NEW SYLLABI FOR THE CURRICULAM

OF UG COURSE
(B.TECH. in MECHANICAL ENGINEERING)

HEAD OF THE DEPARTMENT

DEPARTMENT OF MECHANICAL ENGINEERING
REVISED DURING 2018
 COMMON FIRST YEAR COURSES (2017-18)

FIRST SEMESTER

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
MAC Mathematics - I PCR 2 1 0 3 3
01

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))
Basic concepts of CT+EA
function, limit,
differentiation and
integration.
Course  CO1: Fundamentals of Differential Calculus
Outcomes  CO2: Fundamentals of Integral Calculus
 CO3: Fundamentals of Vector Calculus
 CO4: Basic Concepts of Convergence
Topics Functions of Single Variable: Rolle’s Theorem and Lagrange’s Mean
Covered Value Theorem (MVT), Cauchy's MVT, Taylor’s and Maclaurin’s series,
Asymptotes & Curvature (Cartesian, Polar form). (8)

Functions of several variables: Function of two variables, Limit,

Continuity and Differentiability, Partial derivatives, Partial derivatives
of implicit function, Homogeneous function, Euler’s theorem and its
converse, Exact differential, Jacobian, Taylor's & Maclaurin's series,
Maxima and Minima, Necessary and sufficient condition for maxima
and minima (no proof), Stationary points, Lagrange’s method of
multipliers. (10)

Sequences and Series: Sequences, Limit of a Sequence and its

properties, Series of positive terms, Necessary condition for
convergence, Comparison test, D Alembert’s ratio test, Cauchy’s root
test, Alternating series, Leibnitz’s rule, Absolute and conditional
convergence. (6)

Integral Calculus: Mean value theorems of integral calculus,

Improper integral and it classifications, Beta and Gamma functions,
Area and length in Cartesian and polar co-ordinates, Volume and
surface area of solids of revolution in Cartesian and polar forms, (12)

Multiple Integrals: Double integrals, Evaluation of double integrals,

Evaluation of triple integrals, Change of order of integration, Change
of variables, Area and volume by double integration, Volume as a triple
integral. (10)

Vector Calculus: Vector valued functions and its differentiability, Line

integral, Surface integral, Volume integral, Gradient, Curl, Divergence,
Green’s theorem in the plane (including vector form), Stokes’ theorem,

Syllabus for B Tech in Mechanical Engineering

1
 Gauss’s divergence theorem and their applications. (10)

Text Text Books:

Books, 1. E. Kreyszig, Advanced Engineering Mathematics: 10 th edition,
and/or Wiley India Edition.
reference 2. Daniel A. Murray, Differential and Integral Calculus, Fb & c Limited,
material 2018.
3. Marsden, J. E; Tromba, A. J.; Weinstein: Basic Multivariable
Calculus, Springer, 2013.
Reference Books:
1. Tom Apostal, Calculus-Vol-I & II, Wiley Student Edition, 2011.
2. Thomas and Finny: Calculus and Analytic Geometry, 11 th Edition,
Addison Wesley.

Course Title of the Program Total Number of contact hours Credi

Code course Core (PCR) / Lectu Tutori Practic Total t
Electives re (L) al (T) al (P) Hour
(PEL) s
PHC01 PHYSICS PCR 2 1 0 3 3

Pre-requisites: Course Assessment methods: (Continuous (CT), MID term and

End Term Assessment (EA))
NIL CT+EA
Course CO1: To realize and apply the fundamental concepts of physics such as
Outcomes superposition principle, simple harmonic motion to real world problems.
CO2: Learn about the quantum phenomenon of subatomic particles and its
applications to the practical field.
CO3: Gain an integrative overview and applications of fundamental optical
phenomena such as interference, diffraction and polarization.
CO4: Acquire basic knowledge related to the working mechanism of lasers and
signal propagation through optical fibers.
Topics Harmonic Oscillations - Linear superposition principle, Superposition of two
Covered perpendicular oscillations having same and different frequencies and phases,
Free, Damped and forced vibrations, Equation of motion, Amplitude resonance,
Velocity resonance, Quality factor, sharpness of resonance, etc. [8]
Wave Motion - Wave equation, Longitudinal waves, Transverse waves, Electro-
magnetic waves. [3]
Introductory Quantum Mechanics - Inadequacy of classical mechanics,
Blackbody radiation, Planck’s quantum hypothesis, de Broglie’s hypothesis,
Heisenberg’s uncertainty principle and applications, Schrodinger’s wave
equation and applications to simple problems: Particle in a one-dimensional box,
Simple harmonic oscillator, Tunnelling effect. [8]
Interference & Diffraction - Huygens’ principle, Young’s experiment,
Superposition of waves, Conditions of sustained Interference, Concepts of
coherent sources, Interference by division of wavefront, Interference by division
of amplitude with examples, The Michelson interferometer and some problems;
Fraunhofer diffraction, Single slit, Multiple slits, Resolving power of grating.
[13]
Polarisation - Polarisation, Qualitative discussion on Plane, Circularly and
elliptically polarized light, Malus law, Brewster’s law, Double refraction
(birefringence) - Ordinary and extra-ordinary rays, Optic axis etc.; Polaroid,
Nicol prism, Retardation plates and analysis of polarized lights. [5]
Laser and Optical Fiber - Spontaneous and stimulated emission of radiation,
Population inversion, Einstein’s A & B co-efficient, Optical resonator and
pumping methods, He-Ne laser. Optical Fibre– Core and cladding, Total internal
reflection, Calculation of numerical aperture and acceptance angle,
Syllabus for B Tech in Mechanical Engineering
2
 Applications. [5]
Text TEXT BOOKS:
Books, 1. The Physics of Vibrations and Waves, H. John Pain, Willy and Sons
and/or 2. Vibrations and Waves in Physics, Iain G. Main, Cambridge University Press
referenc 3. Engineering Physics, H. K. Malik and A. K. Singh, McGraw-Hill.
e REFERENCE BOOKS:
material 1. Quantum Physics, R. Eisberg and R. Resnick, John Wiley and Sons
2. Fundamental of Optics, Jankins and White, McGraw-Hill
3. Optics, A. K. Ghatak, Tata McGraw-Hill
4. Waves and Oscillations, N. K. Bajaj, Tata McGraw-Hill
5. Lasers and Non-linear Optics, B. B. Laud , New Age International Pvt Lt

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
CYC Engineering PCR 2 1 0 3 3
01 Chemistry
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
None CT+EA
Course CO1: Introduced to chemical thermodynamics, kinetics,
Outcomes electrochemistry, absorption and catalytic processes for
engineering applications
CO2: To learn fundamentals of polymer chemistry and petroleum
engineering.
CO3: Introduced to basic spectroscopic techniques for structure
determination and characterization.
CO4: To study few inorganic and bioinorganic compounds of industrial
importance.

Topics ORGANIC CHEMISTRY

Covered i. Fundamentals of organic reaction mechanisms; Few important
reactions and their mechanism along with their applications;
Robinson annulation, Hydroboration reaction, Organometallic
reagents (Gilman reagents), Metathesis using Grubb’s catalyst
and Wittig reaction. (3)
ii. Fundamental concept on stereochemistry and application:
Conformation and configuration of organic compounds,
Diastereo-selective, enantio-selective, regio-selective, stereo-
specific and stereo-selective reactions. (3)
iii. Polymer chemistry and polymer engineering: Fundamental
concept on polymer chemistry; synthesis and application of
important polymers, Rubber and plastic materials. Conducting
polymer. (2)
iv. Petroleum Engineering and oil refinery: origin of mineral oils,
separation principle and techniques of distillation of crude oil,
Uses of different fractions, octane number, cetane number,
Knocking, anti-knock compounds, and Bio-Fuel. (2)
v. Structure elucidation of organic compounds by modern
spectroscopic methods; Application of UV-Visible and FT-IR
spectroscopy. (3)

Syllabus for B Tech in Mechanical Engineering

3
 INORGANIC CHEMISTRY
i. Coordination Chemistry: Crystal Field Theory of octahedral
and tetrahedral complexes, colour and magnetic properties, Jahn-
Teller distortion, pseudo Jahn-Teller distortion, Isomerism and
stereochemistry.(5)
ii. Bioinorganic Chemistry: Heme and non-heme O2 transport
protein (Haemoglobin, Myoglobin), Chlorophyll and
photosynthesis. (3)
iii. Inorganic Materials: Introduction towards industrially
important inorganic materials like cementing material, refractory
material, fertiliser, inorganic polymer. (2)
iv. Organometallic Chemistry: π-acid ligands, stabilization of
metal low oxidation state and 18 electron rules, metal carbonyls
and nitrosyls, metal-alkene complexes. (4)
PHYSICAL CHEMISTRY
i. Thermodynamics: 2nd law of thermodynamics, entropy, free
energy, Gibbs Helmholtz equation, change of phase. Cryogenics:
joule Thomson experiment. (4)
ii. Chemical Kinetics: 2nd and 3rd order rate expression,
Reversible reaction, Chain reaction, Consecutive reaction, Temp
effect on reaction rate. (4)
iii. Electrochemistry: Electrochemical cell, Effect of pH,
precipitation and complex formation on EMF of
oxidation/reduction processes. (2)
iv. Absorption: Physical and Chemical absorption, Absorption
isotherms. (1)
v. Catalysis: Types of catalysis, Rate expression for Catalysed
reaction, Acid-base and Enzyme catalysis. (2)

Text Suggested Text Books:

Books, (i) Physical Chemistry by P. Atkins, Oxford
and/or (ii) A guidebook to mechanism in Organic chemistry: Peter Sykes;
reference Pearson Edu.
material (iii) Inorganic Chemistry Part-I & II, R. L. Dutta, The new book stall
Suggested Reference Books:
Organic Chemistry:
(i) Basic stereochemistry of organic molecules: S. Sengupta; Oxford
University press
(ii) Engineering Chemistry: Wiley
(iii) Elementary Organic Spectroscopy: William Kemp, ELBS with
Macmillan
Inorganic Chemistry:
(i) Inorganic Chemistry: Principle structure and reactivity, J. E.
Huheey, E. A. Keiter and R. L. Keiter, Pearson Education
(ii) Bioinorganic Chemistry -- Inorganic Elements in the Chemistry of
Life: An Introductionand Guide, 2nd Edition, Wolfgang Kaim, Brigitte
Schwederski, Axel Klein.
(iii) Inorganic Chemistry Fourth Edition, Shriver & Atkins, Oxford
Physical Chemistry:
(i) Physical Chemistry by G.W Castellan
(ii) Physical Chemistry by P. C. Rakshit

Syllabus for B Tech in Mechanical Engineering

4
Course Title of the Program Total Number of contact hours Credit
Code course Core Lectur Tutori Practic Total
(PCR) / e (L) al (T) al (P)# Hour
Electives s
(PEL)
XEC0 Engineering PCR 2 1 0 3 3
1 Mechanics

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))
CT+EA
Course CO1: Improves the knowledge of mechanics and ability to draw free
Outcomes body diagrams.
CO2: Imparts knowledge on application of mechanics for special
problems like truss and frame analysis.
CO3: Builds up ability to calculate centroid and moments of inertia for
various shapes and its application thereof.
CO4: Enhances the idea on dynamics with different engineering
applications using momentum and energy principles.
CO5: Introduces with Virtual Work Principle and its simple application.
CO6: Prepares the prerequisites for studying the subject Strength of
Materials / Solid Mechanics.
Topics Engineering Mechanics; measurement and SI units. [1]
Covered
Vectors and force as a vector; Resultant of a system of forces on a
particle; free body diagram and conditions of equilibrium of a particle;
problems on particles; equilibrium of particles in space. [2]

Resultant of a system of forces and couples on a rigid body; conditions

of equilibrium of a rigid body; free body diagrams of rigid bodies
subjected to different types of constraints; simple space problems of
rigid bodies. [4]

Coefficients of static and kinetic friction; problems involving friction;

theories of friction on square threaded power screw and flat belt. [5]

Simple trusses; analysis of trusses by method of joints and method of

sections. [5]

Centre of gravity and centre of mass; centroids of lines, curves and

areas; first moment of area; second moment of area; polar moment of
inertia; radius of gyration of an area; parallel axis theorem; mass
moment of inertia. [4]

Path, velocity, acceleration; rectilinear and curvilinear motion; motion

of system of particles; introduction to the concept of plane kinematics
of rigid bodies. [6]

Newton's second law of motion; dynamic equilibrium and D'Alembert's

principle; linear momentum; angular momentum; rectilinear and
curvilinear motion; principles of work–energy and impulse–momentum;
impact of system of particles; introduction to the concept of plane
Syllabus for B Tech in Mechanical Engineering
5
 kinetics of rigid bodies. [12]

Principle of Virtual Work, Solution of Problems on Mechanics using

Principle of Virtual Work [3]

Text 1. S P Timoshenko and D H Young, Engineering Mechanics, 5 th

Books, Edition
and/or 2. J L Meriam and L G Kraige, Engineering Mechanics, 5 th Edition,
reference
Wiley India
material
3. F P Beer and E R Johnston, Vector Mechanics for Engineers
4. I H Shames, Engineering Mechanics

Course Title of the Program Total Number of contact hours Credit

Code course Core Lectur Tutori Practic Total
(PCR) / e (L) al (T) al (P)# Hour
Electives s
(PEL)
ESC0 Environment PCR 2 0 0 2 2
1 al Science

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))
CT+EA
Course CO1 Understand the importance of environment and ecosystem.
Outcomes CO2 Understand the fundamental aspect of pollutant tracking and its
implementation in natural and anthropogenic pollution of air and
water system.
CO3 Understand the scientific basis of local and as well as global
issues.
CO4 Apply of knowledge to develop sustainable solution.
Topics Introduction: Multidisciplinary nature of Environmental Studies; Basic
Covered issues in Environmental Studies. [2]
Human population and the Environment. [1]
Social issues and the Environment. [1]
Constituents of our Environment & the Natural Resources:
Atmosphere– its layers, their characters; Global warming, Ozone
depletion, Acid rain, etc. [5]
Hydrosphere - Its constituents, Oceans, Groundwater, Surface waters;
Hydrological cycle. [4]
Lithosphere - constituents of lithosphere; Rock and Mineral resources;
Plate Tectonic Concept and its importance. [5]
Biosphere – its components; Ecosystems and Ecology; Biodiversity;
Biomes. [5]
Natural disaster and their management – Earthquakes, Floods,
Landslides, Cyclones. [3]
Pollution: Pollutants and their role in air and water pollution. [2]

Text 1. Environmental Studies – Benny Joseph – Tata McgrawHill-2005

Books, 2.Environmental Studies – Dr. D.L. Manjunath, Pearson Education-
Syllabus for B Tech in Mechanical Engineering
6
and/or 2006.
reference 3.Principles of Environmental Science and Engineering – P. Venugoplan
material Rao, Prentice Hall of India.
4.Environmental Science and Engineering – Meenakshi, Prentice Hall
India.
5.Environmental studies – R. Rajagopalan – Oxford Publication - 2005.
6.Text book of Environmental Science & Technology – M. Anji Reddy –
BS Publication..

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / it
Lectur Tutori Practic Total
Electives
e (L) al (T) al (P) Hour
(PEL)
s

BTC0 Life Science PCR 2 0 0 2 2

1

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))

CT+EA

Course CO1: To be familiarized with the basic cellular organization of

Outcomes organisms and cellular communications.
CO2: To impart an understanding about the basic structure and
functions of the macromolecules and their biosynthesis and
catabolism.
CO3: To give an understanding of the key features of the structure,
growth, physiology and behavior of bacteria, viruses, fungi and
protozoa
CO4: To introduce molecular biology to understand biological processes
in various applications.
CO5: To provide a foundation in immunological processes and an
overview of the interaction between the immune system and
pathogens.
CO6: To provide knowledge about biological and biochemical processes
that require engineering expertise to solve them

Topics 1. Cell Biology (4)

Covered
a) Introduction to life science: prokaryotes & eukaryotes
Definition; Difference
b) Introduction to cells
Define cell, different types of cell

c) Cellular organelles
All organelles and functions in brief
d) Cellular communications
Introduction to basic signaling; endocrine, paracrine signaling;
Syllabus for B Tech in Mechanical Engineering
7
 concepts of receptor, ligand, on-off switch by
phosphorylation/dephosphorylation

2. Biochemistry (4)

a) Biological function of carbohydrate and lipid

Introduction, structure and function
b) Biological function of nucleic acids and protein
Introduction, structure and function
c) Catabolic pathways of Macromolecules
Introduction to catabolism, hydrolysis and condensation
reactions; Catabolism of glucose- Glycolysis, TCA; overall
degradation of proteins and lipids
d) Biosynthesis of Macromolecules
Generation of ATP (ETS), Generation of Glucose (Photosynthesis)

3. Microbiology (5)

a) Types of microorganisms and their general features

Bacteria, Yeast, Fungi, Virus, Protozoa- general introduction with
practical significance and diseases
b) Microbial cell organization
Internal and External features of cell- bacterial cell wall, viral
capsule, pilus etc,
c) Microbial nutritional requirements and growth
Different Sources of energy; growth curve
d) Basic microbial metabolism
Fermentation, Respiration, Sulfur, N2 cycle

4. Immunology (5)

a) Basic concept of innate and adaptive immunity

Immunity-innate and adaptive, differences, components of the
immune system
b) Antigen and antibody interaction
Antigen and antibody, immunogen, factors affecting
immunogenicity, basic antigen-antibody mediated assays,
introduction to monoclonal antibody
c) Functions of B cell
B cell, antibody production, memory generation and principle of
vaccination
d) Role of T cell in cell-mediated immunity
Th and Tc, functions of the T cell with respect to different
pathogen and cancer cell

5. Molecular Biology (5)

a) Prokaryotic Genomes (Genome organization & structure)

Nucleoid, circular or linear
b) Eukaryotic Genomes (Genome organization & structure)

Syllabus for B Tech in Mechanical Engineering

8
 Intron, exon, packaging, chromatin
c) Central Dogma (Replication, Transcription and Translation)
d) Applications of Molecular Biology (Diagnostics, DNA-
fingerprinting, Recombinant products etc.)
Introduction to Recombinant DNA, fingerprinting, cloning

6. Bioprocess Development (5)

a) Microbial growth kinetics

Batch, fed-batch and continuous systems, Monod Equation
b) Enzyme kinetics, including kinetics of enzyme inhibition and
deactivation
Definition of enzymes, activation energy, Concepts of Km, Vmax,
Ki
c) Microbial sterilization techniques and kinetics
Introduction to sterilization, dry and moist sterilization
d) Thermodynamics of biological system
Concepts of Enthalpy, Entropy, favorable reactions, exergonic
and endergonic reactions
e) Material and energy balance for biological reactions
Stoichiometry

Text 1. Biotechnology 01 Edition, authored by U. Satyanarayana, Publisher:

Books, BOOKS & ALLIED (P) LTD.-KOLKATA
and/or 2. Biochemistry by Lehninger. McMillan publishers
reference 3. Microbiology by Pelczar, Chan and Krieg, Tata McGraw Hill
material 4. Brown, T.A., Genetics a Molecular Approach, 4th Ed. Chapman and
Hall, 1992
5. Kuby J, Thomas J. Kindt, Barbara, A. Osborne Immunology, 6th
Edition, Freeman, 2002.
6. Bioprocess Engineering: Basic Concepts (2nd Edition), Shuler and
Kargi, Prentice Hall International.

