YİĞİTBAŞI SALT MACHINE
SANAYİ SİTESİ A2 BLOK NO:3 Ş.KOÇHİSAR/ANKARA
PHO:0 312 686 33 21
FAX: 0 312 686 33 24
60 TON/HOUR DRYING-WASHING-CYCLONE-SIEVE-PACKAGING
FACTORY TECHNICAL SPECIFICATIONS
A. DRYING UNİT
1.FLUİD BED DRYER
* Drying bottom body sheet shall be 8000 * 1400 * 12 mm.
* The width of the dryer shall be 1400 mm.
* Drying vibration motor will be 7.5 KW 1000 rpm.
* The dryer screen range is 1400 * 8000 * 0,25 mm and 316 quality chrome.
* Dryer, sieve support blades 10 * 40 mm 304 chrome llama will be.
* Spout mouth will be 1400 * 750 mm.
* Oven top body sheet will be 316 quality 3 mm chrome.
* Oven upper body supports shall be laid in 50 cm intervals from 10 * 40 mm plates.
1
2.SUCTION FAN
* Fan outlet port will be 1015 * 915 mm
* The frame will be 5 mm.
* Fan motor 55 KW will be 1500 rpm.
* Powder will suck from cyclone.
* Fan air pressure will be 64,000 m3.
* Fan inlet opening shall be 1150 mm
3.PRESSURE FAN
* Fan outlet port will be 1015 * 915 mm
* The frame will be 5 mm.
* Fan motor 55 KW will be 1500 rpm.
* Hot air will be pressed into the oven.
* Fan air pressure will be 64,000m3
* Fan inlet opening shall be 1150 mm
2
4 SHOCKING FAN
* Fan outlet port will be 500 * 510 mm
* The frame will be 5 mm.
* Fan motor 15 KW will be 1500 rpm.
* Cold air will be pressed into the oven.
* Fan air pressure will be 16,000 m3.
5.POWDER CYCLONE
* Powder cyclone will be 2750 mm in diameter.
* Length will be 6800 mm.
* 316 quality 3 mm will be made of chrome.
* Carrier feet will be manufactured from 200 * 200 * 4 mm box profile.
3
6. TERMOBLOK
* The outer body diameter of the thermoblock shall be 1800 mm.
* The diameter of the inner body of the thermoblock shall be 1000 mm.
* The outer body of the thermoblock shall be made of 4 mm sheet metal.
* Thermoblock inner body will be made of 316 quality chrome.
* The length of the thermoblock shall be 3000 mm.
7.CHIMNEY PIPES
* The diameter of the flue pipe shall be 630 mm.
* 3 mm 316 quality will be chrome.
* Chimney pipe dimensions will be produced according to the upper mouth parts of the
furnace.
* 3 exits.
4
B. WASHING UNIT
1.CENTRIFUGE
BIG BASKET DIAMETER 1200 MM
SMALL BASKET DIAMETER 700 MM
EXTERNAL BODY DIAMETER 1900 MM
CHASSIS 10 MM CHROME 316
ELECTRIC MOTOR 30 KW 1500 D/DK
BASKET TOUR 900 D/DK
EXTERNAL BODY DIAMETER 10 MM 316 CHROME
VİBRATION MOTOR 2.2 KW
PRODUCT INLET PIPE 214 LÜK 3 MM 316 CHROME
5
2.CONVEOR BELT
* Band length will be 15 meters
* Tape thickness will be 4 times 10 mm sergeant tape.
* Chassis profile will be 50 * 50 * 4 mm.
* Carrier drums will be 200 mm.
* Intermediate stations will have 3 groups of rolls on 80 NPU.
* Engine speed 7.5 KW will be 1400 rpm.
* Motor will be connected to the gearbox with pulley.
* Drum bearings will be UCP 210.
3. SPIRAL
* The length of the screw shall be 6000 mm.
* Spiral inner pipe diameter of 316 quality chrome 76 pipe will be made.
* Spiral inner pipe thickness will be 3 mm.
* Spiral outer pipe diameter will be 300 mm.
* Coil outer pipe thickness will be 3 mm.
* Helical motor 5.5 KW will be 63 rpm.
* Screw bearing system will be SN512.
6
4.CRUSHING MILL
* Body sheet will be 316 quality chrome nickel.
* Body dimension shall be 1000 * 1000 * 10 mm.
* Chassis 100 * 100 * 4 mm box to be made from profile.
* Crusher transmission will be made of 300 mm pipe.
* Crusher motor will be 30 KW 1400 rpm.
* On the transmission, the pulley 22 * 200 will be two rows.
7
C. CYCLONE UNİT
1. MIXER CYCLONE
* Cyclone diameter 1250 mm
* Cyclone overflow width 400 mm
* Cyclone Height 2500 mm
* Mixer motor 7.5 kw 40 rpm
* Cyclone feet 150 * 150 * 4 mm box profile
2.BIG CYCLONE
* Cyclone diameter 1250 mm
* Cyclone overflow width 400 mm
* Cyclone Height 2500 mm
* Cyclone feet 150 * 150 * 4 mm box profile
8
3. HYDRO CYCLONE
* Hydro cyclone diameter is 350 mm.
* Inlet port is 139 mm
* Outlet port is 139 mm.
4. LAPA POMP
* The capacity is 100 tons per hour.
* The engine is 22 KW 1400 rpm.
* Suction port 5 '' outlet port is 4 '' 100 mm.
9
5.STOCK SILOS
* Upper mouth will be 230 * 230 cm.
* Side support brackets will be 70 angle bracket.
* Carrier feet 100 * 100 mm box to be made from the profile.
* Length of support legs will be 300 mm
* Lower mouth will be mechanical sliding cover.
* Bunker sheet will be 316 quality 2 mm stainless steel sheet.
10
D. SIEVE, PACKAGING AND STORAGE UNIT
1. SPIRAL
* The length of the screw shall be 6000 mm.
* Spiral inner pipe diameter of 316 quality chrome 76 pipe will be made.
* Spiral inner pipe thickness will be 3 mm.
* Spiral outer pipe diameter will be 300 mm.
* Coil outer pipe thickness will be 3 mm.
* Helical motor 5.5 KW will be 63 rpm.
* Screw bearing system will be SN512.
2. ELEVATOR
* Elevator round trip directions are 520x280 mm.
* Elevator bucket thickness will be 3 mm.
* Elevaötr will take 3 buckets in 1 meter.
* Elevator tape thickness will be 4 times 10 mm.
* Elevator motor 7.5 KW will be 36 RPM.
* 480 mm from the elevator drum.
* Elevator length will be 15000 mm.
* Length 20 meters.
11
3. SIEVE
* Sieve length is 6000 mm.
* Screen width is 2350 mm.
* Screen height is 1900 mm.
* The sieve diameter is 1600 mm and the length is 6000 mm.
* Sieve all 5 class will parse.
* Sieve engine speed will be 7.5 KW 40 rpm.
4. PACKAGING MACHINE
* The sacking machine shall be a duble shroud.
* Bagged single converger feed chopper and cutter valves are available.
* PLC works with automatic weight system.
* There is a tonnage between 10-16 sacks according to worker productivity.
12
5. STORAGE SILOS
* Silo diameter will be 2150 mm.
* Silo sheet thickness will be 3 mm.
* Silo length will be 6500 mm.
* Platform will be 200x200x7 mm box profile.
* Platform height to be made according to silo size.
* Platform width will be made according to silo width.
13
