Data Sheet
1130 Differential Pressure Gauge
FEATURES
High static pressure capabilty (up to 6,000 psi)
Ranges from 5 psi to 150 psi
Reed switches optional for direct system control
Superior magnets for smoother pointer motion
Buna-N O-rings (others available)
Piston actuator
Dry or liquid filled case
TYPICAL USES
Filtration monitoring
Hydraulics
Flow rate 1130
2˝, 2½˝, 3½˝, 4˝, 4½˝, 6˝ dial sizes
Pump performance
Measuring Pressure Drop
SPECIFICATIONS KEY BENEFITS
Accuracy: ±2% ascending pressure full scale differential
• Recommended for high differential and high
Sizes: 2˝, 2 ½˝, 3 ½˝, 4˝, 4 ½˝, 6˝ static pressure
Ranges: 0-5 psi to 150 psi • Low Cost
Process Connection Lower, back, in-line
Location:
• Stainless steel Case
Process Connection ¼ NPT Female (STD.), 1⁄8 NPT or ½ NPT Female • Switch outputs available
Size: Adapters (OPT.) • 5 year warranty
Migration: Minor migration of process media
Weather Protection: IP65
Maximum Process
175°F (80°C)
Temperature:
RATINGS FOR STANDARD REED SWITCHES
Maximum Static 3,000 psi (6,000 psi for Stainless steel)
Pressure: Switches Contact Rating Current Voltage
WETTED COMPONENTS
Actuator O-Rings/DiaphragmBody Material 10 VA ac (rms) or 0.5 Amp ac (rms) or 100 Vac/Vdc
SPST
dc (Max.) dc (Max.) (Max.)
Aluminum, brass or
Piston Buna-N 3 VA ac (rms) or 0.3 AMP ac (rms) or 30 Vac/Vdc
stainless steel SPDT
dc (Max.) dc (Max.) (Max.)
Ceramic magnet & SS spring are also wetted components
NON-WETTED COMPONENTS
Case Material Window
Glass (STD.), safety glass or plastic
Stainless steel
(OPT.)
1 of 3
All specifications are subject to change without notice. ashcroft.com
All sales subject to standard terms and conditions.
[email protected]©2018 Ashcroft Inc. 1130_gauge_ds_RevB_Ltr_07-29-19 1.800.328.8258
Data Sheet
1130 Differential Pressure Gauge
ORDERING CODE Example: 20 1130 A D 25 S XV1 5#
Size
20 - 2˝ 20
25 - 21/2˝
35 - 31/2˝
40 - 4˝
45 - 41/2˝
60 - 6˝
Series
1130 - Piston Actuated 1130
Body Material
A - Brass A
F - Aluminum
S - Stainless steel
Case Fill
D - Dry D
L - Glycerin fill (Liquid fill has an effect on accuracy that varies with range and temperature.)
Process Connection Size
25 - 1/4 NPT Female 25
Process Connection Location
S - In-Line S
L - Lower
B - Back
Options (If choosing an option(s) must include an “X”) X__
BF - Surface mounting plate
CS - Dual scale
DD - Color band (any combination of green, yellow, red)
GE - 1/8 NPT Female adapters
GM - 1/2 NPT Female adapters
EP - Maximum pointer (N/A on 2˝ case)
FF - Front flange
VD - Viton® O-rings
EM - EPDM O-rings
GV - Silicone fill (Silicone liquid fill is recommended for outside applications even though unit is hermetically sealed.)
PD - Plastic window
RP - Reverse porting
SG - Safety glass (N/A on 2˝ or 21/2˝ case)
TM - Pipe mounting bracket (In-line only)
V1 - 1-SPST switch w/DIN plug (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%) V1
V2 - 1-SPST switch w/terminal strip (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%)
V3 - 2-SPST switch w/DIN plug (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%)
V4 - 2-SPST switch w/terminal strip (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%)
V5 - 1-SPDT switch w/DIN plug (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%)
V6 - 1-SPDT switch w/terminal strip (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%)
V7 - 2-SPDT switch w/DIN plug (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%)
V8 - 2-SPDT switch w/terminal strip (N/A with back connection) (Adj. 20-100% of range, Preset @ 90%)
Range (coding examples only, see range table on page 3 for all standard ranges.)
5# - 5 psi 5#
2 of 3
All specifications are subject to change without notice. ashcroft.com
All sales subject to standard terms and conditions.
[email protected]©2018 Ashcroft Inc. 1130_gauge_ds_RevB_Ltr_07-29-19 1.800.328.8258
Data Sheet
1130 Differential Pressure Gauge
1130- Single Scale
psid kg/cm2 bar kPa
- 0.25KSC 0.25BR 25KPa
5# - - -
8# 0.5KSC 0.5BR 50KPa
10# 0.75KSC 0.75BR 75KPa
15# 1KSC 1BR 100KPa
20# - - -
25# 1.6KSC 1.6BR 160KPa
30# 2KSC 2BR 200KPa
- 2.5KSC 2.5BR 250KPa
40# 3KSC 3BR 300KPa
50# - - -
60# 4KSC 4BR 400KPa
- 5KSC 5BR 500KPa
80# - - -
- 6KSC 6BR 600KPa
100# 7KSC 7BR 700KPa
- 9KSC 9BR 900KPa
150# 10KSC 10BR 1,000KPa
DIMENSIONS
For reference only, consult Ashcroft for specific dimensional drawings.
FLANGED CASE
.75 SQ. REGULAR CASE 0.162˝
2 PLACES
¼ NPT FEMALE 3 PLACES
D2
2 PLACES
∞
120
D
D
2˝
A
0.5 A ¼˝-20
BOLT
2 PLACES 1.81˝ CIRCLE D1
B B 4˝
Dial Size Dimensions
Inches A B D D1 D2 Bolt Circle
2" 0.70˝ 1.70˝ 2.08˝ 3.11˝ 2.04˝ 2.72˝
2.5" 0.75˝ 1.75˝ 2.59˝ 3.66˝ 2.55˝ 3.26˝
3.5" 0.75˝ 1.75˝ 3.26˝ 4.29˝ 3.22˝ 3.86˝
4" 0.75˝ 1.75˝ 4.10˝ 5.15˝ 4.01˝ 4.76˝
4.5" 0.75˝ 1.75˝ 4.71˝ 5.74˝ 4.60˝ 5.35˝
6" 0.75˝ 1.75˝ 6.07˝ 7.12˝ 6.00˝ 6.73˝
3 of 3
All specifications are subject to change without notice. ashcroft.com
All sales subject to standard terms and conditions.
[email protected]©2018 Ashcroft Inc. 1130_gauge_ds_RevB_Ltr_07-29-19 1.800.328.8258
