Item No.

Specifiction Unit Rate

10 WATER PROOFING
10.1 KSRB 10-2 : Providing and laying in position yelahanka tiles of size 250 x 250mm of approved quality
and make, over a bed of cement mortar 1:3 an average thickness 25mm over weather proof course
and pointed with cement mortar 1:3 mix with red oxide including curing cost of materials, labour
complete as per specifications. Specification No. KBS (BSCR 2015-16 - Item No. - 10.1, Page No. 66
)
Sqm 816.00
10.2 KSRB 10-3 : Providing and laying integral cement based waterproofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces etc., consisting of
following application. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with proprietary water proofing compound conforming to IS:2645 over the RCC slab
after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats
25mm to 100mm size with 50% of cement mortar 1:5 admixed with proprietary water proofing
compound conforming IS:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary
water proofing compound to required slope and treating similarly the adjoining walls upto 300mm
height including rounding off junctions of walls and slabs. (c) After two days of proper curing, applying
a second coat of cement lurry admixed with proprietary water proofing compound (d) Finishing the
surface with 20mm thick jointless cement mortar of mix 1:4 admixed with proprietary water proofing
compound and finally finishing the surface with trowel and neat cement slurry and making of
300x300mm square. (e) The whole terrace so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test including cost of materials, labour complete as per
specifications. (BSCR 2015-16 - Item No. - 10.2, Page No. 66 )

Sqm 858.00
10.3 KSRB 10-4 : Providing and laying four courses water proofing treatment with bitumen felt over roof
consisting of first and third courses of blown and / or residual bitumen applied hot at 1.45 kg / sqm of
area for each course second course of roofing felt Type - 3 grade-I ( hessian based self finish
bitumen felt ) and forth and final course of stone grit 6mm and down size or pea sized gravel spread
at 0.06 cum. / sqm including preparation of surface but excluding grading complete with bitumen felt (
hessian based ) Type - 3 grade-I blown or / and residual bitumen applied hot 1.4 kg / sqm including
cost of materials, labour complete as per specifications. KBS 10.4.3 (BSCR 2015-16 - Item No. -
10.3, Page No. 66 )

Sqm 343.00
10.4 KSRB 10-5 : Providing and laying six courses water proofing treatment with bitumen felt over roof
consisting of first, third and fifth courses of blown and / or residual bitumen applied hot at 1.45 kg,
1.2kg and 1.7kg / sqm of area respectively, second and fourth courses of roofing felt Type -2 grade-I
( fibre based self finish bitumen felt ) and sixth and final course of stone grit 6mm and down size or
pea sized gravel spread at 0.06 cum. / sqm including preparation of surface, excluding grading but
including cost of materials, labour complete as per specifications. KBS 10.4.3 (BSCR 2015-16 - Item
No. - 10.4, Page No. 66 )

Sqm 603.00
10.5.1 Waterproofing of RCC Terrace / podium slab / toilet / utilities / water retaining structure by preparing
the surface by chipping and cleaning and Grouting of Honey comb, voids,cracks / construction joints
with cement slurry (1kg cement added in 10 ltr of water) added with 100gm of inorganic accelerator,
followed by spraying of liquid biological modified alkaline earth silicates @ 0.40 ltr per sqm on whole
surface to reduce the micro porosity and allowing it to dry, curing the surface for the silicates to
penetrate deeper into the concrete and spraying waterproofing impregnate liquid containing silane
and silanol linear copolymer @ 0.50 ltr per sqm and finally applying polymer slurry made out of cross
linked acrylic / styrene / butadiene & cement in the ratio of 1:0.1, @0.50kg/sqm on the whole surface,
including all labour charges tools and equipments, all complete as per the specification (BSCR 2015-
16 - Item No. - 10.5.1, Page No. 67 )

Sqm 590.00
10.5.2 Bore Packing : filling the bore wherever necessary with polymer modified concrete and brushing one
coat of acrylic copolymer cross linked formulation on the bore. including all labour charges tools and
equipments, all complete as per the manufacturer (BSCR 2015-16 - Item No. - 10.5.2, Page No. 67 )

Sqm 242.00
10.5.3 Extra for water proofing the inside surface of tanks (OHT & UGT) - applying of modified polymers soft
acrylic esters coat @0.40 kg/sqm in 2 coats including all labour charges tools and equipments, all
complete as per the specification. (BSCR 2015-16 - Item No. - 10.5.3, Page No. 67 )

Sqm 285.00
10.6 Providing and fixing food grade epoxy painting to over head tank and sump tank after cleaning and
drying including pumping and bailing out of water, including cost of all materials labour lead and lifts
etc., complete (BSCR 2015-16 - Item No. - 10.6, Page No. 67 )
Sqm 100.00
10.7 Cleaning RCCsump tanks and RCC overhead tanks with mechanical dewatering including removal of
sludge, mud, dirt, algea etc and cleanuing the wall surface of tanks using high pressure jet, vacuum
cleaning and spraying anti bacterial treatment to the wall and ceiling surfaces and UV treatment,
including removing of sludge etc., using suitable coconut broomstick, squeesers / wipers / rubber
brushes, coir brushes, plastic buckets, mugs, dewatering using motor with portal arrangement, hose
pipe etc., complete including all safety measures. (BSCR 2015-16 - Item No. - 10.7, Page No. 67 )

L 0.50
10.8 Providing and applying composite water proofing compound as impregnate only on wet surfaces to
arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces
apart from water tanks, sumps, reservoirs, by mixing the composite waterproofing compound with
water in ratio of 1:10 to make a workable slurry and pouring it on all cleaned and prepared corners
and disturbed area and further mixing in the ratio 1:20 AND pouring it on the prepared surface by
cleaning the surface with etchant chemical from dirt foreign materials etc., and allowing it to be there
upto 3 hours and then cleaning the same using water complete as per specification so that the
surface is got back and ready to use after 4 hours. (BSCR 2015-16 - Item No. - 10.8, Page No. 67 )

Sqm 547.00

1 / 67
ELECTRICAL SCHEDULE OF RATES - 2014-15
Item No. Specification Unit Rate (`)
CHAPTER 1 - PVC CONDUICT & ITS ACCESSORIES
1.1 Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size
bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone
structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of
700mm using NF screws.
1.1.1 19/20mm dia 2mm thick Mtr 54.00
1.1.2 25mm dia 2mm thick Mtr 70.00
1.1.3 32mm dia 2.5mm thick Mtr 100.00
1.1.4 40mm dia 2.5mm thick Mtr 114.00
1.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable
size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the
reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end
enclosures, run with 18SWG GI fish wire wherever necessary
1.2.1 19/20mm dia 2mm thick Mtr 43.00
1.2.2 25mm dia 2mm thick Mtr 57.00
1.2.3 32mm dia 2.5mm thick Mtr 90.00
1.2.4 40mm dia 2.5mm thick Mtr 102.00
1.3 Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by
groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.
1.3.1 19/20mm dia 2mm thick Mtr 56.00
1.3.2 25mm dia 2mm thick Mtr 58.00
1.3.3 32mm dia 2.5mm thick Mtr 88.00
1.3.4 40mm dia 2.5mm thick Mtr 101.00
1.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with
one coat of primer of approved make etc.
1.4.1 75x75x65mm Each 94.00
1.4.2 100x75x65mm Each 96.00
1.4.3 135x75x65mm Each 102.00
1.4.4 180x90x65mm Each 110.00
1.4.5 200x90x65mm Each 120.00
1.4.6 135x160x65mm Each 118.00
1.4.7 200x200x65mm Each 157.00
1.5 Supplying and fixing PVC/metal conduit Deep junction box
1.5.1 19/20mm deep junction box Each 47.00
BANGALORE CIRCLE ELECTRICAL SR 2014-15 2 / 67
 1.5.2 25mm deep junction box Each 51.00
1.5.3 32mm deep junction box Each 65.00
1.6 Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting,
Finishing with necessary cement plastering complete.
1.6.1 12"x12"x3" (300x300x76mm) Each 116.00
1.6.2 12"x9"x3" (300x228x76) Each 98.00
1.6.3 10"x7"x3" (254x178x76mm) Each 87.00
1.6.4 8"x6"x3" (203x152x76mm) Each 73.00
1.6.5 4"x4"x3" ( 101x101x76mm) Each 68.00
1.6.6 1 to 2 Way Each 37.00
1.6.7 3 to 4 Way Each 46.00
1.6.8 5 to 6 Way Each 51.00
1.7 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall
surface complete.
1.7.1 upto 50mm conduit in brick wall Mtr 21.00
1.7.2 upto 50mm conduit CC floor Mtr 38.00
1.8 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of
300mm …. etc. as required.
1.8.1 20mm Mtr 24.00
1.8.2 25mm Mtr 26.00
1.8.3 32mm Mtr 35.00
1.8.4 38mm Mtr 39.00
1.8.5 50mm Mtr 43.00
1.9 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and
clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely

1.9.1 20mm Mtr 23.00

1.9.2 25mm Mtr 30.00
1.9.3 32mm Mtr 36.00
1.9.4 38mm Mtr 46.00
1.9.5 50mm Mtr 56.00
1.10 Supplying And Fixing "S" Hook made out of 14mm dia M.S.Rod. No 36.00
1.11 Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14mm M.S. rod. No 83.00
1.12 Supplying And Fixing Metal Fan Box with Round Hook. No 92.00
CHAPTER 2 - WIRES & CABLES

BANGALORE CIRCLE ELECTRICAL SR 2014-15 3 / 67

 2.1 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using
1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a
6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be
terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A

2.1.1 Short point upto 3Mtr from tapping point to out let via switch Point 174.00
2.1.2 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 245.00
2.1.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 363.00
2.1.4 Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches Point 482.00
2.1.5 Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches Point 682.00
2.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using
1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a
6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be
terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP B

2.2.1 Short point upto 3Mtr from tapping point to out let via switch Point 159.00
2.2.2 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 220.00
2.2.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 321.00
2.2.4 Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches Point 428.00
2.2.5 Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches Point 603.00
2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping
using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without
switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet.
GROUP A
2.3.1 Short point upto 3Mtr from tapping point to out let via switch box Point 144.00
2.3.2 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 215.00
2.3.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 334.00
2.3.4 Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches Point 423.00
2.3.5 Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches box Point 593.00
2.4 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping
using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without
switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each
outlet.GROUP B
2.4.1 Short point upto 3Mtr from tapping point to out let via switch box Point 130.00
2.4.2 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 190.00
2.4.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 291.00
2.4.4 Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches Point 368.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 4 / 67

 2.4.5 Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches Point 514.00
2.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance
single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.

2.5.1 1 sqmm. Mtr. 13.00

2.5.2 1.5 sqmm Mtr. 18.60
2.5.3 2.5 sqmm Mtr. 29.20
2.5.4 4 sqmm Mtr. 42.10
2.5.5 6 sqmm Mtr. 63.80
2.5.6 10 sqmm Mtr. 108.00
2.5.7 16 sqmm Mtr. 171.00
2.6 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core wire in
open or concealed system of wiring as per IS-694:1990 & confirming to GTP of GROUP -B.
2.6.1 1 sqmm. Mtr. 10.75
2.6.2 1.5 sqmm Mtr. 15.90
2.6.3 2.5 sqmm Mtr. 24.90
2.6.4 4 sqmm Mtr. 36.30
2.6.5 6 sqmm Mtr. 53.20
2.6.6 10 sqmm Mtr. 85.40
2.6.7 16 sqmm Mtr. 132.60
2.7 Supplying and drawing PVC flexible copper wire of approved make in place of deteriorated wire.
2.7.1 14/0.0039" Mtr. 6.00
2.7.2 23/0.0075” Mtr. 8.75
2.7.3 40/0.0039" Mtr. 14.00
2.7.4 23/0.0060" Mtr. 8.00
2.8 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to
table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for working voltage upto 1100Volts as per IS-
694:1990 & confirming to GTP of GROUP-A.
2.8.1 2C X 1.5Sq.mm Mtr. 37.00
2.8.2 3C X 1.5Sq.mm Mtr. 51.90
2.8.3 4C X 1.5Sq.mm Mtr. 67.00
2.8.4 6C X 1.5Sq.mm Mtr. 143.60
2.8.5 8C X 1.5Sq.mm Mtr. 184.90
2.8.6 10C X 1.5Sq.mm Mtr. 240.80
2.8.7 2C X 2.5Sq.mm Mtr. 59.10
2.8.8 3C X 2.5Sq.mm Mtr. 81.60
2.8.9 4C X 2.5Sq.mm Mtr. 105.90

BANGALORE CIRCLE ELECTRICAL SR 2014-15 5 / 67

 2.8.10 6C X 2.5Sq.mm Mtr. 228.90
2.8.11 8C X 2.5Sq.mm Mtr. 295.00
2.8.12 10C X 2.5Sq.mm Mtr. 375.40
2.9 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade copper with flexible copper conductor confirming
to table 3 class 5 of IS:8130-1984 and PVC insulation and sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 &
confirming to GTP of GROUP-B.
2.9.1 2C X 1.5Sq.mm Mtr. 32.00
2.9.2 3C X 1.5Sq.mm Mtr. 44.40
2.9.3 4C X 1.5Sq.mm Mtr. 58.60
2.9.4 6C X 1.5Sq.mm Mtr. 96.20
2.9.5 8C X 1.5Sq.mm Mtr. 116.10
2.9.6 10C X 1.5Sq.mm Mtr. 158.00
2.9.7 2C X 2.5Sq.mm Mtr. 50.80
2.9.8 3C X 2.5Sq.mm Mtr. 70.00
2.9.9 4C X 2.5Sq.mm Mtr. 93.40
2.9.10 6C X 2.5Sq.mm Mtr. 155.80
2.9.11 8C X 2.5Sq.mm Mtr. 185.70
2.9.12 10C X 2.5Sq.mm Mtr. 256.60
2.10 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible
copper with low resistance conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder
coating extruded PVC sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-A

2.10.1 3C X 1.5Sq.mm Mtr. 56.70

2.10.2 3C X 2.5Sq.mm Mtr. 86.30
2.10.3 3C X 4.0Sq.mm Mtr. 126.70
2.10.4 3C X 6.0Sq.mm Mtr. 188.70
2.11 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible
copper conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC
sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-B.

2.11.1 3C X 1.5Sq.mm Mtr. 50.20

2.11.2 3C X 2.5Sq.mm Mtr. 75.90
2.11.3 3C X 4.0Sq.mm Mtr. 110.70
2.11.4 3C X 6.0Sq.mm Mtr. 163.50

2.12 Wiring for lighting / power circuit using one of pvc insulated 1100v grade stranded aluminum unsheathed wire single core cable in
open or concealed system of wiring as per IS - 694 : 1990

BANGALORE CIRCLE ELECTRICAL SR 2014-15 6 / 67

 2.12.1 4sq mm Mtr. 7.50
2.12.2 6sq mm Mtr. 9.50
2.12.3 10sq mm Mtr. 15.00
CHAPTER 3 - SWITCHES, SOCKETS & ACCESSORIES
3.1 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick
plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and
IS 3654
3.1.1 6Amps 2 Way Each 127.00
3.1.2 6Amps 3/5 Way Each 150.00
3.2 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm Each 171.00
thick plastic sheet and mounted on a flush mounted wooden box and wiring as per IS 1293
3.3.A Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic
plates/nitches as per IS 1293 and IS 3854 GROUP A
3.3.A.1 32Amps Flush/projected type DP switch Each 187.00
3.3.A.2 16Amps Flush type SP switch Each 99.00
3.3.A.3 16Amps Flush type Universal socket Each 99.00
3.3.A.4 16Combined switch and socket with indication Each 194.00
3.3.A.5 Electronic stepped regulator. Each 211.00
3.3.B Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic
plates/nitches as per IS 1293 and IS 3854 GROUP B
3.3.B.6 32Amps Flush/projected type DP switch Each 150.00
3.3.B.7 16Amps Flush type SP switch Each 79.00
3.3.B.8 16Amps Flush type Universal socket Each 79.00
3.3.B.9 16Combined switch and socket with indication Each 157.00
3.3.B.10 Electronic stepped regulator. Each 172.00
3.4 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due
groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.
3.4.1 1-3Way Each 83.00
3.4.2 4-5Way Each 102.00
3.4.3 6-8Way Each 133.00
3.4.4 10-12Way Each 152.00
3.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be
firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
3.5.1 1-3Way Each 91.00
3.5.2 4-5Way Each 98.00
3.5.3 6Way Each 121.00
3.5.4 8Way Each 140.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 7 / 67

 3.5.5 10-12Way Each 159.00
3.5.6 16Way Each 172.00
3.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
3.6.1 1 to 3 Module Each 109.00
3.6.2 4 Module Each 122.00
3.6.3 6 Module Each 173.00
3.6.4 8 Module Each 200.00
3.6.5 10 Module Each 227.00
3.6.6 12 Module Each 267.00
3.7.A Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular
switch plate as per IS 3854 and IS 1293 GROUP A
3.7.A.1 6Amps one way. Each 63.00
3.7.A.2 6Amps Two way. Each 87.00
3.7.A.3 6Amps 3way socket. Each 95.00
3.7.A.4 Stepped Fan Regulator. Each 286.00
3.7.A.5 600Watts Dimmer Each 285.00
3.7.A.6 1000-1200Watts Dimmer Each 539.00
3.7.A.7 16Amps one way switch Each 114.00
3.7.A.8 6Amps Bell push Each 87.00
3.7.A.9 32Amps DP switch Each 164.00
3.7.A.10 6/16Amps universal socket Each 147.00
3.7.A.11 TV/Telephone socket Each 82.00
3.7.A.12 RJ45/ I.O. outlet Each 204.00
3.7.B Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular
switch plate as per IS 3854 and IS 1293 GROUP B
3.7.B.13 6Amps one way. Each 50.00
3.7.B.14 6Amps Two way. Each 70.00
3.7.B.15 6Amps 3way socket. Each 77.00
3.7.B.16 Stepped Fan Regulator. Each 236.00
3.7.B.17 600Watts Dimmer Each 235.00
3.7.B.18 1000-1200Watts Dimmer Each 447.00
3.7.B.19 16Amps one way switch Each 92.00
3.7.B.20 6Amps Bell push Each 70.00
3.7.B.21 32Amps DP switch Each 134.00
3.7.B.22 6/16Amps universal socket Each 120.00
3.7.B.23 TV/Telephone socket Each 67.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 8 / 67

 3.7.B.24 RJ45/ I.O. outlet Each 167.00
3.8 Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply &
completely wired on existing box.
3.8.1 Group 'A' Each 168.00
3.8.2 Group 'B' Each 137.00
3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal Sq CM 0.25
box using N.F. screws.
3.10 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing Sq CM 0.22
wood or metal box using N.F. screws.
3.11 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine
screws.
3.11.1 80mm No 9.00
3.11.2 110mm No 11.00
3.12 Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. No 6.80

