www.kentusa.

com

CNC Precision Lathes

CNC ∙ CRL ∙ CNL ∙ CSC ∙ CHL ∙ CHC Series

CNC

CRL

CNL

CSC

CHL

CHC
Efficient, Accurate Power Turret Tailstock
• The electric H4 turret is • Rigid construction and increased
driven by a worm gear throat depth on tailstock with
mechanism for convenient MT #4 interior taper quill. When
tool change. It is powered applying manual 4-way tool post,
by a 375W motor with great electric H4 turret or hydraulic P8
clamping force up to 1 ton. turret, it allows free cutting of long
• Spceially designed post workpieces.
body prevents coolant and • When preferring manual drilling,
chips getting into post. Body the quill can be set to zero for drill
will not move up and down depth measurement.
during indexing,
• Can be optionally equipped with a hydraulic quill to automatically
• P8 hydraulic turret and quick change tool post are available upon forward and reverse.
request.

MODEL CNC-1440 CNC-1640 CNC-1660

No. of Control Axis 2 Axis
Swing Over Bed 14.17” 16.14”
Distance between centers 35.82” 55.9”
Maximum 4-Way Tool Post 27.55” 47.63”
CAPACITY Working
Length Hyd. P8 Turret N/A 26.77” 46.85”

Maximum 4-Way Tool Post 6.7” 8.66”

Working
Diameter Hyd. P8 Turret N/A 8.27”

Width of Bed 10.236”

HEADSTOCK Spindle Nose, Internal Taper ASA A2-5, 52mm Taper 1/19.18
& Spindle Bore 1.811” / 1.417”
MAIN SPINDLE Spindle Speed 40-5000 RPM
4-Way Tool Post 8.07” 8.5”
X-Axis Travel
Hyd P8 Turret N/A 7”
4-Way Tool Post 34” 54”
Z-AxisTravel
CROSS SLIDE Hyd P8 Turret N/A 27.95” 48.03”
(X-AXIS) AC Servo Motor (X-Axis) 0.75kW 3.5 N.m
&
AC Servo Motor (Z-Axis) 1.2kW 7.0 N.m
CARRIAGE
Diameter of Ball Screw (X-Axis) 0.787” P5 C5
(Z-AXIS)
Diameter of Ball Screw (Z-Axis) 1.259” P10 C5
Rapid Traverse Speed (X- Axis) 7.5m / min
Rapid Traverse Speed (Z-Axis) 10m / min
Tool Station Manual 4-way Tool Post (Optional Electric H4 or Hydraulic P8 Turrets)
TURRET Size of External Turning Tool 0.787”
Boring Bar Diameter 0.787”

Manual Quill Diameter 2.283”

TAILSTOCK Style Quill Travel 5.5
Taper of Center MT No. 4
Main Spindle Motor STD 5.5KW/7.5KW (Optional 7.5KW/11KW)
MOTOR Hydraulic Oil Pump Optional 1HP, Optional 2HP
Coolant Pump 1/6 HP
Hydraulic Tank Optional 40 L
TANK CAPACITY
Coolant Tank 50 L 70 L
Weight (Net / Gross) Approx. 2100kgs / 2600kgs 2150kgs / 2650kgs 2250kgs / 2750kgs
MEASUREMENTS Packing Length 105.51” 125.6”
Size Width x Height 79.92” x 86.61”
Note: Specification and design subject to change without prior notice.

Standard Accessories Optional Accessories

CNC Controller Electric H4 Turret Drill Chuck & Arbor Quill Diameter 63
Hydraulic Chuck Hydraulic P8 Turret High Pressure Coolant Quill Travel 76mm
Dead Center MT4 with Carbide Tip Boring Socket Pump 3bar 750W Chip Conveyor & Chip
Leveling Pads Drilling Socket Quick Change Tool Post Bucket Cart
Toolset and Box Steady Rest Rotating Center MT 4 Hydraulic Hollow Chuck
Machine Light Follow Rest Hydraulic Tailstock Quill CNC Controller Fagor
8040TC
 Efficient, Accurate Power Turret Massive Bed and Carriage
• The electric H4 turret is • Strong, stable, wider bed
driven by a worm gear way which is vibration
mechanism for convenient absorbent. The entire
tool change. It is powered bed features outstanding
by a 375W motor with great structural rigidity.
clamping force up to 1 ton. • Dovetailed carriage and
• Spceially designed post cross slide are hardened,
body prevents coolant and high precision ground,
chips getting into post. Body coated with Turcite-B and
will not move up and down scrape finished to ensure
during indexing. uniform surfaces.
• P8 hydraulic turret and quick change tool post are available • Forced auto lubrication on X,Z axis ball screws
upon request. ensures longer resistance to wear.

