AKU EKO
EC
› Diameter - 125 mm to 315 mm;
› Airflow up to 1640 m3/h;
CIRCULAR DUCT FANS
› Easily mounted in any position;
Features › Backward-curved impeller;
› Fan speed 100% controllable via 0-10 V signal;
› Energy efficient;
› Acoustically insulated.
Power supply 230V/50Hz/1f.
Temperature From -25OC up to 55OC/60OC.
range
Sizes 125, 160, 200, 250, 315.
› Casing: galvanized sheet steel;
› Acoustic and thermal wall insulation – 50mm;
› Fan: centrifugal impeller and external rotor motor;
Construction
› Motor protection integrated into motor electronics;
› Motor protection class: IP44/ IP54 (AKU EKO 315 only);
› Terminal box protection class: IP55.
› Mounting with ducts: Spiro, flexible aluminium or plastic.
Installation › Device can only be used indoors.
› Not suitable for polluted air or volatile and explosive gases.
› 10 kΩ potentiometer;
Speed control › External signal 0-10 VDC/PWM from user controller.
options
› Can be connected directly to optional constant pressure sensors, CO2, RH or an on/off switch.
AKU 125 EKO
Fans with EC motors
Diameter size
Product name
Accessories
0-10V speed controller Mounting clamp Guard grille Back draft shutter Circular duct silencer Filter cassette
MTP010 p. 128 AP p. 189 AGO p. 181 RSK p. 177 AKS p. 174 FD p. 169
28 The company reserves the right to make changes of technical data without prior notice
AKU EKO
Type Dimensions [mm]
B W H M N øD E F
CIRCULAR DUCT FANS
AKU 125 EKO 400 410 325 205 165,5 125 440 330
AKU 160 EKO 550 485 340 149 193 160 590 405
AKU 200 EKO 600 545 425 170 259,5 200 640 465
AKU 250 EKO 600 545 425 194 234,5 250 640 465
AKU 315 EKO 437 595 475 297,5 238 315 477 515
Type Accessories
MTP010 Stouch AP RSK AKS FD EKA S-RCO2-F2 S-RFF-U-D-F2
AGO FDI AVS S-KCO2 S-KFF-U
AKU 125 EKO MTP010 + 125 125 125 125 125 + +
AKU 160 EKO MTP010 + 160 160 160 160 160 + +
AKU 200 EKO MTP010 + 200 200 200 200 200 + +
AKU 250 EKO MTP010 + 250 250 250 250 250 + +
AKU 315 EKO MTP010 + 315 315 315 315 315 + +
Humidity sensor CO2 sensor
S-KFF-U p. 163 S-KCO2 p. 162
Filter cassette Electric duct heater Heating coil Controller Humidity sensor CO2 sensor
FDI p. 167 EKA p. 139 AVS p. 148 Stouch p. 130 S-RFF-U-D-F2 p. 163 S-RCO2-F2 p. 162
The company reserves the right to make changes of technical data without prior notice 29
AKU EKO
AKU 125 EKO
Static pressure [Pa]
AKU 160 EKO
AKU 200 EKO
Air flow [m3/h]
125 EKO 160 EKO 200 EKO
Voltage/Frequency [V/Hz] ~1, 230 ~1, 230 ~1, 230
Power consumption [kW] 0,053 0,114 0,195
Current [A] 0,4 0,99 1,45
CIRCULAR DUCT FANS
Speed [min-1] 4480 3490 3380
Max. airflow [m3/h] 308 630 1100
Min./Max. air temperature [°C] -20/50 -25/60 -25/45
Weight [kg] 12,3 19,0 25,0
Wiring diagram No. 1 No. 1 No. 3
Protection class: motor IP-44 IP-44 IP-44
terminal box IP-55 IP-55 IP-55
Impeller backwards curved backwards curved backwards curved
Inlet single single single
Comply with ERP 2016 2018 2018
125 EKO Lwa total, Lwa, dB(A)
dB(A) 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Inlet 59 41 54 56 45 45 40 44
Outlet 65 43 58 62 57 57 52 49
Surrounding 47 28 43 44 36 34 31 29
Measured at 207 m3/h, 95 Pa
160 EKO Lwa total, Lwa, dB(A)
dB(A) 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Inlet 65 49 63 60 49 51 48 46
Outlet 74 52 68 70 67 64 61 58
Surrounding 54 36 52 49 42 41 38 36
Measured at 413 m3/h, 211 Pa
200 EKO Lwa total, Lwa, dB(A)
dB(A) 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Inlet 68 52 66 60 56 54 51 52
Outlet 80 56 74 76 74 69 64 63
Surrounding 58 39 56 52 49 45 41 42
Measured at 805 m3/h, 170 Pa
The fan characteristic curves were determined in accordance with EN ISO 5801. The sound levels were determined in accordance with DIN 45635 resp. ISO 3744 at a distance of 1 m from the fan.
30 The company reserves the right to make changes of technical data without prior notice
AKU EKO
AKU 250 EKO
Static pressure [Pa]
AKU 315 EKO
Air flow [m3/h]
250 EKO 315 EKO
Voltage/Frequency [V/Hz] ~1, 230 ~1, 230
Power consumption [kW] 0,213 0,400
Current [A] 1,69 3,00
CIRCULAR DUCT FANS
Speed [min-1] 3220 3400
Max. airflow [m3/h] 1167 1642
Min./Max. air temperature [°C] -20/60 -25/55
Weight [kg] 25,0 31,0
Wiring diagram No. 1 No. 2
Protection class: motor IP-44 IP-54
terminal box IP-55 IP-55
Impeller backward curved backward curved
Inlet single single
Comply with ERP 2018 2018
250 EKO Lwa total, Lwa, dB(A)
dB(A) 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Inlet 73 57 70 64 66 59 53 52
Outlet 84 62 77 80 78 73 68 64
Surrounding 63 45 60 56 56 49 44 42
Measured at 1049 m3/h, 120 Pa
315 EKO Lwa total, Lwa, dB(A)
dB(A) 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Inlet 76 59 73 67 68 65 58 55
Outlet 87 64 75 84 81 76 72 67
Surrounding 65 47 61 60 58 54 48 45
Measured at 1553 m3/h, 120 Pa
The fan characteristic curves were determined in accordance with EN ISO 5801. The sound levels were determined in accordance with DIN 45635 resp. ISO 3744 at a distance of 1 m from the fan.
The company reserves the right to make changes of technical data without prior notice 31
AKU EKO
PE - yellow-green
Wiring diagram No. 1 (1~230V) BU - blue
BN - brown
YE - yellow
WH - white
RD - red
BN/BK - brown/black
Wiring diagram No. 2 (1~230V)
CIRCULAR DUCT FANS
Wiring diagram No. 3 (1~230V)
32 The company reserves the right to make changes of technical data without prior notice
