STEEL SHOT AND GRIT
SIGMA WEAR PARTS (PTY)LTD
TO SAE J444, J827 & J1993 SPECIFICATIONS, Tel: +27 (0)11 823 4443 - Fax: +27(0)11 823 3555
e-Mail:
[email protected] 6 Field Road, Lilianton, Boksburg
AMS 2431/1C & 2C PEENING MEDIA Gauteng, South Africa.
GRANITE CUTTING MEDIA www.Sigmateamsa.com
QUALITY CONTROL PACKAGING
Our Products are produced in modern facilities in Europe, North America The following packaging formats are available:
and South Africa by a team with over 70 years combined abrasives manufacturing 25 Kilogram bags boxed and palletised up to 1000 kilograms.
experience. 220 litre steel drum palletised up to 909 kilograms steel shot.
All product is manufactured strictly to the SAE J444, J1993 and J827 220 litre steel drum palletised up to 750 kilograms steel grit.
specifications. Our laboratory is equipped with the most modern equipment Bulk bags palletised up to 1000 or 2000 kilograms.
and is able to conduct all quality testing to a high degree of efficiency and
accuracy. CUSTOMER SUPPORT
Sigma Wear Parts is also able to carry out abrasive applications testing in Sigma Wear Parts commitment to quality places our customers first.
our in-house test blasting facility. We reserve the right to modify our Our sales team has many years of abrasives experience and are able to
products in line with our policy of continuous improvement. give on the ground support and service as and when needed.
CHEMICAL ANALYSIS MICROSTRUCTURE GRANITE CUTTING
Uniform martensite tempered to a degree Our GC grit is specially
Carbon 0.80 - 1.2% consistent with the hardness range. Steel Grit manufactured from selected base
Silicon 0.40 - 1.5% HG > 61 HRC material to ensure the optimum
HARDNESS LG 54 — 61 HRC shape for granite cutting.
Manganese Steel Shot 41 — 51 HRC PG 47 — 56 HRC
S070 — S110 0.35 - 1.2% Other hardnesses available upon request. NG/SG 40 — 51 HRC Further more it is especially
S170 0.50 - 1.2% hardened and heat-treated to ensure
S230 — S660 0.60 - 1.2% DENSITY Other hardnesses available maximum cutting efficiency.
The specific density of cast steel shot shall upon request.
Other sizes available upon request.
SAE SCREEN SAE SCREEN GRANITE
STEEL SHOT STEEL GRIT CUTTING
SCREEN SIZE SCREEN SIZE
NUMBER MM S660 S550 S460 S390 S330 S280 S230 S170 S110 S070 NUMBER MM G12 G14 G16 G18 G25 G40 G50 G80 GC20 GC25
8 2.360 All Pass 8 2.360 All Pass
10 2.000 All Pass All Pass 10 2.000 All Pass
12 1.700 85% Min 5% Max All Pass 12 1.700 80% min All Pass
14 1.400 97% Min 85% Min 5% Max All Pass 14 1.400 90% Min 80% Min All Pass All Pass All Pass
16 1.180 97% Min 85% Min 5% Max All Pass 16 1.180 90% Min 75% Min All Pass 10% Max 10% Max
18 1.000 96% Min 85% Min 5% max All Pass 18 1.000 85% Min 75% Min All Pass 30-50% 30-50%
20 0.850 96% Min 85% Min 10%Max All Pass 20 0.850 90% Min 60% Min
25 0.710 96% Min 85% Min 10% Max 25 0.710 85% Min 70% Min All Pass 98% Min 85% Min
30 0.600 96% Min 85% Min All Pass 30 0.600
º 35 0.500 97%Min 10% Max 35 0.500
º 40 0.425 85% Min All Pass 40 0.425 80% Min 70% Min All Pass
45 0.355 97% Min 10% Max 45 0.355
50 0.300 80% Min 50 0.300 80% Min 65% Min
º 80 0.180 90% Min 80% Min 80 0.180 75% Min 65% Min
120 0.125 90% Min 120 0.125 75% Min
º
º
