single phase to three phase converter www.lgis.
cc
Single phase to three phase converter
Description:
Our SDT series Power Phase converter is one of the most advanced AC to
AC conversion products in the world which can convert ordinary single-phase
power to industrial three-phase power.
It can solve production inconvenience because of some areas with the
three-phase electric power restrictions, also solved some user requirements
that can’t apply for the three-phase electric because of space limitation.
It has the main advantages of high quality sine wave AC output,
microcomputer control, humanness design, high efficiency, low no-load loss
and no pollution.
The converter can supply AC power to all kinds of electric equipment, electric
motors, pump, compressor, and other industrial power supply. Applicable to
all types of load.
Technical Feature:
1) The input voltage, output voltage, frequency and phase can be custom made.
2) Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. VFD is especially used
for taking inductive load more easily. This function is very convenient for users and also reduce frequency
converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
3) Output AC Power is suitable for all types of home appliances,electric tools, electric motors etc.
4) Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency
and stable performance. It with powerful protection function for short circuit, over load, over
temperature. Service life can reach 15-20 years.
5) Pure sine wave output. with good transient response, little harmonic distortion, higher conversion
efficiency and stable output voltage features.
6) Adopted low frequency isolated transformer, safe and reliable, single phase input power is completely
isolated from three phase output power, high conversion efficiency, high instantaneous power, stable
performance and low load loss.
7) Adopts new magnetism material, largely reduce machine consumption, making efficiency maximum up to
98%.
8) Adopts America DSP chip, safe and reliable.
9) Adopts black pure aluminum radiator, which confirms the best radiating performance
10) Converter has the function of filtering the grid disturbance and interference at the same time, which is a
good performance of stabilized voltage and frequency power, to provide a more stable and pure power
supply environment for the back end devices
11) Intelligent fan speed control system, low no-load loss
12) LCD display, high efficiency, easy installation
13) The output frequency 50Hz/60Hz can be set
1
single phase to three phase converter www.lgis.cc
Remarks: AC Input: L and Neutral wire
AC Output: L1, L2, L3, Neutral Wire and Ground wire
Technical data
Model SDT-30KW
Isolation Low Frequency Transformer
Input Phases Single phase
AC Input Input rated voltage（VAC） 220VAC(L to N 220V)
Input rated current（A） 136.4A
Rated AC output power 30KW
AC output waveform Pure sine wave
AC Output
Output Phases Three phase + N + PE
Output rated voltage 220VAC ±3%(L1-L2-L3 to N 127V, L1-L2-L3 220V)
2
single phase to three phase converter www.lgis.cc
Output Frequency 60Hz±0.05Hz
Output rated current（A） 78.7A (per phase)
Power Factor（PF） >0.95
Overload Ability 150%, 10s
Efficiency >94%
Waveform distortion rate
<3%（Linear load）
(THD)
Crest Factor (CF) 3:1
Display LCD
Electrical insulation
2500Vac, 1 Minute
properties
Ambient temperature -15~+55℃
Using environment
0~90%，No condensation
humidity
Input under voltage, over voltage, output over-current, short
Protection
circuit, overheating etc.
Cooling method Fan-cooled
Noise <40dB
Degree of protection IP20（indoor）
Structure
Using altitude（m） ≤3000
Dimensions (mm) 600x700x1000mm
Weight (Kg) 260Kg
CE EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005,
Standard EN61000-3-12:2005, EN61000-3-11:2000