Cours Title of the Program Total Number of contact hours Cred

e course Core (PCR) Lectu Tutori Practic Tota it
Code / Electives re (L) al (T) al (P)# l
(PEL) Hou
rs
PHS5 Physics PCR 0 0 2 2 1
1 Laboratory
Pre-requisites Course Assessment methods: (Continuous evaluation (CE)
and end assessment (EA))
NIL CE+EA

Course  CO1: To realize and apply different techniques for measuring

Outcome refractive indices of different materials.
s  CO2: To realize different types of waveforms in electrical signals
using CRO.
 CO3: To understand charging and discharging mechanism of a
capacitor.
 CO4: To understand interference, diffraction and polarization

Syllabus for B Tech in Mechanical Engineering

9
 related optical phenomena.
 CO5: To acquire basic knowledge of light propagation through
fibers.
Topics 1. Find the refractive index of a liquid by a travelling microscope.
Covered 2. Determine the refractive index of the material of prism using
spectrometer.
3. Determination of amplitude and frequency of electrical signals by
oscilloscope.
4. To study the characteristics of RC circuits.
5. To study Brewster’s law/Malus’ law using laser light.
6. To study the diffraction of light by a grating.
7. To study the interference of light by Newton’s ring apparatus.
8. To determine numerical aperture of optical fiber.
9. Determination of Planck constant.

Text SUGGESTED BOOKS:

Books, 1) A Text Book on Practical Physics – K. G. Majumdar.
and/or 2) Practical Physics – Worsnop and Flint
reference REFERENCE:
material 1) Instruction sheets

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectur Tutori Practic Total it
Electives e (L) al (T) al (P) Hour
(PEL) s
CYS51 Chemistry PCR 0 0 2 2 1
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
None CT+EA
Course CO1: To learn basic analytical techniques useful for engineering
Outcomes applications.
CO2: Synthesis and characterization methods of few organic,
inorganic and polymer compounds of industrial importance.
CO3: Learn chromatographic separation methods.
CO4: Applications of spectroscopic measurements.

Topics i. Experiments based on pH metry: Determination of dissociation

Covered constant of weak acids by pH meter.
ii. Experiments based on conductivity measurement: Determination of
amount of HCl by conductometric titration with NaOH.
iii. Estimation of metal ion: Estimation of Fe2+ by permangnomentry
iv. Estimation of metal ion: Determination of total hardness of water by
EDTA titration.
v. Synthesis and characterization of inorganic complexes: e. g.
Mn(acac)3, Fe(acac)3, cis-bis(glycinato)copper(II) monohydrate and
their characterization by m. p. , FTIR etc.
vi. Synthesis and characterization of organic compounds: e.g.

Syllabus for B Tech in Mechanical Engineering

10
 Dibenzylideneacetone.
vii. Synthesis of polymer: polymethylmethacrylate
viii. Verification of Beer-Lamberts law and determination of amount of
iron present in a supplied solution.
ix. Chromatography: Separation of two amino acids by paper
chromatography
x. Determination of saponification value of fat/ vegetable oil
Text Suggested Text Books:
Books, 1. Vogel's Quantitative Chemical Analysis (6th Edition) Prentice Hall
and/or 2. Advanced Physical Chemistry Experiments: By Gurtu & Gurtu
reference 3. Comprehensive Practical Organic Chemistry: Qualitative Analysis By
material V. K. Ahluwalia and S. Dhingra
Suggested Reference Books:
1. Practical Chemistry By R.C. Bhattacharya
2. Selected experiments in Physical Chemistry By N. G. Mukherjee

Cours Title of the Program Total Number of contact hours Credi

e course Core Lectur Tutori Practic Total t
Code (PCR) / e (L) al (T) al (P)# Hour
Electives s
(PEL)
WSS5 Workshop PCR 0 0 3 3 1
1 Practice
Pre-requisites Course Assessment methods: (Continuous evaluation (CE)
and end assessment (EA))
NIL CE+EA

Course CO1: Study and practice on machine tools and their operations
Outcome CO2: Practice on manufacturing of components using workshop
s trades including fitting, carpentry, foundry and welding
CO3: Identify and apply suitable tools for machining processes
including turning, facing, thread cutting and tapping
CO4: Develop basic electrical engineering knowledge for house
wiring practice

Topics M/c shop & Carpentry shop -- 3X3= 9hrs.

Covered  Introduction on machining process.
 Introduction to machine tools- Lathe, Shaper, Milling and Drill
machine.
 Introduction to woods- Types, structure, disease and defect of
wood.
 Introduction to wood working machines and tools.
 Making of dovetail joint and bridle joint.
Welding Shop & Sheet metal -- 3X3= 9hrs.
 Introduction to welding.Safety and precautions in welding.
 Formation of weld bead by SMAW on mild steel flat.
 Formation of weld bead by oxy-fuel welding on mild steel flat.
 Introduction to sheet Metal works.
 Tools and Machines used in sheet metal works.
Syllabus for B Tech in Mechanical Engineering
11
  Concept of development, marking out of metal sheets.
 Cutting and joining of metal sheets.
 Safety precautions, General warning needed in the shop floor.
Black smithy & Foundry -- 3X3= 9hrs.
 Introduction Smithing and Forging- Tools, Machines, Furnaces
and its accessories, fuels.
 Safety and precautions in blacksmithy.
 Making of bars of different cross-sections.
 Making of hexagonal headed bolts.
 Forge welding.
 Introduction to Foundry Technology.
 Preparation of sand mould using Solid/Split Pattern.
Fitting & Electrical shop -- 3X3= 9hrs.
 Introduction to hand metal cutting tools with specifications,
nomenclature and their use.
 Marking tools, measuring tools and their use.
 Fitting of joints of mild steel flats.
 Introduction to electrical hazards and safety precaution.
 Wire jointing and soldering.
 PVC Conduit Wiring controlled by separate single way switches.
 PVC Cashing Capping Wiring for two way switches.
 Conduit wiring for the connection of a Calling Bell with In & Out
Indicators.
 Batten Wiring and Cleat Wiring.
 Tube Light Connection.
 Insulation Resistance Testing of 1ph / 3ph Motor and House
Wiring.
 Earth Resistance Testing.
 DOL Starter Connection.
Viva voce -- 1X3= 3hrs.
Text 1. Workshop Technology Part I and Part II by W. A. J. Chapman
Books, 2. Elements of Workshop Technology S. K. Hazra Chowdhury, A. K.
and/or Hazra Chowdhury and Nirjhar Roy
reference
3. Mechanical Workshop Practice by K. C. John
material

Syllabus for B Tech in Mechanical Engineering

12
 SECOND SEMESTER

Department of Mathematics
Course Title of the
Program Total Number of contact hours Cred
Code course Core (PCR) / it
Electives Lectur Tutori Practic Total
(PEL) e (L) al (T) al (P) Hour
s
MAC 02 Mathematics - II PCR 2 1 0 4 4

Pre-requisites Basic concepts of set theory, differential equations and

probability.
Course CO1: Develop the concept of basic linear algebra and matrix equations
Outcomes so as to apply mathematical methods involving arithmetic, algebra,
geometry to solve problems.
CO2: To acquire the basic concepts required to understand, construct,
solve and interpret differential equations.
CO3: Develop the concepts of Laplace transformation & Fourier
transformation with its property to solve ordinary differential
equations with given boundary conditions which are helpful in all
engineering & research work.
CO4: To grasp the basic concepts of probability theory

Topics Elementary algebraic structures: Group, subgroup, ring, subring,

Covered integral domain, and field. (5)
Linear Algebra: Vector space, Subspaces, Linear dependence and
independence of vectors, Linear span, Basis and dimension of a vector
space. Rank of a matrix, Elementary transformations, Matrix inversion,
Solution of system of Linear equations, Eigen values and Eigen vectors,
Cayley-Hamilton Theorem, Diagonalization of matrices.
(15)
Ordinary Differential Equations: Existence and uniqueness of
solutions of ODE (Statement Only), Equations of first order but higher
degree, Clairaut’s equation, Second order differential equations, Linear
dependence of solutions, Wronskian determinant, Method of variation of
parameters, Solution of simultaneous equations. (12)
Fourier series: Basic properties, Dirichlet conditions, Sine series,
Cosine series, Convergence. (4)

Laplace and Fourier Transforms: Laplace transforms, Inverse Laplace

transforms, Convolution theorem, Applications to Ordinary differential
equations. Fourier transforms, Inverse Fourier transform, Fourier sine
and cosine transforms and their inversion, Properties of Fourier
transforms, Convolution. (10)
Probability: Historical development of the subject and basic concepts,
Axiomatic definition of probability, Examples to calculate probability,
Stochastic simulation, Random numbers. Random variables and
probability distributions, Binomial distribution, Normal distribution.
(10)
Text Books, Text Books:
and/or 1. E. Kreyszig, Advanced Engineering Mathematics: 9th edition, Wiley
reference India Edition.
material 2. Gilbert Strang, Linear algebra and its applications (4th Edition),
Syllabus for B Tech in Mechanical Engineering
13
 Thomson (2006).
3. Shepley L. Ross, Differential Equations, 3rd Edition, Wiley Student
Edition.
Reference Books:
1. S. Kumaresan, Linear algebra - A Geometric approach, Prentice Hall
of India (2000).
2. C. Grinstead, J. L. Snell, Introduction to Probability, American
Mathematical Society

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
CSC01 Introduction
PCR 2 1 0 3 3
to Computing
Pre-requisites Basic knowledge of computer. CSC01 assumes no prior
knowledge of programming.
Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA

Course CO1: Recognize the changes in hardware and software technologies

Outcomes with respect to the evolution of computers and describe the
function of system software’s (operating Systems) and application
software’s, languages, number system, logic gates.
CO2: Illustrate the flowchart and inscribe an algorithm for a given
problem Inscribe C programs using operators.
CO3: Develop conditional and iterative statements to write C programs.
CO4: Exercise user defined functions to solve real time problems
CO5: Inscribe C programs that use Pointers to access arrays, strings
and functions.
CO6: Exercise user defined data types including structures and unions
to solve problems.

Topics Fundamentals of Computer: History of Computer, Generation of

Covered Computer, Classification of Computers 2L Basic Anatomy of
Computer System, Primary & Secondary Memory, Processing Unit,
Input & Output devices [2]
Languages: Assembly language, high level language, compiler and
assembler (basic concepts) [1]
Binary & Allied number systems representation of signed and unsigned
numbers. BCD, ASII. Binary Arithmetic & logic gates [2]
Basic concepts of operating systems like MS DOS, MS WINDOW, UNIX,
Algorithm & flow chart [1]
C Fundamentals: The C character set identifiers and keywords, data
type & sizes, variable names, declaration, statements [2]
Operators & Expressions: Arithmetic operators, relational and logical
operators, type, conversion, increment and decrement operators, bit
wise operators, assignment operators and expressions, precedence and
order of evaluation. Input and Output: Standard input and output,

Syllabus for B Tech in Mechanical Engineering

14
 formatted output -- printf, formatted input scanf. [8]
Flow of Control: Statement and blocks, if - else, switch, loops - while,
for do while, break and continue, go to and labels [5]
Fundamentals and Program Structures: Basic of functions, function
types, functions returning values, functions not returning values, auto,
external, static and register Variables, scope rules, recursion, function
prototypes, C pre-processor, command line arguments. [5]
Arrays and Pointers: One dimensional, two dimensional arrays, pointers
and functions, multi-dimensional arrays. [10]
Structures Union and File: Structure, union , structures and functions,
arrays of structures, file read, file write [5]

Text Text Books:

Books, 1. Let us C by Kanetkar
and/or 2. C Programming by Gottfried
reference 3. Introduction to Computing by Balaguruswamy
material 4. The C-programming language by Dennis Ritchie
Reference Books:
1. Computer fundamental and programming in C by P Dey and M.
Ghosh
2. Computer fundamental and programming in C by Reema Thareja
3. programming with C by Schaum Series

Cours Title of the Program Total Number of contact hours Credit

e course Core (PCR) Lectu Tutoria Practic Total
Code / Electives re (L) l (T) al (P) Hours
(PEL)
ECC0 Basic PCR 2 1 0 3 3
1 Electroni
cs
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: Acquire idea about basic electronic circuit, construction,
Outcomes operation.
CO2: Learn to use these Circuit elements for different applications..
CO3: Learn to analyze the circuits and to find out relation between
input and output.

Topics Semiconductors and its properties. (3)

Covered PN Junction formation and construction of Diode. (5)
Diode circuits as rectifiers, Diode based waveform shaping circuits. (4)
Bipolar Junction Transistor, construction and operation. (4)
BJT Biasing circuits, different types. (3)
Amplifier, Single stage, CE, CB, CC, operation and uses. (4)
Feedback amplifier, advantages & disadvantages, basic closed loop
analysis (3)
Other Semiconductor Devices : Operation and use of LED, JFET, DIAC,
MOSFET(2)
Opamp: Characteristics of ideal operational amplifier Pin Configuration
of IC 741, Analysis of simple operational amplifier circuits: concept of

Syllabus for B Tech in Mechanical Engineering

15
 virtual ground; non-inverting amplifier and inverting amplifier
Applications: voltage follower, summer, differentiator, integrator(6)
Oscillator: Positive feedback and condition of oscillation R-C phase-
shift oscillator, Wien bridge oscillator(3)
Boolean Algebra : Boolean algebra, De Morgan’s theorem,
simplification of Boolean expression, Number system, range extension
of numbers, Different codes: Gray code, ASCII code and different BCD
codes and their uses(4)
Logic Gates : NOT, OR, AND, NOR, NAND, EX-OR, EX-NOR gates
Simplification of logic functions, Realizations of logic expressions using
logic gates(4)
Text Text Books:
Books, 1. Introduction Electronic Devices & Circuit Theory,11/e, 2012,
and/or Pearson: Boylestad & Nashelsky
reference 2. Integrated Electronics: Millman & Halkias
material Reference Books:
1. The Art of Electronics 3e, by Paul Horowitz, Winfield Hill
2. Electronics - Circuits and Systems, Fourth Edition by Owen Bishop
3. Electronics Fundamentals: Circuits, Devices & Applications (8e) by
Thomas L. Floyd & David M. Buchla.
4. Electronic Principles, by Albert Paul Malvino Dr. and David J. Bates
5. Experiments Manual for use with Electronic Principles (Engineering
Technologies & the Trades) by Albert Paul Malvino Dr., David J. Bates,
et al.

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
EEC01 Electrical
PCR 2 1 0 3 3
Technology
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: To learn the fundamentals of Electric Circuits and Network
Outcomes theorems.
CO2: To develop an idea on Magnetic circuits, Electromagnetism
CO3: To learn about single phase and polyphase AC circuits.
CO4: Introduction to single phase transformer.
CO5: Introduction to the transient analysis of RLC circuits with DC
excitation.

Topics Fundamentals of Electric Circuits: Ohm’s laws, Kirchhoff’s laws,

Covered Independent and Dependent sources, Analysis of simple circuits. (3)
Network theorems. (4)
Magnetic field, Concept of magnetic circuits, Magnetomotive Force,
Reluctance, Ampere’s circuital law and Biot-Savart law, Determination
of B/H curve, Comparison of electric and magnetic circuit,
Electromagnetic induction, Faraday’s laws of electromagnetic
induction, Direction and Magnitude of induced E.M.F. (7)
Self and mutual Inductance, Inductances in series and parallel, Energy
stored in inductor, Capacitance, Capacitance in series and parallel,

Syllabus for B Tech in Mechanical Engineering

16
 Relationship between charge, voltage and current, Energy stored in
capacitor (5)
Transients with D.C. excitation. (5)
Generation of alternating voltage and current, E.M.F. equation,
Average and R.M.S. value, Phase and phase difference, Phasor
representation of alternating quantity, Behaviour of A.C. circuits,
Resonance in series and parallel R-L-C circuits (7)
Single-Phase Transformer , equivalent circuits, open circuit and short
circuit tests (6)
Polyphase system, Advantages of 3-phase system, Generation of 3-
phase voltages, Voltage, current and power in a star and delta
connected systems, 3-phase balanced and unbalanced circuits, Power
measurement in 3-phase circuits. (5)
Text Text Books:
Books, 1. Electrical & Electronic Technology by Hughes, Pearson Education
and/or India
reference Reference Books:
material 1. Advanced Electrical Technology by H. Cotton, Reem Publication Pvt.
Ltd
2. Electrical Engineering fundamentals by Vincent Deltoro, Pearson
Education India

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
MES5
Engineering
1 PCR 1 0 2 3 2
Graphics
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1 To develop the ability of mental visualization of different objects
Outcomes CO2 To impart knowledge regarding standard conventions on lettering,
dimensioning, symbols etc
CO3 To introduce with the theory of orthographic projection to solve
problems on one/two/three dimensional objects
CO4 To prepare for the higher semester departmental drawings
CO5 To give exposure to read/interpret industrial drawing and to
communicate with relevant people

Topics Graphics as language of communication; technical drawing tools and

Covered their up-keep; types of lines; construction of geometrical figures;
lettering and dimensioning. [6]
Construction and use of scales; construction of curves of engineering
importance such as curves of conic section; spirals, cycloids, involutes
and different loci of points; use of equations for drawing some curves.
[9]
Descriptive geometry: necessity and importance of orthographic
projection; horizontal and vertical reference planes; coordinate of
points; orthographic projection of points and lines situated in different
Syllabus for B Tech in Mechanical Engineering
17
 quadrants, viz. 1st, 2nd, 3rd and 4th quadrants; traces of lines. First angle
and third angle projection of lines and planes; views from top, front and
left (or right); true length and true inclination of lines with planes of
projections; primary auxiliary projection of points, lines and planes;
auxiliary plan and auxiliary elevation. [9]
Projection of simple regular solids, viz. prisms, cubes, cylinders,
pyramids, cones, tetrahedrons, spheres, hemi-spheres etc. [6]
Section of solids; section by perpendicular planes; sectional views; true
shapes of sections. [6]
Dimensional techniques; international and national standards (ISO and
BIS). [3]
Freehand graphics. [3]
Text 1. Engineering Drawing and Graphics – K Venugopal
Books, 2. Engineering Drawing – N D Bhat
and/or 3. Practical Geometry and Engineering Graphics – W Abbott
reference
material

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectur Tutori Practic Total it
Electives e (L) al (T) al (P) Hour
(PEL) s
CSS51 Computing
PCR 0 0 2 2 1
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: To understand the principle of operators.
Outcomes CO2: To understand the principle of loops, branching statements
CO3: To understand the working principle of function, recursion
CO5: To understand arrays , pointer, parameter passing techniques
CO6: To detail out the operations of strings
CO7: To understand structure, union
CO7: Application of C-programming to solve various real time
problems
Topics List of Experiments:
Covered 1. Assignments on expression evaluation
2. Assignments on conditional branching, iterations, pattern matching
3. Assignments on function, recursion
4. Assignments on arrays, pointers, parameter passing
5. Assignments on string using array and pointers
6. Assignments on structures, union
Text Text Books:
Books, 1. Let us C by Kanetkar
and/or 2. C Programming by Gottfried
reference 3. Introduction to Computing by Balaguruswamy
material 4. The C-programming language by Dennis Ritchie
Reference Books:
1. Computer fundamental and programming in C by P Dey and M. Ghosh
2. Computer fundamental and programming in C by Reema Thareja

Syllabus for B Tech in Mechanical Engineering

18
 3. programming with C by Schaum Series

Department of Electronics and Communication Engineering (For all UG)

Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
ECS 51 Basic PCR 0 0 2 2 1
electronics
Lab
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: Acquire idea about basic electronic components, identification
Outcomes and behavior.
CO2: To determine IV characteristics of these Circuit elements for
different applications.
CO3: Learn to analyze the circuits and observe and relate input and
output signals.