3.13 Supplying….way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws.
3.13.1 1 way gang box No 16.00
3.13.2 2 to 4 way gang box No 29.00
3.13.3 6 to 10 way gang box No 53.00
3.14.A Supplying and fixing of metal clad industrial plugs and sockets. PLUG 2pole+earth 250V
3.14.A.1 10 Amps Each 205.00
3.14.A.2 20 Amps Each 223.00
3.14.B Supplying and fixing of metal clad industrial plugs and sockets. PLUG 3pole+earth 440V
3.14.B.3 20 Amps Each 281.00
3.14.B.4 30 Amps Each 307.00
3.14.C Supplying and fixing of metal clad industrial plugs and sockets.SOCKET 2pole+earth 250V
3.14.C.5 10 Amps Each 205.00
3.14.C.6 20 Amps Each 223.00
3.14.D Supplying and fixing of metal clad industrial plugs and sockets.SOCKET 3pole+earth 440V
3.14.D.7 20 Amps Each 281.00
3.14.D.8 30 Amps Each 307.00
3.15.A Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. GROUP A
3.15.A.1 6Amps SP Switch No 35.00
3.15.A.2 6Amps 2way Switch No 49.00
3.15.A.3 6Amps 3 way 5 pin Socket No 53.00
3.15.A.4 6Amps 3 pin Top No 51.00
3.15.A.5 6Amps Bakelite ceiling rose No 43.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 9 / 67

 3.15.A.6 6 Amps lamp holder No 48.00
3.15.A.7 6 Amps bell push No 48.00
3.15.A.8 6 Amps bell buzzer No 117.00
3.15.A.9 16 Amps SP switch No 89.00
3.15.A.10 16 Amps 3 way 5 pin socket No 94.00
3.15.A.11 16 Amps 3 pin top No 77.00
3.15.A.12 32 Amps Bakelite DP No 156.00
3.15.A.13 16/6 Amps combined plug and socket with control switch No 268.00
3.15.B Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. GROUP B
3.15.B.14 6Amps SP Switch No 27.00
3.15.B.15 6Amps 2way Switch No 39.00
3.15.B.16 6Amps 3 way 5 pin Socket No 42.00
3.15.B.17 6Amps 3 pin Top No 41.00
3.15.B.18 6Amps Bakelite ceiling rose No 34.00
3.15.B.19 6 Amps lamp holder No 38.00
3.15.B.20 6 Amps bell push No 39.00
3.15.B.21 6 Amps bell buzzer No 95.00
3.15.B.22 16 Amps SP switch No 72.00
3.15.B.23 16 Amps 3 way 5 pin socket No 77.00
3.15.B.24 16 Amps 3 pin top No 62.00
3.15.B.25 32 Amps Bakelite DP No 128.00
3.15.B.26 16/6 Amps combined plug and socket wit control switch No 220.00
CHAPTER 4 - LUMINAIRS / LIGHT FIXTURES & ACCESSORIES

4.1 Supplying and fixing drop light using one PBBC/Bakelite pendent holder, PVC insulated twin twisted copper wire of 10/0.3mm length Each 121.00
upto 1000mm, one of 60/100 watts lamp of 230 volts grade and one of 5 amps Bakelite ceiling rose fixed on the existing wooden
block of the outlet.
4.2 Supplying and fixing PBBC/Bakelite straight or slant batten holder and wiring with 60w/230 volts lamps. Each 88.00
4.3 Supplying and fixing cast Aluminum round or oblong type bulk head fitting with GI wire guard, glass cover with 60/100 watts 230V Each 747.00
GLS lamp.
4.4 Supplying and fixing cast Aluminum round or oblong type bulk head fitting with GI wire guard, glass cover with 15Watts 230V CFL Each 952.00
lamp.
4.5 Supplying patti type fluorescent tube light fitting of 2' - suitable for 14 watts fluorescent tube fitting, made out of M.S. Sheet and stove Each 591.00
enameled with HF Electronic Ballast , locking type brass contact holders mounted on double fold type sheet base fully wired for use
on 230 volts AC . Supply including T5 lamp.

BANGALORE CIRCLE ELECTRICAL SR 2014-15 10 / 67

 4.6 Supplying patti type fluorescent tube light fitting of 4' -suitable for 28 watts fluorescent tube fitting, made out of M.S. Sheet and stove Each 669.00
enameled with HF Electronic Ballast , locking type brass contact holders mounted on double fold type sheet base fully wired for use
on 230 volts AC . Supply including T5 lamp.
4.7 Supplying box type suitable for 28W T5 single / twin Lamp & suspension mounted luminaire & optical reflector. Prewired with HF
electronic Ballast, push fit type lamp holders & main connectors. Channel cover shall be made of CRCA MS Sheet and finishing is
done with stove enameled white with end caps made of engineering plastic.
4.7.1 1x4'-28 Watts Each 990.00
4.7.2 2x4'-28 Watts Each 1,680.00
4.8 Supplying industrial box type suitable for 28W T5 single / twin Lamp along with stove enameled white reflector & suspension mounted
luminaire & optical reflector. Prewired with HF electronic Ballast, push fit type lamp holders & main connectors. Channel cover shall
be made of CRCA MS Sheet and finishing is done with stove enameled white with end caps made of engineering plastic.

4.8.1 1x4'-28Watts Each 1,290.00

4.8.2 2x4'-28Watts Each 2,070.00
4.9 Supplying surface mounted type mirror optic luminaries for single/Twin 28watts fluorescent lamps cross rising of stove enameled
deep coloured M.S.low profile housing complete with all accessories and high purity anodized aluminum reflector assembling along
with cross louvers including necessary fluorescent tubes with Energy Saving Electronic Ballast.

4.9.1 1x4'-28Watts Each 2,743.00

4.9.2 2x4'-28Watts Each 4,028.00
4.10 Supply of Horizontal type Street light fluorescent fitting suitable for single/twin lamp of 24W/28W FTL T5 lamp. Housing shall be with
pressure die cast aluminum with UV Protected clear acrylic diffuser with thermoformed & CRCA gear tray, push fit poly carbonate
lamp holder, low loss high frequency electronic ballast with IP 54 protection.
4.10.1 2x4'-28Watts Each 1,866.00
4.10.2 2x4'-28Watts Each 2,101.00
4.11 Supplying of recessed/surface mount aesthetic 2'x2' modular luminaries made out of single piece powder coated CRCA sheet steel
accommodating all electrical accessories like Energy Saving Electronic Ballast suitable to operate on 230V 50Hz AC supply with
36Watts CFL-compact fluorescent lamp, pre-wired up to terminal block with bright anodized aluminum reflector & P5 paralite louvers
with spring loaded plastic toggles.
4.11.1 2x36Watts Each 4,755.00
4.11.2 3x36Watts Each 5,865.00
4.12 Supplying 70Watts MH integral post top lantern Metal halide fitting suitable for pole mounted with fully vermin, weather proof, elegant Each 6,724.00
in shape, appearance, UV stabilized clear acrylic diffusers, camouflaged horizontal lamp, holder and lamp, IP 54 protection. Electrical
safety class 1. The fitting shall have ferromagnetic copper choke with capacitor, igniter and fully wired to operate on 230V 50Hz AC
Supply with 70Watts MH Lamp.

BANGALORE CIRCLE ELECTRICAL SR 2014-15 11 / 67

 4.13 Supply of Post Top Lantern suitable for .......W CFL lamp, housing & frame shall be of powder coated, die cast aluminum, diffuser with
high density polyethylene IP65 EPDM Gasket. Electronic ballast. Body shall be with aluminum extrusion with lamp & ballast replaced
from top - nominal voltage of 230V.

BANGALORE CIRCLE ELECTRICAL SR 2014-15 12 / 67

 4.13.1 1x18 Watts Each 2,522.00
4.13.2 2x18 Watts Each 3,673.00
4.13.3 3x18 Watts Each 3,793.00
4.14 Supplying High pressure Mercury vapour street light fitting deep drawn die cast aluminum canopy with aluminum housing for control
gear, finished with stove enamel gray glassy white canopy interior and a pair of anodized aluminum reflectors, clear acrylic bowl,
gasket lining for drip inset resistance, duly wired with porcelain holder, heavy duty low loss copper wound ballast, igniter and HPF
condenser including a mercury vapour lamp.
4.14.1 125Watts Each 3,764.00
4.14.3 250Watts Each 5,122.00
4.15 Supplying High pressure Sodium Vapour street light luminaire 150Watts suitable for use with high pressure Sodium Vapour lamp with Each 5,613.00
integrated control gear & grey color powder coated. The fitting shall be non corrosive pressure die cast aluminum housing with high
purity anodized aluminum reflector with EPDM Gaskets suitable for Outer Dia of pole 40mm - 60mm. Cable Entry through a cable
gland with toggle clips. IP65 Protection for both optical & Electrical Compartment. Bottom cover may be with Poly
carbonate/tempered/ toughened glass. Luminaire efficiency should be >60% & ambient temperature > 35 deg C. High Intensity
Discharge Electro Magnetic Ballast with Copper winding of Orthocyclic winding coil. Class H insulated dual coated copper wire.
Compliance to IEC 61347-2-9 Safety & IEC 60923 - Performance. Winding Temperate for HID Ballast Tw = 130 deg C & temperature
rise ?T = 70 deg C. Luminaire shall be suitable to operate on 230/250 Volts 50 Hz AC supply including wiring, ignitor, condenser. SS
Toggles for opening front hingeable glass.

4.16 Supplying High pressure Sodium Vapour street light luminaire 250Watts suitable for use with high pressure Sodium Vapour lamp with Each 6,900.00
integrated control gear & grey color power coated. The fitting shall be non corrosive pressure die cast aluminum housing with high
purity anodized aluminum reflector with EPDM Gaskets suitable for Outer Dia of pole 40mm - 60mm. Cable Entry through a cable
gland with toggle clips. IP65 Protection for both optical & Electrical Compartment. Bottom cover may be with Poly
carbonate/tempered/ toughened glass. Luminaire efficiency should be >60% & ambient temperature > 35 deg C. High Intensity
Discharge Electro Magnetic Ballast with Copper winding of Orthocyclic winding coil. Class H insulated dual coated copper wire.
Compliance to IEC 61347-2-9 Safety & IEC 60923 - Performance. Winding Temperature for HID Ballast Tw = 130 deg C &
temperature rise ?T = 70 deg C. Luminaire shall be suitable to operate on 230/250 Volts finish including wiring, suitable to operate on
230/250 Volts 50 Hz AC supply finish including wiring, ignitor, condenser. SS Toggles for opening front hingeable glass.

BANGALORE CIRCLE ELECTRICAL SR 2014-15 13 / 67

 4.17 Supplying High pressure Metal Halide street light luminaire suitable for use with high pressure metal halide lamp with integrated
control gear & grey color power coated. The fitting shall be non corrosive pressure die cast aluminum housing with high purity
anodized aluminum reflector with EPDM Gaskets suitable for Outer Dia of pole 40mm - 60mm. Cable Entry through a cable gland
with toggle clips. IP65 Protection for both optical & Electrical Compartment. Bottom cover may be with Poly carbonate/tempered/
toughened glass. Luminaire efficiency should be >60% & ambient temperature > 35 deg C. High Intensity Discharge Electro Magnetic
Ballast with Copper winding of Orthocyclic winding coil. Class H insulated dual coated copper wire. Compliance to IEC 61347-2-9
Safety & IEC 60923 - Performance. Winding Temperature for HID Ballast Tw = 130 deg C & temperature rise ?T = 70 deg C.
Luminaire shall be suitable to operate on 230/250 Volts 50 Hz AC supply finish including wiring, ignitor, condenser. SS Toggles for
opening front hingeable glass.

4.17.1 70Watts Each 5,630.00

4.17.2 150Watts Each 6,300.00
4.17.3 250Watts Each 7,400.00
4.18 Supplying High pressure ....... Metal halide flood light luminary suitable for use with high pressure metal halide lamp with integrated
control gear. The fitting shall be non corrosive high pressure die cast aluminum housing powder coated with toughened and heat
resistant glass with low copper content black/grey powder coated paint finish with EPDM gasket. Reflector shall be made of high
purity pre-anodized aluminum. Cable entry through a cable gland with toggle clips. IP 65 protection for both and optical and electrical
compartment. Bottom cover may be with polycarbonate / tempered / toughened glass. Luminaire efficiency should be > 60% and
ambient temperature > 35 deg C. High intensity discharge Electro magnetic ballast with copper winding of Octocyclic winding coil.
Class H insulated dual coated copper wire. Compliance to IEC 61347-2-9 Safety and IEC 60923- performance. Winding temperature
for HID ballast tw = 130 deg C and temperature rise ?T - 70 deg C. Luminaire shall be suitable to operate on 230/250Volts 50Hz AC
supply finish including wiring, ignitor, condenser. SS Toggles for opening front hingeable glass, prewired to terminal block.

4.18.1 150Watts Each 6,699.00

4.18.2 250Watts Each 9,159.00
4.18.3 400Watts Each 10,311.00
4.18.4 2x250Watts Each 20,157.00
4.18.5 2x400Watts Each 22,800.00
4.19 Supplying Halogen Lamps fitting complete with lamp. The fitting shall be non corrosive high pressure die cast aluminum housing with
low copper content grey powder coated finish including wiring, suitable to operate on 230/250Volts 50Hz AC supply with halogen
lamp.
4.19.1 500Watts Each 1,458.00
4.19.2 1000Watts Each 2,610.00
4.20 Supplying of recessed/surface mount aesthetic Square / rectangular modular luminary made out of single piece powder coated CRCA
sheet steel accommodating all electrical accessories like electronic ballast suitable to operate on 230V 50Hz AC supply with 18Watts
PLL-compact fluorescent lamp, pre-wired upto terminal block with bright anodized aluminum reflector & P5 paralite louvers with spring
loaded plastic toggles.
4.20.1 1x18Watts Each 1,724.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 14 / 67

 4.20.2 2x18Watts Each 1,939.00
4.21 Supplying of recessed mount down light luminary made out of single piece powder coated CRCA sheet steel accommodating all
electrical accessories like electronic ballast suitable to operate on 230V 50Hz AC supply with 18Watts PLL-compact fluorescent lamp,
pre-wired up to terminal block with super aluminum textured reflector & P5 paralite louvers with spring loaded dropped glass.

4.21.1 1x18Watts Each 1,278.00

4.21.2 2x18Watts Each 1,570.00
4.22 Supplying of heavy duty water tight, under water luminary with corrosion resistant, nickel plated brass housing with flange on the top, Each 4,800.00
2 cable entries at the bottom with double compression water tight brass gland, clear glass cover with rubber gasket on both sides
mounted in a brass frame. Glass cover assembly fixed to the flange with 6Nos SS bolts and fly nuts ES lamp holder on a bracket
suitable for 120W 230Volts Par/reflector lamp, prewired with Teflon sleeve up to the terminal block with 100/120W Par light lamp.

4.23 Supplying CFL mirror light fitting with 1x11W CFL lamp, choke, Perspex cover and completely wired for use on 230V 50Hz AC supply. Each 648.00

4.24 Supplying of slim box type fluorescent fitting, made out of PVC Body with 28W Energy Saving Device, less than 10% T.H.D, pf > 0.90, Each 670.00
auto cut off facility locking type holder 1 No of 4’-28W fluorescent tube and completely wired for use on 90V to 350V grade 50 cycle
AC supply.
4.25 Supply High pressure Metal halide down light luminary suitable for use with high pressure 70Watts metal halide lamp with integrated Each 2,956.00
control gear. The fitting shall be non corrosive high pressure die cast aluminum housing with low copper content black powder coated
finish including frosted / clear toughened glass, wiring suitable to operate on 230/250Volts 50Hz AC supply with HP metal halide
lamps
4.26 Supplying of .......... bay integral induction luminary fittings die cast aluminum base with suitable prewired electronic control gear to
operate on170 to 250V 50Hz AC Supply and suitable wattage induction lamp. The fitting should have fitted with toughened
transparent glass bottom etc. completely. The body of the fitting shall be finished with black/grey powder coated paint with enclosure
conforming to IP54 specifications.
4.26.1 70Watts Each 22,860.00
4.26.2 150Watts Each 26,850.00
4.26.3 250Watts Each 31,660.00
4.27 Supplying of street light integral induction luminary fittings single piece die cast aluminum housing with full toughened glass, prewired
electronic control gear to operate on 120 to 230V 50Hz AC Supply and suitable wattage induction lamp. The body of the fitting shall
be finished with black/grey powder coated paint with enclosure conforming to IP65 specifications.

4.27.1 70Watts Each 20,400.00

4.27.2 120Watts Each 25,600.00
4.27.3 200Watts Each 31,600.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 15 / 67

 4.28 Supplying of 400Watts integral type flood light induction luminary fittings single piece die cast aluminum housing with full toughened Each 39,600.00
glass, electronic control gear to operate on 120 to 230V 50Hz AC Supply and suitable wattage induction lamp. The body of the fitting
shall be finished with black/grey powder coated paint complete. The Induction Lamp to be terminated within the fixture or into a
separate aluminum casing which is sealed by use of gasket lining. Fixture to have a metal clamp fixed to the sides for mounting
arrangement with enclosure conforming to IP65 specifications.
4.29 LED Indoor Supplying of 2' feet - LED PVC Square Batten ..W with high quality diffuser with Life of 25000 burning hours & 70% lumen
maintenance with CRI > 80. Power Input: 220-240V @ 50Hz & Power factor >0.9 along with CE approved drivers. 5 years Warranty
against any manufacturing defect working under standard electrical condition
4.29.1 LED light fighting 2' - 14 watts Each 1,400.00
4.29.2 LED light fighting 4' - 28 watts Each 1,774.00
4.30 LED Down light Supply of recess mounted rolling type LED Down light with 4/6W GU 10 LED Lamp Rib Fabricated from Die cast No 1,428.00
aluminum with white powder coated prewired to mains connector with suitable driver & having swiveling unit of aluminum die cast eye
ball & LED Lamp position retained by circular wire spring. 5 years Warranty against any manufacturing defect working under standard
electrical condition. LED square or round down light 5x1 watts
4.31 Supply of recess mounted rolling type LED square or round Down light 12 watts with 4/6W GU 10 LED Lamp Rib Fabricated from Die No 1,868.00
cast aluminum with white powder coated prewired to mains connector with suitable driver & having swiveling unit of aluminum die cast
eye ball & LED Lamp position retained by circular wire spring. 5 years Warranty against any manufacturing defect working under
standard electrical condition.
4.32 Supply of LED Square Recessed Down lighter with 18W System Wattage. Housing shall be with powder coated pressure die cast No 4,945.00
aluminum alloy with corrosion resistant polyester powder coat & with extended heat sink. Diffuser/cover made of Lexan plastic
material. Rated life shall be L70 @ 50000 Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit,
overload, open circuit & miswiring. Driver is on constant current driver output driver @ 0.06A with PF > 0.9 with line voltage @ 220-
240V @ 50/60Hz, driver efficiency > 85% & THD<15%. LED Efficiency > 130 lm/W at 1W & Fixture Efficiency >75lm/w with CRI > 75
with injection moulded Polycarbonate lens. 5 years Warranty against any manufacturing defect working under standard electrical
condition.