MODEL CRL-1440 CRL-1640 CRL-1660

No. of Control Axis 2 Axis
Swing Over Bed 14.17” 16.14”
STD. D1-6 distance between centers 35” 55”
Maximum 4-way Tool Post 29.52” 49.61”
CAPACITY Working
Length Hyd. P8 Turret N/A 24.80” 44.88”

Maximum 4-way Tool Post 6.7” 8.66”

Working
Diameter Hyd. P8 Turret N/A 8.27”

Width of Bed 10.236”

HEADSTOCK Spindle Nose, Internal Taper D1-6, MT No. 6 (Optional A1-6, MT No. 6)
& Spindle Bore 2.066” (Optional 2”)
MAIN SPINDLE Spindle Speed 25-3000 RPM (2 Steps)
Cross Slide Travel (X-Axis) STD. 8.07” 8.5”
Longitudinal Travel (Z-Axis) STD. 32.08” 52.16”
CROSS SLIDE AC Servo Motor (X-Axis) 0.45kW 2.84 N.m
(X-AXIS) AC Servo Motor (Z-Axis) 0.85kW 5.39 N.m
&
Diameter of Ball Screw (X-Axis) 0.787” P5 C5
CARRIAGE
(Z-AXIS) Diameter of Ball Screw (Z-Axis) 1.259” P10 C5
Rapid Traverse Speed (X- Axis) 5m / min
Rapid Traverse Speed (Z-Axis) 7.5m / min
Tool Station Manual 4-way Tool Post (Optional Electric H4 or Hydraulic P8 Turrets)
TURRET Size of External Turning Tool 0.787”
Boring Bar Diameter 0.787”

Manual Quill Diameter 2.283”

TAILSTOCK Style Quill Travel 5.5”
Taper of Center MT No. 4
Main Spindle Motor Inverter Motor AC 5HP, Inverter 7.5HP
Hydraulic Oil Pump Optional 1HP, Optional 2HP
MOTOR
Forced Lubrication of Headstock 1/4 HP
Coolant Pump 1/6 HP
Hydraulic Tank Optional 25 L Optional 40 L
TANK CAPACITY
Coolant Tank 50 L 70 L
Weight (Net / Gross) Approx. 2100kgs / 2600kgs 2150kgs / 2650kgs 2250kgs / 2750kgs
MEASUREMENTS Packing Length 97.24” 117.32”
Size Width x Height 79.92” x 86.61”
Note: Specification and design subject to change without prior notice.

Standard Accessories Optional Accessories

CNC Controller 3-Jaw Chuck Steady Rest Rotating Center MT 4
Dead Center MT4 with Carbine Tip 4-Jaw Chuck Follow Rest Hydraulic Tailstock Quill
Leveling Pads Electric H4 Turret High Pressure Coolant Chip Conveyor & Chip
Toolset and Box Hydraulic P8 Turret Pump 3bar 750W Bucket Cart
Machine Light Boring Socket Quick Change Tool Post Hydraulic Hollow Chuck
Operation Manual and Parts List Drilling Socket Drill Chuck & Arbor
Headstock (Gears and Bearings) Tailstock
• Headstock gears and bearings • Rigid construction and increased
are supplied with oil delivered by throat depth on tailstock with
a pump attached to take on the MT #4 interior taper quill. When
rear plinth. applying manual 4-way tool post,
• A distributor within the headstock electric H4 turret or hydraulic P8
supplies oil to the drive gears and turret, it allows free cutting of long
bearings. workpieces.
• When preferring manual drilling,
the quill can be set to zero for drill
depth measurement.
• Can be optionally equipped with a hydraulic quill to
automatically forward and reverse.

MODEL CNL-1740 CNL-1760

No. of Control Axis 2 Axis
Swing Over Bed 17.12”
STD. D1-6 distance between centers 37.40” 57.08”
Maximum 4-way Tool Post 31.50” 51.18”
CAPACITY Working
Length Hyd. P8 Turret 25.59” 45.27”
Maximum 4-way Tool Post 9.45”
Working
Diameter Hyd. P8 Turret 8.27”
Width of Bed 12”