Labs 1. To know your laboratory: To identify and understand the use of

Conducted different electronic and electrical instruments.
. 2. To identify and understand name and related terms of various
electronics components used in electronic circuits: Identify
different terminals of components, fid their values and observe
numbering associate with it.
3. Use of oscilloscope and function generator: Use of oscilloscope
to measure voltage, frequency/time and Lissajous figures of
displayed waveforms.
4. Study of half wave and Full-wave (Bridge) rectifier with and
without capacitor filter circuit:
5. Realization of basic logic gates: Truth table verification of OR,
AND, NOT, NOT and NAND logic gates from TTL ICs
6. Regulated power supply: To study LM78XX and LM79XX voltage
regulator ICs
7. Transistor as a Switch: To study and perform transistor as a
switch through NOT gate
8. Zenner diode as voltage regulator
9. To study clipping and Clamping circuits
10.To study different biasing cirtis.
11.Study of CE amplifier and observe its frequency response.
Text Text Books:
Books, 1. Experiments Manual for use with Electronic Principles (Engineering
and/or Technologies & the Trades) by Albert Paul Malvino Dr., David J. Bates,
reference et al.
material Reference Books:
1. The Art of Electronics 3e, by Paul Horowitz, Winfield Hill
2. Electronic Principles, by Albert Paul Malvino Dr. and David J.
Bates

Syllabus for B Tech in Mechanical Engineering

19
Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
Electrical
EES51
Technology PCR 0 0 2 2 1
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: To understand the principle of superposition.
Outcomes CO2: To understand the principle of maximum power transfer
CO3: To understand the characteristics of CFL, incandescent Lamp,
carbon lamp.
CO4: To understand the calibration of energy meter.
CO5: To understand open circuit and short circuit test of single phase
transformer.
CO6: To analyse RLC series and parallel circuits
CO7: To understand three phase connections
Topics List of Experiments:
Covered 1.To verify Superposition and Thevenin theorem
2. To verify Norton and Maximum power transfer theorem
3. Characteristics of fluorescent and compact fluorescent lamp
4. Calibration on energy meter
5. To perform the open circuit and short circuit test on single phase
transformer
6. To study the balanced three phase system for star and delta
connected load
7. Characteristics of different types of Incandescent lamps
8. Study of Series and parallel R-L-C circuit
Text Text Books:
Books, 1. Suggested Text Books:
and/or 1. Handbook of Laboratory Experiments in Electronics and Electrical
reference Engineering by A M Zungeru (Author), J M Chuma (Author), H U Ezea
material (Author)

Cours Title of the Progra Total Number of contact hours Credi

e course m Core Lectur Tutori Practic Total t
Code (PCR) / e (L) al (T) al (P) Hour
Elective s
s (PEL)
HSS51 Professional PCR 1 0 2 3 2
Communicati
on Lab
Pre-requisites Course Assessment methods (Continuous Test (CT)
and/or End Assessment (EA))
None CT
Course CO1: Improvement in linguistic proficiency of the learners
Outcome CO2: Improvement in communicative ability of the learners
s
Topics 1. Professional Communication: Introduction (1)
Covered 2. Technical Writing: Basic Concepts (2)
Syllabus for B Tech in Mechanical Engineering
20
 3. Style in Technical Writing (3)
4. Technical Report (2)
5. Recommendation Report (2)
6. Progress Report (1)
7. Technical Proposal (3)
8. Business Letters (3)
9. Letters of Job Application (2)
10.Writing Scientific and Engineering Papers (3)
11.Effective Use of Graphic Aids (2)
12.Presentation Techniques (6)
13.Group Discussion (6)
14.Interview Techniques (6)
Text Text Book:
Books, 1. English for Engineers –Sudharshana & Savitha (Cambridge UP)
and/or
referenc Reference Books:
e 1. Technical Communication—Raman & Sharma (Oxford UP)
material 2. Effective Technical Communication—M A Rizvi (McGraw Hill
Education)

COMMON FIRST YEAR COURSES – (2018 -19

ONWARDS)

FIRST SEMESTER

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
MAC Mathematics - I PCR 3 1 0 4 4
01

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))
Basic concepts of CT+EA
function, limit,
differentiation and
integration.
Course CO1: Fundamentals of Differential Calculus
Outcomes CO2: Fundamentals of Integral Calculus
CO3: Fundamentals of Vector Calculus
CO4: Basic Concepts of Convergence
Topics Functions of Single Variable: Rolle’s Theorem and Lagrange’s Mean
Covered Value Theorem (MVT), Cauchy's MVT, Taylor’s and Maclaurin’s series,
Asymptotes & Curvature (Cartesian, Polar form). (8)

Syllabus for B Tech in Mechanical Engineering

21
 Functions of several variables: Function of two variables, Limit,
Continuity and Differentiability, Partial derivatives, Partial derivatives
of implicit function, Homogeneous function, Euler’s theorem and its
converse, Exact differential, Jacobian, Taylor's & Maclaurin's series,
Maxima and Minima, Necessary and sufficient condition for maxima
and minima (no proof), Stationary points, Lagrange’s method of
multipliers. (10)

Sequences and Series: Sequences, Limit of a Sequence and its

properties, Series of positive terms, Necessary condition for
convergence, Comparison test, D Alembert’s ratio test, Cauchy’s root
test, Alternating series, Leibnitz’s rule, Absolute and conditional
convergence. (6)

Integral Calculus: Mean value theorems of integral calculus,

Improper integral and it classifications, Beta and Gamma functions,
Area and length in Cartesian and polar co-ordinates, Volume and
surface area of solids of revolution in Cartesian and polar forms, (12)

Multiple Integrals: Double integrals, Evaluation of double integrals,

Evaluation of triple integrals, Change of order of integration, Change
of variables, Area and volume by double integration, Volume as a triple
integral. (10)

Vector Calculus: Vector valued functions and its differentiability, Line

integral, Surface integral, Volume integral, Gradient, Curl, Divergence,
Green’s theorem in the plane (including vector form), Stokes’ theorem,
Gauss’s divergence theorem and their applications. (10)

Text Text Books:

Books, 1. E. Kreyszig, Advanced Engineering Mathematics: 10 th edition,
and/or Wiley India Edition.
reference 2. Daniel A. Murray, Differential and Integral Calculus, Fb & c Limited,
material 2018.
3. Marsden, J. E; Tromba, A. J.; Weinstein: Basic Multivariable
Calculus, Springer, 2013.
Reference Books:
1. Tom Apostal, Calculus-Vol-I & II, Wiley Student Edition, 2011.
2. Thomas and Finny: Calculus and Analytic Geometry, 11 th Edition,
Addison Wesley.

Cours Title of the Program Total Number of contact hours Credit

e course Core (PCR) Lectur Tutoria Practica Total
Code / Electives e (L) l (T) l (P) Hour
(PEL) s
PHC0 Physics PCR 2 1 0 3 3
1
Pre-requisites: Course Assessment methods: (Continuous (CT), MID
term and End Term Assessment (EA))
NIL CT+EA
Course CO1: To realize and apply the fundamental concepts of physics such as
Outcome superposition principle, simple harmonic motion to real world

Syllabus for B Tech in Mechanical Engineering

22
s problems.
CO2: Learn about the quantum phenomenon of subatomic particles and
its applications to the practical field.
CO3: Gain an integrative overview and applications of fundamental
optical phenomena such as interference, diffraction and
polarization.
CO4: Acquire basic knowledge related to the working mechanism of
lasers and signal propagation through optical fibers.

Topics Harmonic Oscillations - Linear superposition principle, Superposition

Covered of two perpendicular oscillations having same and different frequencies
and phases, Free, Damped and forced vibrations, Equation of motion,
Amplitude resonance, Velocity resonance, Quality factor, sharpness of
resonance, etc. [8]
Wave Motion - Wave equation, Longitudinal waves, Transverse waves,
Electro-magnetic waves. [3]
Introductory Quantum Mechanics - Inadequacy of classical
mechanics, Blackbody radiation, Planck’s quantum hypothesis, de
Broglie’s hypothesis, Heisenberg’s uncertainty principle and
applications, Schrodinger’s wave equation and applications to simple
problems: Particle in a one-dimensional box, Simple harmonic oscillator,
Tunnelling effect. [8]
Interference & Diffraction - Huygens’ principle, Young’s experiment,
Superposition of waves, Conditions of sustained Interference, Concepts
of coherent sources, Interference by division of wavefront, Interference
by division of amplitude with examples, The Michelson interferometer
and some problems; Fraunhofer diffraction, Single slit, Multiple slits,
Resolving power of grating. [13]
Polarisation - Polarisation, Qualitative discussion on Plane, Circularly
and elliptically polarized light, Malus law, Brewster’s law, Double
refraction (birefringence) - Ordinary and extra-ordinary rays, Optic axis
etc.; Polaroid, Nicol prism, Retardation plates and analysis of polarized
lights. [5]
Laser and Optical Fiber - Spontaneous and stimulated emission of
radiation, Population inversion, Einstein’s A & B co-efficient, Optical
resonator and pumping methods, He-Ne laser. Optical Fibre– Core and
cladding, Total internal reflection, Calculation of numerical aperture and
acceptance angle, Applications. [5]
Text TEXT BOOKS:
Books, 1. The Physics of Vibrations and Waves, H. John Pain, Willy and Sons
and/or 2. Vibrations and Waves in Physics, Iain G. Main, Cambridge
referen University Press
ce 3. Engineering Physics, H. K. Malik and A. K. Singh, McGraw-Hill.
materia
REFERENCE BOOKS:
l
1. Quantum Physics, R. Eisberg and R. Resnick, John Wiley and Sons
2. Fundamental of Optics, Jankins and White, McGraw-Hill
3. Optics, A. K. Ghatak, Tata McGraw-Hill
4. Waves and Oscillations, N. K. Bajaj, Tata McGraw-Hill
5. Lasers and Non-linear Optics, B. B. Laud , New Age International
Pvt Lt

Syllabus for B Tech in Mechanical Engineering

23
Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
CYC Engineering PCR 2 1 0 3 3
01 Chemistry
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
None CT+EA
Course CO1: Introduced to chemical thermodynamics, kinetics,
Outcomes electrochemistry, absorption and catalytic processes for
engineering applications
CO2: To learn fundamentals of polymer chemistry and petroleum
engineering.
CO3: Introduced to basic spectroscopic techniques for structure
determination and characterization.
CO4: To study few inorganic and bioinorganic compounds of industrial
importance.

Topics ORGANIC CHEMISTRY

Covered vi. Fundamentals of organic reaction mechanisms; Few important
reactions and their mechanism along with their applications;
Robinson annulation, Hydroboration reaction, Organometallic
reagents (Gilman reagents), Metathesis using Grubb’s catalyst
and Wittig reaction. (3)
vii. Fundamental concept on stereochemistry and application:
Conformation and configuration of organic compounds,
Diastereo-selective, enantio-selective, regio-selective, stereo-
specific and stereo-selective reactions. (3)
viii. Polymer chemistry and polymer engineering: Fundamental
concept on polymer chemistry; synthesis and application of
important polymers, Rubber and plastic materials. Conducting
polymer. (2)
ix. Petroleum Engineering and oil refinery: origin of mineral oils,
separation principle and techniques of distillation of crude oil,
Uses of different fractions, octane number, cetane number,
Knocking, anti-knock compounds, and Bio-Fuel. (2)
x. Structure elucidation of organic compounds by modern
spectroscopic methods; Application of UV-Visible and FT-IR
spectroscopy. (3)
INORGANIC CHEMISTRY
v. Coordination Chemistry: Crystal Field Theory of octahedral
and tetrahedral complexes, colour and magnetic properties, Jahn-
Teller distortion, pseudo Jahn-Teller distortion, Isomerism and
stereochemistry.(5)
vi. Bioinorganic Chemistry: Heme and non-heme O2 transport
protein (Haemoglobin, Myoglobin), Chlorophyll and
photosynthesis. (3)
vii. Inorganic Materials: Introduction towards industrially
important inorganic materials like cementing material, refractory
material, fertiliser, inorganic polymer. (2)
viii. Organometallic Chemistry: π-acid ligands, stabilization of
metal low oxidation state and 18 electron rules, metal carbonyls

Syllabus for B Tech in Mechanical Engineering

24
 and nitrosyls, metal-alkene complexes. (4)
PHYSICAL CHEMISTRY
vi. Thermodynamics: 2nd law of thermodynamics, entropy, free
energy, Gibbs Helmholtz equation, change of phase. Cryogenics:
joule Thomson experiment. (4)
vii. Chemical Kinetics: 2nd and 3rd order rate expression,
Reversible reaction, Chain reaction, Consecutive reaction, Temp
effect on reaction rate. (4)
viii. Electrochemistry: Electrochemical cell, Effect of pH,
precipitation and complex formation on EMF of
oxidation/reduction processes. (2)
ix. Absorption: Physical and Chemical absorption, Absorption
isotherms. (1)
x. Catalysis: Types of catalysis, Rate expression for Catalysed
reaction, Acid-base and Enzyme catalysis. (2)

Text Suggested Text Books:

Books, (i) Physical Chemistry by P. Atkins, Oxford
and/or (ii) A guidebook to mechanism in Organic chemistry: Peter Sykes;
reference Pearson Edu.
material (iii) Inorganic Chemistry Part-I & II, R. L. Dutta, The new book stall
Suggested Reference Books:
Organic Chemistry:
(i) Basic stereochemistry of organic molecules: S. Sengupta; Oxford
University press
(ii) Engineering Chemistry: Wiley
(iii) Elementary Organic Spectroscopy: William Kemp, ELBS with
Macmillan
Inorganic Chemistry:
(i) Inorganic Chemistry: Principle structure and reactivity, J. E.
Huheey, E. A. Keiter and R. L. Keiter, Pearson Education
(ii) Bioinorganic Chemistry -- Inorganic Elements in the Chemistry of
Life: An Introduction and Guide, 2nd Edition, Wolfgang Kaim,
Brigitte Schwederski, Axel Klein.
(iii) Inorganic Chemistry Fourth Edition, Shriver & Atkins, Oxford
Physical Chemistry:
(i) Physical Chemistry by G.W Castellan
(ii) Physical Chemistry by P. C. Rakshit

Course Title of the Program Total Number of contact hours Credit

Code course Core Lectur Tutori Practic Total
(PCR) / e (L) al (T) al (P) #
Hour
Electives s
(PEL)
XEC0 Engineering PCR 2 1 0 3 3
1 Mechanics

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))
CT+EA
Syllabus for B Tech in Mechanical Engineering
25
Course CO1: Improves the knowledge of mechanics and ability to draw free
Outcomes body diagrams.
CO2: Imparts knowledge on application of mechanics for special
problems like truss and frame analysis.
CO3: Builds up ability to calculate centroid and moments of inertia for
various shapes and its application thereof.
CO4: Enhances the idea on dynamics with different engineering
applications using momentum and energy principles.
CO5: Introduces with Virtual Work Principle and its simple application.
CO6: Prepares the prerequisites for studying the subject Strength of
Materials / Solid Mechanics.

Topics Engineering Mechanics; measurement and SI units. [1]

Covered Vectors and force as a vector; Resultant of a system of forces on a
particle; free body diagram and conditions of equilibrium of a particle;
problems on particles; equilibrium of particles in space. [2]
Resultant of a system of forces and couples on a rigid body; conditions
of equilibrium of a rigid body; free body diagrams of rigid bodies
subjected to different types of constraints; simple space problems of
rigid bodies. [4]
Coefficients of static and kinetic friction; problems involving friction;
theories of friction on square threaded power screw and flat belt. [5]
Simple trusses; analysis of trusses by method of joints and method of
sections. [5]
Centre of gravity and centre of mass; centroids of lines, curves and
areas; first moment of area; second moment of area; polar moment of
inertia; radius of gyration of an area; parallel axis theorem; mass
moment of inertia. [4]
Path, velocity, acceleration; rectilinear and curvilinear motion; motion
of system of particles; introduction to the concept of plane kinematics
of rigid bodies. [6]
Newton's second law of motion; dynamic equilibrium and D'Alembert's
principle; linear momentum; angular momentum; rectilinear and
curvilinear motion; principles of work–energy and impulse–momentum;
impact of system of particles; introduction to the concept of plane
kinetics of rigid bodies. [12]
Principle of Virtual Work, Solution of Problems on Mechanics using
Principle of Virtual Work [3]
Text 1. S P Timoshenko and D H Young, Engineering Mechanics, 5 th
Books, Edition
and/or 2. J L Meriam and L G Kraige, Engineering Mechanics, 5 th Edition,
reference
Wiley India
material
3. F P Beer and E R Johnston, Vector Mechanics for Engineers
4. I H Shames, Engineering Mechanics

Syllabus for B Tech in Mechanical Engineering

26
Course Title of the Program Total Number of contact hours Credit
Code course Core Lectur Tutori Practic Total
(PCR) / e (L) al (T) al (P)# Hour
Electives s
(PEL)
ESC0 Environment PCR 2 0 0 2 2
1 al Science

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))
CT+EA
Course CO1 Understand the importance of environment and ecosystem.
Outcomes CO2 Understand the fundamental aspect of pollutant tracking and its
implementation in natural and anthropogenic pollution of air and
water system.
CO3 Understand the scientific basis of local and as well as global
issues.
CO4 Apply of knowledge to develop sustainable solution.