4.33 Supply of 2'x2' LED recessed luminaire with ...Watts system wattage. Housing shall be with pressure die cast aluminum alloy with
corrosion proof resistant polyester power coated. Driver operates with voltage range from 100V to 270V 50/60 Hz with short circuit,
overload & mis-wiring protection. Lumen Maintenance of 70% at 50000 Hrs. Injection moulded poly carbonate diffuser for better
mechanical stability, light transmission & avoid pot hole effect. Junction temperature shall be < 70 degree Celsius. Driver is on
constant current driver @ 0.06A with PF > 0.92 with line voltage @ 220-240V @ 50/60Hz, driver efficiency > 85% & THD<15%. LED
Efficiency > 130 lm/W at 1W & Fixture Efficiency >75lm/w with CRI > 75 with injection moulded Polycarbonate lens with < 80mm
depth. 5 years Warranty against any manufacturing defect working under standard electrical condition

4.33.1 LED modular down light 1'x1'-36 watts No 7,006.00

4.33.2 LED modular down light 2'x2'-36 watts No 8,242.00
4.33.3 LED modular down light 2'x2'-55 watts No 9,273.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 16 / 67

 4.34 LED Post Top Lantern GARDEN.Supply of LED Post Top Lantern with system ... wattage, housing & frame shall be of powder
coated, die cast aluminum, diffuser with high density polyethylene IP65 EPDM Gasket. Life 50000 Hrs. @ L70 shall be conforming to
IS 10322/Part 5/ Section 5 @ 230V. 5 years Warranty against any manufacturing defect working under standard electrical condition

4.34.1 LED Post Top Lantern with 12 watts No 7,204.00

4.34.2 LED Post Top Lantern with 24 watts No 15,930.00
4.35 LED Street light.Supply of LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal
dissipation. Diffuser with Injection moulded & is made of polycarbonate material with high transmission index, delivering superior light
output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%. CCT > 5500K, IP 66 optical and electrical compartment &
impact resistance of complete luminare > IK08. Power Factor >0.9 with mains Current should not be greater than 0.1A to 0.7A &
Surge Protection- Min 4KV along with Over voltage/Overload, short circuit/ miswiring protection. Compatible for pole mounting with
outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Over
load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79
& LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at
the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED
Efficiency>130lm/w at 1W & Fixture Efficiency >80lm/w with nominal CRI >75. Luminaire manufacturer should have in-house facility
accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing
with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any
manufacturing defect working under standard electrical conditions as mentioned above should be given by LED source manufacture.
Suitable for B1/B2 Roads as per IS 1944 Part I & Part II.

4.35.1 LED Streetlight 24watts No 6,912.00

4.35.2 LED Streetlight 43watts No 12,384.00
4.35.3 LED Streetlight 65watts No 18,720.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 17 / 67

 4.36 LED Street light. Supply of LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal
dissipation. Diffuser with Injection moulded & is made of polycarbonate material with high transmission index, delivering superior light
output. Rated life Burning Hrs. 50000 hr. @ Lumen Maintenance of 70%. CCT > 5500K, IP 66 optical and electrical compartment &
impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains Current should not be greater than 0.1A to 0.7A &
Surge Protection- Min 4 KV along with Over voltage/Overload, short circuit/ miswiring protection. Compatible for pole mounting with
outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Over
load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79
& LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at
the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED
Efficiency>130lm/w at 1W & Fixture Efficiency >80lm/w with nominal CRI 75+. housing with supplier word mark / name shall be
engraved / Embossing on the die cast housing / body part. . Luminaire manufacturer should have in-house facility accredited by
NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Warranty of 5 Years
against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED source
manufacturer. Suitable for A1/A2 Roads as per IS 1944 Part I & Part II.

4.36.1 90 Watts Each 31,250.00

4.36.2 110 Watts Each 34,240.00
4.36.3 150 Watts Each 43,000.00
4.36.4 180 Watts Each 54,000.00
4.37 LED Flood Light. Supplying of LED Floodlight with .......W System Power consumption pressure die cast aluminum housing with
powder coating with IP 65 protection. 1, 200-275V voltage with electronic Driver, PF>0.9, should meet ANSI 2G Vibration test,
Compliance to UL/CE with Class I. System rating shall be 50K hrs. @ Lumen maintenance of 70%, system efficacy > 80lm/w. Over
load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79
& LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at
the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED
Efficiency>130lm/w at 1W & Fixture Efficiency >80lm/w with nominal CRI >75. Luminaire manufacturer should have in-house facility
accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing
with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any
manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer.

4.37.1 LED Floodlight 60W No 7,129.00

4.37.2 LED Floodlight 90W No 14,646.00
4.37.3 LED Floodlight 110W No 17,593.00
4.37.4 LED Floodlight 150W No 23,577.00
4.38 Accessories

BANGALORE CIRCLE ELECTRICAL SR 2014-15 18 / 67

 4.38.1 14W T5 Fluorescent Tube: Supplying and fixing of T5 Fluorescent Tube with 14W power consumption with low 3mg Mercury content No 110.00
& below 40% glass content than T8 lamp & 20% less phosphor coating than T8 with initial lumen on 1250 (for 6500 deg Kelvin), 1350
(for 3000/4000 deg Kelvin) & rated Avg life (12 Hr. Cycle) of greater than 35000 burring hours.

4.38.2 28W T5 Fluorescent Tube: Supplying and fixing of T5 Fluorescent Tube with 28W power consumption with low 3mg Mercury content No 144.00
& below 40% glass content than T8 lamp & 20% less phosphor coating than T8 with initial lumen on 2900 (for 6500 deg Kelvin), 2700
(for 3000/4000 deg Kelvin) & rated Avg life (12 Hr. Cycle) of greater than 35000 burring hours

4.38.3 24W T5 Fluorescent Tube: Supplying and fixing of T5 Fluorescent Tube with 24W power consumption with low 3mg Mercury content No 144.00
& below 40% glass content than T8 lamp & 20% less phosphor coating than T8 with initial lumen on 1750 (for 6500 deg Kelvin), 1600
(for 3000/4000 deg Kelvin) & rated Avg life (12 Hr. Cycle) of greater than 35000 burring hours.

4.38.4 Supplying and fixing of round or oblong type bulk head fitting glass cover. No 55.00
4.38.5 2'/4' - 36/40 Watts Fluorescent Tubes: Supplying and fixing of 36W Fluorescent Tube with 36W power consumption with initial lumen No 48.00
of 2750 (3000 deg K / 4000 deg K) with rated avg life of greater than 10000 hrs.
4.38.6 Supplying and fixing of 5'-54 Watts of T5 Fluorescent Tube with 54W power consumption with low 3mg Mercury content & below 40% No 192.00
glass content than T8 lamp & 20% less phosphor coating than T8 with initial lumen on 3400 (for 6500 deg Kelvin), 3100 (for
3000/4000 deg Kelvin) & rated Avg life (12 Hr. Cycle) of greater than 35000 burring hours.
4.38.7 4' - 80W Fluorescent Tubes: Supplying and fixing of 4'-80W T5 Fluorescent Tube with 80W power consumption with low 3mg Mercury No 427.00
content & below 40% glass content than T8 suitable for 6500 deg Kelvin or for 3000/4000 deg Kelvin and rated Avg life (12 Hr. Cycle)
of greater than 20000 burring hours.
4.38.8 Supplying and fixing of 4' - 80W T5 Fluorescent colour Tube with 80W power consumption with low 3mg Mercury content & below No 427.00
40% glass content than T8 lamp & 20% less phosphor coating than T8 suitable for 6500 deg Kelvin or for 3000/4000 deg Kelvin
greater and rated Avg life (12 Hr. Cycle) of greater than 20000 burring hours.
4.38.9 Supplying and fixing 65/80 Watts heavy duty open construction ferromagnetic copper ballast for fluorescent tubes: 65/80 Watts heavy No 427.00
duty open construction Ferromagnetic copper ballast for fluorescent tubes, Class H Insulated copper wire, Vacuum impregnated high
quality with Low loss silicon steel lamination operated on 240V,50Hz supply with IEC 60920 (Safety) & IEC 60921(Performance)

4.38.10 Supplying and fixing of 20/40 Watts heavy duty open construction Ferromagnetic copper ballast for fluorescent tubes : Supplying and No 377.00
fixing of 20/40 Watts heavy duty open construction Ferromagnetic copper ballast for fluorescent tubes, Class H Insulated copper wire,
Vacuum impregnated high quality with Low loss silicon steel lamination operated on 240V,50Hz supply with IEC 60920 (Safety) & IEC
60921(Performance)
4.38.11 Supplying and fixing of Electronic Ballast suitable for T5 Lamp with housing made of Pre-coated steel/PC, Operating voltage range No 337.00
from 180V to 265V, flicker free warm start with over voltage protection, Inrush current protection, De-activated lamp protection & End
of Lamp life protection with PF> 0.95 & TC(deg C) > 65 deg C. compliance to EN 61347-2-3 (Safety), EN60929(Performance),
EN55015(EMI/RFI), EN61000-3-2 (Harmonics), EN 61547 (Surge)
4.38.12 Supplying of Special Type lamp upto 15Watts clear or coloured No 13.50

BANGALORE CIRCLE ELECTRICAL SR 2014-15 19 / 67

 4.38.13 Supplying ofSpecial Type pigmy and candle lamp No 14.00
4.38.14 Supplying ofSpecial Type Halogen lamps 500W No 70.00
4.38.15 Supplying of Special Type Halogen lamps 1000W No 86.00
4.38.16 Supplying of of 2 pin/4 pin 9-11W CFL Lamp No 80.00
4.38.17 Supplying of of 2 pin/4 pin 13/18W CFL Lamp No 107.00
4.38.18 Supplying of of 2 pin/4 pin 18W CFL Lamp No 120.00
4.38.19 Supplying of of 4 pin 36w CFL Lamp No 145.00
4.38.20 Supply of 80W Mercury Vapour lamp with E27 Base, Lumen output greater than 3500 lumen & CRI 45.Avg Burning life greater than No 150.00
20,000 hrs.
4.38.21 Supply of 125W Mercury Vapour lamp with E27 Base, Lumen output greater than 6000 lumen & CRI 45.Avg Burning life greater than No 164.00
20,000 hrs.
4.38.22 Supply of 160W Mercury Vapour lamp with E27 Base, Lumen output greater than 12500 lumen & CRI 45.Avg Burning life greater No 223.00
than 20,000 hrs.
4.38.23 Supply of 250W Mercury Vapour lamp with E27 Base, Lumen output greater than 22000 lumen & CRI 45.Avg Burning life greater No 323.00
than 20,000 hrs.
4.38.24 Supply of 400W Mercury Blended lamp with E27 Base, Lumen output greater than 3000 lumen & CRI 52.Avg Burning life greater No 433.00
than 8000 hrs.
4.38.25 Supply of 70W Metal Halide single end tubular Lamp with lumen output of 6400 lumens & CCT 3000/4000 & CRI 80+ & Avg life No 885.00
greater than 15000 to 20,000 Hrs. with Cap Base E27.
4.38.26 Supply of 150W Metal Halide single end tubular Lamp with lumen output of 14500 lumens (150W) & CCT 3000/4000 & CRI 80+ & No 885.00
Avg life greater than 15000 to 20,000 Hrs. with Cap Base E40
4.38.27 Supply of 250W Metal Halide single end tubular Lamp with lumen output of 25000 lumens & CCT 3000 & CRI 80+ & Avg life greater No 998.00
than 24,000 Hrs. with Cap Base E40
4.38.28 Supply of 400W Metal Halide single end tubular Lamp with lumen output of 25000 lumens & CCT 3000 & CRI 80+ & Avg life greater No 1,078.00
than 20,000 Hrs. with Cap Base E40
4.38.29 Supply of 70W Metal Halide Double Ended Lamp with lumen output of 5000 lumens & CCT 3000/4000 & CRI 65+ & Avg life greater No 480.00
9000 Hrs.
4.38.30 Supply of 150W Metal Halide Double Ended Lamp with lumen output of 13000 lumens (> 3000k to 4200K) & CCT 3000/4000 & CRI No 646.00
65+ & Avg life greater 9000 Hrs.
4.38.31 Supply of 70W/150W High Pressure Sodium Vapor tubular Lamp with Xenon filled gas with luminous efficiency of greater than 140 No 885.00
lumen/watt or initial lumens of greater than 6500 lumens & avg rated life greater than 26000 hrs. & minimum starting temperature of
(-) 40 deg C & Hot restrike time <30 Sec with CCT 2000K
4.38.32 Supply of 250W/400W High Pressure Sodium Vapor tubular Lamp with Xenon filled gas with luminous efficiency of greater than 140 No 1,646.00
lumen/watt or initial lumens of greater than 55000 lumens & avg rated life greater than 26000 hrs. & minimum starting temperature of
(-) 40 deg C & Hot restrike time <60 Sec with CCT 2000K
4.38.33 Accessories-Condenser for ceiling fan/MV/SV/MH and other luminaires
4.38.33.1 Upto 4 mfd No 77.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 20 / 67

 4.38.33.2 8 mfd No 102.00
4.38.33.3 10mfd No 123.00
4.38.33.4 15mfd No 164.00
4.38.33.5 20mfd No 225.00
4.38.33.6 32mfd No 336.00
4.38.33.7 33mfd No 361.00
4.38.33.8 42mfd No 377.00
4.38.34 Accessories-Supply of High Intensity Discharge Electro Magnetic ballast suitable for Mercury Vapour Lamp with Class H insulated
copper wire
4.38.34.1 Choke for Mercury Vapour Lamp - 125 Watts No 1,029.00
4.38.34.2 Choke for Mercury Vapour Lamp - 250 Watts No 1,923.00
4.38.34.3 Choke for Mercury Vapour Lamp - 400 Watts No 2,473.00
4.38.35 Accessories- Open Type Heavy Duty Ferromagnetic Copper Ballast for HPSV/HPMH lamps: Supply of High Intensity Discharge
Electro Magnetic Ballast suitable for ...W sodium vapor / Metal Halide lamp with Copper winding of Orthocyclic winding coil. Class H
insulated dual coated copper wire. Compliance to IEC 61347-2-9 Safety & IEC 60923 - Performance. Winding Temperature for HID
Ballast tw = 130 deg C & temperature rise ?T = 70 deg C.
4.38.35.1 For 70 - Watts No 1,243.00
4.38.35.2 For 150 - Watts No 1,717.00
4.38.35.3 For 250 - Watts No 2,266.00
4.38.35.4 For 400 - Watts No 3,524.00
4.38.36 Accessories-Supply of 230 Volts 20/40 watts starter for Fluorescent Lamp No 21.00
4.38.37 Accessories- Supply of 230 Volts 20/40 watts Fluorescent Lamp holder No 14.00
4.38.38 Accessories- Supply of 230 V CFL Lamp Holder 2 pin No 55.00
4.38.39 Accessories- Supply of 230 V CFL Lamp Holder 4 pin No 56.00
4.38.40 Accessories- Supply of 70-150 Watts lamp holder 2 Pin No 96.00
4.38.41 Accessories- Supply of 70-150 Watts lamp holder 4 Pin No 56.00
4.38.42 Accessories- Supply of 230 Volts Porcelain holder for MV/SV/MH Lamp No 96.00
4.38.43 Accessories- Supply of 250-400 Watts lamp Holder No 157.00
4.38.44 Accessories- Supply of 230 Volts CLF lamp Starter Base No 308.00
4.38.45 Accessories- Ignitor Suitable for 70 to 400 Watts SV/MH fittings No 222.00
4.38.46 Accessories- Supply of 28 watts energy saving device (Electronic ballast) with less than 10% THD & PF>0.9 cut off facility, short No 1,002.00
circuit proof suitable for 18W/36W/40W
CHAPTER 5 - POLES & HIGH MAST
5.1 Supply and erection of …...Mtr PCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM

5.1.1 8 Mtr. Each 3,857.00

5.1.2 9Mtr Each 5,228.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 21 / 67

 5.2 Supply and erection of …...Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM

5.2.1 8Mtr 145Kg WL Each 6,047.00

5.2.2 9Mtr 145Kg WL Each 8,029.00
5.3 Supply and erection of 11Mtr Spun Pole including earth work etc,. complete as per the standard technical specification of BESCOM Each 22,957.00

5.4 Supply and fixing of …….cross arm including all Hardware's complete as per the standard technical specification of BESCOM

5.4.1 4 Pin 45x45x5mm -1110mm Each 461.00

5.4.2 2 Pin 45x45x5mm -510mm Each 306.00
5.4.3 Horizontal. 50x450x6mm -980mm Each 562.00
5.5 Supply and erection of Double Pole TC structural set including all hardware's suitable for 100 to 300KVA transformers etc. complete Each 23,100.00
as per the standard technical specification of BESCOM
5.6 Supply and Fixing of Single Pole Mounted Transformer Kit for 25/63/100KVA on 9Mtr RCC Pole etc. complete as per the standard Each 9,870.00
technical specification of BESCOM
5.7 Supply And Fixing of Single Pole Mounted Transformer Kit for 100/250KVA on 11Mtr Spun Pole etc. complete as per the standard Each 31,800.00
technical specification of BESCOM
5.8 Supplying and Fixing ….. including all Hardware's etc. complete as per the standard technical specification of BESCOM
5.8.1 H Frame Set Each 4,560.00
5.8.2 HT ST Support 50x8 mm Each 172.00
5.8.3 LT ST Support 50x6 mm Each 173.00
5.8.4 Spl 3 PIN Cross ARM Each 336.00
5.8.5 RCC Clamp Each 84.00
5.8.6 PCC Clamp Each 84.00
5.8.7 GUY Set Each 1,320.00
5.8.8 GOS Set 200 Amps Single break Each 9,840.00
5.8.9 GOS Set 400 Amps Double break Each 19,800.00
5.8.10 Horn Gap Fuse Unit (H.G.) Each 1,320.00
5.8.11 D.O.L.O cut out Each 5,695.00
5.8.12 Lightning Arrestor 9KV 5kA polymeric type. Each 4,250.00
5.9 Supplying and Fixing …..including all Hardware's etc. complete as per the standard technical specification of BESCOM
5.9.1 1.1 KV Pin Insulator Each 44.00
5.9.3 11 KV Pin Insulator Each 114.00
5.9.4 Disc Insulator 70/90 KN Each 540.00
5.9.5 No. 8 Strain Insulator Each 14.00
5.9.6 No.15 Strain Insulator. Each 36.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 22 / 67

 5.10 Supplying and Fixing of P.G.Clamp including all Hardware's etc. complete as per the standard technical specification of BESCOM. Each 101.00

5.11 Supplying and stringing of ACSR Conductor (6/2.59mm Al +1/2.59mm Steel). Mtr 30.00
5.12 Supplying and Fixing of Rabbit Conductor(6/3.15mm Al +6/3.15mm Steel). Mtr 47.00
5.13.1 Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing two coats of red oxide
paint and finished with two coats of enameled paint of approved quality and colour and M.S. base plate of suitable size welded at the
bottom of the pole(as per IS) and 40mm dia GI / flexible PVC pipe of 1 mtr length fitted to the heavy gauge polycarbonate control box
including 5way connector of size 167x125x82mm for 7.5M pole/200x160x98mm for remaining length of pole with front opening cover,
with locking arrangements and suitable capacity MCB / DP switch, The pole shall be erected in cement concrete work (1:2:4)
including excavation and refilling of planting depth of the pole to the ground level and the coping CC shall be up to 0.6M above
ground level as per IS 2713 - 7. Erection of heavy duty pole on Footpath / median

5.13.1.1 9Mt (5Mt Hb,165.1mm dia 4.85mm thick x2M Hm, 139.7mm dia 4.50mm thick x 2M Ht,114.3mm dia 3.65mm thick) as per IS 410 SP Each 15,000.00
32
5.13.1.2 10Mt (5Mt Hb,165.1mm dia 4.85mm thick x3M Hm, 139.7mm dia 4.50mm thick x 2M Ht,114.3mm dia 3.65mm thick) as per IS 410 SP Each 19,000.00
47
5.14 Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate
for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS
specifications suitable to withstand the wind speed of 47 m/sec for …….Mtrs pole in single section and single joint welded as per IS
9595/IS 10178AWS having dimensions bottom …..mm, top….mm with 3mm thick, suitable base plate and 4Nos of ..... long J bolts
along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153
etc., (excluding foundation) as per drawing appended.
5.14.1 3 meters - Top 70mm and bottom 130mm dia Each 6,091.00
5.14.2 4 meters - Top 70mm and bottom 130mm dia Each 7,398.00
5.14.3 5meters - Top 70mm and bottom 130mm dia Each 8,694.00
5.14.4 6meters - Top 70mm and bottom 130mm dia Each 10,314.00
5.14.5 7 meters - Top 70mm and bottom 130mm dia Each 12,420.00
5.14.6 8 meters - Top 70mm and bottom 135mm dia Each 13,932.00
5.14.7 9 meters - Top 70mm and bottom 155mm dia Each 17,118.00
5.14.8 10 meters - Top 70mm and bottom 175mm dia Each 17,856.00
5.14.9 11meters - Top 90mm and bottom 210mm dia Each 23,520.00
5.14.10 12meters - Top 90mm and bottom 240mm dia Each 27,648.00

5.15 Supply and erection of 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height cast iron Each 16,000.00
decorative round pedestal as per design weighing not less than 37Kgs, the pedestal shall be fitted with Class 'C' G.I.Pipe 7 Feet
height 75mm outer dia and 4 feet height top piece outer dia of 65mm fixed by measure of threading/ welding / coupling complete.
(excluding foundation).