HEADSTOCK Spindle Nose, Internal Taper D1-6, MT No. 6 (Optional A1-6, MT No. 6)
& Spindle Bore 2.066” (Optional 2”)
MAIN SPINDLE Spindle Speed 30-2800 RPM (2 Steps)
Cross Slide Travel (X-Axis) STD. 9.05”
Longitudinal Travel (Z-Axis) STD. 35.43” 55.11”
CROSS SLIDE AC Servo Motor (X-Axis) 0.85kW 5.39 N.m
(X-AXIS) AC Servo Motor (Z-Axis) 1.3kW 8.34 N.m
&
Diameter of Ball Screw (X-Axis) 0.787” P5 C5
CARRIAGE
(Z-AXIS) Diameter of Ball Screw (Z-Axis) 1.57” P10 C5
Rapid Traverse Speed (X- Axis) 5m / min
Rapid Traverse Speed (Z-Axis) 7.5m / min
Tool Station Manual 4-way Tool Post (Optional Electric H4 or Hydraulic P8 Turrets)
TURRET Size of External Turning Tool 0.787”
Boring Bar Diameter 0.787”

Manual Quill Diameter 2.677”

TAILSTOCK Style Quill Travel 6”
Taper of Center MT No. 4
Main Spindle Motor Inverter Motor AC 7.5HP, Inverter 10HP
Hydraulic Oil Pump Optional 1HP, Optional 2HP
MOTOR
Forced Lubrication of Headstock 1/4 HP
Coolant Pump 1/6 HP
Hydraulic Tank Optional 25 L Optional 40 L
TANK CAPACITY
Coolant Tank 60 L 85 L
Weight (Net / Gross) Approx. 2150kgs / 2650kgs 2400kgs / 2900kgs
MEASUREMENTS Packing Length 104.72” 124.4”
Size Width x Height 79.33” x 88.2”
Note: Specification and design subject to change without prior notice.

Standard Accessories Optional Accessories

CNC Controller 3-Jaw Chuck Steady Rest Rotating Center MT 4
Dead Center MT4 with Carbine Tip 4-Jaw Chuck Follow Rest Hydraulic Tailstock Quill
Leveling Pads Electric H4 Turret High Pressure Coolant Chip Conveyor & Chip
Toolset and Box Hydraulic P8 Turret Pump 3bar 750W Conveyor Cart
Machine Light Boring Socket Quick Change Tool Post Hydraulic Hollow Chuck
Operation Manual and Parts List Drilling Socket Drill Chuck & Arbor Chuck Safety Guard
 Model L1 L2 L3
Gearless Spindle CSC-1840 59.3” 87” 150.4”
CSC-1860 78.9” 106.7” 170.1”
• The spindle is supported by a • Encased in a well-ribbed
single cylinder bearing housing headstock for maximum heat
equipped with SP level precision dissipation. Prevents any thermal
angular contract thrust bearings distortion afer long periods of
and lubricated with HI-class turning, thereby ensuring accurate
grease. The front spindle is cutting.
designed with a labyrinthian collar
and protector cover to prevent
coolant or chips from entering.

MODEL CSC-1840 CSC-1860

No. of Control Axis 2 Axis
Swing Over Bed 18.11”
Swing Over Cross Slide 10”
STD. A1-6 distance between centers 37.40” 57.08”

CAPACITY STD. A1-6 Max. 4-way Tool Post 31.50” 51.18”

Working Length Hyd. P8 Turret 25.59” 45.27”
4-way Tool Post Std. 10” Max. 16”
Maximum Working
Diameter Hyd. P8 Turret Std. 10” Max. 12.2”
Width of Bed 12”

HEADSTOCK Spindle Nose, Internal Taper A2-6, 2.7” Taper 1/20

& Spindle Bore 2.56”
MAIN SPINDLE Spindle Speed 40-4000 RPM (Infinitely Variable)
Cross Slide Travel (X-Axis) STD. 9.56”
Longitudinal Travel (Z-Axis) STD. 33.46” 53.15”
CROSS SLIDE AC Servo Motor (X-Axis) 7.0N.m - FANUC β8 / 3000is
(X-AXIS) AC Servo Motor (Z-Axis) 7.0N.m - FANUC β8 / 3000is
&
Diameter of Ball Screw (X-Axis) 0.787” P5 C5
CARRIAGE
Diameter of Ball Screw (Z-Axis) 1.57” P10 C5
(Z-AXIS)
Rapid Traverse Speed (X- Axis) 7.5m / min
Rapid Traverse Speed (Z-Axis) 10m / min
Tool Station Electric H4 or Hydraulic P8 Turrets
TURRET Size of External Turning Tool 0.787”
Boring Bar Diameter 0.787”
Quill Diameter 2.677”
Manual Style
TAILSTOCK Quill Travel 6”
Taper of Center MT No. 4
Main Spindle Motor (Continuous Rated) STD. AC11kW (15HP) - FANUC β8 / 3000is
Hydraulic Oil Pump Optional 1HP, Optional 2HP
MOTOR
Forced Lubrication of Headstock 1/4 HP
Coolant Pump 1/6 HP
Hydraulic Tank Optional 25 L Optional 40 L
TANK CAPACITY
Coolant Tank 60 L 85 L
Weight (Net / Gross) Approx. 2150kgs / 2650kgs 2400kgs / 2900kgs
MEASUREMENTS Length 112.6” 132.3”
Packing Size
Width x Height 83.3” x 92.1”
Note: Specification and design subject to change without prior notice.

