REPAIR AND PROTECT
YOUR DAMAGED ROOF
WITH EXPERT SOLUTIONS
THE RIGHT SOLUTION
Complete
Renovation,
Waterproofing
& Protection
= +
of Roofs
Repair Protection
THE RIGHT METHOD TO
REPAIR AND RENOVATE YOUR ROOF
Terracotta
Grey
White
a What Causes Cracks in your Roof / Terrace
• Regular changes in weather causes expansion and contraction
• Extreme vibrations nearby due to houses near airport or
busy roads
• Material quality used to lay the roof has deteriorated over
the years
b Need for Early Treatment
• Damaged patch is a sign that the roof needs immediate
renovation
• If left untreated or part repair is done, cracks will propogate and
damage the entire roof
• Cost of renovating a roof on time is fraction of a cost of the
damage caused to the structure and your interiors due to a
leaking roof
• Gradually, fungus is formed on damp roof, resulting in health
concerns for family
c Finishing Layers are not Sufficient Protection
• Tiling/China Mosaic is not waterproofing
• They have in-between joints, hence do not have capacity to
tolerate internal expansion/contraction of the structure,
resulting into cracks
BENEFITS OF WATERPROOFING WITH US
7
High elastic 7 years of
Can apply over and resilient product
existing surface coating YEARS warranty*
Resistant to Bridges cracks Foot trafficable
UV & weather up to 2 mm (no additional
conditions width coating)
HOW TO APPLY
Dr. Fixit Pidicrete URP
For existing terraces, check the substrate (brickbat coba/screed, etc.)
If the substrate is sound, go ahead with the procedure.
1 2 3 4
Clean surface to Identify cracks in Water the surface Fill cracks with
remove hidden surface. Deepen and ensure it is PMM (Polymer
dirt, loose each crack by thoroughly wet. Modified Mortar)
particles, cutting extreme Remove excess prepared by using
and dust edges to a depth water before Dr. Fixit URP.
of at least 10 mm. application.
Available in 200gm, 500gm, 1 kg, 5 kg, 10 kg, 20 kg and 50 kg
+
Dr. Fixit Newcoat
1 2 3 4
Use Dr. Fixit Apply first coat Brush-apply Brush-apply
Primeseal (primer of Dr. Fixit second coat in a third coat in a
coat). Dilute 2 Newcoat with direction direction
ltrs. of Dr. Fixit brush/roller over perpendicular to perpendicular to
Primeseal with primed surface. the first coat. the second coat.
1 ltr. of water Do not mix water. Same coverage Same coverage
(2:1 ratio) [1 ltr covers & drying time as & drying time as
[1 ltr. covers 21 sq. ft.] first coat. first 2 coats.
7-8 sq. ft.] While it is wet,
place a glass
fibre mesh on it.
Drying time:
6-8 hrs.
Available in White Grey Terracotta
Sequence of the coats can depend on desired top coat colour
Available in 4 ltr and 20 ltr
Please contact your local Dr. Fixit dealer for latest prices.
PRECAUTIONS
• Both products must be used together for complete protection and in right dosage
for desired results.
• The slope during roof overlay must be maintained according to specifications
mentioned.
• Any gaps in tiling or china mosaic must be filled properly with grout.
• Never dilute Dr. Fixit Newcoat with water for ease of application.
• Must not apply during rains; substrate MUST be in saturated surface dry (SSD)
condition for primer application.
• The product is designed only for foot traffic and not vehicular or movement of
machinery or equipment.
• Do not apply Dr. Fixit Newcoat over moving joints.
• To achieve fullproof waterproofing, parapet walls should be covered with
Dr. Fixit Raincoat.
• Keep the packaging lid closed when material is not in use.
SMS <DF> to 57575 for Dr. Fixit Waterproofing Guide