BANGALORE CIRCLE ELECTRICAL SR 2014-15 23 / 67

 5.16 Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for
shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS
specifications suitable to withstand the wind speed of 47 m/sec for …….Mtrs pole in single section and single joint welded as per IS
9595/IS 10178AWS having dimensions bottom …..mm, top….mm with 3mm thick, suitable base plate and 4Nos of ..... long J bolts
along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153
etc.,(excluding foundation) as per drawing appended.
15.16.1 3 meters - Top 75mm and bottom 105 mm dia Each 5,724.00
5.16.2 4 meters - Top 75mm and bottom 115 mm dia Each 7,236.00
5.16.3 5meters - Top 75mm and bottom 125 mm dia Each 9,450.00
5.16.4 6meters - Top 75mm and bottom 135 mm dia Each 11,718.00
5.16.5 7 meters - Top 75mm and bottom 145 mm dia Each 14,040.00
5.16.6 8 meters - Top 75mm and bottom 155 mm dia Each 16,524.00
5.16.7 9 meters - Top 75mm and bottom 165 mm dia Each 19,980.00
5.17 Fabrication, Supplying, Erection, Testing and Commissioning of ……Mtrs long polygon high mast with Single / Multiple  telescopic
sections having, ( minimum overlap distance of 1.5 times of top section)  thickness as per BSEN 10025 grade S 355 JO /ASTM A572-
50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/sec as per IS 875 part 3(as per GA Drawing).Base plate  as
per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70
microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint. The mast shall have 2way head frame with  die cast LM-6
pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5mm dia, stainless steel
wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5sqmm EPR insulated PCP sheathed trailing power cable
housed inside the bottom shaft of mast with door having  locking arrangement. The mast shall have power tool operating on 230/
415V, 50Hz, 1/3 phases reversible geared motor. The mast shall have lantern of 2 segments, suitable dia  with max load  carrying
capacity as per IS 1239. The mast shall be erected on existing  RCC footing.  The mast shall be supplied with 3mm thick template,
lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin
lamps fitting with wiring complete. ( excluding foundation) as per technical data.

5.17.1 12Mtrs/12.5Mtrs - Top 100mm and bottom 310 mm dia Each 120,000.00
5.17.2 16Mtrs - Top 150mm and bottom 410 mm dia Each 160,000.00
5.17.3 20Mtrs - Top 150mm and bottom 460 mm dia Each 205,000.00
5.17.4 25Mtrs - Top 200mm and bottom 540 mm dia Each 249,000.00
5.17.5 30Mtrs - Top 150mm and bottom 610 mm dia Each 315,000.00
5.18 Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using
necessary bolts, nuts etc., complete.
5.18.1 Single Arm Bracket with 1000mm Standard 40/50MM dia Each 1,919.00
5.18.2 Single Arm Bracket with 1500mm Standard 40/50MM dia Each 2,400.00
5.18.3 Single Arm Bracket with 2000mm Standard 40/50MM dia Each 2,760.00
5.18.4 Double Arm Bracket with 1000mm Standard 40/50MM dia Each 2,640.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 24 / 67

 5.18.5 Double Arm Bracket with 1500mm Standard 40/50MM dia Each 3,540.00
5.18.6 Double Arm Bracket with 2000mm Standard 40/50MM dia Each 4,200.00
CHAPTER 6 - CONTROL SWITCH GEARS & ACCESSORIES
6.1 Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and Each 1,427.00
moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the
same to suitable capacity wires for 400/440 volts 3 phase motor/single phase motor upto 5 HP.
6.2 Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer
mounted on a common base plate held in steel enclosure for use on 400/440 volts 3 phase and wired after fixing to the existing
wooden board for motor.
6.2.1 Upto 12.5 HP Each 6,583.00
6.2.2 Above 15 HP upto 25 HP Each 8,273.00
6.2.3 Above 25 HP upto 35 HP Each 14,123.00
6.3 Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20 HP Each 768.00
capacities.
6.4 Fixing a shunt capacitor of … KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including
banking of more than one capacitor.
6.4.1 Up to 5 KVAR Each 138.00
6.4.2 6 to 10 KVAR Each 198.00
6.4.3 11 to 20 KVAR Each 318.00
6.5 Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.

6.5.1 32Amps Each 1,868.00

6.5.2 63Amps Each 3,600.00
6.5.3 100Amps Each 6,480.00
6.6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the
same to the wall using tapered inverted wooden plugs screws.
6.6.1 8"x6"x1.5" Each 72.00
6.6.2 10"x8"x1.5" Each 92.00
6.6.3 12"x9"x1.5" Each 96.00
6.6.4 12"x12"x2" Each 153.00
6.6.5 15"x12"x2" Each 177.00
6.6.6 20"x20"x2.5" Each 302.00
6.7 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

6.7.1 16Amps Each 120.00

6.7.2 32Amps Each 180.00
6.7.3 63Amps Each 234.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 25 / 67

 6.7.4 100Amps Each 360.00
6.7.5 200Amps Each 732.00
6.7.6 320Amps Each 1,440.00
6.8 Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947.

6.8.1 63Amps Each 3,543.00

6.8.2 125Amps Each 5,060.00
6.8.3 200Amps Each 6,262.00
6.8.4 250Amps Each 7,772.00
6.8.5 400Amps Each 12,426.00
6.9 Supplying and fixing HRC fuse units base on existing switch/panel board.
6.9.1 up to 32Amps Each 174.00
6.9.2 63A to 125Amps Each 296.00
6.9.3 250Amps Each 594.00
6.9.4 400-600Amps Each 1,160.00
6.10.1 Up to 63Amps Each 232.00
6.10.2 100Amps Each 307.00
6.10.3 125Amps Each 358.00
6.10.4 200Amps Each 552.00
6.10.5 250Amps-800 Amps Each 1,436.00
6.11 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply.
6.11.1 Up to 63Amps Each 4,892.00
6.11.2 100-125Amps Each 6,426.00
6.11.3 200Amps Each 12,614.00
6.11.4 250Amps Each 18,688.00
6.11.5 400Amps Each 29,143.00
6.11.6 630Amps Each 34,456.00
6.11.7 800Amps Each 50,328.00
6.12 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers
and wiring etc., complete with AC-3 Rating and as per IS-13947.
6.12.1 25Amps Each 1,303.00
6.12.2 40Amps Each 2,095.00
6.12.3 60-70Amps Each 4,774.00
6.12.4 100-125Amps Each 9,915.00
6.12.5 160-200Amps Each 15,974.00
6.12.6 225-250Amps Each 17,801.00
6.12.7 315-360Amps Each 30,766.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 26 / 67

 6.12.8 400Amps Each 37,568.00
6.12.9 500-550Amps Each 45,565.00
6.12.10 700-800Amps Each 65,160.00
6.13.A Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts
and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per
IS-13947. ( Icu = Ics) THREE POLE
6.13.A.1 100Amps 25kA. Each 4,044.00
6.13.A.2 125-160Amps 25kA. Each 5,406.00
6.13.A.3 200Amps 35kA. Each 9,877.00
6.13.A.4 250Amps 35kA. Each 13,390.00
6.13.A.5 400Amps 50kA. Each 21,310.00
6.13.B Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts
and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per
IS-13947. ( Icu = Ics) FOUR POLE
6.13.B.6 100Amps 25kA. Each 5,809.00
6.13.B.7 125-160Amps 25kA. Each 7,372.00
6.13.B.8 200Amps 35kA. Each 14,592.00
6.13.B.9 250Amps 35kA. Each 16,327.00
6.13.B.10 320-400Amps 50kA. Each 24,511.00
6.13.B.11 630Amps 50kA. Each 30,040.00
6.13.B.12 700-800Amps 50kA. Each 41,609.00
6.14 Supplying and fixing of Shunt trip suitable for MCCB.CBCT. Each 1,486.00
6.15 Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required
clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with
necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for
fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828.

6.15.1 4Way Each 7,243.00

6.15.2 8Way Each 9,095.00
6.15.3 12Way Each 11,854.00
6.16 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to
IEC 60898.
6.16.1 5-32Amps SP Each 418.00
6.16.2 40-63 Amps SP Each 677.00
6.16.3 5-32 Amps DP Each 849.00
6.16.4 40-63Amps DP Each 1,093.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 27 / 67

 6.16.5 5-32Amps TPN Each 1,547.00
6.16.6 40-63Amps TPN Each 1,936.00
6.17.I Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc.,
with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14
SWG MS enclosure.I - Single Door
6.17.I.1 4Way SP &N Each 706.00
6.17.I.2 8Way SP &N Each 866.00
6.17.I.3 12Way SP &N Each 1,047.00
6.17.II Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc.,
with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14
SWG MS enclosure.II - Double Door
6.17.II.4 4Way SP &N Each 1,067.00
6.17.II.5 8Way SP &N Each 1,299.00
6.17.II.6 12Way SP &N Each 1,622.00
6.17.III Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc.,
with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14
SWG MS enclosure.III - Double Door
6.17.III.7 4Way TP &N Each 2,399.00
6.17.III.8 6Way TP &N Each 2,867.00
6.17.III.9 8Way TP &N Each 3,585.00
6.17.III.10 12Way TP &N Each 5,138.00
6.18 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing
wood/panel board.
6.18.1 16-25 Amps 2 pole Each 2,412.00
6.18.2 32-40 Amps 2 pole Each 2,623.00
6.18.3 32-40 Amps 4 pole Each 2,936.00
6.18.4 63 Amps 4 pole Each 3,350.00
6.19 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest Each 7,998.00
microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount
on DIN rail / flush mounting on panel board.
6.20 Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board. Each 390.00
6.21 earthing Each 594.00
6.22 Supplying, fixing and wiring 0 to 30amps Direct Reading AC analog type Ammeter Each 400.00
6.23 Supplying, fixing and wiring 0 to 100amps Direct Reading AC analog type Ammeter Each 452.00
6.24 Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter without CT Each 415.00
6.25 Supplying, fixing and wiring rotary selector switch suitable for Ammeter. Each 172.00
6.26 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. Each 140.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 28 / 67

 6.27 Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. Each 1,224.00
6.28 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter. Each 1,188.00
6.29 Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 Each 3,778.00
accuracy as per IS 14697 and completely wired.
6.30 Supplying and fixing digital frequency meter with latest micro controller technology, ultra bright 4 digit LED display, from 30-500V AC Each 840.00
and optional or relay output for high/low frequency and wiring complete.
6.31 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power Each 8,003.00
factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required
with communication Port and Class 0.5s accuracy.
6.32 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. Each 483.00
6.33 Supplying, fixing and wiring electronic 10 to 40 Amps three phase 4 wire class-1 Accuracy Energy Meter. Each 4,900.00
6.34 Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer. Each 720.00
6.35 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor KVAR 414.00
improvement of rotating machinery.
6.36 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. Each 442.00

6.37 Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, Each 18,660.00
relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each
individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive
displays with large, three place LED display, Long term memory for settings, protection for over voltage, power factor correction fault
and no voltage, to connect / disconnect banks, with automatic recognition or with standard programs.

6.38 Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat
shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat
frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS
specification with necessary bolts, nuts and washers etc., complete.
6.38.1 100Amps 4x30x6mm Aluminum Strips Mtr 2,135.00
6.38.2 250Amps 4x30x10mm Aluminum Strips Mtr 2,942.00
6.38.3 400Amps 4x50x10mm Aluminum Strips Mtr 3,823.00
6.38.4 600Amps 4x75x10mm Aluminum Strips Mtr 4,834.00
6.38.5 1000Amps double run of 60x10mm per phase and single run of 60x10mm for neutral Mtr 9,088.00
6.39 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted
with 2 coats of red oxide and then two coats of approved paint.
6.39.1 40x40x6mm Mtr 263.00
6.39.2 50x50x6mm Mtr 338.00
6.39.3 75x75x6mm Mtr 475.00
6.39.4 50x100x50x6mm C channel Mtr 648.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 29 / 67

 6.39.5 75x150x75x6mm C channel Mtr 791.00
6.40 Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for
better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps
with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with
approved colour enameled metal paint etc., complete.
6.40.1 14SWG sq.cms 0.37
6.40.2 16SWG sq.cms 0.33
6.40.3 18SWG sq.cms 0.28
6.41 Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph / 1
Ph connections with Loop-In & Loop-Out terminals for 10 Sqmm / 25 Sqmm 3.5 C Al/Ar / Cu/Ar Cable and branch out 2.5 Sqmm 2
core Al/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe,
IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through
IP65 Thermoplastic, polyamide glands and/or grommets.
6.41.1 200mmx200mmx98mm Each 2,178.00
6.41.2 260mmx210mmx116mm Each 2,334.00
6.42 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate
Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both
lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB
cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.

6.42.1 300mmx300mmx214mm Each 4,266.00

6.42.2 300mmx450mmx214mm Each 5,826.00
6.42.3 300mmx600mmx170mm Each 6,492.00
6.42.4 600mmx600mmx170mm Each 13,728.00
6.43.A Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The
entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. SP & N

6.43.A.1 10Amps Each 894.00

6.43.A.2 20Amps Each 918.00
6.43.B Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The
entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. TP & N

6.43.B.3 20Amps Each 1,170.00

6.43.B.4 30Amps Each 1,614.00
6.44.A Supplying and fixing of MODULAR MCB Devices( Tripper) With Breaking capacity of 6KA.. SP
6.44.A.1 16-32Amps Each 200.00
6.44.A.2 40Amps Each 284.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 30 / 67

 6.44.A.3 63 Amps Each 356.00
6.44.B Supplying and fixing of MODULAR MCB Devices( Tripper) With Breaking capacity of 6KA.. TP
6.44.B.4 16-32Amps Each 759.00
6.44.B.5 40Amps Each 1,023.00
6.44.B.6 63 Amps Each 1,130.00
6.45 Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers Each 2,186.00
etc.,.) 3-120sec setting.
6.46 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Each 4,586.00
6.47 Supplying and fixing of solar lux level street light control switch single phase including suitable capacity contactor Each 9,580.00
6.47.1 3 KW Each 9,580.00
6.47.2 5 KW Each 10,000.00
6.47.3 8 KW Each 11,467.00
6.48 Supplying and fixing of solar lux level street light control switch three phase including suitable capacity contactor
6.48.1 5 KW Each 11,467.00
6.48.2 8 KW Each 12,400.00
6.48.3 12 KW Each 15,730.00
CHAPTER 7 - L.T. U.G. CABLES
7.1 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm No 2,727.00
dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-
round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per
ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122
mm dia
7.2 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long No 4,317.00
GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a
CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the
electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The
connection from the electrode is to be established through GI strip using GI bolts and nuts.

7.3.A Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip

7.3.A.1 25x3mm Mtr 77.00

7.3.A.2 25x6mm Mtr 118.00
7.3.A.3 40x6mm Mtr 166.00
7.3.A.4 50x6mm Mtr 202.00
7.3.A.5 600x600x3mm GI Plate Each 784.00
7.3.B Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper
strip

BANGALORE CIRCLE ELECTRICAL SR 2014-15 31 / 67

 7.3.B.6 25x3mm Mtr 523.00
7.3.B.7 25x6mm Mtr 1,018.00
7.3.B.8 40x6mm Mtr 1,480.00
7.3.B.9 50x6mm Mtr 2,008.00
7.3.B.10 600x600x3mm plate Each 7,148.00
7.4 Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except
2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured
cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.
7.4.1 2 core 10 sqmm Mtr 87.60
7.4.2 4 core 10 sqmm Mtr 118.80
7.4.3 2 core 16 sqmm Mtr 108.00
7.4.4 4 core 16 sqmm Mtr 140.40
7.4.5 3.5 core 25 sqmm Mtr 165.60
7.4.6 3.5 core 35 sqmm Mtr 204.00
7.4.7 3.5 core 50 sqmm Mtr 265.00
7.4.8 3.5 core 70 sqmm Mtr 270.00
7.4.9 3.5 core 95 sqmm Mtr 445.20
7.4.10 3.5 core 120 sqmm Mtr 556.80
7.4.11 3.5 core 150 sqmm Mtr 657.60
7.4.12 3.5 core 185 sqmm Mtr 816.00
7.4.13 3.5 core 240 sqmm Mtr 1,030.80
7.4.14 3.5 core 300 sqmm Mtr 1,255.20
7.4.15 3.5 core 400 sqmm Mtr 1,608.00
7.5 Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strips
(except 2CX10Sq.mm wire armoured) as per IS-3975:1990 & extruded PVC outer sheathed armoured cable as per IS-1554 Part-
1:1988 & confirming to GTP of GROUP-B
7.5.1 2 core 10 sqmm Mtr 73.00
7.5.2 4 core 10 sqmm Mtr 99.00
7.5.3 2 core 16 sqmm Mtr 90.00
7.5.4 4 core 16 sqmm Mtr 117.00
7.5.5 3.5 core 25 sqmm Mtr 138.00
7.5.6 3.5 core 35 sqmm Mtr 170.00
7.5.7 3.5 core 50 sqmm Mtr 220.00
7.5.8 3.5 core 70 sqmm Mtr 225.00
7.5.9 3.5 core 95 sqmm Mtr 371.00
7.5.10 3.5 core 120 sqmm Mtr 464.00
7.5.11 3.5 core 150 sqmm Mtr 548.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 32 / 67