Topics Introduction: Multidisciplinary nature of Environmental Studies; Basic

Covered issues in Environmental Studies. [2]
Human population and the Environment. [1]
Social issues and the Environment. [1]
Constituents of our Environment & the Natural Resources:
Atmosphere– its layers, their characters; Global warming, Ozone
depletion, Acid rain, etc. [5]
Hydrosphere - Its constituents, Oceans, Groundwater, Surface waters;
Hydrological cycle. [4]
Lithosphere - constituents of lithosphere; Rock and Mineral resources;
Plate Tectonic Concept and its importance. [5]
Biosphere – its components; Ecosystems and Ecology; Biodiversity;
Biomes. [5]
Natural disaster and their management – Earthquakes, Floods,
Landslides, Cyclones. [3]
Pollution: Pollutants and their role in air and water pollution. [2]

Text 1. Environmental Studies – Benny Joseph – Tata McgrawHill-2005.

Books, 2. Environmental Studies – Dr. D.L. Manjunath, Pearson Education-
and/or 2006.
reference
3. Principles of Environmental Science and Engineering – P.
material
Venugoplan Rao, Prentice Hall of India.
4. Environmental Science and Engineering – Meenakshi, Prentice
Hall India.
5. Environmental studies – R. Rajagopalan – Oxford Publication -
2005.
6. Text book of Environmental Science & Technology – M. Anji
Reddy – BS Publication.
Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Total it
Syllabus for B Tech in Mechanical Engineering
27
 Electives re (L) al (T) al (P) Hou
(PEL) rs
XES51 Engineering
PCR 1 0 3 4 2.5
Graphics
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1 To develop the ability of mental visualization of different objects
Outcomes CO2 To impart knowledge regarding standard conventions on lettering,
dimensioning, symbols etc
CO3 To introduce with the theory of orthographic projection to solve
problems on one/two/three dimensional objects
CO4 To prepare for the higher semester departmental drawings
CO5 To give exposure to read/interpret industrial drawing and to
communicate with relevant people
Topics Graphics as language of communication; technical drawing tools and
Covered their up-keep; types of lines; construction of geometrical figures;
lettering and dimensioning. [6]
Construction and use of scales; construction of curves of engineering
importance such as curves of conic section; spirals, cycloids, involutes
and different loci of points; use of equations for drawing some curves.
[9]
Descriptive geometry: necessity and importance of orthographic
projection; horizontal and vertical reference planes; coordinate of
points; orthographic projection of points and lines situated in different
quadrants, viz. 1st, 2nd, 3rd and 4th quadrants; traces of lines. First angle
and third angle projection of lines and planes; views from top, front and
left (or right); true length and true inclination of lines with planes of
projections; primary auxiliary projection of points, lines and planes;
auxiliary plan and auxiliary elevation. [9]
Projection of simple regular solids, viz. prisms, cubes, cylinders,
pyramids, cones, tetrahedrons, spheres, hemi-spheres etc. [6]
Section of solids; section by perpendicular planes; sectional views; true
shapes of sections. [6]
Dimensional techniques; international and national standards (ISO and
BIS). [3]
Freehand graphics. [3]

Text 1. Engineering Drawing and Graphics – K Venugopal

Books, 2. Engineering Drawing – N D Bhat
and/or 3. Practical Geometry and Engineering Graphics – W Abbott
reference
material

Syllabus for B Tech in Mechanical Engineering

28
Cours Title of the Progra Total Number of contact hours Credi
e course m Core Lectur Tutori Practic Total t
Code (PCR) / e (L) al (T) al (P) Hour
Elective s
s (PEL)
HSS51 Professional PCR 1 0 2 3 2
Communicati
on Lab
Pre-requisites Course Assessment methods (Continuous Test (CT)
and/or End Assessment (EA))
None CT
Course CO1: Improvement in linguistic proficiency of the learners
Outcome CO2: Improvement in communicative ability of the learners
s
Topics 1. Professional Communication: Introduction (1)
Covered 2. Technical Writing: Basic Concepts (2)
3. Style in Technical Writing (3)
4. Technical Report (2)
5. Recommendation Report (2)
6. Progress Report (1)
7. Technical Proposal (3)
8. Business Letters (3)
9. Letters of Job Application (2)
10.Writing Scientific and Engineering Papers (3)
11.Effective Use of Graphic Aids (2)
12.Presentation Techniques (6)
13.Group Discussion (6)
14.Interview Techniques (6)
Text Text Book:
Books, 1. English for Engineers –Sudharshana & Savitha (Cambridge UP)
and/or
referenc Reference Books:
e 1. Technical Communication—Raman & Sharma (Oxford UP)
material 2. Effective Technical Communication—M A Rizvi (McGraw Hill
Education)

Cours Title of the Program Total Number of contact hours Cred

e course Core (PCR) Lectu Tutori Practic Tota it
Code / Electives re (L) al (T) al (P)# l
(PEL) Hou
rs
PHS5 Physics PCR 0 0 2 2 1
1 Laboratory
Pre-requisites Course Assessment methods: (Continuous evaluation (CE)
and end assessment (EA))
NIL CE+EA

Syllabus for B Tech in Mechanical Engineering

29
Course CO1: To realize and apply different techniques for measuring
Outcome refractive indices of different materials.
s CO2: To realize different types of waveforms in electrical signals
using CRO.
CO3: To understand charging and discharging mechanism of a
capacitor.
CO4: To understand interference, diffraction and polarization related
optical phenomena.
CO5: To acquire basic knowledge of light propagation through fibers.
Topics 10. Find the refractive index of a liquid by a travelling microscope.
Covered 11. Determine the refractive index of the material of prism using
spectrometer.
12. Determination of amplitude and frequency of electrical signals by
oscilloscope.
13. To study the characteristics of RC circuits.
14. To study Brewster’s law/Malus’ law using laser light.
15. To study the diffraction of light by a grating.
16. To study the interference of light by Newton’s ring apparatus.
17. To determine numerical aperture of optical fiber.
18. Determination of Planck constant.

Text SUGGESTED BOOKS:

Books, 3) A Text Book on Practical Physics – K. G. Majumdar.
and/or 4) Practical Physics – Worsnop and Flint
reference REFERENCE:
material 1) Instruction sheets

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectur Tutori Practic Total it
Electives e (L) al (T) al (P) Hour
(PEL) s
CYS51 Chemistry PCR 0 0 2 2 1
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
None CT+EA
Course CO1: To learn basic analytical techniques useful for engineering
Outcomes applications.
CO2: Synthesis and characterization methods of few organic, inorganic
and polymer compounds of industrial importance.
CO3: Learn chromatographic separation methods.
CO4: Applications of spectroscopic measurements.

Topics xi. Experiments based on pH metry: Determination of dissociation

Covered constant of weak acids by pH meter.
xii. Experiments based on conductivity measurement: Determination of
amount of HCl by conductometric titration with NaOH.
xiii. Estimation of metal ion: Estimation of Fe2+ by permangnomentry
xiv. Estimation of metal ion: Determination of total hardness of water by
Syllabus for B Tech in Mechanical Engineering
30
 EDTA titration.
xv. Synthesis and characterization of inorganic complexes: e. g.
Mn(acac)3, Fe(acac)3, cis-bis (glycinato)copper(II) monohydrate and
their characterization by m. p. , FTIR etc.
xvi. Synthesis and characterization of organic compounds: e.g.
Dibenzylideneacetone.
xvii. Synthesis of polymer: polymethylmethacrylate
xviii. Verification of Beer-Lamberts law and determination of amount of
iron present in a supplied solution.
xix. Chromatography: Separation of two amino acids by paper
chromatography
xx. Determination of saponification value of fat/ vegetable oil
Text Suggested Text Books:
Books, 1. Vogel's Quantitative Chemical Analysis (6th Edition) Prentice Hall
and/or 2. Advanced Physical Chemistry Experiments: By Gurtu & Gurtu
reference 3. Comprehensive Practical Organic Chemistry: Qualitative Analysis By
material V. K. Ahluwalia and S. Dhingra
Suggested Reference Books:
1. Practical Chemistry By R.C. Bhattacharya
2. Selected experiments in Physical Chemistry By N. G. Mukherjee

Cours Title of the Program Total Number of contact hours Credi

e course Core Lectur Tutori Practic Total t
Code (PCR) / e (L) al (T) al (P)# Hour
Electives s
(PEL)
WSS5 Workshop PCR 0 0 3 3 1.5
1 Practice
Pre-requisites Course Assessment methods: (Continuous evaluation (CE)
and end assessment (EA))
NIL CE+EA

Course CO1: Study and practice on machine tools and their operations
Outcome CO2: Practice on manufacturing of components using workshop
s trades including fitting, carpentry, foundry and welding
CO3: Identify and apply suitable tools for machining processes
including turning, facing, thread cutting and tapping
CO4: Develop basic electrical engineering knowledge for house
wiring practice
Topics M/c shop & Carpentry shop -- 3X3= 9hrs.
Covered  Introduction on machining process.
 Introduction to machine tools- Lathe, Shaper, Milling and Drill
machine.
 Introduction to woods- Types, structure, disease and defect of
wood.
 Introduction to wood working machines and tools.
 Making of dovetail joint and bridle joint.
Welding Shop & Sheet metal -- 3X3= 9hrs.

Syllabus for B Tech in Mechanical Engineering

31
  Introduction to welding.Safety and precautions in welding.
 Formation of weld bead by SMAW on mild steel flat.
 Formation of weld bead by oxy-fuel welding on mild steel flat.
 Introduction to sheet Metal works.
 Tools and Machines used in sheet metal works.
 Concept of development, marking out of metal sheets.
 Cutting and joining of metal sheets.
 Safety precautions, General warning needed in the shop floor.
Black smithy & Foundry -- 3X3= 9hrs.
 Introduction Smithing and Forging- Tools, Machines, Furnaces
and its accessories, fuels.
 Safety and precautions in blacksmithy.
 Making of bars of different cross-sections.
 Making of hexagonal headed bolts.
 Forge welding.
 Introduction to Foundry Technology.
 Preparation of sand mould using Solid/Split Pattern.
Fitting & Electrical shop -- 3X3= 9hrs.
 Introduction to hand metal cutting tools with specifications,
nomenclature and their use.
 Marking tools, measuring tools and their use.
 Fitting of joints of mild steel flats.
 Introduction to electrical hazards and safety precaution.
 Wire jointing and soldering.
 PVC Conduit Wiring controlled by separate single way switches.
 PVC Cashing Capping Wiring for two way switches.
 Conduit wiring for the connection of a Calling Bell with In & Out
Indicators.
 Batten Wiring and Cleat Wiring.
 Tube Light Connection.
 Insulation Resistance Testing of 1ph / 3ph Motor and House
Wiring.
 Earth Resistance Testing.
 DOL Starter Connection.
Viva voce -- 1X3= 3hrs.
Text 1. Workshop Technology Part I and Part II by W. A. J. Chapman
Books, 2. Elements of Workshop Technology S. K. Hazra Chowdhury, A. K.
and/or Hazra Chowdhury and Nirjhar Roy
reference
3. Mechanical Workshop Practice by K. C. John
material

Program Total Number of contact hours

Title of Core Lectur Tutori Practic Total
Course Cred
the (PCR) / e (L) al (T) al (P) Hour
Code it
course Electives s
(PEL)
Co-
curricula
XXS-51 PCR 0 0 2 2 1
r
Activities
Pre- Course assessment methods: Continuous evaluation (CE) and end

Syllabus for B Tech in Mechanical Engineering

32
requisite assessment (EA)
s
NIL CE + EA
Course  CO1: Social Interaction: Through the medium of sports
Outcome  CO2: Ethics: Recognize different value systems including
s your own, understand the moral dimensions of your
decisions, and accept responsibility for them
 CO3: Self-directed and Life-long Learning: Acquire the ability
to engage in independent and life-long learning in the
broadest context socio-technological changes.
 CO4: Personality development through community
engagement
 CO5: Exposure to social service
Topics YOGA
Covered  Introduction of Yoga.
 Sitting Posture/Asanas- Padmasana, Vajrasana, Ardha
kurmasana, Ustrasana, Bakrasana, Sasankasana,
Janusirshasana, Suryanamaskar.
 Mudra- Gyana mudra, Chin mudra, Shuni mudra, Prana
mudra, Adi mudra, Anjali mudra.
 Laying Posture/Asanas- Pavana Muktasana, Uttana
Padasana, Sarpasana, Bhujangasana (Cobra Pose), Eka Pada
Śalabhāsana, Dhanurasana, Chakrasana, Viparitkarani.
 Meditation- Yog nidra, Om chant, Pray chant.
 Standing Posture/Asanas- Tadasana (Mountain Pose),
Vrikshasana (Tree Pose), Ardha chandrasana, Trikonasana,
Utkatasana, Padahastasana.
 Pranayama- Deep breathing, Anulom Vilom, Suryabhedi,
Chandrabhedi.
 Kriya- Kapalbhati, Trataka.
ATHLETICS
 Introduction of Athletic.
 Starting Technique for Track events- Standing start, Crouch
start & Block start.
 Finishing Techniques.
 Relay Race- 4×100m, 4×400m & Baton Exchange Technique
& Rules.
 Track Marking with Fundamentals- 200m, 400m and
Diagonal Distance Radius, Straight Distance, Staggers of
Different Lanes & Curve Distance.
BASKETBALL
 Introduction and Players stance and ball handling.
 Passing- Two hand chest pass, Two hand bounce pass, One
hand baseball pass, Side arm pass, Over head pass, Hook
pass.
 Receiving- Two hand receiving, One hand receiving,
Receiving in stationary position, Receiving while jumping
and Receiving while running.
 Dribbling- Dribble, High dribble, Low dribble, Reverse
dribble, Rolling dribble.
 Rules of Basketball.
 Basketball game.
VOLLEYBALL

Syllabus for B Tech in Mechanical Engineering

33
 Introduction of Volleyball
Service- Underarm service, Sidearm service, Tennis service,
Floating service, Jump service.
 Pass: Underarm pass- Ready position, Teaching stage of
underarm pass and Upper hand pass- Volley pass, Back pass,
Short set, Jump set & Underarm set.
 Rules and their interpretation.
FOOTBALL
 Introduction of Football
 Push pass- Instep inside, Instep outer side.
 Kicking- Spot kick, Instep kick, Lofted kick.
 Dribbling- One leg, Both legs, Instep.
 Trapping- Rolling ball sole trapping, High ball sole trapping,
High ball chest trapping, High ball thigh trapping.
 Throwing- Standing throw, Running throw, Seating throw.
 Goal Keeping- Griping the ball, Full volley, Half volley, Drop
Kick.
 Rules and their interpretation.
CRICKET
 Introduction of Cricket
 Batting gripping & Stance, Bowling gripping technique.
 Batting front foot defense & Drive.
 Batting Back foot defense & Drive.
 Batting Square cut.
 Bowling medium pace, Bowling off break.
 Fielding drill, Catching (Short & High).
 Rules & Regulation.
BADMINTON
 Basic introduction about Badminton and Badminton court.
 Racket parts, Racket Grip, Shuttle Grip.
 Basic stance, Basic Footwork, Shadow practice (Full court
movement).
 Strokes services: Forehand- Overhead & Underarm,
Backhand- Overhead & Underarm.
 Match practice (Single & Double).
 Rules & Regulation.
TABLE TENNIS
 Introduction of Table Tennis.
 Basic Stance and Grip (Shake hand & Pen hold).
 Service Basic.
 Stroke: Backhand- Push, Deep Push, Chop, Rally, Drive, Drop
Shot, Flick, Block, Smash.
 Stroke: Forehand- Push, Deep Push, Chop, Rally, Drive, Drop
Shot, Flick, Block, Smash.
 Rules and their interpretations.
 Table Tennis Match (Singles & Doubles).
NCC
 FD-1 General Introduction and words of command.
 FD-2 Attention, Stand at ease and Stand easy, Turning and
inclining at the halt.
 FD-3 Sizing, Forming up in three Ranks Numbering, Open
and Close order March and Dressing.
 FD-4 Saluting at the halt, Getting on parade, Dismissing and
falling out.
Syllabus for B Tech in Mechanical Engineering
34
 FD-5 Marching, Length of pace and Time of Marching in
quick time and Halt, Slow March and Halt.
 FD-7 Turning on the March and Wheeling.
 FD-12 Parade practice.
TAEKWONDO
 Introduction about Taekwondo- Meaning of Taekwondo,
Korean language of dress, Fighting area, Punch, Block, Kicks
etc.
 Stance- Ready stance, Walking stance, Fighting stance, Front
stance, Back stance, Cat stance etc.
 Punch Technique- Front fist punch, Rear fist punch, Double
fist punch, With stance etc. Blocks- Upper blocks, Middle
block, Side block, Suto etc.
 Foot Technique ( Balgisul)- Standing kick (Saseochagi), Front
kick (Abchagi), Doliyo (Chagi), Abdal chagi (Butterfly kick),
Back kick etc.
NSS
 Swachha Bharat Mission
 Free Medical Camp
 Sanitation drive in and around the campus.
 Unnat Bharat Abhiyaan
 Matribhasha Saptah celebration

Syllabus for B Tech in Mechanical Engineering

35
 SECOND SEMESTER

Department of Mathematics
Course Title of the
Program Total Number of contact hours Cred
Code course Core (PCR) / it
Electives Lectu Tutori Practic Tota
(PEL) re (L) al (T) al (P) l
Hou
rs
MAC 02 Mathematics - II PCR 3 1 0 4 4

