0% found this document useful (0 votes)
127 views1 page

Optimum Reliability: Synchrotact 6

The document discusses how to achieve high levels of safety and availability for synchronizing devices used to synchronize circuit breakers. It recommends using a redundant, second synchronizing system so that if one system fails, it can be bypassed and the second system used instead. This is achieved by connecting the outputs of two automatic dual-channel synchronizing devices in series, and including selector switches to bridge a defective device for repair while keeping the other device in service.

Uploaded by

Žarko Močnik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
127 views1 page

Optimum Reliability: Synchrotact 6

The document discusses how to achieve high levels of safety and availability for synchronizing devices used to synchronize circuit breakers. It recommends using a redundant, second synchronizing system so that if one system fails, it can be bypassed and the second system used instead. This is achieved by connecting the outputs of two automatic dual-channel synchronizing devices in series, and including selector switches to bridge a defective device for repair while keeping the other device in service.

Uploaded by

Žarko Močnik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

11

1

SYNCHROTACT 6
Optimum reliability
Seite 10

For the availability of a plant a synchronizing device must TheSYN


series connection of the output contacts of a
6201
be able to carry out the synchronizing function whenever dual-channel system significantly increases safety of
Automatic
required. The circuit breaker is under no circumstances the plant, however the availability
synchronizing SYNof6200
the overall system
permitted to close during nonsynchronous conditions. might reduce.
Synchrocheck

S18031
Seite 10
Seite 10
SYN 6201
SYN 6201 SYN 6202
Automatic
Automatic
synchronizing SYN 6200 Automatic
Synchrocheck
synchronizing SYN 6200 synchronizing
Synchrocheck
Synchrocheck
SYN 6200
S18031
S18031
Synchrocheck
S18032

SYN 6202
SYN 6202
Automatic
High levels of safety and availability can be achieved by SYN 6302 Device 1
Automatic Synchrocheck
using asynchronizing Synchrochecksystem. If system
second, redundant synchronizing Automatic
synchronizing Synchrocheck
1 can no longer synchronize, it is still possible to do so by synchronizing
SYNsystem.
switching over to the second 6200
SYN 6200
Synchrocheck
Synchrocheck Device 2
S18032
Automatic
S18032 Synchrocheck
synchronizing
SYN 6302 Device 1 S18025
SYN 6302 Device 1
Automatic
Automatic Synchrocheck
synchronizing Synchrocheck
synchronizing

Device 2
Device 2
Automatic
Automatic Synchrocheck
synchronizing Synchrocheck
synchronizing S18025
S18025

In this configuration, two automatic dual-channel devices


are used. Normally, the output contacts of both devices are
connected in series (4 channels!). One of the two devices
can be bridged by means of the device selector switches on
each device, or remotely by a control signal. The defective
device may be removed (eg, for repair) while the other
remains in service.

You might also like