 7.5.12 3.5 core 185 sqmm Mtr 680.00
7.5.13 3.5 core 240 sqmm Mtr 859.00
7.5.14 3.5 core 300 sqmm Mtr 1,045.00
7.5.15 3.5 core 400 sqmm Mtr 1,340.00
7.6 Supplying of 1.1KV grade Aerial Bunched Cable Stranded & Compacted Aluminum Phase Conductor, and Stranded Messenger
Conductor with all aluminum Alloy, Phase Conductor is insulated with XLPE Compound, insulated Messenger with specified IS-
14255:1995 & confirming to GTP of GROUP-A.
7.6.1 2 X 16 + 1 X 25 SQ.MM Mtr 92.00
7.6.2 3 X 16 + 1 X 25 SQ.MM Mtr 115.00
7.6.3 3 X 16 + 1 X 25 + 1 X 16 SQ.MM Mtr 117.00
7.6.4 2 X 25 + 1 X 25 SQ.MM Mtr 143.00
7.6.5 3 X 25 + 1 X 25 + 1 X 16 SQ.MM Mtr 177.00
7.6.6 3 X 70 + 1 X 50 + 1 X 16 SQ.MM Mtr 402.00
7.6.7 3 X 95 + 1 X 70 + 1 X 16 SQ.MM Mtr 525.00
7.6.8 3 X 95 + 1 X 70 + 1 X 25 SQ.MM Mtr 537.00
7.6.9 3 X 95 + 1 X 70 + 1 X 35SQ.MM Mtr 549.00
7.7 Supplying of 1.1KV grade Stranded & Compacted Aluminum Phase Conductor and Stranded Messenger Conductor with all aluminum
Alloy. Phase Conductor is insulated with XLPE Compound, Bare Messenger as per IS-14255:1995 & confirming to GTP of GROUP-
B.
7.7.1 2 X 16 + 1 X 25 SQ.MM Mtr 76.00
7.7.2 3 X 16 + 1 X 25 SQ.MM Mtr 95.00
7.7.3 3 X 16 + 1 X 25 + 1 X 16 SQ.MM Mtr 97.00
7.7.4 2 X 25 + 1 X 25 SQ.MM Mtr 119.00
7.7.5 3 X 25 + 1 X 25 + 1 X 16 SQ.MM Mtr 147.00
7.7.6 3 X 70 + 1 X 50 + 1 X 16 SQ.MM Mtr 335.00
7.7.7 3 X 95 + 1 X 70 + 1 X 16 SQ.MM Mtr 437.00
7.7.8 3 X 95 + 1 X 70 + 1 X 25 SQ.MM Mtr 447.00
7.7.9 3 X 95 + 1 X 70 + 1 X 35SQ.MM Mtr 457.00
7.8.A Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In
existing trench/duct.
7.8.A.1 6 sqmm to 16 sqmm Mtr 10.80
7.8.A.2 25 sqmm to 75 sqmm Mtr 16.20
7.8.A.3 95 sqmm to150Sqmm Mtr 21.60
7.8.A.4 185sqmm to 240Sqmm Mtr 27.00
7.8.A.5 300sqmm to 400Sqmm Mtr 32.40
7.8.B Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.On
wall /Structure

BANGALORE CIRCLE ELECTRICAL SR 2014-15 33 / 67

 7.8.B.6 6 sqmm to 16 sqmm Mtr 31.00
7.8.B.7 25 sqmm to 75 sqmm Mtr 34.80
7.8.B.8 95 sqmm to 150Sqmm Mtr 42.40
7.8.B.9 185sqmm to 240Sqmm Mtr 44.50
7.8.B.10 300sqmm to 400Sqmm Mtr 59.50
7.9 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As
per Civil SR KSRB I-2, P-7)
7.9.1 In soil (ordinary) Mtr 78.00
7.9.2 In soil (hard) Mtr 106.00
7.9.3 Cutting road surface Mtr 85.00
7.9.4 Asphalt cutting Mtr 117.00
7.9.5 C.C. cutting Mtr 212.00
7.10 Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable. Mtr 103.00
7.11 Providing and laying in position 100mm dia stone ware pipe in existing trench. Mtr 223.00
7.12 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with
necessary clamping arrangements for UG cable of 1.1 KV.
7.12.1 40mm Mtr 345.00
7.12.2 50mm Mtr 391.00
7.12.3 65mm Mtr 585.00
7.12.4 80mm Mtr 710.00
7.12.5 100mm Mtr 920.00
7.13 Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound
complete with terminals, clamps, bolts, nuts and washers etc.
7.13.1 10Sqmm Each 268.00
7.13.2 16Sqmm Each 280.00
7.13.3 25Sqmm Each 362.00
7.13.4 35Sqmm Each 362.00
7.13.5 50Sqmm Each 637.00
7.13.6 70Sqmm Each 643.00
7.13.7 95Sqmm Each 870.00
7.13.8 120Sqmm Each 1,147.00
7.13.9 185Sqmm Each 1,277.00
7.13.10 225-300Sqmm Each 1,849.00
7.14 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
7.14.1 19/20mm Each 70.00
7.14.2 25mm dia Each 86.00
7.14.3 32mm dia Each 122.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 34 / 67

 7.14.4 45mm dia Each 200.00
7.14.5 50mm dia Each 264.00
7.14.6 63mm dia Each 400.00
7.14.7 75mm dia Each 513.00
7.14.8 100mm dia Each 998.00
7.15 Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated
and PVC sheathed steel tape, wire armoured aluminum conductor cable of 1.1 KV grade of the following sizes.
7.15.1 upto 6Sqmm Per Kit 1,294.00
7.15.2 10/16Sqmm Per Kit 1,327.00
7.15.3 3 ½ x35 sqmm Per Kit 1,604.00
7.15.4 3 ½ x50 sqmm Per Kit 1,844.00
7.15.5 3 ½ x70/95 sqmm Per Kit 1,844.00
7.15.6 3 ½ x120 /150 sqmm Per Kit 2,050.00
7.15.7 3 ½ x185/225 sqmm Per Kit 2,050.00
7.15.8 3 ½ x240 sqmm Per Kit 2,600.00
7.15.9 3 ½ x300 sqmm Per Kit 2,600.00
7.15.10 3 ½ x400 sqmm Per Kit 3,013.00
7.16 Supplying Bitumen Compound and covering the cable joint/ pot heads Per Kg 85.00
7.17 Supplying Epoxy Resin and covering the cable joint. Per Kg 900.00
7.18 Supply and wrapping the conductor with camabrick tape roll. Per roll 123.00
7.19 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI
bolts/nuts and washer or welding as required.
7.19.1 150x50mm Mtr 440.00
7.19.2 300x50mm Mtr 547.00
7.19.3 450x50mm Mtr 844.00
7.19.4 600x50mm Mtr 893.00
7.19.5 750x50mm Mtr 1,145.00
7.20 Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting
Sockets/Couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part -II suitable for drawing
underground cables.
7.20.1 40mm OD / 32mm ID Mtr 98.00
7.20.2 50mm OD / 38mm ID Mtr 151.00
7.20.3 63mm OD / 50mm ID Mtr 206.00
7.20.4 77mm OD / 63mm ID Mtr 261.00
7.20.5 90mm OD / 76mm ID Mtr 331.00
7.20.6 110mm OD / 94mm ID Mtr 368.00
7.20.7 120mm OD / 103mm ID Mtr 420.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 35 / 67

 7.20.8 125mm OD / 105mm ID Mtr 472.00
7.20.9 145mm OD / 123mm ID Mtr 537.00
7.20.10 160mm OD / 135mm ID Mtr 580.00
7.20.11 175mm OD / 147mm ID Mtr 646.00
7.20.12 180mm OD / 153mm ID Mtr 673.00
7.20.13 200mm OD / 174mm ID Mtr 729.00
7.21 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.
7.21.1 1.5 sqmm Each 2.00
7.21.2 2.5 sqmm Each 3.12
7.21.3 4 sqmm Each 6.25
7.21.4 6 sqmm Each 6.25
7.21.5 10 sqmm Each 7.65
7.21.6 16 sqmm Each 11.31
7.21.7 25 sqmm Long Barrel Each 20.59
7.21.8 35 sqmm Long Barrel Each 35.72
7.21.9 50 sqmm Long Barrel Each 62.40
7.21.10 70 sqmm Long Barrel Each 98.28
7.21.11 95 sqmm Long Barrel Each 149.76
7.21.12 120 sqmm Long Barrel Each 196.56
7.21.13 150 sqmm Long Barrel Each 241.80
7.21.14 185 sqmm Long Barrel Each 338.52
7.21.15 240 sqmm Long Barrel Each 478.92
7.21.16 300 sqmm Long Barrel Each 647.40
7.21.17 400 sqmm Long Barrel Each 978.12
7.22.A Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary
suitable size clamps, nails, guttas/spacers etc. GI Wire
7.22.A.1 12 SWG Mtr 13.50
7.22.A.2 10 SWG Mtr 14.70
7.22.A.3 8 SWG Mtr 19.50
7.22.B Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary
suitable size clamps, nails, guttas/spacers etc. Copper wire.
7.22.B.4 12 SWG Mtr 59.70
7.22.B.5 10 SWG Mtr 69.30
7.22.B.6 8 SWG Mtr 107.70
7.23 Chemical earthing for grounding. Conduits, IC cutouts & other equipments backfill compound which is non-corrosive, thermally
conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achiveing
ohmic value less than one ohm

BANGALORE CIRCLE ELECTRICAL SR 2014-15 36 / 67

 7.23.1 Using 4ft. Copper bonded rod with backfill compound 1 kit 4,000.00
7.23.2 Using 6ft. Copper bonded rod with backfill compound 1 kit 5,500.00
7.23.3 Using 10ft. Copper bonded rod with backfill compound 1 kit 7,500.00
7.23.4 Using 4ft. SS rod with backfill compound 1 kit 2,500.00
7.23.5 Using 6ft. SS rod with backfill compound 1 kit 4,000.00
7.23.6 Using 10ft. SS rod with backfill compound 1 kit 5,500.00
CHAPTER 8 - H.T CABLES & JOINTS
8.1.A Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control
tube having High Permittivity XLPE Terminations - STRAIGHT THROUGH JOINTING KIT & confirming to the GTP.3x95/120Sqmm

8.1.A.1 Group A kit 18,961.00

8.1.A.2 Group B kit 15,800.00
8.1.B Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control
tube having High Permittivity XLPE Terminations - STRAIGHT THROUGH JOINTING KIT & confirming to the GTP.3cx150/185Sqmm

8.1.B.3 Group A kit 19,750.00

8.1.B.4 Group B kit 16,458.00
8.1.C Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control
tube having High Permittivity XLPE Terminations - STRAIGHT THROUGH JOINTING KIT & confirming to the GTP.
3cx240/300Sqmm
8.1.C.5 Group A kit 20,541.00
8.1.C.6 Group B kit 17,117.00
8.1.D.7 Group A kit 21,330.00
8.1.D.8 Group B kit 17,775.00
8.2.A Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress
Control tube having High Permittivity XLPE Terminations- INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP.
OUTDOOR
8.2.A.1 3Cx95/120sqmm kit 10,108.00
8.2.A.2 3Cx150/185sqmm kit 10,520.00
8.2.A.3 3Cx240/300sqmm kit 10,930.00
8.2.A.4 3Cx400sqmm kit 11,260.00
8.2.B Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress
Control tube having High Permittivity XLPE Terminations- INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. INDOOR

8.2.B.5 3Cx95/120sqmm kit 8,373.00

8.2.B.6 3Cx150/185sqmm kit 8,801.00
8.2.B.7 3Cx240/300sqmm kit 9,218.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 37 / 67

 8.2.B.8 3Cx400sqmm kit 9,638.00
8.3 HT Cable GROUP A: Supplying and laying of high tension 11KV cable, Dry Curing & Dry Cooling with true triple extrusion,
simultaneously through a single common head, 3 core under ground XLPE (E) cable having stranded compact circular aluminium
conductor, screened insulated, insulation screened with extruded semiconducting compound in combination with copper tape, core
laid up extruded inner sheathed of GI flat strip armoured and overall PVC sheathed with specified IS 7098/11/85 with latest
amendments & confirming to the GTP of GROUP-A
8.3.1 3Cx95sqmm Mtr 1,040.00
8.3.2 3Cx120sqmm Mtr 1,192.00
8.3.3 3Cx150sqmm Mtr 1,200.00
8.3.4 3Cx185sqmm Mtr 1,380.00
8.3.5 3Cx240sqmm Mtr 1,645.00
8.3.6 3Cx400sqmm Mtr 2,290.00
8.4 HT Cable GROUP B : Supplying and laying of high tension 11KV cable, Dry Curing & Dry Cooling with true triple extrusion,3 core
under ground XLPE (E) cable having stranded compact circular aluminum conductor, screened insulated, insulation screened with
extruded semiconducting compound in combination with copper tape, core laid up inner sheathed of PVC tape GI flat strip armoured
and overall PVC sheathed as per IS 7098/11/85 with latest amendments & confirming to the GTP of GROUP-B

8.4.1 3Cx95sqmm Mtr 860.00

8.4.2 3Cx120sqmm Mtr 986.00
8.4.3 3Cx150sqmm Mtr 1,076.00
8.4.4 3Cx185sqmm Mtr 1,240.00
8.4.5 3Cx240sqmm Mtr 1,480.00
8.4.6 3Cx400sqmm Mtr 2,060.00
8.5 Supplying & Making of Stranded Compacted Circular Aluminum conductor, conductor screened with extruded semi conducting
compound, XLPE insulated, insulation screened with extruded semi conducting compound followed by copper tape, each core
sheathed with PVC Type ST-2 compound, 3 phase cores twisted around XLPE insulated Aluminum alloy messenger wire to form
6.35/11KV grade AERIAL BUNCHED CABLE with specified IS 7098/II/85 & confirming to the GTP of GROUP-A

8.5.1 3 X 95 + 1 X 70 Mtr 624.00

8.5.2 3 X 120 + 1 X 95 Mtr 788.00
8.6 Supplying & Making of Stranded Compacted Circular Aluminum conductor, conductor screened with extruded semi conducting
compound, XLPE insulated, insulation screened with extruded semi conducting compound followed by copper tape, each core
sheathed with PVC Type ST-2 compound, 3 phase cores twisted around XLPE insulated Aluminum alloy messenger wire to form
6.35/11KV grade AERIAL BUNCHED CABLE as per IS 7098/II/85 & confirming to the GTP of GROUP-B

8.6.1 3 X 95 + 1 X 70 Mtr 513.00

8.6.2 3 X 120 + 1 X 95 Mtr 650.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 38 / 67

 8.7 Supplying, erecting, testing and commissioning of ..... KVA aluminum wound Distribution Transformer 11KV/433V with Off Load Tap
Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, marshalling box with wiring, oil level indicator with
+5% to-10% Steps of 2.5%, HT and LT bushings with all standard accessories as per latest IS standard technical specification.

8.7.1 25 KVA Each 86,950.00

8.7.2 63 KVA Each 132,386.00
8.7.3 100 KVA Each 163,200.00
8.7.4 200 KVA Each 262,925.00
8.7.5 250 KVA Each 291,100.00
8.7.6 315KVA Each 395,000.00
8.7.7 500KVA Each 492,200.00
8.8 Supplying, erection, Testing and Commissioning of …..KVA Aluminum Wound Distribution Transformer tap switch, Butchholtz relay
winding Temperature indicator, oil temperature indicator, marshalling box with wiring, magnetic oil level indicator with +5% to -10%
steps of 2.5% with HT and LT cable end boxes including all standard accessories as per latest IS Standard Technical Specification.

8.8.1 25 KVA Each 96,950.00

8.8.2 63 KVA Each 142,380.00
8.8.3 100 KVA Each 173,170.00
8.8.4 200 KVA Each 272,925.00
8.8.5 250 KVA Each 301,110.00
8.8.6 315KVA Each 405,040.00
8.8.7 500KVA Each 502,200.00
8.9 Supplying, erecting, testing and commissioning of ..... KVA capacity Copper wound Distribution Transformer 11KV/433V with Off Load
Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, marshalling box with wiring, oil level indicator
with +5% to-10% Steps of 2.5%, HT and LT bushings with all standard accessories as per latest IS standard technical specification.

8.9.1 63 KVA Each 277,700.00

8.9.2 100 KVA Each 318,700.00
8.9.3 200 KVA Each 449,680.00
8.9.4 250 KVA Each 480,850.00
8.9.5 315KVA Each 580,000.00
8.9.6 500KVA Each 781,000.00
8.10 Supplying, erecting, testing and commissioning of ..... KVA capacity Copper wound Distribution Transformer 11KV/433V with Off Load
Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, marshalling box with wiring, magnetic oil level
indicator with +5% to-10% Steps of 2.5% with HT and LT cable end boxes including all standard accessories as per latest IS standard
technical specification.
8.10.1 63 KVA Each 287,730.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 39 / 67

 8.10.2 100 KVA Each 328,700.00
8.10.3 200 KVA Each 459,680.00
8.10.4 250 KVA Each 490,850.00
8.10.5 315VA Each 590,030.00
8.10.6 500KVA Each 791,000.00
8.11 Supplying erection, testing and commissioning of 11kV Load Break Switch with connected accessories and hardware's etc. suitable Each 99,250.00
for outdoor type complete as per latest IS standard technical specification. LBS should be approved by BESCOM

8.12 Supplying erection, testing and commissioning of 11kV Load Break Switch with 4 wire- ( with Neutral) Metering cubicle and connected Each 319,987.00
accessories, hardware's etc. suitable for outdoor type complete as per latest IS standard technical specification. LBS should be
approved by BESCOM
8.13 Supplying erection, testing and commissioning of 3way 11kV Load Break Switch with connected accessories and hardware's etc. Each 266,806.00
suitable for outdoor type complete as per latest IS standard technical specification. LBS should be approved by BESCOM

8.14 Supplying and fixing of Spiral Earth Electrodes as per standard technical specification as per BESCOM. Each 544.00
8.15 Supplying and fixing of Alkathine Tube Of 25mm dia as per standard technical specification. Mtrs 414.00
8.16 LT Distribution Box for 63/100 KVA Transformer with 1No 160Amps 25kA 4Pole MCCB, suitable capacity aluminum bus bar mounted Set 18,270.00
in 16SWG powder coated M.S.Box suitable to mount at Transformer Centre as per BESCOM.
8.17 LT Distribution Box suitable for 250 KVA Transformer with 1No 400Amps 25kA 4Pole MCCB, suitable capacity aluminum bus bar Set 36,720.00
mounted in 16SWG powder coated M.S.Box suitable to mount at Transformer Centre as per BESCOM.
8.18 LT Wiring Kit 63/100 KVA as per standard technical specification as per BESCOM. Set 4,710.00
8.19 LT Wiring Kit 250 KVA as per standard technical specification as per BESCOM. Set 11,610.00
CHAPTER 9 - FANS & AIR CONDITIONERS
9.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V Each 1,700.00
50Hz, AC Supply.
9.2 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

9.2.1 12" Sweep (300mm) Each 3,654.00

9.2.2 15" Sweep (450mm) Each 4,394.00
9.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles.
Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm)

9.3.1.1 Regular model Each 2,376.00

9.3.1.2 Economy model Each 1,900.00
9.3.2 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles.
Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 56" Sweep (1400mm)

BANGALORE CIRCLE ELECTRICAL SR 2014-15 40 / 67

 9.3.2.1 Regular model Each 2,418.00
9.3.2.2 Economy model Each 1,935.00
9.4 Supplying wall mounting fan suitable to operate at single-phase 230v A.C. supply.
9.4.1 300mm Sweep Each 2,424.00
9.4.2 400mm Sweep Each 2,534.00
9.5 Supplying of ……capacity window type air conditioner confirming to IS specification suitable for operation on 230 Volts, 50 Hz single
phase, A.C. supply with all accessories.
9.5.1 1 ton capacity Each 28,200.00
9.5.2 1.5 ton capacity Each 34,080.00
9.5.3 2 ton capacity Each 40,300.00
9.6.1 Supplying of…TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed
compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one
indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard
length of suitable size copper tubing covered with insulation tube.(High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC
copper cable and a battery operated wireless remote unit. 3star

9.6.1.1 1 ton capacity Each 38,836.00

9.6.1.2 1.5 ton capacity Each 46,408.00
9.6.1.3 2 ton capacity Each 65,690.00
9.6.2 Supplying of…TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed
compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one
indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard
length of suitable size copper tubing covered with insulation tube.(High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC
copper cable and a battery operated wireless remote unit. 5star

9.6.2.1 1 ton capacity Each 41,950.00

9.6.2.2 1.5 ton capacity Each 54,225.00
9.6.2.3 2 ton capacity Each 67,060.00
9.7 Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply,
hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run , relay and over load protection, one
ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including
battery operated cordless unit.
9.7.1 2.0 TR Cassette 1 Ph No 82,800.00
9.7.2 3.0 TR Cassette 3 Ph No 103,200.00
9.7.3 4.0 TR Cassette 3 Ph No 116,400.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 41 / 67

 9.8 Supplying, Erecting, Testing, commissioning package type Ductable type split Air-Conditioner with microprocessor control, fitted with
twin scroll Compressor with R22/Latest Refrigerant. The unit shall be pre-wired to operate on 415V, 50Hz AC Supply. The unit shall
comprise , Evaporated condenser unit, Indoor-Outdoor Motor Fans, suitable over vent fins made up of Aluminum , Copper Refrigent
coil, Etc.,. complete and corded control unit.
9.8.1 Capacity : 3TR No 100,990.00
9.8.2 Capacity : 4.25TR No 130,670.00
9.8.3 Capacity : 5.5TR No 133,550.00
9.8.4 Capacity : 8.5TR No 200,190.00
9.8.5 Capacity : 11TR No 260,200.00
9.8.6 Capacity : 17TR No 392,960.00
9.9 Installation charges for 1 to 2 Ton capacity window type Air Conditioner with 50 x 75mm thick teak wood frame of suitable size and Each 1,800.00
allied works complete.
9.10 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Each 3,000.00
Angle Iron support up to 3.0 ton split/cassette type A/C.
9.11 Supplying and installation of insulated refrigerant copper tubing of 5/8`` and 3/8`` with polythene foam insulation 3 core 80 stand
copper wiring between indoor and outdoor unit. Leak testing oil and gas charging for additional piping length of tube.

