51 2A-Z6604 12 SPACER - INSULATION PLATE
52 2C-08-07-0285 12 SCREW, ELEMENT RET. PLATE
53 2C-Z2992 8 BOLT 1/4-20X1 PHP STL NP
54 2C-08-07-0262 8 WASHER 1/4 INT STL NP
55 2C-08-07-0040 8 NUT 1/4-20 ACHD STL NP
56 2C-Z2593 4 BOLT, 10-24x1 1/2 SL HX/W NP
57 2C-Z5883 8 SCREW, 10-24 X 1/2 FZA, SELF DRILLING

Star Manufacturing International, Inc.

10
 2M-Z9194 GR14SPTK SPLIT-LID TABLE TOP TWO SIDED TOASTER

11
12