Installation Instructions Bulletin 237053A
Revision C
Connectors
for HELIAX® HJ12-50 Coaxial Cable
3-1/8” EIA-flange,
gas-pass
4
3
7/8” EIA-flange
2
3-1/8” EIA-flange,
gas-block
1
Inches
100
90
1-5/8” EIA-flange
80
70
60
50
40
30
20
Millimeters
N-female
1 2
Cut cable end square. Trim cable jacket.
2”
(51 mm)
3
Add gasket, grease, and
clamping nut.
3/16”
(5 mm)
4
Remove burrs and
debris from conductors.
5 6
Cut outer conductor to Gently bend and flatten tabs.
form tabs.
3/16”
(5 mm)
7
Trim protruding tabs.
8
Screw stub into inner
conductor, cut 8 V-
notches, and reposition
stub.
9
Bend tabs into stub
slots and gently flatten
remaining tabs.
10 3-1/8” EIA-flange,
gas-block
9/16”wrench
72-108 lb•in
Outer
flare ring
Install inner connector, (8-12 N•m)
flare ring, and insulator.
Inner
Inner connector- flare
insulator assembly ring
5/8”wrench
72-108 lb•in 3-1/8” EIA-flange,
Flare ring
(8-12 N•m) gas-pass Insulator
Inner connector
7/16”wrench
64-96 lb•in 1-5/8” EIA-flange
(7-11 N•m)
Insulator
Flare ring
Inner connector
5/8”wrench
10 64-96 lb•in
(7-11 N•m)
7/8” EIA-flange
Insulator
Flare ring
Install inner connector,
flare ring, and insulator.
Inner connector
7/8”wrench Outer body
72-108 lb•in
N-female
(8-12 N•m)
Flare ring
Inner connector
11 12
Add O-ring, grease, and Tighten assembly.
outer body
3-1/8” EIA-flange
12
Tighten assembly.
36-54 lb•ft 36-54 lb•ft 32-48 lb•ft
(48-72 N•m) (48-72 N•m) (45-65 N•m)
1-5/8” EIA-flange 7/8” EIA-flange N-female
Notice: Andrew disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices.
Andrew Corporation Telephone: 708/349-3300 Customer Service, 24 hours: U.S.A. • Canada • Mexico: 1-800/255-1479
10500 West 153rd Street FAX (U.S.A.): 1-800-349-5444 U.K.: 0800 250055 • Republic of Ireland: 1 800 535358 Printed in U.S.A. 7/98
Orland Park, IL U.S.A. 60462 Internet: http://www.andrew.com Other Europe: +44 1592 782612 Copyright © 1998 by Andrew Corporation