9.11.1 Split Mtr. 1,193.00

9.11.2 Cassette Mtr. 1,667.00
9.12 Supplying installation testing and commissioning of heavy duty compressor suitable for window/split type A/C.
9.12.1 1 ton capacity Each 9,000.00
9.12.2 2ton capacity Each 9,800.00
9.12.3 3 ton capacity Each 11,600.00
9.13 Supply and fixing of condensing coil for Split Air Conditioners.
9.13.1 1 ton capacity Each 6,600.00
9.13.2 1.5 ton capacity Each 7,500.00
9.13.3 2 ton capacity Each 8,500.00
9.14 Supplying and fixing capacitor`s (of approved make) for window /split air conditioners.
9.14.1 25 to 45mfd running capacitor. Each 500.00
9.14.2 80 to 200mfd starting capacitor. Each 600.00
9.15 Supplying & fixing relay for over load protection for window and split air conditioners. Each 360.00
9.16 Supplying and fixing the fan motor for blowers and condenser of 1/5 HP, single shaft/double shaft suitable for split /window air Each 3,288.00
conditioners.
9.17 Supplying & filling refrigerant (F-22/F/12) for air conditioning equipment's. Which includes the labour & Nitrogen gas for pressure and Per Kg 888.00
leak testing.
9.18 Supplying & fixing of thermostat for window type air conditioner. Multi range 30 to 60 degree Centigrade (without probe), adjustable Each 528.00
universal type

BANGALORE CIRCLE ELECTRICAL SR 2014-15 42 / 67

 9.19 Supplying and fixing electro mechanical / Pneumatic time switches. Each 1,308.00
9.20 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle/L angle of size 6mm x 50mm for mounting out Each 2,290.00
door/indoor A.C. unit./ Batteries.
9.21 Supply and fixing of out door condensing unit complete with condensing coil, blower, fan etc., complete suitable for Split Air
Conditioners.
9.21.1 1 ton capacity Each 20,000.00
9.21.2 1.5 ton capacity Each 21,000.00
9.21.3 2 ton capacity Each 22,000.00
9.22 Supply, installation of 5/8" and 7/8" Hard drawn refrigerant pipe and insulation suitable for 11TR ductable split Air-Conditioner. Mtr 2,000.00

9.23 Supply, fabrication and installation of GI Ducting Along with flanges, supports & all fixing materials.
9.23.1 24Gauge Sqmt 1,050.00
9.23.2 22Gauge Sqmt 1,200.00
9.24 Supply and installation of Thermal insulation using 13mm nitrile rubber for return air ducts. Sqmt 650.00
9.25 Supply and installation of Tarpaulin canvas between the AC duct and AC evaporator unit including accessories. Nos 3,200.00
9.26 Supply and installation of Acoustic insulation using 50mm thick with 24Kg Density glass wool with 24G aluminum perforated sheet Sqmt 800.00
complete.
9.27 Supply and installation of Powder coated aluminum diffusers of size 595x595mm for supply & return air. No 6,200.00
9.28 Supply and fixing of powder coated extruded aluminum grill suitable for supply/return air including all fixing hardware etc.,. Complete.

9.28.1 4'' extruded aluminium grill with 15 deg to 30 deg louvers Mtr 900.00
9.28.2 6'' extruded aluminium grill with 15 deg to 30 deg louvers Mtr 1,200.00
CHAPTER 10 - GEYSERS & SOLAR WATER HEATERS
CHAPTER 11 - NETWORKING & TELECOMMUNICATIONS
11.1 Supplying and drawing UTP-CAT 6E LAN cable. MT. 23.00
11.2 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.
11.2.1 1Pair Rmt. 9.00
11.2.2 2Pair Rmt. 13.00
11.2.3 3Pair Rmt. 16.00
11.2.4 4Pair Rmt. 25.00
11.2.5 5Pair Rmt. 45.00
11.2.6 20pair Rmt. 140.00
11.2.7 50pair Rmt. 275.00
11.3 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. Rmt. 35.00
11.4 Supplying & Fixing of switch mounting rack with power manager & Cable manager .
11.4.1 6U with 450mm depth Each 4,394.00
11.4.2 9U with 450mm depth Each 6,593.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 43 / 67

 11.4.3 12U with 450mm depth Each 7,754.00
11.4.4 18U with 650mm depth Each 16,036.00
11.4.5 24U with 650mm depth Each 23,210.00
11.4.6 27U with 650mm depth Each 24,792.00
11.4.7 32U with 650mm depth Each 26,586.00
11.4.8 36U with 650mm depth Each 28,326.00
11.4.9 42U with 650mm depth Each 31,650.00
11.4.10 42U with 800mm depth Each 34,656.00
11.5 Supplying & Fixing of Power strip Each 1,055.00
11.6 Supplying of shelf Each 791.00
11.7 Supplying & fixing of Castor wheels to the Shelf. (set of 4) Each 1,266.00
11.8 Supplying & Fixing of Fan Each 738.00
11.9 Supplying fixing of Network Switches
11.9.1 48 Port Gigabyte (manageable) Each 34,815.00
11.9.2 24 Port Gigabyte (manageable) Each 31,650.00
11.9.3 10Port Gigabyte (manageable) Each 21,047.00
11.9.4 48 port 10/100 Switch Each 15,192.00
11.9.5 24 port 10/100 Switch Each 3,428.00
11.9.6 16 port 10/100 Switch Each 2,690.00
11.9.7 8 port 10/100 Switch Each 1,107.00
11.9.8 5 port 10/100 Switch Each 738.00
11.9.9 48 port 10/100/1000 Switch Each 18,000.00
11.9.10 24 port 10/100/1000 Switch Each 7,912.00
11.9.11 16 port 10/100/1000 Switch Each 7,015.00
11.9.12 8 port 10/100/1000 Switch Each 2,663.00
11.10 Supplying & fixing of I/O socket with back box
11.10.1 Single I/o Each 369.00
11.10.2 Double I/o Each 590.00
11.11 Supplying & Fixing of …mtrs Cat6 Patch Cable
11.11.1 1mtr Each 211.00
11.11.2 2mtr Each 316.00
11.11.3 3mtr Each 337.00
11.12 Supplying & Fixing of Patch panel for LAN cabling
11.12.1 48 Port 10/100 patch panel Each 13,082.00
11.12.2 24 Port 10/100 patch panel Each 3,692.00
11.12.3 16 Port 10/100 patch panel Each 2,901.00
11.12.4 48 Port 10/100/1000 patch panel Each 21,522.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 44 / 67

 11.12.5 24 Port 10/100/1000 patch panel Each 6,752.00
11.12.6 16 Port 10/100/1000 patch panel Each 6,224.00
CHAPTER 12 - UPS,VOLTAGE STABILIZERS,BATERIES & ACCESSORIES
12.1 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to
full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete.
12.1.1 3KVA Capacity Each 3,974.00
12.1.2 4KVA Capacity Each 4,317.00
12.1.3 5KVA Capacity Each 4,661.00
12.2 Supplying, erecting, testing & commissioning of OFF-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all
accessories complete and Excluding batteries and wiring complete.
12.2.1 1KVA OFF LINE UPS One Hour back up Excluding 2x 40Ah batteries Each 12,376.00
12.2.2 1KVA OFF LINE UPS Two Hour back up Excluding 2x 80Ah batteries Each 12,376.00
12.2.3 2 KVA OFF LINE UPS One Hour back up Excluding 3x 80Ah batteries Each 24,352.00
12.2.4 2 KVA OFF LINE UPS Two Hour back up Excluding 3x 120Ah batteries Each 24,352.00
12.2.5 5 KVA OFF LINE UPS One Hour back up Excluding 6x 80Ah batteries Each 50,293.00
12.2.6 5 KVA OFF LINE UPS Two Hour back up Excluding 6x 120Ah batteries Each 50,293.00
12.2.7 5 KVA OFF LINE UPS Two Hour back up Excluding 6x 150Ah batteries Each 50,293.00
12.3 Supplying, installation, testing & commissioning of 12Volts ..AH batteries in poly propylene container for D.G. sets. Low maintenance
batteries, plate type.
12.3.1 60 AH capacity. Acid batteries. Each 11,800.00
12.3.2 120 AH capacity. Acid batteries. Each 18,700.00
12.3.3 130 AH capacity. Acid batteries. Each 18,700.00
12.3.4 150AH capacity. Acid batteries Each 20,600.00
12.3.5 180 AH capacity. Maintenance free. Each 25,200.00
12.4 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Low maintenance
Tubular batteries.
12.4.1 12 V ,40 AH capacity Acid Battery Each 10,100.00
12.4.2 12 V ,60 AH capacity Acid Battery Each 11,800.00
12.4.3 12 V ,80 AH capacity Acid Battery Each 13,400.00
12.4.4 12 V ,100 AH capacity Acid Battery Each 16,100.00
12.4.5 12 V ,120 AH capacity. Acid Battery Each 18,700.00
12.4.6 12 V ,150 AH capacity. Acid Battery. Each 20,600.00
12.4.7 12 V ,180 AH capacity. Acid Battery Each 25,200.00
CHAPTER 13 - DIESEL GENERATOR SET

BANGALORE CIRCLE ELECTRICAL SR 2014-15 45 / 67

 13.1 Supplying, erection, testing and commissioning of .....KVA Diesel Generating Set on existing CC platform Comprising of Diesel
Engine Developing ..... BHP @ 1500 RPM confirming to BS 5514.The engine should be turbocharged, Air/water cooled with 10 %
over load for 1hour in every 12 hours of operation coupled to suitable capacity alternator rated at 415V, 0.8 PF(lag) 50 Hz, 3 phase, 4
wire system, confirming to BS 5000/IS 4722. The alternator shall be of brushless type ,Screen protected, revolving field, Mounted on
suitable Channel Iron Base Frame, Complete with suitable capacity Fuel Tank, required nos. of Batteries of 12/24V as per
requirement, Acoustic enclosure as per CPCB Approved Norms.
13.1.1 62.5kva/50kw Each 572,400.00
13.1.2 125kva/100kw Each 864,000.00
13.1.3 160kva/128kw Each 1,140,000.00
13.1.4 200kva/160kw Each 1,384,800.00
13.1.5 250kva/200kw Each 1,506,000.00
13.1.6 320kva/256kw Each 1,974,000.00
13.1.7 500kva/400kw Each 3,240,000.00
13.2 Supply, Erection, testing and commissioning of AMF panel suitable for .....KVA DG set. The panel is of cubical type base/floor
mounting control panel with hinged doors, undrilled bottom gland plate, aluminum Bus Bar with the accommodation for .....amps 4
pole contactor for alternator with thermal O/L relay,..... Amps 4 pole contactor for mains, HRC fuse for short circuit protection,
Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic,
Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil
pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over /under speed,
Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains
on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and
Flat/Boost facility.

13.2.1 Up to 62.5kva Each 92,460.00

13.2.2 62.5 KVA-125kva Each 136,557.00
13.2.3 160kva/250kw Each 210,000.00
13.2.4 250kva/380kw Each 360,000.00
13.2.5 500KVA Each 384,000.00
CHAPTER 14 - ELEVATORS
14.1.A Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-PC Finish---20 Passenger elevator is geared equipment
Capacity--2 stops

14.1.A.1 6 Pass Rs 1,177,400.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 46 / 67

 14.1.A.2 8 pass Rs 1,351,300.00
14.1.A.3 10 Pass Rs 1,560,000.00
14.1.A.4 13 Pass Rs 1,629,500.00
14.1.A.5 15 Pass Rs 1,721,900.00
14.1.A.6 20 Pass Rs 2,523,700.00
14.1.B Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-PC Finish---20 Passenger elevator is geared equipment
Capacity--4 stops

14.1.B.1 6 Pass Rs 1,264,000.00

14.1.B.2 8 pass Rs 1,438,000.00
14.1.B.3 10 Pass Rs 1,646,000.00
14.1.B.4 13 Pass Rs 1,715,000.00
14.1.B.5 15 Pass Rs 1,808,500.00
14.1.B.6 20 Pass Rs 2,610,500.00
14.1.C Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-PC Finish---20 Passenger elevator is geared equipment
Capacity--6 stops

14.1.C.1 6 Pass Rs 1,527,000.00

14.1.C.2 8 pass Rs 1,717,500.00
14.1.C.3 10 Pass Rs 1,956,000.00
14.1.C.4 13 Pass Rs 2,015,000.00
14.1.C.5 15 Pass Rs 2,145,000.00
14.1.C.6 20 Pass Rs 2,877,500.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 47 / 67

 14.1.D Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-PC Finish---20 Passenger elevator is geared equipment
Capacity--8 stops

14.1.D.1 6 Pass Rs 1,620,500.00

14.1.D.2 8 pass Rs 1,810,500.00
14.1.D.3 10 Pass Rs 2,049,000.00
14.1.D.4 13 Pass Rs 2,108,000.00
14.1.D.5 15 Pass Rs 2,238,000.00
14.1.D.6 20 Pass Rs 2,970,500.00
14.1.E Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-PC Finish---20 Passenger elevator is geared equipment
Capacity--10 stops

14.1.E.1 6 Pass Rs 1,847,500.00

14.1.E.2 8 pass Rs 2,052,500.00
14.1.E.3 10 Pass Rs 2,309,000.00
14.1.E.4 13 Pass Rs 2,387,000.00
14.1.E.5 15 Pass Rs 2,516,000.00
14.1.E.6 20 Pass Rs 3,370,500.00
14.2.A Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-SS Finish---Capacity--2 stops

14.2.A.1 6 Pass Rs 1,485,500.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 48 / 67

 14.2.A.2 8 pass Rs 1,733,800.00
14.2.A.3 10 Pass Rs 2,017,000.00
14.2.A.4 13 Pass Rs 2,160,000.00
14.2.A.5 15 Pass Rs 2,352,800.00
14.2.A.6 20 Pass Rs 3,154,500.00
14.2.B Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-SS Finish---Capacity--4 stops

14.2.B.1 6 Pass Rs 1,560,000.00

14.2.B.2 8 pass Rs 1,808,000.00
14.2.B.3 10 Pass Rs 2,091,500.00
14.2.B.4 13 Pass Rs 2,234,500.00
14.2.B.5 15 Pass Rs 2,427,000.00
14.2.B.6 20 Pass Rs 3,229,000.00
14.2.C Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-SS Finish---Capacity--6 stops

14.2.C.1 6 Pass Rs 2,059,000.00

14.2.C.2 8 pass Rs 2,379,000.00
14.2.C.3 10 Pass Rs 2,749,500.00
14.2.C.4 13 Pass Rs 2,948,500.00
14.2.C.5 15 Pass Rs 3,130,000.00
14.2.C.6 20 Pass Rs 3,439,000.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 49 / 67

 14.2.D Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-SS Finish---Capacity--8 stops

14.2.D.1 6 Pass Rs 2,139,000.00

14.2.D.2 8 pass Rs 2,459,000.00
14.2.D.3 10 Pass Rs 2,829,500.00
14.2.D.4 13 Pass Rs 3,028,500.00
14.2.D.5 15 Pass Rs 3,220,000.00
14.2.D.6 20 Pass Rs 3,519,000.00
14.2.E Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With machine room-SS Finish---Capacity--10 stops

14.2.E.1 6 Pass Rs 2,515,000.00

14.2.E.2 8 pass Rs 2,941,000.00
14.2.E.3 10 Pass Rs 3,313,500.00
14.2.E.4 13 Pass Rs 3,568,500.00
14.2.E.5 15 Pass Rs 3,710,000.00
14.2.E.6 20 Pass Rs 3,930,000.00
14.3.A Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-PC Finish---Capacity--2 stops

14.3.A.1 6 Pass Rs 1,669,000.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 50 / 67

 14.3.A.2 8 pass Rs 1,738,800.00
14.3.A.3 10 Pass Rs 1,887,800.00
14.3.A.4 13 Pass Rs 1,917,500.00
14.3.A.5 15 Pass Rs 2,017,000.00
14.3.B Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-PC Finish---Capacity--4 stops

14.3.B.1 6 Pass Rs 1,731,000.00

14.3.B.2 8 pass Rs 1,800,700.00
14.3.B.3 10 Pass Rs 1,950,000.00
14.3.B.4 13 Pass Rs 1,979,500.00
14.3.B.5 15 Pass Rs 2,079,000.00
14.3.C Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-PC Finish---Capacity--6 stops

14.3.C.1 6 Pass Rs 2,072,500.00

14.3.C.2 8 pass Rs 2,159,500.00
14.3.C.3 10 Pass Rs 2,328,800.00
14.3.C.4 13 Pass Rs 2,377,000.00
14.3.C.5 15 Pass Rs 2,476,000.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 51 / 67

 14.3.D Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-PC Finish---Capacity--8 stops

