High-Speed I/O Testing with the Power of Two
By Dave Armstrong, Director of Business Development, Advantest America, Inc.
As the internet backbone speed continues to spiral upwards, the interface speeds to the
devices making up the cloud also continue to scale up. As many of these interface,
server and artificial intelligence (AI) devices move both to 112Gbps data rates and
multi-chip heterogeneous integrations, the industry is facing an increased need for at-
speed testing in order to confirm truly known-good devices (KGDs). Until now, an
elegant, efficient ATE-based solution for conducting these tests hasn’t been available.
In 2018, Advantest and MultiLane, Inc., a leading supplier of high-speed I/O (HSIO) test
instruments, began to explore partnering together to provide a single-platform solution
leveraging the best capabilities and qualities of both companies. A fast-growing
company founded in 2007, MultiLane is based in Lebanon, where CEO and industry
veteran Fadi Daou is committed to expanding the tech industry. With more 200 products
and over 500 customers, MultiLane’s product and technology portfolio, as well its
corporate culture, are highly complementary to Advantest’s.
The concept of the joint solution is straightforward: existing MultiLane instruments are
ported to a form factor compatible with Advantest’s V93000 test head extension frame,
as illustrated in Figure 1. As the figure shows, the combined solution consists of an
Advantest V93000 tester and twinning test head extension from Advantest, to which
MultiLane adds power, cooling and a backplane to create the HSIO card cage.
MultiLane then takes existing off-the-shelf instruments and re-lays them out for inclusion
in the card cage, which sits on top of the V93000 test head. The use of existing
instruments is a key aspect because it contributes to lower cost of test while delivering
an already proven capability – just in an ATE environment.
Figure 1. The basic components of the Advantest-MultiLane solution combine to create
a unique test offering.
Delving down further into the specifics, Figure 2 illustrates the build-up of the solution.
On the bottom is a family board – one of two DUT boards in the build-up – which the
customer can typically purchase once and reuse for a variety of testing needs. This
bottom board routes the V93000 signals being used to the pogo-block segments located
in the HSIO card cage just above, which are then routed to the twinning DUT board at
the top of the stack. Multiple MultiLane backplane cassettes sit just underneath the DUT
board and device socket, enabling the shortest possible interconnect lead length via
high-performance coaxial cabling. The number of cassettes is expandable to include as
many as 32 digital storage oscilloscope (DSOs) or 32 bit-error-rate tester (BERT)
channels.
Figure 2. The photo at left shows the view from the top of the HSIO card cage with the
twinning DUT board and MultiLane instruments removed.
The setup is designed to be highly configurable. High-speed signals are routed from
blind-mate wide-bandwidth connectors to the twinning DUT board mounted connectors
adjacent to the DUT. These connectors may be either on the top or on the bottom of the
twinning DUT board to provide an optimal signal-integrity solution. Putting the
connections on the top of the DUT board allows for direct connection to device signals
without the need for routing through vias. For probing, the probe is typically installed on
top of the DUT board, with the wide-band connections made on the bottom. Moving the
connectors to the bottom allows the probe to be the only thing extending from the top of
the DUT board, as required in a wafer-probe environment.
Another configurable aspect of this solution-set is how bias-tees and splitters are
utilized. While very wideband components, these circuits always cause some signal
attenuation and distortion. Some users prefer to maximize the signal swing and integrity
by not including these circuits in the path. Other users have plenty of amplitude and
want the added testability afforded by these components to perform DC tests and/or
feed low-frequency scan signal through their HSIO. The flexibility of this approach
supports both solutions and allows users to change between them on a part-by-part
basis.
Multiple instruments broaden capabilities
MultiLane presently has three pluggable instruments available to coordinate with the
V93000 and HSIO card cage. The first can accommodate 58Gbps four-level pulse
amplitude modulation (PAM4), while the second is twice the frequency at 112Gbps –
the “new normal” data rate. The third is a full, four-channel 50GHz bandwidth sampling
oscilloscope, integrated into the solution at a cost far lower than that of a standalone
scope, with the same capabilities.
Figure 3. MultiLane instruments are packaged in cassettes for insertion into the HSIO
card cage.
To ensure the platform solution meets customers’ needs and complementary roadmaps,
the MultiLane software and tools are tightly integrated with the V93000. MultiLane eye
diagrams and scope plots can be brought up in standard V93000 SmarTest tools (see
samples in Figure 4). The scope can also analyze results in the frequency domain to
provide a distortion analysis, as is typically done on a vector network analyzer (VNA).
Figure 4a. MultiLane BERT output waveforms shown on the V93000.
Figure 4b. MultiLane DSO measurements shown on the V93000.
Conserving tester resources
A noteworthy capability of the solution is that the entire HSIO card cage and MultiLane
instrument assembly can be used on the bench together with the V93000 DUT boards –
i.e., they can run independent of the tester. In some cases, it may be possible to add a
simple bench power supply and a PC interface to allow some long-running
measurements to be made without the V93000.
Returning the HSIO card cage on the tester, a local PC can also be used to talk to the
MultiLane instruments via the internet. For example, the tester’s SmarTest program can
be sequenced to an area of interest and pause, at which point a PC can interact with
the MultiLane hardware to interactively explore and analyze the results – much like a
scope would be used in the old days, only without the need for probing the fine-
geometry wide-bandwidth interfaces. This unique capability both improves the utilization
of the HSIO Instruments and allows the user’s offline experience, with the device and
instruments to be leveraged into the ATE environment thereby improving efficiencies in
both locations.
Bringing it all together
Developing leading-edge test solutions in the 112Gbps area requires close collaboration
and involvement with experienced high-speed I/O experts. Working together with our
mutual customers, Advantest and MultiLane can leverage the strengths of both
companies to help ensure success and provide the full benefits of this truly unique ATE-
meets-HSIO test-platform solution.