Standard Accessories Optional Accessories

CNC Controller Hydraulic P8 Turret Drilling Socket High Pressure Coolant
Leveling Pads Boring Bar Holder Steady Rest w/ Ball Pump (3 boxes)
Toolset and Box (20mm - 2 sets) Bearing Drill Chuck & Arbor
Machine Light Boring Bar Holder Follow rest w/ Bronze Chip conveyor & Cart
Operation Manual and Parts List (25mm - 1 set) Tip CE Mark
3-jaw Hydraulic Chuck 8” OD Tool Holder (3 sets) Transformer CS Axis w/ Live Tooling
Roating Center ID Tool Holder (1 set) Hydraulic Tailstock Quill System, P8
Fuly Enclosed Sheet Metal Boring Socket
Enlarged saddles and fully supported cross slides Headstock
(x-axis) • Four gear range of spindle speeds driven
• Bed ways and cross slide are by built-in AC motor. The operator can
hardened and grounded to input the required spindle speed by M
min HS70. code, and the spindle will automatically
• Turcite B coating between the reach the required speed.
bed and carriage • The headstock has forced oil lubrication,
with lubricant pumped from a large tank
to maintain constant temperature.

• The 3 ultra-precision bearing spindle support maintains stability in heavy

cuts. D3.15” spindle bore through diameter shafts.
• ASA A2-8 short taper for power chuck or Cam-Lock D1-8 spindle nose for
quick and accurate chuck mounting.

MODEL CHL-2140 CHL-2160 CHL-2180 CHL-21120

No. of Control Axis 2 Axis
Swing Over Bed 20.98”
STD. D1-6 distance between centers 33.27” 52.95” 72.64” 112”
4-Way Tool Post 24.41” 44.09” 63.78” 103.1”
CAPACITY Maximum Working
Hyd. P8 Turret 20.87” 40.55” 60.24” 99.61”
Length
Elec. VDI Turret 19.29” 38.98” 58.66” 98.03”
Maximum Working Diameter 12”
Width of Bed 13.58”
Spindle Nose, Internal Taper D 1-8 (Optional A2-8), 85mm Taper 1/19.18
HEADSTOCK Spindle Center Sleeve 85mm, Taper 1/19.18 x MT No. 5
&
Spindle Bore 3.149”
MAIN SPINDLE
Spindle Speed 20-2000 RPM (4 Steps)
Cross Slide Travel (X-Axis) STD. 11.8”
Longitudinal Travel (Z-Axis) STD. 28.3” 48.0” 67.7” 107.1”
CROSS SLIDE AC Servo Motor (X-Axis) 1.3kW 8.34 N.m
(X-AXIS) AC Servo Motor (Z-Axis) 2.9kW 18.6 N.m
&
Diameter of Ball Screw (X-Axis) 0.98” P5 C5
CARRIAGE
(Z-AXIS) Diameter of Ball Screw (Z-Axis) 1.97” P10 C5 2.48” P10 C5
Rapid Traverse Speed (X- Axis) 7.5m / min
Rapid Traverse Speed (Z-Axis) 10m / min
Tool Station Manual 4-way Tool Post (Optional Electric VDI V8 or Hydraulic P8 Turrets)
TURRET Size of External Turning Tool 0.98”
Boring Bar Diameter 1.575” 1.26”
Quill Diameter 3.346”
Manual Style
TAILSTOCK Quill Travel 7”
Taper of Center MT No. 5
Main Spindle Inverter Motor AC 15 HP, Inverter 15 HP
Hydraulic Oil Pump 1 HP / 2 HP
MOTOR
Forced Lubrication of Headstock 60 W
Coolant Pump 1/6 HP
Hydraulic Tank 25 L (Optional 40 L)
TANK CAPACITY
Coolant Tank 60 L 120 L 180 L 240 L
4050kgs 4400kgs 4800kgs 5300kgs
Weight (Net / Gross) Approx.
/ 4450kgs / 4900kgs / 5400kgs / 6000kgs
MEASUREMENTS Length 126” 145.7” 165.4” 204.7”
Packing Size
Width x Height 90.6” x 88.2”
Note: Specification and design subject to change without prior notice.

