Scribd
Upload
65 views1 page

Tekncoat - Technical - Data (1) - 017

Teknplus Super is a two-part epoxy adhesive available in grey and blue colors. It has a mix ratio of 1:1 for parts A and B. Once mixed, it has a gel time of 7-10 seconds and tack free time of 12-17 seconds. It fully cures within 1 hour. It has high elongation, hardness, adhesion strength, and tensile strength. It also has good resistance to chemicals like acids, bases, gasoline and more.

Uploaded by

aboali8686
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views1 page

Tekncoat - Technical - Data (1) - 017

Teknplus Super is a two-part epoxy adhesive available in grey and blue colors. It has a mix ratio of 1:1 for parts A and B. Once mixed, it has a gel time of 7-10 seconds and tack free time of 12-17 seconds. It fully cures within 1 hour. It has high elongation, hardness, adhesion strength, and tensile strength. It also has good resistance to chemicals like acids, bases, gasoline and more.

Uploaded by

aboali8686
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data

TEKNPLUS SUPER
Technical data:

Colors : Grey, blue


Solid Content : 100 %
Specific Gravity : Part A 1.10, Part B 1.02
Viscosity A Component @25 0C (cps) : 1800
Viscosity B Component @25 0C (cps) : 185
Mix Ratio : Part A: Part B 1:1
Gel time : 7 to 10 secs.
Tack free time : 12 to 17 secs.
Full cure : 1 hour
Elongation (DIN 53504) : 160- 420 %
Shore hardness (DIN 53505) : A 92
Adhesion Strength : > 1.5 N/mm 2
Tensile Strength(DIN 53504) : 65 N/mm 2
Abrasion (DIN 53516) : 125 - 160 mm 3
Angle tear ( D53515 ) : 22.7
Trouser tear ( D 53507 ) : 5.5
Shelf Life : 1 year (unopened
condition not exposed to sun )

Note: Properties can be varied for specific requirement varying the formulations

Chemical Resistance ASTM D 3912

Methanol D Sulfuric acid 5 % A


Gasoline C Sulfuric acid 10 % A
Diesel Fuel A Hydrochloric acid 5 % A
Toluene E Hydrochloric acid 10 % A
MTBE B Phosphoric acid 10 % A
5 % MTBE /gasoline B Ammonium hydroxide 10 % A
Motor Oil C Ammonium hydroxide 20 % A
Hydraulic fluid A Sodium hydroxide 10 % A
2-methylbutane A Sodium hydroxide 20 % A
Water/room temperature A Sodium hydroxide 50 % C
Water/ 82 0C, 14 days A Sodium Hydroxide / 1 %, 50 0C, 14 C
days
10 % NaCL/water/room temp A Potassium Hydroxide 10 % A
10 % NaCL/water/50 0C, 14 A Potassium Hydroxide 20 % C
days
10 % Sugar /water A Acetic Acid /10% A

A No Visible damage
B Slight surface damage
C Slight surface discolor, no hardness loss
D Swelling, <48 hrs
E Swelling, <24 hrs

Page 2

You might also like