Scribd
Upload
509 views1 page

Thermanit 17-06 (Boehler)

This document provides information on Thermanit 17/06, a basic covered electrode for welding and surfacing stainless steels and corrosion-resistant alloys containing 13-17% chromium and nickel. It can join materials like 1.4405 and 1.4418 stainless steel grades. The electrode provides corrosion resistance similar to the base materials and has higher resistance to corrosion fatigue than Thermanit 13/04. Preheating of 100-150°C is recommended for materials up to 10mm thick, and 150-200°C for thicker materials. The weld metal has a martensitic structure and can be quenched and tempered.

Uploaded by

queno1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
509 views1 page

Thermanit 17-06 (Boehler)

This document provides information on Thermanit 17/06, a basic covered electrode for welding and surfacing stainless steels and corrosion-resistant alloys containing 13-17% chromium and nickel. It can join materials like 1.4405 and 1.4418 stainless steel grades. The electrode provides corrosion resistance similar to the base materials and has higher resistance to corrosion fatigue than Thermanit 13/04. Preheating of 100-150°C is recommended for materials up to 10mm thick, and 150-200°C for thicker materials. The weld metal has a martensitic structure and can be quenched and tempered.

Uploaded by

queno1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Thermanit 17/06

Basic covered electrode

Classifications EN 1600 Mat. No.


E Z17 6 B 2 2 앒1.4405

Welding instruction
Characteristics Stainless. Corrosion resistant similar to matching steels/cast
and field of use steel grades. Higher resistance to corrosion and corrosion Materials Preheating Postweld heat treatment
fatigue cracking than Thermanit 13/04. Matching/similar Up to 10 mm wall thickness: Tempering or quenching
Joining and surfacing on matching 13 - 17 % Cr/Ni(Mo) steels/cast steel 100-150 °C (212-302 °F). and tempering according
steels/cast steel grades. grades Over 10 mm wall thickness: to parent metal
150-200 °C (302-392 °F)

Materials (G)X5CrNiMo16-5 (1.4405); X4CrNiMo16-5 (1.4418)


matching/similar soft martensitic forging and cast steels

Typical analysis C Si Mn Cr Mo Ni
in % Welding position Polarity = +
<0.04 0.3 0.5 17.0 1.0 5.5

Mechanical proper- Heat- Yield strength Tensile Elongation Impact values


ties of the weld treatment 0.2 % strength (L0=5d0) in J
metal according N/mm2 N/mm2 % CVN
to EN 1597-1 620°C / 4 h: 570 800 15 40
(min. values at RT)

Packaging, weights Dimensions (mm) pcs./pack kg/pack Amperage A


and amperages 3.2 x 350 160 5.0 70-110
Structure Martensite, suitable for quenching and tempering 4.0 x 350 110 5.0 90-140

118 Böhler Schweisstechnik Deutschland GmbH – 09_2005 Böhler Schweisstechnik Deutschland GmbH – 09_2005 119

You might also like