Motorised Valves
290 SERIES
ASCO Numatics
2/2 Motorised valves - on/off
Easy to use and install
Installation
• Simple electrical connection via a connector ISO 4400 (M12 connector optional):
- 24 VDC or 110 to 250 VAC 50/60 Hz
- 24 to 48 VAC 50/60 Hz (contact us)
• Electrical supply - 2 wires (supply cable)
• 1 contact on/off - 1 wire
• Auto-adjustment and auto-initialisation from the first time it is powered up
Use
• 360° view of
the valve status
through LEDs
Valve open Valve closed Valve opening Valve closing
• Response time < 2 seconds / cycle
Reliable and robust
• Reliability of your process:
- Standard: valve position fixed on loss of power
- Optional: valve closes on loss of power
• Lifetime of more than 1 million cycles
using air or water as the process medium, operating at ambient temperature
and at a rate of 10 cycles / minute
• Degree of protection: IP65
Cost-effective
• Low energy consumption: 12 W during the opening and closing phase (1 cycle < 2 s) and 0 W when idle
Compact and light
• Compact: actuator 67 mm for 3 DN (10, 15 and 20 mm)
• Light: DC version = 0.550 kg
AC version = 0.650 kg
Environmentally friendly
• No exhaust air: works silently
• ASCO Numatics; ISO 14001 certified
Removable
connector
360° view with 3 LEDs
(valve status)
Control head made
Motor from robust transparent
polyamide enabling:
• easy location of the LEDs
• high resistance against
industrial pollutants and
ageing
36
0°
he
ad
o rien
tatio
n
AISI 303
Stuffing box made from
stainless steel shaft
(AISI 316L optional glass fibre-reinforced
for aggressive fluids*) thermoplastic polyester
resin (30%)
Valve body
Inclined seat
in AISI 316L
anti-water hammer
stainless steel
Valve plug integrated
with the stem to
eliminate retention
zones
NBR coating
on valve shutter Power converter
(FPM optional for box (AC)
aggressive fluids*)
Lipseal
* Subject to chemical compatibility with the fluid
Technical specifications
General specifications
Controlled fluids Water, air, oil, gas, filled fluids, viscous fluids
(max. viscosity 600 cSt)
Connection ISO 228/1 & ISO 7/1 (tapping combination) or NPT (on request)
DN 10 15 20
Differential pressure 0-6 bar 0-5 bar 0-4 bar
Maximum allowable pressure 10 bar 10 bar 10 bar
Kv 2.7 m3/h 3.8 m3/h 6 m3/h
Fluid temperature -10°C to +90°C
Ambient temperature -10°C to +50°C
Valve actuator 67 mm
Response time < 2 seconds/cycle
Recommended maximum usage cycle
Ambient temperature +20°C 9 cycles/min
Ambient temperature +50°C (max.) 4 cycles/min
Electrical specifications
Connector Removable (cable Ø 6-10 mm)
Connector compliance ISO 4400 / EN 175301-803, type A
Power consumption 12 W when running, 0 W when idle
Maximum inrush current: 0.7 A
View of valve (switching) LEDs
Electrical compliance (AC/DC adapter) IEC 335 (EN-IEC 60730), class 2
Electrical protection IP65 (EN 60529)
Standard voltages DC (=): 24 V ±10 %,
max. residual ripple 5%
(EN-IEC 61131-2) AC (~): 110 V to 250 V / 50-60 Hz (1)
(1) 24 V to 48 VAC /50-60 HZ, contact us.
Can be used in
• Car washes
• Hydrotherapy
• On-board equipment (agriculture, road-cleaning vehicles, buses, etc.)
• Oil cooling in wind-turbine transformers Option to control valve
• Water treatment (treatment tower - tank filling) using input/output modules
• Wine production (thermoregulation) and G3 electronic modules
• Industrial/domestic heating/cooling equipment
• Feeding processes
131292-356 04/2013
