Scribd
Upload
74 views7 pages

Mini Project: Introduction To Manufacturing Engineering - Me2036

This document outlines the requirements for a mini project report on an introduction to manufacturing engineering. The report must have 5 parts: 1) introduce the product with basic dimensions and applications, 2) select material(s) and present properties, 3) select manufacturing processes and describe fabrication sequence, 4) select and describe heat treatment, 5) provide a conclusion. The report is due one week before the last class and must have a signed cover sheet. The mini project is worth 30% of the mid-term grade, which along with class participation and a mid-term test, make up 40% of the overall assessment for the course.

Uploaded by

Nguyễn Tiến Mạnh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views7 pages

Mini Project: Introduction To Manufacturing Engineering - Me2036

This document outlines the requirements for a mini project report on an introduction to manufacturing engineering. The report must have 5 parts: 1) introduce the product with basic dimensions and applications, 2) select material(s) and present properties, 3) select manufacturing processes and describe fabrication sequence, 4) select and describe heat treatment, 5) provide a conclusion. The report is due one week before the last class and must have a signed cover sheet. The mini project is worth 30% of the mid-term grade, which along with class participation and a mid-term test, make up 40% of the overall assessment for the course.

Uploaded by

Nguyễn Tiến Mạnh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

MINI PROJECT

INTRODUCTION TO MANUFACTURING ENGINEERING – ME2036

Content for the report


Part 1 - Introduce the product (at least 1 page): Characteristics and applications
of the product.
- Basic characteristics and applications of the product in practice;
- Select basic dimensions for the product: For example, basic dimensions
of an axis will be the diameter, length of the axes,...
Part 2 - Select the material(s) for the given product and present properties of
this/these material(s) (at least 2 page)
- Material: Metal or plastic material;
- Select specific material: For example, if it is steel, what type of steel,
grade of steel (symbol of steel);
- Introduce chemical, mechanical, physical properties, and chemical
components of the selected material.
Part 3 - Select manufacturing process(es) and describe fabrication sequence for
the given product (at least 2 page)
- Diagram of introducing the processing sequence;
- Description of machining sequence with illustrations.
Part 4 - Select and describe heat treatment process for the given product (at
least 1 page).
- Choice of heat treatment method;
- Presentation and description of the heat treatment process diagram.
Part 5 - Conclusion (at least 1 page)
- Present achieved results;
- Present comments.
Attention: Must be submitted the final report to the instructor of one week
before the last lesson. The final report assignments must have a completed
cover sheet signed and dated by hand.
Assessment:
1 – Mid-term grade (40%):
- Class participation: Regulations of HUST;
- Mid-term test (multichoice, 70%);
- Mini Project (30%):
2 – Final exam (multichoice) (60%).
No 1: Gear 1

No 2: Gear 2

No 3: Gear 3

No 4: Gear 4
No 5: Shaft 1

No 6: Shaft 2

No 7: Bolt-nut
No 8: Gear on the shaft (one piece)

No 9: Flange 1

No 10: Flange 2
No 11: Flange 3

No 12: Flange 4

No 13: Flange 5

No 14: Flange 6
No 15: Mold

No 16: Gear box 1

No 17: Gear box 2


No 18: I beam 1

No 19: I beam 2

No 20: box beam

You might also like