Standard Accessories Optional Accessories

CNC Controller 3-Jaw Scroll Chuck Steady Rest Rotating Center MT 5
Dead Center MT5 with Carbide Tip 4-Jaw Independent Follow Rest Manual Quill Feed
Leveling Pads Chuck High Pressure Coolant Hydraulic Tailstock Quill
Toolset and Box Electric VDI40 Turret Pump 3bar 750W Chip Conveyor & Chip
Machine Light Hydraulic P8 Turret Quick Change Tool Post Bucket Cart
Operation Manual and Parts List Boring Socket Drill Chuck & Arbor Hydraulic Hollow Chuck
Drilling Socket
 Convenient Manual Control Spindle
• Providing convenient manual • The main spindle motor is direct
control for X, Y axes. Moveable driven. The spindle is supported
operation control box is also by a single cycle bearing housing
equipped with a remote manual equipped with SP level preci-
pulse generator. sion double row cylindrical roller
• Comprehensive, waterproof bearings / angular contact thrust
function keys and push buttons bearings and lubricated with HI-
enhance operational convenience. class grease. The front spindle is
designed with a labyrinthian collar
and protector cover to prevent the
entering of coolant or chips.

MODEL CHC-2240 CHC-2260 CHC-2280 CHC-22120

No. of Control Axis 2 Axis
Swing Over Bed 21.653”
STD. D1-6 distance between centers 34.25” 53.93” 73.62” 113”
4-Way Tool Post 26.77” 46.45” 66.14” 105.5”
CAPACITY Maximum Working
Hyd. P8 Turret 23.22” 42.91” 62.60” 102”
Length
Elec. VDI Turret 21.65” 41.33” 61.02” 100.4”
Maximum Working Diameter 12.8”
Width of Bed 13.58”

HEADSTOCK Spindle Nose, Internal Taper ASA A2-8, 97mm Taper 1/20
& Spindle Bore 3.582” / 3.07”
MAIN SPINDLE Spindle Speed 35-3500 RPM
Cross Slide Travel (X-Axis) STD. 11.8”
Longitudinal Travel (Z-Axis) STD. 30.7” 50.4” 70.1” 109.4”
CROSS SLIDE AC Servo Motor (X-Axis) 1.8kW 11 N.m
(X-AXIS) AC Servo Motor (Z-Axis) 2.5kW 20 N.m
&
Diameter of Ball Screw (X-Axis) 0.98” P5 C5
CARRIAGE
(Z-AXIS) Diameter of Ball Screw (Z-Axis) 1.97” P10 C5 2.48” P10 C5
Rapid Traverse Speed (X- Axis) 7.5m / min
Rapid Traverse Speed (Z-Axis) 10m / min
Tool Station Manual 4-way Tool Post (Optional Electric VDI V8 or Hydraulic P8 Turrets)
TURRET Size of External Turning Tool 25mm
Boring Bar Diameter 1.575” 1.26”
Quill Diameter 3.346”
Manual Style
TAILSTOCK Quill Travel 7”
Taper of Center MT No. 5
Main Spindle (Continuous) AC 12HP, Wide Range, Heavy Duty FANUC AC Spindle Motor
Main Spindle (30 min. rated) AC15HP Model 6000
MOTOR
Hydraulic Oil Pump 1 HP / 2 HP
Coolant Pump 1/6 HP
Hydraulic Tank 25 L (Optional 40 L)
TANK CAPACITY
Coolant Tank 60 L 120 L 180 L 240 L
4050kgs 4400kgs 4800kgs 5300kgs
Weight (Net / Gross) Approx.
/ 4450kgs / 4900kgs / 5400kgs / 6000kgs
MEASUREMENTS Length 126” 145.7” 165.4” 204.7”
Packing Size
Width x Height 90.6” x 87.8”
Note: Specification and design subject to change without prior notice.

Standard Accessories Optional Accessories

CNC Controller Electric VDI Turret Follow Rest Manual Quill Feed
Hydraulic Chuck Hydraulic P8 Turret High Pressure Coolant Rotating Center MT 5
Dead Center MT5 with Carbide Tip Boring Socket Pump 3bar 750W Hydraulic Tailstock Quill
Leveling Pads Drilling Socket Quick Change Tool Post Chip Conveyor & Chip
Toolset and Box Steady Rest Drill Chuck & Arbor Bucket Cart
Machine Light
Operation Manual & Parts List
 Kent Industrial USA, Inc.
1231 Edinger Ave., Tustin, CA 92780
Tel: (714) 258-8526 | Fax: (714) 258-8530
Toll-free: 1-800-KENT-USA (1-800-536-8372)
www.kentusa.com E-mail: [email protected]