14.3.D.1 6 Pass Rs 2,165,500.00

14.3.D.2 8 pass Rs 2,252,500.00
14.3.D.3 10 Pass Rs 2,422,000.00
14.3.D.4 13 Pass Rs 2,470,000.00
14.3.D.5 15 Pass Rs 2,569,000.00
14.3.E Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-PC Finish---Capacity--10 stops

14.3.E.1 6 Pass Rs 2,450,000.00

14.3.E.2 8 pass Rs 2,514,500.00
14.3.E.3 10 Pass Rs 2,702,000.00
14.3.E.4 13 Pass Rs 2,761,800.00
14.3.E.5 15 Pass Rs 2,860,800.00
14.4.A Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-SS Finish ---Capacity--2 stops

14.4.A.1 6 Pass Rs 1,997,000.00

14.4.A.2 8 pass Rs 2,141,000.00
14.4.A.3 10 Pass Rs 2,364,500.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 52 / 67

 14.4.A.4 13 Pass Rs 2,394,500.00
14.4.A.5 15 Pass Rs 2,494,000.00
14.4.B Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-SS Finish ---Capacity--4 stops

14.4.B.1 6 Pass Rs 2,022,000.00

14.4.B.2 8 pass Rs 2,165,800.00
14.4.B.3 10 Pass Rs 2,389,000.00
14.4.B.4 13 Pass Rs 2,420,000.00
14.4.B.5 15 Pass Rs 2,595,000.00
14.4.C Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-SS Finish ---Capacity--6 stops

14.4.C.1 6 Pass Rs 2,587,000.00

14.4.C.2 8 pass Rs 2,804,000.00
14.4.C.3 10 Pass Rs 3,103,000.00
14.4.C.4 13 Pass Rs 3,134,000.00
14.4.C.5 15 Pass Rs 3,233,000.00
14.4.D Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-SS Finish ---Capacity--8 stops

14.4.D.1 6 Pass Rs 2,680,000.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 53 / 67

 14.4.D.2 8 pass Rs 2,897,000.00
14.4.D.3 10 Pass Rs 3,196,000.00
14.4.D.4 13 Pass Rs 3,244,000.00
14.4.D.5 15 Pass Rs 3,343,000.00
14.4.E Design, supplying, erecting testing and commissioning of - passenger/ hospital lift with speed of 1mtr per second, variable voltage
variable frequency drive, with or without machine room for the available well size, operating at 415 V three phax\se 50 cycles AC
supply, powder coated or stainless steel car entrance doors enclosures with flooring, car illumination, emergency light, intercom and
fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call
register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device, voice
announcing in regional languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil
works like fixing of guide rail, counter weight etc., With out machine room-SS Finish ---Capacity--10 stops

14.4.E.1 6 Pass Rs 3,083,500.00

14.4.E.2 8 pass Rs 3,300,000.00
14.4.E.3 10 Pass Rs 3,699,000.00
14.4.E.4 13 Pass Rs 3,758,000.00
14.4.E.5 15 Pass Rs 3,857,800.00
CHAPTER 15 - DIGITAL AUDIO SYSTEMS
15.1 Conference Mic's : Flush Mount
15.1.1 Supply, installation, testing and commissioning of Flush mount model chairman unit with gooseneck mic with ring LED and No 34,800.00
interconnection cable and out sockets for linking next unit with talk and priority switch with Delegate inter face unit aluminum.

15.1.2 Supply, installation, testing and commissioning of Flush mount model delegate unit with gooseneck mic with ring LED and No 32,800.00
interconnection cable and out sockets for linking next unit with talk switch with Delegate interface unit aluminum/PVC housing

15.2 Conference mic's :Table top Models

15.2.1 Supply , installation, testing and commissioning of Table top model chairman unit with gooseneck mic with ring LED and No 12,400.00
interconnection cable and out sockets for linking next unit with talk and priority switch aluminum/PVC housing and headphone sock

15.2.2 Supply , installation, testing and commissioning of Table top model Delegate unit with gooseneck mic with ring LED and No 12,400.00
interconnection cable in and out sockets for linking next unit with talk switch aluminum/PVC housing and headphone socket.

15.3 Conference Controllers

15.3.1 Supply, installation, testing and commissioning of Controller unit with 1 mic input 1 aux PA out, Rec out, rack mountable. can handle Nos 174,000.00
up to 50 to 300 delegate units. With expansion options
15.3.2 Supply, installation, testing and commissioning of Controller unit with 1 mic input 1 aux PA out, Rec out, rack mountable. can handle Nos 38,000.00
up to 60 delegate units. With expansion options.

BANGALORE CIRCLE ELECTRICAL SR 2014-15 54 / 67

 15.4 Conference Cables
15.4.1 Supply, installation, testing and commissioning of, 9 core multistrand high gain low loss cable with required end connectors 10meter No 220.00
to connect between the delegate unit and controller including charges for labour, lead and lifts, loading and unloading

15.4.2 Supply, installation, testing and commissioning of 2 core shielded multistrand high gain low loss cable with required end connectors No 68.00
10meter to connect between the delegate units including charges for labour, lead and lifts, loading and unloading, cost

15.5 Ceiling Speakers

15.5.1 Supply, installation, testing and commissioning of compact ceiling speaker with Back Can power handling up to 6 watt RMS/ watt No 1,450.00
/100volt@ 1456 ohms single channel. selectable taping 5" LF driver and tweeter
15.5.2 Supply, installation, testing and commissioning of compact ceiling speaker with power handling up to 40 Watt RMS 0/100volt@ 1456 No 1,360.00
ohms single channel. selectable taping Specs: Power handling
15.5.3 Supply, installation, testing and commissioning of compact Wall mount speaker with power handling up to 40Watt RMS 0/100volt@ No 6,890.00
1456 ohms single channel. selectable taping Specs: Power handling : 15 to 30 watt Frequency response : 80 Hz t0 18khz Spl:

15.5.4 Supply, installation, testing and commissioning of compact ceiling speaker with power handling up to 6 Watt RMS 0/100volt@ 1456 Nos 910.00
ohms single channel. selectable taping Specs: Power handling
15.6 Amplifiers
15.6.1 Supply, installation, testing and commissioning of booster amplifier with power handling of 250 to 300 watt RMS 4ohms Dual and No 27,550.00
100/70 volt output on bridge mode single channel Rack mountable Specs: frequency response : 20 htz to 20khtz

15.6.2 Supply, installation, testing and commissioning of Mixing amplifier with 4 - 6 mic/ 2 aux in with PA/REC out Single/Dual Channel No 22,160.00
power handling of 60 to 120 watt RMS 4 ohms and 100/70 volt output on bridge mode single channel Rack mountable.

15.7 Audio Mixers

15.7.1 Supply, installation, testing and commissioning of 4 to 6 Channel 4 mic/line input mixer with 2/3 band semi parametric eq 2 bus and 2 No 12,800.00
aux 2 stereo return.
15.7.2 Supply, installation, testing and commissioning of 12Channel 12mic/line 2-4 Stereo input mixer with built in 3 to 4 band semi No 22,400.00
parametric eq 2 bus or 4 bus and 2 to 4 aux outs 2 stereo return. Specs: frequency response of 20 htz to 20 kHz with THD o

15.8 Signal Processors

15.8.1 Supply, installation, testing and commissioning of dual channel feed back controller with 12 band automatic filters per channel 42 bit No 28,500.00
conversion multi band manually selectable parametric equalizer dual channel.
15.8.2 Supply, installation, testing and commissioning of dual channel 31 band Graphic Equalizer with 31 band Controls on each Channel No 18,200.00
filters per channel 6db to 12 db. boost/cut multi band manually selectable parametric equalizer dual channel.

15.9 Wireless microphones

BANGALORE CIRCLE ELECTRICAL SR 2014-15 55 / 67

 15.9.1 Supply, installation, testing and commissioning of cardioids handheld/collar VHF/UHF wireless microphone Transmitter and receiver No 12,900.00
with selectable carrier Frequency from VHF/UHF 179-279 MHz 575 MHz to 875 MHz
15.9.2 Supply, installation, testing and commissioning of cardioids handheld/collar VHF/UHF Economical wireless microphone Transmitter No 5,300.00
and receiver with selectable carrier Frequency from VHF/UHF 179-279 MHz 575 MHz to 875 MHz
15.10 System Racks Supply, installation, testing and commissioning of 19" 20/15U 580 Depth system rack with Front glass door , back door No 12,800.00
with heavy duty wheels with cable manager and power strip and termination plates for signal and speaker out system.

15.11 Speaker Cables Supply, installation, testing and commissioning professional grade 2.5 sq mm TIN coated low loss 2 core multi strand meter 38.00
Oxidation Free speaker cable including, lead and lifts, loading and unloading, cost of conveyance for all the materials with the
accessories.
15.12 Connectors and I/C Cables Supply, installation, testing and commissioning of professional grade audio connectors for inter Set 240.00
connection cables with in the rack and other units as well auditorium as required including charges for labour, lead and lifts, loading
and unloading, cost of conveyance for all the materials with the accessories required for completion as per the detailed specifications.
Neutrick/SR/Amphenol/nT/MX/Equivalent.
CHAPTER 16 -MAINTENANCE WORKS
16.1 Supplying and fixing one of 230 volts bell or buzzer and a flush type bell push with gang box fixed on necessary wooden or rawl plugs Each 145.00
using NF screws.
16.2 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl
plugs using NF screws
16.2.1 Ding Dong Bell Each 200.00
16.2.2 Musical Each 358.00
16.2.3 Remote Each 940.00
16.3 Supplying and fixing/replacing condenser for ceiling fan/MV/SV/MH and other luminaries.
16.3.1 upto 4mfd Each 104.00
16.3.2 8mfd Each 129.00
16.3.3 10mfd Each 151.00
16.3.4 15mfd Each 191.00
16.3.5 20mfd Each 252.00
16.3.6 33mfd Each 388.00
16.3.7 42mfd Each 425.00
16.4 Rewinding a … mm ceiling fan/after using necessary gauge annealed and insulated copper wire with necessary insulating, separators
vibration arresting shellac, etc including replacement of bearings if any transportation to and from the spot to workshop inclusive of
releasing the refixing.
16.4.1 900MM Each 465.00
16.4.2 1050MM Each 580.00
16.4.3 1200MM Each 630.00
16.4.4 1400MM Each 660.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 56 / 67

 16.5 Releasing the existing fan dismantling testing painting after removing the existing painting by scraping and cleaning (spray method) Each 278.00
not less than 2 coats of approved make enamel paint to a ceiling fan and wiring and fixing of the same.
16.6 Supplying and replacing ceiling fan regulator 900mm to 1500mm. Each 156.00
16.7 Releasing an unserviceable thermostat and providing in its place a new 20 amps capacity 25 inch to 85 inch range thermostat. Each 265.00

16.8 Releasing the existing fan checking, testing and installation at the same place. Each 28.00
16.9 Releasing the existing fan checking, testing and installation at the New place. Each 62.00
16.10 Releasing the existing fan and refixing the same in the new place with clamps without `S’ hook complete. Each 70.00
16.11 Supply and fixing of heavy duty open construction ferromagnetic copper ballast for 20/40 watts fluorescent tubes. Each 200.00
16.12 Releasing the existing FTL Fitting all capacities, checking, testing and installing at same place. Each 30.00
16.13 Supply and fixing/replacing of choke for Sodium Vapour lamp fitting in existing fitting mounted on tubular pole.
16.13.1 125Watts Each 1,056.00
16.13.2 250Watts Each 1,950.00
16.13.3 400Watts Each 2,500.00
16.14 Supply and fixing of ...Watts heavy duty open construction ferromagnetic copper ballast for HPSV/HPMH lamps.
16.14.1 70Watts No 1,310.00
16.14.2 150Watts No 1,784.00
16.14.3 250Watts No 2,334.00
16.14.4 400Watts No 3,631.00
16.15 Supplying and fixing/replacing of fluorescent tube.
16.15.1 18 to 40Watts No 75.00
16.15.2 65 to 80Watts No 158.00
16.16 Supplying and fixing MV lamps on existing fitting mounted on tubular pole.
16.16.1 80Watts No 177.00
16.16.2 125Watts No 191.00
16.16.3 160Watts No 321.00
16.16.4 250Watts No 350.00
16.16.5 400Watts No 459.00
16.17.A Supplying and fixing of HPMH lamps on existing fitting mounted on tubular pole Single end
16.17.A.1 70 to150Watts No 912.00
16.17.A.2 250Watts-400Watts No 1,106.00
16.17.B Supplying and fixing of HPMH lamps on existing fitting mounted on tubular pole Twin ended
16.17.B.3 70Watts to150Watts No 507.00
16.17.B.4 250 to 400Watts No 674.00
16.18 Supply and fixing of 230 volts 20/40 watts starter for fluorescent lamp. No 31.00
16.19 Supply and fixing of 230 volts 20/40 watts fluorescent lamp holder. No 31.00
16.20 Supply and fixing of 230 volts CFL lamp holder

BANGALORE CIRCLE ELECTRICAL SR 2014-15 57 / 67

 16.20.1 2Pin Holder No 60.00
16.20.2 4Pin Holder No 83.00
16.21 Supply and fixing of 230 volts Porcelain holder for MV/SV/MH lamp.
16.21.1 70-150Watts lamp Holder No 123.00
16.21.2 250-400Watts lamp Holder No 184.00
16.22 Supply and fixing of 230 volts CFL lamp starter base No 35.00
16.23.1 2KW Capacity No 866.00
16.23.2 3KW Capacity No 926.00
16.24 Supplying and fixing/replacement of pressure relief valve suitable for Geyser. No 506.00
16.25 Supplying and fixing/replacement of Round/ Conical/Diamond shaped HDPE Doom suitable for 125/160Watts post top lamp fittings. No 2,403.00

16.26 Supplying and fixing/replacement of Ignitor suitable for 70 to 400Watts SV/MH fittings. No 523.00
16.27 Supplying and fixing 6Amps capacity 4 way universal shutter type spike buster suitable to operate on 230V 50Hz AC Supply. No 613.00

16.28 Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/Silver paint including
coping/footing of the pole.
16.28.1 Upto 5Mtr street light pole. No 500.00
16.28.2 Above 5.5 to 7.5Mtr street light pole. No 620.00
16.28.3 8Mtr and above street light pole. No 700.00
16.29 Supplying and fixing of 28 watts energy saving device (electronic ballast) with less than 10% THD & P.F>0.9 cut off facility, short No 950.00
circuit proof suitable for18/36/40 watts existing fluorescent fitting and completely wired used on 90 to350 volts 50 Hz AC supply.

16.30 Filtering of oil in the transformer at the transformer center by hot process using "Stream line filter" such time the dielectric strength of Litre 20.00
the oil in the transformer conforms to ISI specification [Test certificate to be produced]
16.31 Supplying and fixing of ….mm dia 2mm wall thickness 15 KV class alkathine pipe to bus bar leads etc., at sub station.
16.31.1 19 mm Mtrs 37.00
16.31.2 25 mm Mtrs 40.00
16.32 Supplying and filling fresh silica gel to the breather of transformers. Per breather 140.00
16.33 Supplying and Testing of OIL for Di-Electric strength (BDV) / Acidity Per Sample 197.00
16.34 Supplying and Topping -up of new Transil OIL Per Litre 170.00
CHAPTER 17 -FIXING CHARGES
17.1 Supplying and Fixing of........mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket
1x40/2x40 watts fluorescent tube street light fitting of all capacities to GI or CI or rail or RCC pole / wall using suitable clamps, bolts,
and nuts and wiring using suitable capacity wires.
17.1.1 Using 25mm dia G.I.pipe Each 825.00
17.1.2 Using 32mm dia G.I.pipe Each 893.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 58 / 67

 17.2 Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to
which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole,
using suitable clamps, bolts ,nuts and wiring using suitable capacity wires.
17.2.1 Using 25mm dia G.I.pipe Each 1,050.00
17.2.2 Using 32mm dia G.I.pipe Each 1,140.00
17.2.3 Using 40mm dia G.I.pipe Each 1,321.00
17.3 Supplying and Fixing 50mm class A GI pipe up to 4.5 mtrs. long with a reducing collar of 50x40mm to which, an extension of 250 mm Each 2,258.00
pipe is fixed for 125 or 250/400 watts MV / sodium vapour street light fitting, using suitable clamps, bolts ,nuts, and wiring using
suitable capacity wires.
17.4 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S.
bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 mtrs. M.
S. tubular pole, with necessary two coats of painting, with all other accessories.
17.4.1 Single bracket 1.5 Mtr. Length Each 1,292.00
17.4.2 Single bracket 2 Mtr. Length Each 1,677.00
17.4.3 Double bracket 2x1.5 Mtr. Length Each 2,158.00
17.4.4 Double bracket 2x2 Mtr. Length Each 2,543.00
17.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring Each 176.00
using suitable capacity wires.
17.6 Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring Each 145.00
using suitable wires.
17.7 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters /
girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.
17.7.1 On wall / ceiling / Rafter / Girders Each 98.00
17.7.2 Using necessary length of G.I. chain Each 210.00
17.7.3 Using 1 Mtr long 19mm 18 SWG enameled brazed conduit of two nos. rod pendent with ball socket with check nuts all nickel plated Each 263.00

17.7.4 Using 2 Mtr long 19mm 18 SWG enameled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel plated Each 504.00
17.8 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and Each 139.00
fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.
17.9 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling Each 237.00
rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden
board and wired.
17.10 Extra length of GI pipe of class B 19mm dia for down rod. Mtr. 164.00
17.11 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with Each 680.00
bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and
wooden frame.
17.12 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC Each 412.00
insulated twin core wire.

BANGALORE CIRCLE ELECTRICAL SR 2014-15 59 / 67

 17.13 Erection charges for fixing a …liters capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts
and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top.
17.13.1 Up to 30 Litres Each 618.00
17.13.2 35 to 50 Litres Each 651.00
17.13.3 70 to 100 Litres Each 690.00
17.14 Erection of single phase preventer / ammeters / including fixing selector switch / voltmeter / current operated earth leakage circuit breakers / voltage Each 157.00
operated circuit breaker / above 100A fuse channel set (3 Nos) HRC fuses above 100A (3 Nos.) / Digital ammeter/digital volt meter/set of 3 indicating
lamps /MCB / Relays /A-V selector switches including wiring using suitable capacity wires, bolts, nuts, screws.

