______Instruction for iPhone
_
Brief introduction
The documents mainly introduces how to set and use the Software for iPhone OS.
The Software has some main functions.
1 、Browse real time video function
2、Cloud stand control function(the front end is to control ball machine)
Essential condition
Need iOS 3.0 or higher release, the cellular phone includes iPhone, the iPod touch waits
Install and operating instructions
Circulate iPhone App Store procedure, cut over the huning label page, search to input TMEye+ in
the column, will find out to apply a procedure setup to wrap, click to carry on a setup then.The
following chart
Will appear a routing diagram mark after the setup, the following chart
Click TMEye+ routing diagram mark, circulate a beginning to start interface the following chart
after the procedure
Press button vs in response to the function is as follows
Function key name
Function describe
The procedure connectivity equipment
play
combines to start broadcasting a video
Grasp to clap a current ICON(grasp a chart
document to recognize tacitly conservancy to
snap
the cellular phone of tacit approval of
photograph catalog bottom.)
Establish a DVR IP address or watch an area,
setting port, user's name and password and equipment
alias information
Up group Can select up the gang gateway
Next group Can select to descend gang gateway
about About information
Select a some video of one gateway that
broadcasts an equipment.Can carry out eight
Select gateway
roads, 16 road gateways to cut over
with"descend gang" team work
Carry out a cloud on the stage, next, left and
PTZ control
right control
Zoom ratio The realize tension far draws near
focus Carry out focal length to add and subtract
aperture Carry out diaphragm to add and subtract
5）Such as first time use or need to carry on parameter to change, please click 【setup 】button
enter a parameter equipment control interface.The following chart
：Enter to add an equipment interface as follows
1. .Add an equipment:
Explain
Equipment denomination(Alias):The alias of equipment is easy to classify several
equipments。
Server address(Address):
DVR male net IP address or dynamic state area
Server port(Port):DVR up the server port of setup。
User's name(User ID):The user's name reconciliation that carries a setup with IE。
Password(Password):The password reconciliation that carries a setup with IE
The gateway counts:(MaxChannel):the equipment total number of gateways
2.Delete an equipment:
Lightly sweep a certain record, click again 【delete 】button , can immediately delete
an equipment, the following chart:
7）Watch video and display mode
1.Return lord interface
2. Click one menu respectively up of, enter an equipment tabulator interface, the spread
equipment gateway, the following chart, then after clicking gateway, automatically enter to broadcast
lord interface, other three menus strobe the operation can immediately watch four menus at the same
time.
8）Down the routine mode and full plate mode progress cuts over
1.Normal mode
2.Full plate mode
When the handle machine lays down horizontally will the automatic full plate broadcast
7）The gateway cuts over
Pick out homologous gateway, the procedure will open homologous gateway to combine to
automatically broadcast a video.The procedure tacit approval will display 1~4 gateways bottom, win an
election amid when the next gang gateway press button will gateway will cut over to 5~8, 8-12,12-16
cyclic transformation cutover
The DVR parameter that favors a cellular phone establishes a reference
Resolution:CIF or QCIF
Leads:5-10
The code flows a type:Limit
The code flows:64-256Kb/S
Note:Can carry on tune according to the cellular phone performance and the network
condition.Higher cellular phone performance and network condition can display better effect.If the
network condition is worse, can appropriately the step - down lead and assure flowing freely