Pre-requisites Basic concepts of set theory, differential equations and

probability.
Course CO1: Develop the concept of basic linear algebra and matrix equations
Outcomes so as to apply mathematical methods involving arithmetic, algebra,
geometry to solve problems.
CO2: To acquire the basic concepts required to understand, construct,
solve and interpret differential equations.
CO3: Develop the concepts of Laplace transformation & Fourier
transformation with its property to solve ordinary differential
equations with given boundary conditions which are helpful in all
engineering & research work.
CO4: To grasp the basic concepts of probability theory
Topics Elementary algebraic structures: Group, subgroup, ring, subring,
Covered integral domain, and field. (5)
Linear Algebra: Vector space, Subspaces, Linear dependence and
independence of vectors, Linear span, Basis and dimension of a vector
space. Rank of a matrix, Elementary transformations, Matrix inversion,
Solution of system of Linear equations, Eigen values and Eigen vectors,
Cayley-Hamilton Theorem, Diagonalization of matrices.
(15)
Ordinary Differential Equations: Existence and uniqueness of
solutions of ODE (Statement Only), Equations of first order but higher
degree, Clairaut’s equation, Second order differential equations, Linear
dependence of solutions, Wronskian determinant, Method of variation of
parameters, Solution of simultaneous equations. (12)
Fourier series: Basic properties, Dirichlet conditions, Sine series,
Cosine series, Convergence. (4)

Laplace and Fourier Transforms: Laplace transforms, Inverse Laplace

transforms, Convolution theorem, Applications to Ordinary differential
equations. Fourier transforms, Inverse Fourier transform, Fourier sine
and cosine transforms and their inversion, Properties of Fourier
transforms, Convolution. (10)
Probability: Historical development of the subject and basic concepts,
Axiomatic definition of probability, Examples to calculate probability,
Stochastic simulation, Random numbers. Random variables and
probability distributions, Binomial distribution, Normal distribution.
(10)
Text Books, Text Books:
and/or 4. E. Kreyszig, Advanced Engineering Mathematics: 9th edition, Wiley
reference India Edition.
material 5. Gilbert Strang, Linear algebra and its applications (4th Edition),
Syllabus for B Tech in Mechanical Engineering
36
 Thomson (2006).
6. Shepley L. Ross, Differential Equations, 3rd Edition, Wiley Student
Edition.
Reference Books:
1. S. Kumaresan, Linear algebra - A Geometric approach, Prentice Hall
of India (2000).
2. C. Grinstead, J. L. Snell, Introduction to Probability, American
Mathematical Society

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
CSC01 Introduction
PCR 2 1 0 3 3
to Computing
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Basic knowledge of CT+EA
computer. CSC01
assumes no prior
knowledge of
programming.
Course CO1: Recognize the changes in hardware and software technologies
Outcomes with respect to the evolution of computers and describe the
function of system software’s (operating Systems) and application
software’s, languages, number system, logic gates.
CO2: Illustrate the flowchart and inscribe an algorithm for a given
problem Inscribe C programs using operators.
CO3: Develop conditional and iterative statements to write C programs.
CO4: Exercise user defined functions to solve real time problems
CO5: Inscribe C programs that use Pointers to access arrays, strings
and functions.
CO6: Exercise user defined data types including structures and unions
to solve problems..
Topics Fundamentals of Computer: History of Computer, Generation of
Covered Computer, Classification of Computers 2L Basic Anatomy of
Computer System, Primary & Secondary Memory, Processing Unit,
Input & Output devices [2]
Languages: Assembly language, high level language, compiler and
assembler (basic concepts) [1]
Binary & Allied number systems representation of signed and unsigned
numbers. BCD, ASII. Binary Arithmetic & logic gates [2]
Basic concepts of operating systems like MS DOS, MS WINDOW, UNIX,
Algorithm & flow chart [1]
C Fundamentals: The C character set identifiers and keywords, data
type & sizes, variable names, declaration, statements [2]
Operators & Expressions: Arithmetic operators, relational and logical
operators, type, conversion, increment and decrement operators, bit
wise operators, assignment operators and expressions, precedence and
order of evaluation. Input and Output: Standard input and output,

Syllabus for B Tech in Mechanical Engineering

37
 formatted output -- printf, formatted input scanf. [8]
Flow of Control: Statement and blocks, if - else, switch, loops - while,
for do while, break and continue, go to and labels [5]
Fundamentals and Program Structures: Basic of functions, function
types, functions returning values, functions not returning values, auto,
external, static and register Variables, scope rules, recursion, function
prototypes, C pre-processor, command line arguments. [5]
Arrays and Pointers: One dimensional, two dimensional arrays, pointers
and functions, multi-dimensional arrays. [10]
Structures Union and File: Structure, union , structures and functions,
arrays of structures, file read, file write [5]

Text Text Books:

Books, 1. Let us C by Kanetkar
and/or 2. C Programming by Gottfried
reference 3. Introduction to Computing by Balaguruswamy
material 4. The C-programming language by Dennis Ritchie
Reference Books:
1. Computer fundamental and programming in C by P Dey and M.
Ghosh
2. Computer fundamental and programming in C by Reema Thareja
3. programming with C by Schaum Series

Cours Title of the Program Total Number of contact hours Credit

e course Core (PCR) Lectu Tutoria Practic Total
Code / Electives re (L) l (T) al (P) Hours
(PEL)
ECC0 Basic PCR 2 1 0 3 3
1 electronic
s
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: Acquire idea about basic electronic circuit, construction,
Outcomes operation.
CO2: Learn to use these Circuit elements for different applications..
CO3: Learn to analyze the circuits and to find out relation between
input and output.
Topics Semiconductors and its properties. (3)
Covered PN Junction formation and construction of Diode. (5)
Diode circuits as rectifiers, Diode based waveform shaping circuits. (4)
Bipolar Junction Transistor, construction and operation. (4)
BJT Biasing circuits, different types. (3)
Amplifier, Single stage, CE,CB, CC, operation and uses. (4)
Feedback amplifier, advantages & disadvantages, basic closed loop
analysis (3)
Other Semiconductor Devices : Operation and use of LED, JFET, DIAC,
MOSFET(2)
Opamp: Characteristics of ideal operational amplifier Pin Configuration
of IC 741, Analysis of simple operational amplifier circuits: concept of

Syllabus for B Tech in Mechanical Engineering

38
 virtual ground; non-inverting amplifier and inverting amplifier
Applications: voltage follower, summer, differentiator, integrator(6)
Oscillator: Positive feedback and condition of oscillation R-C phase-
shift oscillator, Wien bridge oscillator(3)
Boolean Algebra : Boolean algebra, De Morgan’s theorem,
simplification of Boolean expression, Number system, range extension
of numbers, Different codes: Gray code, ASCII code and different BCD
codes and their uses(4)
Logic Gates : NOT, OR, AND, NOR, NAND, EX-OR, EX-NOR gates
Simplification of logic functions, Realizations of logic expressions using
logic gates(4)
Text Text Books:
Books, 1. Introduction Electronic Devices & Circuit Theory,11/e, 2012,
and/or Pearson: Boylestad & Nashelsky
reference 2. Integrated Electronics: Millman & Halkias
material Reference Books:
1. The Art of Electronics 3e, by Paul Horowitz, Winfield Hill
2. Electronics - Circuits and Systems, Fourth Edition by Owen Bishop
3. Electronics Fundamentals: Circuits, Devices & Applications (8e) by
Thomas L. Floyd & David M. Buchla.
4. Electronic Principles, by Albert Paul Malvino Dr. and David J. Bates
5. Experiments Manual for use with Electronic Principles (Engineering
Technologies & the Trades) by Albert Paul Malvino Dr., David J. Bates,
et al.

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
EEC01 Electrical
PCR 2 1 0 3 3
Technology
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: To learn the fundamentals of Electric Circuits and Network
Outcomes theorems.
CO2: To develop an idea on Magnetic circuits, Electromagnetism
CO3: To learn about single phase and polyphase AC circuits.
CO4: Introduction to single phase transformer.
CO5: Introduction to the transient analysis of RLC circuits with DC
excitation.
Topics Fundamentals of Electric Circuits: Ohm’s laws, Kirchhoff’s laws,
Covered Independent and Dependent sources, Analysis of simple circuits. (3)
Network theorems. (4)
Magnetic field, Concept of magnetic circuits, Magnetomotive Force,
Reluctance, Ampere’s circuital law and Biot-Savart law, Determination
of B/H curve, Comparison of electric and magnetic circuit,
Electromagnetic induction, Faraday’s laws of electromagnetic
induction, Direction and Magnitude of induced E.M.F. (7)
Self and mutual Inductance, Inductances in series and parallel, Energy
stored in inductor, Capacitance, Capacitance in series and parallel,
Relationship between charge, voltage and current, Energy stored in

Syllabus for B Tech in Mechanical Engineering

39
 capacitor (5)
Transients with D.C. excitation. (5)
Generation of alternating voltage and current, E.M.F. equation,
Average and R.M.S. value, Phase and phase difference, Phasor
representation of alternating quantity, Behaviour of A.C. circuits,
Resonance in series and parallel R-L-C circuits (7)
Single-Phase Transformer , equivalent circuits, open circuit and short
circuit tests (6)
Polyphase system, Advantages of 3-phase system, Generation of 3-
phase voltages, Voltage, current and power in a star and delta
connected systems, 3-phase balanced and unbalanced circuits, Power
measurement in 3-phase circuits. (5)
Text Text Books:
Books, 1. Electrical & Electronic Technology by Hughes, Pearson Education
and/or India
reference Reference Books:
material 1. Advanced Electrical Technology by H. Cotton, Reem Publication Pvt.
Ltd
2. Electrical Engineering fundamentals by Vincent Deltoro, Pearson
Education India

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / it
Lectur Tutori Practic Total
Electives
e (L) al (T) al (P) Hour
(PEL)
s

BTC0 LIFE PCR 2 0 0 2 2

1 SCIENCE

Pre-requisites Course Assessment methods (Continuous (CT) and end

assessment (EA))

CT+EA

Course CO1: To be familiarized with the basic cellular organization of

Outcomes organisms and cellular communications.
CO2: To impart an understanding about the basic structure and
functions of the macromolecules and their biosynthesis and
catabolism.
CO3: To give an understanding of the key features of the structure,
growth, physiology and behavior of bacteria, viruses, fungi and
protozoa
CO4: To introduce molecular biology to understand biological processes
in various applications.
CO5: To provide a foundation in immunological processes and an
overview of the interaction between the immune system and
pathogens.
CO6: To provide knowledge about biological and biochemical processes
Syllabus for B Tech in Mechanical Engineering
40
 that require engineering expertise to solve them
Topics 1. Cell Biology (4)
Covered
a) Introduction to life science: prokaryotes & eukaryotes
Definition; Difference
b) Introduction to cells
Define cell, different types of cell
c) Cellular organelles
All organelles and functions in brief
d) Cellular communications
Introduction to basic signaling; endocrine, paracrine signaling;
concepts of receptor, ligand, on-off switch by
phosphorylation/dephosphorylation

2. Biochemistry (4)

a) Biological function of carbohydrate and lipid

Introduction, structure and function
b) Biological function of nucleic acids and protein
Introduction, structure and function
c) Catabolic pathways of Macromolecules
Introduction to catabolism, hydrolysis and condensation
reactions; Catabolism of glucose- Glycolysis, TCA; overall
degradation of proteins and lipids
d) Biosynthesis of Macromolecules
Generation of ATP (ETS), Generation of Glucose (Photosynthesis)

3. Microbiology (5)

a) Types of microorganisms and their general features

Bacteria, Yeast, Fungi, Virus, Protozoa- general introduction with
practical significance and diseases
b) Microbial cell organization
Internal and External features of cell- bacterial cell wall, viral
capsule, pilus etc,
c) Microbial nutritional requirements and growth
Different Sources of energy; growth curve
d) Basic microbial metabolism
Fermentation, Respiration, Sulfur, N2 cycle

4. Immunology (5)

a) Basic concept of innate and adaptive immunity

Immunity-innate and adaptive, differences, components of the
immune system
b) Antigen and antibody interaction
Antigen and antibody, immunogen, factors affecting
immunogenicity, basic antigen-antibody mediated assays,
introduction to monoclonal antibody
c) Functions of B cell
B cell, antibody production, memory generation and principle of

Syllabus for B Tech in Mechanical Engineering

41
 vaccination
d) Role of T cell in cell-mediated immunity
Th and Tc, functions of the T cell with respect to different
pathogen and cancer cell

5. Molecular Biology (5)

a) Prokaryotic Genomes (Genome organization & structure)

Nucleoid, circular or linear
b) Eukaryotic Genomes (Genome organization & structure)
Intron, exon, packaging, chromatin
c) Central Dogma (Replication, Transcription and Translation)
d) Applications of Molecular Biology (Diagnostics, DNA-
fingerprinting, Recombinant products etc.)
Introduction to Recombinant DNA, fingerprinting, cloning

6. Bioprocess Development (5)

a) Microbial growth kinetics

Batch, fed-batch and continuous systems, Monod Equation
b) Enzyme kinetics, including kinetics of enzyme inhibition and
deactivation
Definition of enzymes, activation energy, Concepts of Km, Vmax,
Ki
c) Microbial sterilization techniques and kinetics
Introduction to sterilization, dry and moist sterilization
d) Thermodynamics of biological system
Concepts of Enthalpy, Entropy, favorable reactions, exergonic
and endergonic reactions
e) Material and energy balance for biological reactions
Stoichiometry

Text 1. Biotechnology 01 Edition, authored by U. Satyanarayana, Publisher:

Books, BOOKS & ALLIED (P) LTD.-KOLKATA
and/or 2. Biochemistry by Lehninger. McMillan publishers
reference 3. Microbiology by Pelczar, Chan and Krieg, Tata McGraw Hill
material 4. Brown, T.A., Genetics a Molecular Approach, 4th Ed. Chapman and
Hall, 1992
5. Kuby J, Thomas J. Kindt, Barbara, A. Osborne Immunology, 6th
Edition, Freeman, 2002.
6. Bioprocess Engineering: Basic Concepts (2nd Edition), Shuler and
Kargi, Prentice Hall International.

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectur Tutori Practic Total it

Syllabus for B Tech in Mechanical Engineering

42
 Electives e (L) al (T) al (P) Hour
(PEL) s
Graphical
XES52
Analysis PCR 0 0 2 2 1
Using CAD
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1 Introduction to graphical solution of mechanics problems
Outcomes CO2 Graphical solution of problems related to resultant/equilibrium
in coplanar force system (Imparting knowledge on polar
diagram, funicular polygon)
CO3 Introducing Maxwell diagram and solution of plane trusses by
graphical method
CO4 Determination of centroid of plane figures by graphical method
CO5 Exposure to AutoCAD software for computer aided graphical
solution
Topics  Graphical analysis of problems on statics. [14]
Covered  Graphical solution of engineering problems using CAD (with the
help of "AutoCAD") [14]
Text 1. Engineering Drawing and Graphics – K Venugopal
Books, 2. AutoCAD — George Omura
and/or 3. Practical Geometry and Engineering Graphics – W Abbott
reference
material

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectur Tutori Practic Total it
Electives e (L) al (T) al (P) Hour
(PEL) s
CSS51 Computing
PCR 0 0 2 2 1
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: To understand the principle of operators.
Outcomes CO2: To understand the principle of loops, branching statements
CO3: To understand the working principle of function, recursion
CO5: To understand arrays , pointer, parameter passing techniques
CO6: To detail out the operations of strings
CO7: To understand structure, union
CO7: Application of C-programming to solve various real time
problems
Topics List of Experiments:
Covered Assignments on expression evaluation
Assignments on conditional branching, iterations, pattern matching
Assignments on function, recursion
Assignments on arrays, pointers, parameter passing
Assignments on string using array and pointers
Assignments on structures, union
Text Books, Text Books:

Syllabus for B Tech in Mechanical Engineering

43
 and/or 1. Let us C by Kanetkar
reference 2. C Programming by Gottfried
material 3. Introduction to Computing by Balaguruswamy
4. The C-programming language by Dennis Ritchie
Reference Books:
1. Computer fundamental and programming in C by P Dey and M. Ghosh
2. Computer fundamental and programming in C by Reema Thareja
3. programming with C by Schaum Series

Course Title of the Program Total Number of contact hours Cred

Code course Core (PCR) / Lectur Tutori Practic Total it
Electives e (L) al (T) al (P) Hour
(PEL) s
ECS 51 Basic PCR 0 0 2 2 1
electronics
Lab
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1: Acquire idea about basic electronic components, identification
Outcomes and behavior.
CO2: To determine IV characteristics of these Circuit elements for
different applications.
CO3: Learn to analyze the circuits and observe and relate input and
output signals.
Labs 1. To know your laboratory: To identify and understand the use of
Conducted different electronic and electrical instruments.
. 2. To identify and understand name and related terms of various
electronics components used in electronic circuits: Identify different
terminals of components, fid their values and observe numbering
associate with it.
3. Use of oscilloscope and function generator: Use of oscilloscope to
measure voltage, frequency/time and Lissajous figures of displayed
waveforms.
4. Study of half wave and Full-wave (Bridge) rectifier with and without
capacitor filter circuit.:
5. Realization of basic logic gates: Truth table verification of OR, AND,
NOT, NOT and NAND logic gates from TTL ICs
6. Regulated power supply: To study LM78XX and LM79XX voltage
regulator ICs
7. Transistor as a Switch: To study and perform transistor as a switch
through NOT gate
8. Zenner diode as voltage regulator
9. To study clipping and Clamping circuits
10.To study different biasing cirtis.
11.Study of CE amplifier and observe its frequency response.
Text Text Books:
Books, 1. Experiments Manual for use with Electronic Principles (Engineering
and/or Technologies & the Trades) by Albert Paul Malvino Dr., David J.
reference Bates, et al.
material Reference Books:
1. The Art of Electronics 3e, by Paul Horowitz, Winfield Hill

Syllabus for B Tech in Mechanical Engineering

44
 2. Electronic Principles, by Albert Paul Malvino Dr. and David J. Bates

Title of the Program Total Number of contact hours Cred

Course course Core Lectu Tutori Practic Total it
Code (PCR) / re (L) al (T) al (P) Hou
Electives rs
(PEL)
Electrical
EES51
Technology PCR 0 0 2 2 1
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and
end assessment (EA))
NIL CT+EA
Course CO1: To understand the principle of superposition.
Outcomes CO2: To understand the principle of maximum power transfer
CO3: To understand the characteristics of CFL, incandescent
Lamp, carbon lamp.
CO4: To understand the calibration of energy meter.
CO5: To understand open circuit and short circuit test of single
phase transformer.
CO6: To analyse RLC series and parallel circuits
CO7: To understand three phase connections

