Scribd
Upload
106 views2 pages

MK7 - Common Faults1

The document describes common faults, symptoms, reasons, and recommended actions for repairs of an MK7-400 device. It lists 3 main faults - no output voltages caused by an open resistor or capacitors, no visible damage caused by a faulty diode, and many burnt parts next to transistors caused by shorted transistors. Repairs include replacing faulty components like resistors, capacitors, diodes, transistors, and transformers and checking for open windings or short circuits.

Uploaded by

Chalez Zengeretsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
106 views2 pages

MK7 - Common Faults1

The document describes common faults, symptoms, reasons, and recommended actions for repairs of an MK7-400 device. It lists 3 main faults - no output voltages caused by an open resistor or capacitors, no visible damage caused by a faulty diode, and many burnt parts next to transistors caused by shorted transistors. Repairs include replacing faulty components like resistors, capacitors, diodes, transistors, and transformers and checking for open windings or short circuits.

Uploaded by

Chalez Zengeretsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

MK7-400

Common Faults

Symptoms Reason Action


1.Replace faulty resistor
( one of R18-R22)

No output Voltages. C18 or One of R18-R22 is


1 2.Replace both C18 and
C19 is swelling open circuit
C19
3.Check and replace if faulty
F3, S3, R5, R6
1.Replace faulty diode (D12
or D24 )
No visible damage. One of 2.Check if winding 4-5 (in T1
2 D12 or D24 faulty
D12 or D24 is shorted if D12 faulty, or in T2 if D24
faulty) is not open. Replace
faulty transformer.

1.Replace Q3

2.Replace D11
3.Replace D10
4.Replace U1
5.Test and replace if faulty:
Many parts are burnt out 5.1 Q2
3 Q3 is shorted
next to Q3 5.2. Q1

5.3. D2

5.4 R122-R125, R126-R129


5.5. S3, F3, R5,R6, Q10,
Q11, U5, U3
6.Replace R37-R43,R130-
R133

1.Replace Q8

Many parts are burnt out


3 Q8 is shorted
next to Q8 2.Replace D22
3.Replace D23
4.Replace U5, R95-R102,
R135, R136
Comments

Has to be the same value and voltage.


Allowed brands:Nichicon, Nippon,
Panasonic, Rubycon

This is fast 1000V 1A diode RS1M

It is recommended to replace
corresponded transformer even it winding
4-5 is not open
Use 2SK2611, IRFPF50P, 2SK2487A
only
This is 30V 1A schottky Diode. Use
MBRS130, MBRS140, B130, B140,
SK13b, STPS130only
This is 30V schottky Diode BAT54

IPW60R125CP only
PNP 100V 1A FZT53
This is 40V 1A schottky Diode . Use
STPS140, MBRS140, 10BQ040

Use 2SK2611, IRFPF50P, 2SK2487A


only
This is 30V 1A schottky Diode. Use
MBRS130, MBRS140, B130, B140,
SK13b, STPS130only
This is 30V schottky Diode BAT54

You might also like