Scribd
Upload
2K views1 page

Saf Con (Cargo Ship Safety Construction) Certificate

The document outlines the preparations needed for a cargo ship safety construction survey, including checking emergency towing arrangements, anchors and chain cables, ballast and bilge pumping systems, and communication between the engine room and bridge. The survey also involves inspecting the ship's structural strength, watertight integrity, main machinery, ventilation systems, boilers, pressure vessels, electrical systems, and other key components to ensure safety.

Uploaded by

Visveswaran Inbasekaran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Saf Con (Cargo Ship Safety Construction) Certificate

The document outlines the preparations needed for a cargo ship safety construction survey, including checking emergency towing arrangements, anchors and chain cables, ballast and bilge pumping systems, and communication between the engine room and bridge. The survey also involves inspecting the ship's structural strength, watertight integrity, main machinery, ventilation systems, boilers, pressure vessels, electrical systems, and other key components to ensure safety.

Uploaded by

Visveswaran Inbasekaran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Preparations for Cargo Ship Safety

Construction Survey :

→ Check emergency towing


arrangements. → Inspect structural strength, peak
and machinery bulkheads, and stern
tubes.
→ Check anchors, anchor handling
equipments and chain cables.
→ Inspect watertight bulkheads,
decks and inner bottoms,
watertight decks, trunks, tunnels,
→ Inspect ballast and bilge
duct keels and ventilators.
pumping and drainage
arrangements.

Saf Con ( Cargo Ship → Inspect main machinery means of


→ Check communication between Safety Construction ) maneuvering and going astern.
engine room and bridge, engineer’s
alarm.
Certificate
→ Inspect ventilations systems in
machinery spaces, protection
against noise.
→ Check remote control of
propulsion machinery from bridge
and steering gear.
→ Inspect boilers and other
pressure vessels, boiler feed
systems, steam pipe systems, air
→ Inspect emergency source of
pressure systems, cooling water
power and emergency
systems.
switchboards, locations and
construction of cables and general
precaution against shock , fire and
other hazards. → Inspect electrical installations,
main source of electrical power and
main switchboard, lighting systems.

You might also like