Topics Covered List of Experiments:

1.To verify Superposition and Thevenin theorem
2. To verify Norton and Maximum power transfer theorem
3. Characteristics of fluorescent and compact fluorescent lamp
4. Calibration on energy meter
5. To perform the open circuit and short circuit test on single
phase transformer
6. To study the balanced three phase system for star and delta
connected load
7. Characteristics of different types of Incandescent lamps
8. Study of Series and parallel R-L-C circuit
Text Books, Suggested Text Books:
and/or Handbook of Laboratory Experiments in Electronics and Electrical
reference Engineering by A M Zungeru, J M Chuma, H U Ezea
material

Total Number of contact hours

Program
Title of Tota
Course Core (PCR) Cred
the Lectu Tutori Practic l
Code / Electives it
course re (L) al (T) al (P) #
Hou
(PEL)
rs
Syllabus for B Tech in Mechanical Engineering
45
 Co-
curricula
XXS-52 PCR 0 0 2 2 1
r
Activities
Pre- Course assessment methods: (Continuous evaluation( (CE) and end
requisite assessment (EA)
s
NIL CE + EA
Course  CO1: Social Interaction: Through the medium of sports
Outcome  CO2: Ethics: Recognize different value systems including
s your own, understand the moral dimensions of your
decisions, and accept responsibility for them
 CO3: Self-directed and Life-long Learning: Acquire the ability
to engage in independent and life-long learning in the
broadest context socio-technological changes.
 CO4: Personality development through community
engagement
 CO5: Exposure to social service
Topics YOGA
Covered  Sitting Posture/Asanas- Gomukhasana, Swastikasana,
Siddhasana, Ustrasana, Janusirsasana, Ardha
Matsyendrasana (Half-Spinal Twist Pose),
Paschimottanasana, Shashankasana, Bhadrasana.
 Mudra- Vayu, Shunya, Prithvi, Varuna, Apana, Hridaya,
Bhairav mudra.
 Laying Posture/Asanas- Shalabhasana (Locust Posture),
Dhanurasana (Bow Posture), Ardha Halasana (Half Plough
Pose), Sarvangasana (Shoulder Stand), Halasana (Plough
Pose), Matsyasana, Supta Vajrasana, Chakrasana (Wheel
Posture), Naukasana (Boat Posture), Shavasana (Relaxing
Pose), Makaraasana.
 Meditation- ‘Om’meditation, Kundalini Or Chakra Meditation,
Mantrameditation.
 Standing Posture/Asanas- Ardha Chakrsana (Half Wheel
Posture), Trikonasana (Triangle Posture), Parshwa Konasana
(Side Angle Posture), Padahastasana, Vrikshasana (Tree
Pose), Garudasana (Eagle Pose).
 Pranayama- Nadi sodha, Shitali, Ujjayi, Bhastrika, Bhramari.
 Bandha- Uddiyana Bandha, Mula Bandha, Jalandhara
Bandha, Maha Bandha.
 Kriya- Kapalabhati, Trataka, Nauli.
ATHLETICS
 Long Jump- Hitch kick, Paddling, Approach run, Take off,
Velocity, Techniques, Flight & Landing
 Discus throw, Javelin throw and Shot-put- Basic skill &
Technique, Grip, Stance, Release & Follow through.
 Field events marking.
 General Rules of Track & Field Events.
BASKETBALL
 Shooting- Layup shot, Set shot, Hook shot, Jump shot. Free
throw.

Syllabus for B Tech in Mechanical Engineering

46
 Rebounding- Defensive rebound, Offensive rebound.
Individual Defensive- Guarding the man without ball and
with ball.
 Pivoting.
 Rules of Basketball.
 Basketball game.
VOLLEYBALL
 Spike- Straight spike, Body turn spike, Tip spike, Back
attack, Slide spike, Wipe out spike.
 Block- Single block, Double block, Triple block, Group block.
 Field Defense- Dig pass, Double pass, Roll pass.
 Rules and their interpretation.
FOOTBALL
 Dribbling- Square pass, Parallel pass, Forward pass.
 Heading (Standing & Running)- Fore head, Side fore head,
Drop heading, Body covering during heading.
 Kicking- Full volley, Half volley, Drop kick, Back volley, Side
volley, Chiping (lobe).
 Tackling: Covering the angle, Chessing time sliding chese,
Heading time shoulder tackle etc.
 Feinting- Body movement to misbalance the opponent and
find space to go with ball.
 Rules of Football.
CRICKET
 Batting straight drive.
 Batting pull shot.
 Batting hook shot.
 Bowling good length, In swing.
 Bowling out swing, Leg break, Goggle.
 Fielding drill.
 Catching (Long & Slip).
 Wicket keeping technique.
 Rules & Regulation.
BADMINTON
 Net play- Tumbling net shot, Net Kill, and Net Lift.
 Smashing.
 Defensive high clear/Lob.
 Half court toss practice, Cross court toss drop practice, Full
court Game practice.
 Player Positioning, Placements.
 Rules & Regulation.
 Doubles & Mixed doubles match practice.
TABLE TENNIS
 Stroke: Backhand- Topspin against push ball, Topspin
against deep ball, Topspin against rally ball, Topspin against
topspin.
 Stroke: Forehand- Topspin against push ball, Topspin against
deep ball, Topspin against rally ball, Topspin against topspin.
 Stroke- Backhand lob with rally, Backhand lob with sidespin,
Forehand lob with rally, Forehand lob with sidespin.
 Service: Backhand/Forehand- Push service, Deep push
service, Rally service.
 Service: Backhand sidespin (Left to right & Right to left).
 Service: Forehand- High toss backspin service, High toss
Syllabus for B Tech in Mechanical Engineering
47
 sidespin service, High toss reverse spin service.
 Rules and their interpretations.
 Table Tennis Match (Singles & Doubles).
NCC
 FD-6 Side pace, Pace Forward and to the Rear.
 FD-7 Turning on the March and Wheeling.
 FD-8 Saluting on the March.
 FD-9 Marking time, Forward March and Halt in Quick Time.
 FD-10 Changing step.
 FD-11 Formation of Squad and Squad Drill.
 FD-12 Parade practice.
TAEKWONDO
 Poomsae (Forms)- Jang, Yi Jang.
 Self Defense Technique- Self defense from arms, Fist and
Punch.
 Sparring (Kyorugi)- One step sparring, Two step sparring,
Fight (Free sparring).
 Combination Technique- Combined kick and punch.
 Board Breaking (Kyokpa)- Sheet breaking.
 Interpretation Rules above Technique of Taekwondo.
NSS
 No Smoking Campaign
 Anti- Terrorism Day Celebration
 Any other observation/celebration proposed by
Ministry/institute
 Public Speaking
 Discussion on Current Affairs
 Viva voce

CO-PO Mapping and Matrix

Course COs PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 1 2 - - - - 1 - - -
CO2 3 3 1 2 - - - - 1 - - -
MAC01
CO3 3 3 1 2 - - - - 1 - 1 1
CO4 3 - - 2 - 2 - - 1 - - -
CO1 3 2 1 1 1 - - 1 - - - 1
CO2 3 2 - 2 - - - - - - - 1
PHC01
CO3 3 2 2 2 1 1 1 1 1 - 1 1
CO4 3 2 2 2 1 1 1 - 1 - 1 1
CO1 1 2 - - - - - - - - - -
CO2 1 - - - - - 2 - - - - -
CYC01
CO3 1 2 1 1 1 - - - - - - -
CO4 - 1 - - 2 - 1 - - - - -
CO1 1 - - - - - - - - - - 1
CO2 1 1 1 1 - - - - - - - 1
XEC01 CO3 1 1 - - - - - - - - - 1
CO4 1 2 - - - - - - - - - 1
CO5 - 2 2 2 2 1 - - - 1 - 1
Syllabus for B Tech in Mechanical Engineering
48
 CO1 3 - - - - - 2 - - - - -
CO2 1 - - - - - 2 - - - - -
ESC01
CO3 2 - - - - - 2 - - - - -
CO4 1 - 3 - - 2 1 - - - - -
CO1 1 - - - - - - - - - - -
XES51 CO2 1 1 - - - - - - - - - -
CO3 1 - 1 - - - - - - - - -
CO1 - - - - - 1 - - 1 3 - 3
HSS51
CO2 - - - - - 2 - - 2 3 - 3
CO1 3 2 1 - - - - - 2 1 - 1
CO2 3 2 1 - - 1 - - 2 1 - 1
PHS51 CO3 3 1 - - - - - - 2 1 - 1
CO4 3 2 - 1 - 1 1 - 2 1 - 1
CO5 3 2 1 - 1 1 1 - 2 1 - 1
CO1 2 1 - 1 - - - - - - - -
CO2 - 1 - 1 1 2 - - - - - -
CYS51
CO3 2 - - 1 1 - - - - - - -
CO4 - 1 - 1 1 - - - - - - -
CO1 2 - - - - 1 - - - 1 - -
CO2 1 - 1 - - 1 - - - 1 - -
WSS51
CO3 1 - 2 - - 1 - - - 1 - -
CO4 1 - - - - 2 - - - 1 - -
CO1 2 3 1 3 - - - - 2 - - -
CO2 2 3 1 2 - - - - 2 - - -
MAC02
CO3 2 2 2 3 2 - - - 3 - 1 1
CO4 2 3 2 3 2 1 1 - 2 - - -
CO1 3 1 2 1 - - - - - - - -
CO2 - 2 1 2 1 - - - - - - -
CO3 1 2 - - 3 - - - - - - -
CSC01
CO4 1 3 1 2 3 - - - - - - 1
CO5 2 1 - - 3 - - - - - - -
CO6 2 - 3 - 1 - - - - - - -
CO1 - - - - - - - - - - - -
CO2 - - - - - - - - - - - -
ECC01
CO3
CO4 - - - - - - - - - - - -
CO1 3 1 - - 2 - - - - 1 - -
CO2 2 3 2 - 2 - - - - - - -
EEC01 CO3 2 3 1 - - - - - - 1 - -
CO4 3 1 2 - 1 - - - - - - -
CO5 3 1 2 - 1 - - - - - - -
CO1 2 1 1 - 1 - - - - - - -
CO2 2 1 1 - 1 - 1 - - - - -
BTC01 CO3 2 1 1 - 1 - - - - - - -
CO4 2 1 1 - 1 - - 1 - - - 1
CO5 2 1 1 - 1 1 1 - - - - -
CO1 2 - - - - - - - - - - -
XES52
CO2 1 2 - - - - - - - - - -

Syllabus for B Tech in Mechanical Engineering

49
 CO3 2 1 - - - - - - - - - -
CO4 2 1 - - - - - - - - - -
CO5 1 - - - 2 - - - - - - -
CO1 3 - 1 - - - - - - - - -
CO2 - 2 1 3 - - - - - - - -
CSS51
CO3 - 1 - 2 1 - - - - - - -
CO4 - - 3 2 - - 1 - - - 2 -
CO1 3 2 1 2 2 1 - - 2 - - -
ECS51 CO2 3 2 2 2 3 - - - 2 - - -
CO3 3 3 2 2 - - - - 2 - - -
CO1 3 - 2 - 3 - - - 1 - - -
CO2 3 - 2 - 3 - - - 1 - - -
CO3 2 3 2 2 1 - 2 - 1 - - -
EES51
CO4 2 3 1 2 2 - 1 - 1 1 - -
CO5 2 3 1 2 2 - - - 1 - - -
CO6 2 3 2 2 2 - - - 1 - - -
CO1 - - - - - 2 - - 3 - - -
CO2 - - - - - - - 2 - - - -
XXS51 CO3 - - - - - - 1 - - - - 3
CO4 - - - - - - - - 2 2 - -
CO5 - - - - - 3 1 - - - - -
CO1 - - - - - 2 - - 3 - - -
CO2 - - - - - - - 2 - - - -
XXS51 CO3 - - - - - - 1 - - - - 3
CO4 - - - - - - - - 2 2 - -
CO5 - - - - - 3 1 - - - - -

Department of Mathematics

Course Title of the course Program Core Total Number of contact hours Credit
Code (PCR) /
Electives Lecture Tutorial Practical Total
(PEL) (L) (T) (P) Hours
MAC331 Mathematics-III PCR 3 1 0 4 4

Pre-requisites Basic knowledge of topics included in MAC01 & MAC02

Course CO1: Acquire the idea about mathematical formulations of phenomena in physics and
Outcomes engineering.
CO2: To understand the common numerical methods to obtain the approximate solutions
for the intractable mathematical problems.
CO3: To understand the basics of complex analysis and its role in modern mathematics and
applied contexts.
CO4: To understand the optimization methods and algorithms developed for solving
various types of optimization problems.
Topics
Covered Partial Differential Equations (PDE): Formation of PDEs; Lagrange method for
solution of first order quasilinear PDE; Charpit method for first order nonlinear PDE;
Homogenous and Nonhomogeneous linear PDE with constant coefficients: Complimentary
Function, Particular integral; Classification of second order linear PDE and canonical
Syllabus for B Tech in Mechanical Engineering
50
 forms; Initial & Boundary Value Problems involving one dimensional wave equation, one
dimensional heat equation and two dimensional Laplace equation.
[14]
Numerical Methods: Significant digits, Errors; Difference operators; Newton's Forward,
Backward and Lagrange’s interpolation formulae; Numerical solutions of nonlinear
algebraic/transcendental equations by Bisection and Newton-Raphson methods; Trapezoidal
and Simpson’s 1/3 rule for numerical integration; Euler’s method and modified Eular's
methods for solving first order differential equations. [14]

Complex Analysis: Functions of complex variable, Limit, Continuity and Derivative;

Analytic function; Harmonic function; Conformal transformation and Bilinear
transformation; Complex integration; Cauchy’s integral theorem; Cauchy’s integral
formula; Taylor’s theorem, Laurent’s theorem (Statement only); Singular points and
residues; Cauchy’s residue theorem. [17]

Optimization:
Mathematical Preliminaries: Hyperplanes and Linear Varieties; Convex Sets, Polytopes
and Polyhedra.
[2]
Linear Programming Problem (LPP): Introduction; Formulation of linear programming
problem (LPP); Graphical method for its solution; Standard form of LPP; Basic feasible
solutions; Simplex Method for solving LPP. [9]

Text Books, Text Books:

and/or 1. An Elementary Course in Partial Differential Equations-T. Amarnath
reference 2. Numerical Methods for scientific & Engineering Computation- M.K.Jain,
material S.R.K. Iyengar & R.K.Jain.
3. Foundations of Complex Analysis- S. Ponnuswami
4. Operations Research Principles and Practices- Ravindran, Phillips, Solberg
5. Advanced Engineering Mathematics- E. Kreyszig
Reference Books:
1. Complex Analysis-L. V. Ahfors
2. Elements of partial differential equations- I. N. Sneddon
3. Operations Research- H. A. Taha

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Solid PCR 3 1 0 4 4
301 Mechanics
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Basic knowledge on CT+EA
Engineering Mechanics
Course CO1 Knowledge on the analysis of stress, strains, elasticity properties
Outcomes of materials, strain energy principles
CO2 Exposure towards members subjected to shear force, bending
moments, flexure loads, torsional loads
CO3 Idea about analyzing deflection of beams

Syllabus for B Tech in Mechanical Engineering

51
 CO4 Acquire the fundamentals about members subjected to
compressive loads.

Topics Introduction to stress and strains, Generalized Hooke’s Law,

Covered Relationship among different elastic coefficients.
4
Theory of Bending, Shearing Forces and Bending Moments in beams,
SF and BM Diagrams.
6
Bending Stresses in Beams, Flexural rigidity, Section Modulus, Shear
Flow,
Shear Centre.
6
Deflection of Beams: Double-Integration method, Area-Moment method;
Propped cantilever and Fixed beams.
6
Statically indeterminate beam problems.
4
Torsion of Circular shafts.
4
Analysis of bi-axial stress and Mohr’s Circle.
6
Combined Loading and Theories of Failure.
4
Columns: Buckling of columns, Euler’s formula for stability of column.
6
Stresses in Thin Cylinder
2
Strain Energy methods – Castigliano’s Theorem.
4
Text Text Books:
Books, 1. Strength of Materials: Part I, II, S. Timoshenko, CBS Publishers,
and/or 1985.
reference 2. Engineering Mechanics of Solids, E. P. Popov, PHI, 1993.
material
Reference Books:
1. Introduction to Solid Mechanics, I. H. Shames and J. M. Pittariesi,
PHI, 2003.
2. Strength of Materials, F. L. Singer and A. Pytel, Harper Collins
Publishers, 1991

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Theory of PCR) 3 1 0 4 4
302 Machines &
Mechanisms
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Syllabus for B Tech in Mechanical Engineering
52
Mechanics CT+EA
Course CO1 Knowledge of dynamics of elementary mechanisms and
Outcomes machines
CO2 Knowledge of the fundamental of machine design

Topics Introduction to Mechanisms

Covered Linkages, Mechanisms and machines; Kinematic pair, element, chains
and inversions; degrees of freedom, mobility and Gruebler‘s criterion;
four bar mechanisms and slidercrank mechanisms Special Mechanisms
- Indicator Diagram Mechanisms, Steering Mechanism, Hookes Joint
4
Kinematics of Rigid Bodies Frame of reference in general motion,
General plane motion, absolute and relative velocity in plane motion,
Instantaneous center of rotation in plane motion
3
Kinetics of Rigid Bodies in 3D Plane motion of rigid bodies: Force
and accelerations methods, Energy and momentum methods
3
Kinematic Analysis of Planar Linkages Position & displacement
analysis, Velocity analysis, Acceleration analysis
9
Gears& Gear trains: Fundamental law of gearing, gear tooth
terminology, gear type, contact ratio & Kinematics analysis,
Kinematic analysis of Gear trains: Velocity ratio and sense of
rotation; simple, compound and epicyclic gear trains 7
Cam Mechanisms: Cam terminology, displacement diagram, graphical
layout of cam profile.
2
Kinematic Synthesis of Planar Linkages: Type, number and
dimensional synthesis, Body guidance, path and function generation,
Analytical linkage synthesis 4
Computer Aided Mechanism Analysis
1
Dynamic Force Analysis of Machines Dynamic force analysis for slider
crank mechanism; inertia forces in reciprocating parts; primary and
secondary inertia forces; simple engine mechanism – gas force, piston
effort, gudgeon pin load, crank effort or turning moment; single
and double acting engine; inertia force analysis
considering mass of the connecting rod; force analysis for a four bar
mechanism 6
Flywheels: Turning moment diagram, indicator diagrams – mean
effective pressures for suction, compression, expansion and exhaust
strokes; overall mean effective pressure for the cycle; mean
resisting torque; fluctuation of energy and speed; flywheel
6
Governor Mechanisms: Types, characteristics of centrifugal governors;
conical pendulum type governors – Watt, Porter, and Proell; Spring
loaded type of governors – Hartnell; controlling force, effort, power,
sensitiveness, isochronism, stability and hunting of governors
5
Text Text Books:
Books, 1. Theory of Machines and Mechanisms, Uicker J.J., Pennock G.R.,