17.15 Fixing a shunt capacitor of … KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one
17.15.1 capacitor.
Up to 5 KVAR Each 211.00
17.15.2 6 to 10 KVAR Each 249.00
17.15.3 11 to 20 KVAR Each 312.00
17.16 Fixing of ..... Amps TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required
capacity wires and circuit labeling.
17.16.1 15A to 63A TPST Each 238.00
17.16.2 100A to 250A TPST Each 387.00
17.16.3 300A to 400A TPST Each 504.00
17.16.4 15A to 63A TPDT/COS Each 250.00
17.16.5 100A to 250A TPDT/ COS Each 411.00
17.16.6 300A to 400A TPDT/COS Each 516.00
CHAPTER 18 -MATERIAL COMPONENTS
1 PVC conduit pipe 2mm/2.5mm wall thickness. ISI marked 20 mm Mtr 21.00
2 PVC conduit pipe 2mm/2.5mm wall thickness. ISI marked 25 mm Mtr 27.00
3 PVC conduit pipe 2mm/2.5mm wall thickness. ISI marked 32 mm Mtr 45.00
4 PVC conduit pipe 2mm/2.5mm wall thickness. ISI marked 40 mm Mtr 50.00
5 PVC Bend 20 mm Nos 7.00
6 PVC Bend 25 mm Nos 10.00
7 PVC Bend 32 mm Nos 22.00
8 PVC Bend 40 mm Nos 35.00
9 PVC coupler/collers 20 mm Nos 2.50
10 PVC coupler/collers 25 mm Nos 4.00
11 PVC coupler/collers 32 mm Nos 6.00
12 PVC coupler/collers 40 mm Nos 10.00
13 PVC coupler/collers Heavy gauge saddles Nos 5.00
14 PVC coupler/collers NF screws Nos 0.50
15 PVC coupler/collers TW plugs/Rawl plugs Nos 2.50
16 Metal Junction Box 20 mm Nos 27.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 60 / 67

 17 Metal Junction Box 25 mm Nos 32.00
18 Metal Junction Box 32 mm Nos 48.00
19 Metal Junction Box 40 mm Nos 53.00
20 Deep Junction Box 19/20 mm Jun Box Each 28.00
21 Deep Junction Box 25 mm Jun Box Each 32.00
22 Deep Junction Box 32 mm Jun Box Each 48.00
23 Deep Junction Box Metal Fan Box with Round Hook Each 53.00
24 Deep Junction Box M S Rafter Clamp Each 52.00
25 Deep Junction Box S Hook Each 20.00
26 Metal Box 75x75x65 mm No 34.00
27 Metal Box 100x75x65 mm No 36.00
28 Metal Box 135x75x65 mm No 41.00
29 Metal Box 180x60x65 mm No 47.00
30 Metal Box 135x160x65 mm No 53.00
31 Metal Box 200x90x65 mm No 55.00
32 Metal Box 200x200x65 mm No 86.00
33 Teak wood box 300x300x76 mm (12"x12"x3") Each 45.00
34 Teak wood box 300x228x76 mm (12"x9"x3") Each 30.00
35 Teak wood box 254x178x76 mm (10"x7"x3") Each 21.00
36 Teak wood box 203x152x76 mm (8"x6"x3") Each 9.00
37 Teak wood box 101x101x76 mm (4"x4"x3") Each 5.00
38 Teak wood box plastic round block/Wooden chekka Each 4.00
39 Teak wood box 1 to 2 way gang box Each 14.00
40 Teak wood box 3 to 4 way gang box Each 15.00
41 Teak wood box 5 to 6 way gang box Each 20.00
42 Teak wood box 6 to 10 way gang box Each 35.00
43 Teak wood box 50 mm tapered wooden PLUG Each 3.30
44 PVC Casing 20/19 mm Mtr 10.00
45 PVC Casing 25 mm Mtr 12.00
46 PVC Casing 32 mm Mtr 19.00
47 PVC Casing 40 mm Mtr 23.00
48 PVC Casing 50 mm Mtr 26.00
49 PVC Casing Saddles Each 8.12
50 Flexible pipe 20/19 mm Mtr 6.00
51 Flexible pipe 25 mm Mtr 12.00
52 Flexible pipe 32 mm Mtr 14.00
53 Flexible pipe 40 mm Mtr 20.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 61 / 67

 54 Flexible pipe 50 mm Mtr 26.00
55 PVC insulated Multy strand FRLS Copper conductor 1 Sq.mm Mtr 9.35
56 PVC insulated Multy strand FRLS Copper conductor 1.5 Sq.mm Mtr 13.75
57 PVC insulated Multy strand FRLS Copper conductor 2.5 Sq.mm Mtr 22.20
58 PVC insulated Multy strand FRLS Copper conductor 4 Sq.mm Mtr 32.45
59 PVC insulated Multy strand FRLS Copper conductor 6 Sq.mm Mtr 49.60
60 PVC insulated Multy strand FRLS Copper conductor 10 Sq.mm Mtr 84.50
61 PVC insulated Multy strand FRLS Copper conductor 16 Sq.mm Mtr 134.50
62 PVC Flexible copper wire14/.0039 Coil 400.00
63 PVC Flexible copper wire 23/.0075 Coil 500.00
64 PVC Flexible copper wire 23/.0060 Coil 500.00
65 PVC Flexible copper wire 40/.0039 Coil 800.00
66 Multy strand multi core PVC insulated unarmoured copper cable 1.5 Sqmm 2core Mtr 30.30
67 Multy strand multi core PVC insulated unarmoured copper cable 1.5 Sqmm 3core Mtr 42.40
68 Multy strand multi core PVC insulated unarmoured copper cable 1.5 Sqmm 4core Mtr 55.00
69 Multy strand multi core PVC insulated unarmoured copper cable 1.5 Sqmm 6core Mtr 118.80
70 Multy strand multi core PVC insulated unarmoured copper cable 1.5 Sqmm 8core Mtr 153.23
71 Multy strand multi core PVC insulated unarmoured copper cable 1.5 Sqmm 10core Mtr 199.80
72 Multy strand multi core PVC insulated unarmoured copper cable 2.5 Sqmm 2core Mtr 48.40
73 Multy strand multi core PVC insulated unarmoured copper cable 2.5 Sqmm 3core Mtr 67.10
74 Multy strand multi core PVC insulated unarmoured copper cable 2.5 Sqmm 4core Mtr 87.40
75 Multy strand multi core PVC insulated unarmoured copper cable 2.5 Sqmm 6core Mtr 198.90
76 Multy strand multi core PVC insulated unarmoured copper cable 2.5 Sqmm 8core Mtr 245.00
77 Multy strand multi core PVC insulated unarmoured copper cable 2.5 Sqmm 10core Mtr 312.00
78 Multy strand multi core Flat bore well cable 1.5 Sqmm 22/0.3mm dia Mtr 45.00
79 Multy strand multi core Flat bore well cable 2.5 Sqmm 36/0.3mm dia Mtr 69.70
80 Multy strand multi core Flat bore well cable 4 Sqmm 36/0.3mm dia Mtr 103.40
81 Multy strand multi core Flat bore well cable 6 Sqmm 56/0.3mm dia Mtr 155.00
82 Modular PVC box 1-3 Way Nos 33.00
83 Modular PVC box 4-5 Way Nos 49.00
84 Modular PVC box 6-8 Way Nos 75.00
85 Modular PVC box 10-12 Way Nos 91.00
86 Modular metal box 1-3 Way Nos 24.00
87 Modular metal box 4-5 Way Nos 33.00
88 Modular metal box 6 Way Nos 55.00
89 Modular metal box 8 Way Nos 71.00
90 Modular metal box 10-12 Way Nos 87.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 62 / 67

 91 Modular metal box 16 Way Nos 98.00
92 Modular Polycarbonate Plate 1-3 Module Nos 39.00
93 Modular Polycarbonate Plate 4-5 Way Nos 50.00
94 Modular Polycarbonate Plate 6 Way Nos 92.00
95 Modular Polycarbonate Plate 8 Way Nos 115.00
96 Modular Polycarbonate Plate 10-12 Way Nos 137.00
97 Modular Polycarbonate Plate 16 Way Nos 171.00
98 Modular switches 6A SP Nos 38.00
99 Modular switches 6amps two way Nos 58.00
100 Modular switches 6amps 3 way socket Nos 65.00
101 Modular switches stepped fan regulator Nos 224.00
102 Modular switches 600 watt dimmer Nos 223.00
103 Modular switches 1000-1200 watt dimmer Nos 435.00
104 Modular switches 16 amps one way switch Nos 80.00
105 Modular switches 32 Amps DP switch with out indicator Nos 122.00
106 Modular switches 32 Amps DP switch with indicator Nos 127.00
107 Modular switches 16 Amps Combined switch and socket with neon indicator Nos 138.00
108 Modular switches 6amps bell push Nos 58.00
109 Modular switches 6/16Amps universal Socket Nos 108.00
110 Modular switches TV socket Nos 54.00
111 Modular switches RJ45/IO Outlet Nos 155.00
112 Modular switches 32Amps security and energy saving DP switch Nos 122.00
113 Junction Box Cover 80mm dia Nos 4.50
114 Junction Box Cover 110mm dia Nos 6.00
115 Industrial plug 2pole+earth 250V, 10Amps Nos 145.00
116 Industrial plug 2pole+earth 250V, 20Amps Nos 160.00
117 Industrial plug 2pole+earth 440V, 20Amps Nos 208.00
118 Industrial plug 2pole+earth 440V, 30Amps Nos 230.00
119 Industrial socket 2pole+earth 250V, 10Amps Nos 145.00
120 Industrial socket 2pole+earth 250V, 20Amps Nos 160.00
121 Industrial socket 2pole+earth 440V, 20Amps Nos 208.00
122 Industrial socket 2pole+earth 440V, 30Amps Nos 230.00
123 Metal Socket set of 2pole earth plugs SP and N 10Amps Each 700.00
124 Metal Socket set of 2pole earth plugs SP and N 20Amps Each 720.00
125 Metal Socket set of 2pole earth plugs TP and n 20Amps Each 930.00
126 Metal Socket set of 2pole earth plugs TP and n 30Amps Each 1,300.00
127 Regular Switches (Flush type) 6amps SP switch Nos 17.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 63 / 67

 128 Regular Switches (Flush type) 6amps SP 2way Nos 28.00
129 Regular Switches (Flush type) 6amps 5 Pin socket Nos 26.00
130 Regular Switches (Flush type) 6amps 3 Pin Top Nos 25.00
131 Regular Switches (Flush type) 6 A bakelite ceiling rose Nos 19.00
132 Regular Switches (Flush type) 6Amps lamp holder Nos 20.00
133 Regular Switches (Flush type) 6A bell push Nos 18.00
134 Regular Switches (Flush type) Electronic stepped regulator Nos 153.00
135 Regular Switches (Flush type) 6A Bell Buzzer Nos 80.00
136 Regular Switches (Flush type) 32Amps DP Switch Nos 110.00
137 Regular Switches (Flush type) 3 pin top 16 Amps Nos 55.00
138 Regular Switches (Flush type) 16Amps Switch Nos 65.00
139 Regular Switches (Flush type) 16Amps/Socket/Universal Nos 56.00
140 Regular Switches (Flush type) 16Amps Combined Wall Plug Nos 190.00
141 Regular Switches (Flush type) Pendent Holder Nos 30.00
142 GLS Lamp Zero Watts clear or coloured Nos 11.25
143 GLS Lamp 40/60/100Watts Lamp Nos 25.00
144 2pin/4 pin CFL Lamp 9-11 Watts Nos 67.00
145 2pin/4 pin CFL Lamp 14 Watts Nos 100.00
146 2pin/4 pin CFL Lamp 18 Watts Nos 138.00
147 2pin/4 pin CFL Lamp 36 Watts Nos 121.00
148 Halogen lamps 500 Watts Nos 58.00
149 Halogen lamps 1000 Watts Nos 72.00
150 Fluorescent tube 2'-14 Watts T5 Nos 92.00
151 Fluorescent tube 4'-28 Watts T5 Nos 100.00
152 Fluorescent tube 2'/4' - 36/40 Watts Nos 40.00
153 Fluorescent tube 5'-80 Watts Nos 189.00
154 Fluorescent tube 5'-80 Watts colour Nos 200.00
155 HPMH/HPSV lamps 70/150 Watts Nos 738.00
156 HPMH/HPSV lamps 250/400 Watts Nos 899.00
157 HPMH/HPSV lamps 70 Watts Double Ended Lamp Nos 400.00
158 HPMH/HPSV lamps 150 Watts Double Ended Lamp Nos 539.00
159 High pressure Mercury vapour lamps 80 Watts Nos 125.00
160 High pressure Mercury vapour lamps 125 Watts Nos 137.00
161 High pressure Mercury vapour lamps 160 Watts Nos 186.00
162 High pressure Mercury vapour lamps 250 Watts Nos 269.00
163 High pressure Mercury vapour lamps 400 Watts Nos 360.00
164 Patti type Flourescent fitting electronic ballast 1x2' - 14 Watts Set 493.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 64 / 67

 165 Patti type Flourescent fitting electronic ballast 1x4' - 28 Watts Set 558.00
166 Box type Flourscent fitting electronic ballast 1x4' - 28 Watts Set 830.00
167 Box type Flourscent fitting electronic ballast 2x4' - 28 Watts Set 1,400.00
168 Mirror optic Flourscent with electronic ballast fitting 1x4'-28 Watts Set 2,386.00
169 Mirror optic Flourscent with electronic ballast fitting 2x4'-28 Watts Set 3,557.00
170 Modular fitting with CFL lamps 2'x2-2 x 36W Set 3,963.00
171 Modular fitting with CFL lamps 2'x2-3 x 36W Set 4,326.00
172 Industrial Flourscent fitting with lamp 1 x 4' - 28 Watts Set 1,073.00
173 Industrial Flourscent fitting with lamp 2 x 4' - 28 Watts Set 1,722.00
174 Flourscent street light fitting with lamp 1x4'-28Watts Set 1,655.00
175 Flourscent street light fitting with lamp 2x4'-28Watts Set 1,951.00
176 HP Metal halide street light fitting with lamp and control gear box 70 watts Set 4,691.00
177 HP Metal halide street light fitting with lamp and control gear box 150 watts Set 5,250.00
178 HP Metal halide street light fitting with lamp and control gear box 250 watts Set 6,166.00
179 High pressure Metal halide flood light luminaire with control gear box 150 watts Set 5,583.00
180 High pressure Metal halide flood light luminaire with control gear box 250 watts Set 5,754.00
181 High pressure Metal halide flood light luminaire with control gear box 400 watts Set 8,593.00
182 High pressure Metal halide flood light luminaire with control gear box 2x250 watts Set 16,798.00
183 High pressure Metal halide flood light luminaire with control gear box 2x400 watts Set 18,998.00
184 High pressure sodium vapor street light luminaire with control gear box 150 watts Set 4,678.00
185 High pressure sodium vapor street light luminaire with control gear box 250 watts Set 5,750.00
186 Post top lantern fitting with CFL lamps with 1 x 18w Set 2,102.00
187 Post top lantern fitting with CFL lamps with 2 x 18w Set 3,061.00
188 Post top lantern fitting with CFL lamps with 3 x 18w Set 3,161.00
189 Down light fitting with gear box and CFL lamp 1 x18 watts Set 1,065.00
190 Down light fitting with gear box and CFL lamp 2 x18 watts Set 1,191.00
191 Squre/rectangular fitting with gear box and CFL lamp 1 x 18W CFL lamps Set 1,437.00
192 Squre/rectangular fitting with gear box and CFL lamp 2 x 18W CFL lamps Set 1,616.00
193 Squre/rectangular fitting with gear box and CFL lamp Heavy duty under water luminary with 100/120watts lamp Set 4,000.00
194 High pressure Mercury vapour street light 125 watts Set 3,137.00
195 High pressure Mercury vapour street light 250 watts Set 4,269.00
196 Induction flood light integral luminary fittings high bay 400 Watts Set 33,002.00
197 Induction street light integral luminary fittings 70 Watts Set 17,038.00
198 Induction street light integral luminary fittings 120 Watts Set 21,348.00
199 Induction street light integral luminary fittings 200 Watts Set 26,349.00
200 LED light fitting 1 x 2' -14 watts Set 1,167.00
201 LED light fitting 2 x 2' -14 watts Set 1,648.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 65 / 67

 202 LED light fitting 1 x 4' -14 watts Set 1,479.00
203 LED light fitting 2 x 4' -14 watts Set 3,297.00
204 LED square or round down light 5x1 watts Set 1,190.00
205 LED square or round down light 12x1 watts Set 1,556.00
206 LED modular downlight 2x2' 36 watts Set 6,869.00
207 LED modular downlight 2x2' 55 watts Set 7,728.00
208 LED post top lantern fitting 12 Watts Set 6,004.00
209 LED post top lantern fitting 24 Watts Set 13,275.00
210 LED street light 24 Watts Set 5,760.00
211 LED street light 43 Watts Set 10,320.00
212 LED street light 65 Watts Set 15,600.00
213 LED Floodlight 60 Watts Set 5,941.00
214 LED Floodlight 90 Watts Set 12,205.00
215 LED Floodlight 110 Watts Set 14,661.00
216 LED Floodlight 150 Watts Set 19,648.00
217 Heavy duty open construction ferromagnetic copper ballast for flourscent fittings 20/40/65/80 Watts Each 314.00
218 Electronic Ballast for flourscent fittings 2'/4' -14W/24W/28 Watts T5 Each 314.00
219 Condensor for ceiling fan/MV/SV/MH ad other luminaires upto 4mfd Each 64.00
220 Condensor for ceiling fan/MV/SV/MH ad other luminaires 8mfd Each 85.00
221 Condensor for ceiling fan/MV/SV/MH ad other luminaires 10mfd Each 103.00
222 Condensor for ceiling fan/MV/SV/MH ad other luminaires 15mfd Each 137.00
223 Condensor for ceiling fan/MV/SV/MH ad other luminaires 20mfd Each 188.00
224 Condensor for ceiling fan/MV/SV/MH ad other luminaires 32mfd Each 280.00
225 Condensor for ceiling fan/MV/SV/MH ad other luminaires 33mfd Each 301.00
226 Condensor for ceiling fan/MV/SV/MH ad other luminaires 42mfd Each 314.00
227 Sodium Vapour lamp Electro Magnetic Ballast with Copper winding of Orthocyclic winding coil. Class H insulated dual coated copper Each 858.00
wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID Ballast tw=130 deg C and
tempertaure rise T=70 deg C 70W/150W
228 Sodium Vapour lamp Electro Magnetic Ballast with Copper winding of Orthocyclic winding coil. Class H insulated dual coated copper Each 1,832.00
wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID Ballast tw=130 deg C and
tempertaure rise T=70 deg C 150W/250W
229 Sodium Vapour lamp Electro Magnetic Ballast with Copper winding of Orthocyclic winding coil. Class H insulated dual coated copper Each 2,977.00
wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID Ballast tw=130 deg C and
tempertaure rise T=70 deg C 400 watts
230 Electro Magnetic ballast Mercury Vapour Lamp 125 Watts Each 858.00
231 Electro Magnetic ballast Mercury Vapour Lamp 250 Watts Each 1,603.00
232 Electro Magnetic ballast Mercury Vapour Lamp 400 Watts Each 2,061.00

BANGALORE CIRCLE ELECTRICAL SR 2014-15 66 / 67

 233 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 1,036.00
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 70W
234 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 1,431.00
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 150W
235 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 1,889.00
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 250W
236 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 2,937.00
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 400W
237 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 18.00
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 230 Volts 20/40 Watts starter for Flourscent lamp

238 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 12.00
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 230 Volts 20/40 Watts Flourscent lamp holder

239 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 45.80
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 230V CFL lamp holder 2 pin
240 Open Type Heavy Duty Ferromagnetic Copper Ballast for HPMH lamps with copper winding of Orthocyclic winding coil. Class H Each 55.00
insulated dual coated copper wire. Complaince to IEC 61347-2-9 Safety and IEC 60923-Performance. Winding Temperature for HID
Ballast tw = 130 deg C and temperature rise T= 70 deg C 230V CFL lamp holder 4 pin

BANGALORE CIRCLE ELECTRICAL SR 2014-15 67 / 67