Syllabus for B Tech in Mechanical Engineering

53
and/or Shigley J.E.
reference 2. Theory of Mechanisms and Machines, Ghosh A., Mallik A.K.
material
Reference Books:
1. Introduction to the mechanics of machines, Morrison J.L.M.,
Crossland B.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Fluid PCR 3 1 0 4 4
303 Mechanics
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Nil CT+EA
Course CO1 Fundamental of Engineering fluid mechanics
Outcomes
Topics I. Introduction:
Covered 08
Definition of fluid; Concept of continuum and Knudsen number;
Concept of velocity, pressure and stress fields; Stress tensor; Fluid
properties; Slip and no-slip; Compressibility and bulk modulus;
Vapour pressure; Surface tension; Capillary rise and depression.
II. Kinematics of flow and flow measurements:
08
Definition of flow field; Lagrangian and Eulerian description of fluid
motion; Substantial derivative; Reynold’s Transport Theorem; Integral
form of conservation equations of fluid motion; Acceleration field;
Pathline, streamsline, streakline, timeline and stream tube; Pure
translation, rotation and linear and angular deformation of fluid
element; angular velocity; vorticity and circulation; Free and forced
vortex flows; Euler’s equation along streamline; Bernoulli’s Equation;
Static, stagnation and dynamic pressures: Application of Bernoulli’s
Equation.
III. Differential analysis of fluid motions: Differential control volume:
08
Conservation of mass; conservation of momentum; Stokes’s
hypothesis; Navier-Stokes equation; Euler’s equation of motion of
an ideal fluid; Exact solutions of NS equations for steady
incompressible flow: plane Poiseuille flow, Couette Flow, falling film
flow,.
IV. Incompressible Flow through pipes and ducts:
06
Hagen-Poiseuille flow, Darcy Wesibach Equation, Major and minor
losses, Surge control;
V. Dimensional Analysis:
04
Measurement and dimension; Variables and functions; Dimensional
homogeneity; Pi Theorem; Dimensionless parameters; Scaling rules,

Syllabus for B Tech in Mechanical Engineering

54
 dimensionless numbers; Similitude; Similarity solutions and
transformations; Geometric and dynamic similitude.
VI. Boundary layer flows:
06
Boundary layer concepts; Prandtl’s boundary layer equations; Blasius
Equation for flow over a flat plate; Momentum integral equations for
boundary layers; Wall shear stress; Separation of boundary layers;
Fluid flows about immersed bodies.
VII. Potential flow:
06
Irrotational flow; Velocity potential and stream function; Stream
function for two-dimensional incompressible flow; Laplace equation;
Method of solution; Complex potential for fundamental flows;
Superposition of elementary flows; Flow about a half body; Uniform
flow past a source and a sink, a doublet, and a cylinder with circulation;
Aerofoil theory.
VIII. Compressible flow:
06
Propagation of sound wave; Types of flow regimes: Mach cone;
Stagnation and critical states; Isentropic flow of an ideal gas: area
variation; Isentropic flow in converging and converging-diverging
nozzle; normal shock.
Text Text Books:
Books, 1. Introduction to Fluid Mechanics: Fox
and/or 2. Fluid Mechanics: Munson and Okiish
reference 3. Fluid Mechanics: Robert Granger
material Reference Books:
1. Fluid Mechanics: Frank M. White
2. Mechanics of Fluids: B. S. Massey

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lectur Tutorial Practic Total t
Electives e (L) (T) al (P) Hour
(PEL) s
MEC Engineering PCR 3 0 0 3 3
304 Thermodynami
cs
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Nil CT+EA
Course CO1 Knowledge of thermo-dynamical system
Outcomes CO2 Mastering laws of thermodynamics
CO3 Study of air standard thermodynamic cycles
CO4 Properties of pure substance
CO5 Thermodynamic relations

Topics Reynolds transport theorem based reformulations of conservation

Covered principles 2
PVT and non-PVT equation of states, Important slopes and projections.
Syllabus for B Tech in Mechanical Engineering
55
 2
Zeroth law of thermodynamics: Concept of temperature
1
First law of thermodynamics: Concept of heat, work and energy
2
Second law of thermodynamics: Concept of Entropy
2
Gouy-Stodola theorem: Exergy analysis, Some aspects of entropy
generation
minimization
1
Third law of thermodynamics: Nernst heat theorem
1
Thermodynamic relations: Partial derivatives, Maxwell relations,
Thermodynamic mnemonic diagram
2
Applications of SFEE
1
Heat engine, heat pump and refrigerators. First and second law based
performances
2
Air standard cycles: Carnot, reversed Carnot, Otto, Diesel, dual, Joule-
Brayton,
reversed Joule-Brayton
5
Properties of pure substances: Steam table, Mollier diagram, P-h chart
6
Vapour power cycles: Rankine, reheat, regenerative, binary vapour
cycles 6
Reciprocating air compressor: Single stage air compressor,
isothermal efficiency, clearance and clearance volume, volumetric
efficiency, two stage and multistage compression, Intercooler, heat
rejected per kg. air, indicator diagram, mean effective pressure,
Mechanical efficiency
4
Rotary compressor: Roots blower, vane type blower, rotary
dynamic compressor, centrifugal compressor. Momentum principles
and Euler’s equation for energy transfer. Static and total head
quantities, velocity diagrams 3
Text Text Books:
Books, 1. M. J. Moran, H. N. Shapiro, Fundamentals of Engineering
and/or Thermodynamics, Wiley.
reference 2. R. E. Sonntag, C. Borgnakke, G. J. Van Wylen, Fundamentals of
material
Thermodynamics, Wiley.
3. P. K. Nag, Engineering Thermodynamics, McGraw-Hill.
4. D. K. Kondepudi, I. Prigogine, Modern Thermodynamics, Wiley.
5. J. F. Lee, F. W. Sears, Thermodynamics, Addison Wesely

Reference Books:
1. E. P. Gyftopoulos, G. P. Beretta, Thermodynamics: Foundations and
Applications, Dover.
2. A. Thess, The Entropy Principle, Springer.

Syllabus for B Tech in Mechanical Engineering

56
 Department of Physics
Offered for Department of Mechanical Engineering
Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
PHC33 Physics of PCR 3 0 0 3 3
3 Engineering
Materials
Course CO1: To understand fundamental theory of metal
Outcomes CO2: To comprehend theory and device applications of semiconductor
materials
CO3: To be familiar with fundamental of laser and its applications.
CO4: To know about the super conductivity, dielectric and mechanical
properties of material

Topics Electron Theory of Metals Fermi-Dirac Statistics and Fermi energy,

Covered Density of states, Concept of density of states in nanomaterials,
Electrical conduction in metals and alloys, Current density, Drift
velocity, Mobility etc., Classical electron theory of metal (Drude-
Lorentz Theory), Quantum mechanical consideration (Sommerfeld
Model). Origin of band gap (Kronig-Penny Model), Brillouin zone,
Resistivity of pure metals and alloys, Electronic specific heat of metals,
Thermal conductivity of metals, Factors affecting electrical
conductivity, Resistivity of pure metals and alloys, Solders, Soft and
hard and the use of fluxes and their classifications. [12L]
Semiconductors Intrinsic and extrinsic semiconductors, Fermi level,
Calculation of number density of carriers and their temperature
dependence, Conductivity, Mobility and its temperature dependence,
Hall effect. Compound semiconductors, Direct and indirect bandgap
semiconductors. Applications of semiconductor material;
Semiconductor devices, p-n diode, Zener diode, Tunnel diode, Solar
cell. Semiconductor device fabrication (Mention only techniques).
Double hetrostructure LED (ILED). [10L] Materials for Optical
Applications Optical materials for Light Emitting Diode, Laser- Solid-
state lasers, Liquid & Gas lasers. Semiconductor Laser, Band diagram,
Pumping mechanism, Operation. Examples of nonlinear optical
materials [4L] Superconductors Superconductivity; Electrical &
magnetic properties of superconducting materials, Zero resistance
property, Meissner effect, A.C. resistance, BCS Theory (Qualitative),
Josephson’s junction, Engineering applications of superconducting
materials. [5L] Dielectrics Definitions, The local field, The Clauius-
Mossoti relation, Sources of polarizability, Dipolar polarizability, Debye
equation and study of molecular structure, Electronic polarizability,
Ionic polarizability (Brief), Measurement of dielectric constant,
Electrets, Piezoelectricity, Ferroelectricity and comparison with
piezoelectricity, Applications of ferroelectric materials. [5L] Mechanical
Beheviour of Materials Bonding of solids, Crystal structure, Crystal
imperfections, Estimation of theoretical strength, Introduction of stress
and strain, Hookeʼs law, elasticity, plasticity, Fracture of materials,
(Fracture, Fatigue, Creep), Strengthening mechanism, Composites. [6L]

Syllabus for B Tech in Mechanical Engineering

57
Text TEXT BOOKS: 1. Introduction to Modern Physics, H. S. Mani & G. K.
Books, Mehta 2. Solid State Electronic Devices, B. G. Streetman 3.
and/or Solid State Physics, S. O. Pillai
reference REFERENCE BOOKS: 1. Introduction to Solid State Physics, C. Kittel
material 2. Introduction to Materials Science for Engineers, J. F.
Shackelford & M. K. Muralidhara 3. Electronic Properties of
Metals, E. Hamuel

Department of Physics
Offered for Department of Mechanical Engineering
Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
PHC38 Physics of PCR 0 0 3 3 2
3 Engineering
Materials
Laboratory
Course CO1: To realize and apply different techniques for measuring
Outcomes characteristics of p-n junction and application of Zener diode as
voltage regulator.
CO2: To determine the properties (carrier concentration and type) of
semiconductor by Hall-effect experiments.
CO3: To apply the knowledge to determine the properties (bandgap and
resistivity) of semiconductor materials by four-probe method at
different temperatures.
CO4: To determine the characteristics of solar cell.
CO5: To determine the physical parameter such as e/m of an electron
and Stefan’s constant.
Topics 1. Determination of Stefan’s constant.
Covered 2. Study of Hall voltage and Hall coefficient of a given material.
3. Measurement of electrical conductivity of a semiconductor.
4. To determine the energy bandgap of a semiconductor.
5. To study the variation of thermo emf of a thermo-couple with
temperature and determine its thermo-electric power.
6. Determination of power conversion efficiency of a solar cell.
7. To study the quantization of energy (Frank Hertz Experiment).
8. To determine the value of e/m of an electron by using a cathode
ray tube and a pair of bar magnet.
Text Suggested Books:
Books, A Text Book on Practical Physics – K. G. Majumdar.
and/or Practical Physics – Worsnop and Flint
reference
material
Department of Mechanical Engineering
Course Title of the Program Total Number of contact hours
Code course Core (PCR) / Lecture Tutorial Practic Total
Electives (L) (T) al (P) Hour
(PEL) s
MEC Design of PCR 3 1 0 4 4
401 Machine
Elements

Syllabus for B Tech in Mechanical Engineering

58
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 301 (Solid CT+EA
Mechanics)
Course CO1 Acquire an idea about engineering materials in machine design
Outcomes CO2 To learn the basic design procedure for different elementary
machine elements
CO3 To learn about design of bolt and welded joints, pressure vessels
etc.
CO4 Introduction to fatigue design

Topics Review of stress analysis, Theories of failure, Machine Design in

Covered continuation of strength of materials.
5
Fundamentals of machine design - General Principles and
Procedures of design of machine elements, Factor of safety and
Service Factor Mechanical properties of Engineering Materials
3
Design under Static load: C-frames and Crane hooks
4
Design under variable loading and Impact loading
5
Design of Shaft under Torsion, Bending, Axial load and Combined
loads, Design of Shafts under fatigue load.
10
Design of Keys, Splines, Rigid and flexible couplings
5
Design of Bolted joints
4
Design of Welded joints
4
Analysis and Design of thick cylinders and pressure vessels
5
Springs: Stress analysis and Design of Helical and Leaf springs.
4
Design of Connecting rods.
3

Text Text Books:

Books, 1. Mechanical Engineering Design – J.E. Shigley
and/or 2. Design of Machine Elements – M.F. Spotts
reference 3. Design of Machine Elements – V.B. Bhandari
material
Reference Books:
Machine Design – Black and Adams

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour

Syllabus for B Tech in Mechanical Engineering

59
 (PEL) s
MEC Casting, PCR 3 1 0 4 4
402 Forming and
Welding
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1. Learn different types of casting process.
Outcomes CO2. Select suitable manufacturing process for typical components.
CO3. Learn the various welding process.
CO4. Explain the concept of forging, rolling process and drawing.
Topics Casting (20 hrs)
Covered Foundry: foundry materials- moulding and core sand- binders – additives; sand
preparation- sand control tests 2
pattern and pattern making 3
mould and core making, expendable and non-expendable moulds, 3
mould assembly; solidification of pure metals and alloys, grain growth. 1
Casting processes- sand casting, shell moulding, investment casting, slush casting, gravity
and pressure die casting, centrifugal casting; continuous casting 5
casting design, gateway system design, riser design 3
casting defects- inspection, testing- destructive and non-destructive. 3
Welding (18 hrs)
Metal joining- classification, welding heat sources, 1
arc welding machines, arc production, arc characteristics, metal transfer,
welding electrode, 5
resistance welding, thermit welding, soldering and brazing, 2
gas welding, 3
Welding metallurgy, weldability of ferrous and nonferrous metals, 1
Welding defects , testing of welded joints 3
Other nonconventional welding methods like, ultrasonic welding, electron beam welding,
laser beam welding etc. 3
Forming (18 hrs)
Metal forming- cold, warm and hot working.
Forging: processes and its classification- drop forging and press forging, open die,
impression die, closed die and precision forging processes.
grain flow in a forged product, 4
Specific forging operations like, coining, piercing, hubbing, heading, Swaging, roll forging,
orbital forging, incremental and isothermal forging. 2
Forging defects. 1
Rolling: Strip rolling- recrystallisation and process details, Rolling mills, ring rolling, gear
and thread rolling, various rolled sections, defects in rolled products. 5
Drawing: drawing terms and their definitions, circular drawing die, rod and wire
and tube drawing. 4
Extrusion: processes- direct and indirect extrusion, impact and hydrostatic extrusion,
metal extrusion practice, metal flow during extrusion. 2

Text Text Books:

Books, 1. Manufacturing Processes for Engg. Materials - Kalpakjian
and/or 2. Production Technology (vol I & II)—R. K. Jain and S.C. Gupta
reference 3. Manufacturing Processes: H. S. Shan, Vol. 1
material
4. A textbook of Production Technology – P. C. Sharma

Reference Books:

Syllabus for B Tech in Mechanical Engineering

60
 1. Manufacturing Science-- A. Ghosh, A.K.Mallik
2. Principles of Foundry Technology-- P.L.Jain

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Heat and PCR 3 0 0 3 3
403 Mass
Transfer
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304 (Engineering CT+EA
Thermodynamics)
Course CO1 Relation of thermodynamics and heat transfer
Outcomes CO2 Knowledge of Conduction mode of heat transfer
CO3 Knowledge of Convection mode of heat transfer
CO4 Knowledge of radiation mode of heat transfer
CO5 Heat and mass transfer equipment’s

Topics Introduction, basic concepts and modes; relationship to

Covered thermodynamics. 1
Conduction: Mechanism; Fourier law of heat conduction in 3-D, 1-D
steady state conduction with heat generation, composite plane wall,
cylinders and spheres, thermal resistance network. Critical thickness of
insulation; Use of analytical, numerical and graphical methods,
thermal diffusivity, Fourier number, Heat Transfer from extended
surface 12
Conservation principles: various conservation equations, Relation
between system and control volume approach: Reynolds Transport
Theorem, Entropy generation minimization as a general heat transfer
objective, Basic convective configurations, Fluid flow and heat transfer
aspect of internal flow, Fluid flow and heat transfer aspect of external
flow, Visualization of convection, Flow over a flat plate, Concept of
thermal and hydrodynamic boundary layers, Laminar and turbulent
boundary layers, Scaling analysis, Natural, forced, mixed and turbulent
convection, Dimensional analysis in correlations for convective heat
transfer, Relation between fluid friction and heat transfer, Analysis
of heat exchanger: LMTD, effectiveness-NTU method, Boiling and
condensation mechanisms, Discrimination between diffusive and
convective mass transfer, Fick’s law of diffusion.
16
Radiation: physical mechanism, radiation properties, black body
radiation, grey body, spectral dependence of radiation properties,
Wien’s displacement law, Kirchoff’s law. Shape factor, heat exchange
between infinite parallel planes, and Gray bodies; radiation
shields, network representation. 7
Mass Transfer: Diffusive and Convective mass transfer, Evaporation

Syllabus for B Tech in Mechanical Engineering

61
 process in the atmosphere, Fick’s law and its applications.
6
Text Text Books:
Books, 1. Heat Transfer-- J. P. Holman
and/or 2. Principles of Heat and Mass Transfer—F. P. Incropera, D. P.
reference DeWitt, T.L. Bergan
material
3. A Heat Transfer Text Book, Dover - John H. Lienhard V, John H.
Lienhard IV

Reference Books:
1. Heat and Mass Transfer- Y. A. Cengel, A.J. Ghajar

Department of Electrical Engineering

OFFERED FOR ME DEPARTMENT
Course Title of the course Program Core Total Number of contact hours Credit
Code (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P)# Hours
EEC432 Electrical
PCR 3 0 0 3 3
Machines
Pre-requisites Course Assessment methods (Continuous evaluation (CE) and end
assessment (EA))
EEC01(ELECTRICAL CE+EA
TECHNOLOGY)
Course CO1: Theory of electromechanical energy conversion, the concepts of voltage generation
Outcomes and fundamental torque equation.
CO2: Basic understanding of the principles of operation and construction of direct and
alternating current machines and transformers.
CO3: A study of theory and concept of Electric Machines (AC & DC).
CO4: Deriving equivalent circuit of electrical machines.
CO5: Studying the performance and characteristics of Electrical machines (AC & DC).
Topics Basic principle of Faraday’s law of electro-magnetic induction, energy conversion and
Covered magnetic circuit. (4)
Transformer: Construction and principle of operation of single phase transformer, Step-up
and Step-down transformer, E.M.F. equation, Equivalent circuits, phasor diagram, Open
circuit and short circuit tests, losses and efficiency, All day efficiency, Auto transformer.
(8)
D.C. Machines Construction, Methods of excitation and classifications, Simple lap and
wave windings, emf equation, characteristics of different dc generator, armature reaction,
Commutation, Back e.m.f in a d.c. motor, Motor Starter, Speed and torque equations,
Speed vs torque characteristics and speed control of DC motors, losses in dc machines,
Applications. (12)
Induction Motor: Pulsating and rotating magnetic field construction and principle of
operation of Single and three phase induction motors, cage and wound rotor induction
Syllabus for B Tech in Mechanical Engineering
62
 motors, comparison between them slip, equivalent circuits, No load and blocked rotor tests,
Circle diagram, Torque/speed curve Starting and speed control, Applications of single
phase and three phase induction motors. (12)
Synchronous Machines: Construction-alternators-turbo & hydro generators, principle of
operation, emf equation, excitation control, synchronization load sharing synchronous
motor operation, Synchronous condenser, applications of synchronous generator and
motor. (6)
Text Books, Text Books:
and/or 1. Electrical Machinery by P S Bimbhra
reference 2. Electrical Technology Vol-II by B L Thereza
material Reference Books:
1. Electrical Machines by J B Gupta

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Solid PCR 0 0 3 3 1.5
451 Mechanics
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Engineering Mechanics, CT+EA
Solid Mechanics
Course CO1: Graphical and experimental verification of the solid Mechanics and Engineering
Outcomes mechanics
Topics Mohr’s Circle on strain Rosette- Graphical Solution.
Covered Mohr’s Circle on Moment of Inertia - Graphical Solution.
Mechanical testing of Engineering Materials.
Experiments on the principles of strength of materials.
Instrumentation for measurement of deflection under loading.

Text Text Books:

Books, 1. Strength of Materials – A. Pytel and F. L. Singer
and/or
reference Reference Books:
material 1. Elements of Strength of Materials – S. P. Timoshenko and D. H. Young
2. Strength of Materials – S. S. Rattan

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Fluid PCR 0 0 3 3 1.5
452
Syllabus for B Tech in Mechanical Engineering
63
 Mechanics
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC303 (Fluid Mechanics) CT+EA
Course CO1: Fundamentals of fluid mechanics.
Outcomes
Topics Calibration of Venturimeter.
Covered Calibration of Orificemeter
Determination of friction factor in flow through pipes.
Determination of coefficient of bend loss in flow through pipes.
Experiment on Impact of jet.
Calibration of V-notch.
Experiment on Bernoullie’s Theorem.
Text Text Books:
Books, 1. Mechanics of Fluids: Massey, B. S.
and/or 2. Fluid Mechanics – J. F. Douglas, J. M. Gasiorek, J. A. Swaffied, L. B. Jack
reference 3. Introduction to Fluid Mechanics and Fluid Machines- S.K. Som, et al.
material 4. Hydraulic Machinery - Jagdish Lal
Reference Books:
Fluid Mechanics—F. M. White

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Mechanism PCR 0 0 3 3 1.5
453 Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Engineering Mechanics CT+EA
Course CO1: Students will be able to solve kinematics of mechanism by graphical method
Outcomes CO2: Students will be able to analyze mechanism by computer aided tools
CO3: Students will be able to solve mechanism synthesis problems using computer
aided tools
CO4: Students will be able to demonstrate model of few planar mechanisms
Topics Determination of velocity and acceleration of various mechanisms by semi graphical
Covered methods.
Analysis of inertia forces.
Computer Aided Kinematic Analysis of planar mechanisms
Computer Aided Mechanism Synthesis of planar mechanisms
Modeling & simulation of mechanisms using Computer Aided Tools
Model making
Text Text Books:
Books, 1. Theory of machines and mechanisms – Uicker, Penrock and Shigley
and/or 2. Theory of mechanisms and machines ---Ghosh & Mallick
reference 3. Theory of machines – S S Rattan
material
Reference Books:

Syllabus for B Tech in Mechanical Engineering

64
 1. Theory of machines – Thomas Bevan
2. Introduction to the mechanics of machines – Morrison and Crossland

Department of Electrical Engineering

OFFERED FOR ME DEPARTMENT
Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Total it
Electives re (L) al (T) al (P) Hou
(PEL) rs
EES48 Electrical
2 Machines PCR 0 0 3 3 1.5
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
EES51(ELECTRICAL CT+EA
TECHNOLOGY LAB),
EEC432 (ELECTRICAL
MACHINES)
Course CO1: Ability to determine the equivalent circuit parameters of a single-
Outcomes phase transformer
CO2: Ability to determine the parameters of single-phase as well as
three phase induction motor.
CO3: Ability to determine the characteristics of dc shunt generator and
series generator
CO4: Ability to control the speed of a dc shunt motor
CO5: Ability evaluate the voltage regulation of an alternator
CO6: Ability to determine the efficiency of dc machines
Topics List of Experiments:
Covered
Determination of equivalent circuit parameters of a single-phase
transformer.
2. No-load and load characteristics of a dc shunt generator.
3. Speed control of a dc shunt motor.
4. Open-circuit and load characteristics of a dc series generator.
5. Voltage regulation of an alternator.
6. To perform no-load and blocked-rotor tests on a three-phase
Induction Motor.
7. To perform no-load and blocked-rotor tests on a single-phase
Induction Motor.
8. Swinburne’s test of a dc machine.
Text Text Books:
Books, 1. A. E. Fitzgerald, C. Kingsley and S. Umans, Electric Machinery,
and/or McGraw-Hill Co. Inc.
reference
2. D. P. Kothari and I. J. Nagrath, Electrical Machines, Tata McGraw-
material
Hill.
Reference Books:
1. Laboratory manuals

Syllabus for B Tech in Mechanical Engineering

65
 Department of Mechanical Engineering
Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Machining PCR 3 1 0 4 4
501 and Machine
Tools
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1 Knowledge of fundamental machining processes and the underlying sciences of
Outcomes machining and the related processes
CO2 Various machine tools, their operations and the mechanisms in machine tools

Topics Machining (28 hrs)

Covered Introduction to Manufacturing processes and Metal cutting, Types of basic motions, Speed,
feed and depth of cut, Shapes produced by different combination of motions, representation
of chip formation in 3D. 2
Cutting Tools: Single point, Multi point, Left hand and Right hand cutting tool. Single
point cutting tool nomenclature and representation in 3D, Tool geometry in ASA and ORS
systems, Effect of tool geometry on performance. 2
Experimental observations in metal cutting- chip thickness, width of cut, primary
deformation zone, shear angle concept, Piispanen’s model, types of chips and the
conditions of their formation, strain hardening, heat generation and dissipation, cutting
fluid. Orthogonal and Oblique cutting- 2D and 3D representation, effect on chip formation
and on mechanics of chip formation. Concept of undeformed chip thickness, chip
reduction coefficient determination- experimentally from chip length. Analytical
determination of shear angle and shear strain from simple geometry of chip formation.
4
Forces in Metal cutting: Free body diagram and mechanics of chip formation, direction
and Representation of forces on basic plane and orthogonal plane, 3D representation of
forces on cutting tool, Merchant’s Circle Diagram representation of forces, transformation
of forces, kinematic coefficient of friction, total work done and its distribution, different
specific energies, power estimation, Merchant’s first shear angle relationship and its
deviation from experimental observations. 4
Tool life: Different way of tool failure, types of tool wear- their causes and remedies,
features of flank and face wear, characteristic of wear growth, definition of tool life, factors
affecting tool life, Taylor’s tool life equation, effects of tool geometry on tool life. 4.
Grinding- Machines and processes, Transverse grinding and plunge grinding, creep-feed
grinding, centreless grinding, truing and dressing of grinding wheels, balancing of grinding
wheels, Details of grinding wheels- Manufacturing and specifications, grinding wheel
wear, grinding temperature. 6
Nonconventional machining processes: Working principles, processes and mechanics of
process parameters and applications. ECM, EDM, AJM, USM 6

Machine tools (28 hours)

Fundamental of Machine tools, Machine tool elements. 1
General feature of construction and working of Lathe, Different parts of a Lathe, Types of
Lathe and specification. Back gear arrangement, Work holding devices. Screw cutting,
Taper turning, Form turning and various other operations performed by a Lathe. Feed,
speed, depth of cut and machining time calculation. 6
Syllabus for B Tech in Mechanical Engineering
66
 General feature of construction and working of Drilling machine, Different parts of a
Drilling machine, Types of Drilling machine and Specification. Reaming, Threading and
various other operations performed by a Drilling machine. Types of Drill bits. Feed, speed
and machining time calculation. 4
General feature of construction and working of Milling machine, Different parts of a
Milling machine, Types of Milling machine and Specification. Dividing head and Indexing
method. Up milling, Down milling, Spiral milling and other operations performed by a
Milling machine. Types and choice of Milling cutter. Machining time calculation. 6
General feature of construction and working of Shaping machine and Slotting machine.
Quick return mechanism. Whitworth mechanism, Feed mechanism. Types of tools.
Machining time calculation. 4
Gear manufacture- milling, hobbing and shaping, Gear finishing processes 4
Turret and Capstan Lathe: Types, parts, equipments and tools for use on turret and capstan
lathe, operational planning and turret tool layout. 4

Text Text Books:

Books, 1. Theory of metal cutting – G. Kuppuswamy
and/or 2. Production Engineering Sciences – Pandey and Singh
reference 3. Manufacturing Processes – H. S. Shan, Vol. 2
material 4. A textbook of Production Engineering – P. C. Sharma

Reference Books:
1. Manufacturing Science – A. Ghosh, A.K.Mallik
2. Theory of metal cutting – Sen and Bhattacharya

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC IC Engine PCR 3 0 0 3 3
502 and Gas
Turbines
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304, MEC 403 CT+EA
Course CO1 Concept of internal combustion engines
Outcomes CO2 Mechanism of internal combustion engines
CO3 Pollution from internal combustion engines
CO4 Mechanism of gas turbines
CO5 Outlines of alternative fuels

Topics Internal Combustion Engines: Basic engine types and their operation,
Covered construction and application. Engine design and operating parameters,
thermo-chemistry of fuel air mixture, air-fuel cycle, properties of
working fluids. Indicator diagrams, engine performance and output,
compression ratio, air-fuel ratio, Ignition timing and other affecting
variables on engine performance. Fuel and fuel rating. Charge motion
within the cylinder, combustions in SI and CI engines. Detonation and
Knock, Combustion chamber, Carburation and fuel injection systems.
Scavenging, natural aspiration, turbo charging and super charging,

Syllabus for B Tech in Mechanical Engineering

67
 Engine friction, lubrication and cooling. Operating variables Affecting
SI and CI engine performance. Modern systems for controlling engine
operation. Testing of IC engines.
27
Pollution from I. C. Engines and its control: Exhaust of IC engines,
Composition of exhaust gases, Apparatus for exhaust gas analysis,
Permissible limits and Remedial measures for control emissions.
5
Alternative fuels for I. C. Engines.
4
Gas Turbines: Application of gas turbines, analysis of open and closed
cycles, Gas turbine combustion chamber. Single and multi-shell
arrangements. Inter-cooling. Reheat and regeneration. Matching of
turbine and compressor. Performance characteristics. Jet propulsion
and application. 6
Text Text Books:
Books, 1. Internal Combustion Engine – V Ganesan
and/or 2. A text book of Internal Combustion Engines—R. K. Rajput
reference
material Reference Books:
1. I. C. Engines-- P. W. Gill, Smith, Zury
2. I. C. Engine Fundamentals -- Obert
3. I. C. Engine Fundamentals –Heywood

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Machine PCR 3 1 0 4 4
503 Design
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 302 (Theory of CT+EA
Machines and
Mechanisms), MEC 401
(Design of Machine
Element)
Course CO1 Detail analysis of members under fatigue loads
Outcomes CO2 Design procedures for some machine elements used in
mechanical drives
CO3 Exposed to the importance of engineering tolerances and its
use
CO4 Introduction to different types of bearings and lubrications
CO5 To understand the basics of gear mechanics

Topics Manufacturing considerations in Design: Fits and Tolerances.

Covered 4
Belt drives: Flat belts and V-belts.
5
Power screw

Syllabus for B Tech in Mechanical Engineering

68
 5
Bearings: Sliding contact bearing; Rolling contact bearings -
Construction, Types and selection, Constructional details, Types of
lubrication. 7
Toothed Gear Drive: Spur gear- Contact forces, Materials, Static
design by Lewis equation.
7
Dynamic loads on gears – Buckingham’s method.Types, Terminology,
Geometrical proportions, Analysis of contact, Materials, Analysis of
Force, and Design of Helical, Bevel and Worm gears. Check for
dynamic load and wear strength. Design of gear boxes.
15
Brakes: Band brakes and Shoe brakes
5
Clutch: Friction clutches and Jaw clutches.
4
Text Text Books:
Books, 1. Mechanical Engineering Design – J.E. Shigley
and/or 2. Design of Machine Elements – M.F. Spotts
reference 3. Design of Machine Elements – V.B. Bhandari
material
Reference Books:
1. Machine Design – Black and Adams

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Dynamics of PCR 2 1 0 3 3
504 Machinery
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 302 (Theory of CT+EA
Machines and
Mechanisms)
Course CO1 Knowledge of gyroscopic motion of dynamic mechanical system
Outcomes CO2 Knowledge of balancing of rotating and reciprocating machines
CO3 Knowledge of longitudinal, torsional and transverse vibration
of mechanical system

Topics Gyroscope
Covered Spinning, precession and gyroscopic couple; gyroscopic effect on
ships and aeroplane; Application of Gyroscope
14
Balancing
Internal and external balancing; Balancing of rotating masses -single
plane balancing and two plane balancing, Balancing of
reciprocating masses – single cylinder engine, Vee cylinder engine,
and multicylinder inline engine. 14
Vibration

Syllabus for B Tech in Mechanical Engineering

69
 Longitudinal vibration – free vibration, damped vibration, and
forced damped vibration; Torsional vibration – free vibration of rotor
system and torsionally equivalent shaft; Transverse vibration –
vibration of shaft carrying uniformly distributed load and several
concentrated load, and critical speed of shaft. 14

Text Text Books:

Books, 1. Theory of Machines and Mechanisms, Uicker J.J., Pennock G
and/or 2. Theory of Mechanisms and Machines, Ghosh A., Mallik A.K.
reference
material Reference Books:
1. Dynamics of machinery : Holowenko, Alfred R

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEO Experimenta PEL 3 0 0 3 3
541 l Methods in
Engineering
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Nil CT+EA
Course
CO1: Acquire an idea about basic concepts of engineering
Outcomes
measurements
CO2: To learn the basics of data analysis
CO3: To learn the fundamentals of data acquisition.
CO4: To learn the measurement techniques for electrical signals,
pressure, temperature, flow, force, motion, vibration etc.
Topics Basic concepts: Calibration, Standards, Dynamic Measurement,
Covered System response and Fourier Analysis
4
Data analysis: Error analysis, Uncertainty analysis, Statistical analysis,
Curve fitting, Goodness of fit.
6
Measurement of electrical signals: Waveform measurements,
Analog/digital meters, Amplifiers, Signal Conditioner, Oscilloscope,
transducers 5
Measurements of physical variables: Pressure measurement
4 Flow measurement
6 Temperature measurement
4
Force/ torque/ strain measurement, motion and vibration
measurement. 9
Data acquisition and processing: Signal conditioning, Data
transmission, ADC and DAC
4

Syllabus for B Tech in Mechanical Engineering

70
Text Books, Text Books:
and/or 1. Experimental Methods for Engineers – J. P. Holman
reference
material Reference Books:
1. Instrumentation, measurements and experiments in Fluids by E.
Rathakrishnan
2. Handbook of experimental fluid mechanics by Foss et al.
3. Measurement systems—application and design, Doebelin, E. O.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hours
(PEL)
MES Design and PCR 0 0 3 3 1.5
551 Dynamics
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) )
XEC01, MEC 302, MEC CT
401
Course CO1: Acquire basic idea about the machine component drawing, geometric profiles of
Outcomes gears and cams
CO2: To understand the use of gyroscope and governors
CO3: Understanding vibratory systems and mass balancing concept.
Topics  Drawings of the followings.
Covered  Assignment 1: Dimensioning concept and detail drawing of machine
components. (3hrs x3)
 Assignment 2: Generation of geometric profiles of gears and cams. (3hrs x 2)
 Motorized gyroscope – Study of gyroscopic effect and couple (3Hrs)
 Governor - Determination of range sensitivity, effort etc., for Watts / Porter /
Proell / Hartnell Governors. (3Hrs)
 Single degree of freedom Spring Mass System – Determination of natural
Frequency and verification of Laws of springs – Damping coefficient determination
(3Hrs)
 Experiment on rotor balancing (3 Hrs x2)

Text Text Books:

Books, 1. Theory of Mechanisms and Machines, Ghosh, Mallik
and/or 2. Theory of Machines and Mechanisms, Uicker J.J., Pennock G.R.,
reference Shigley J.E.
material
Reference Books
1. Introduction to the mechanics of machines, Morrison J.L.M.,
Crossland B.
2. Dynamics of machinery : Holowenko, Alfred R

Department of Mechanical Engineering

Syllabus for B Tech in Mechanical Engineering

71
Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Heat PCR 0 0 3 3 1.5
552 Transfer
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304, MEC 403 CT+EA
Course CO1: Fundamental concepts of Temperature measurement systems
Outcomes CO2: Test on heat transferring apparatus
CO3: Knowledge on conduction heat transfer
CO4: Knowledge on convection heat transfer
CO3: Knowledge on Radiation heat transfer

Topics Various types of temperature measuring and controlling instruments.

Covered Thermocouples, Thermostats etc.
Fundamental concept and function of Multi-channel temperature indicator,
Experiments on-
Determination of forced convection heat transfer coefficient through pin fin for variable
flow rates of fluid at different inlet temperature.
Determination of LMTD and effectiveness for parallel and counterflow heat exchanger.
Verification of the laws of radiation with the help of radiation laboratory unit. `
Text Text Books:
Books, 1. Heat Transfer-- J. P. Holman
and/or 2. A Course in Heat and Mass Transfer-- S.Domkundwar
reference 3. A Course in Internal Combustion Engines-- R. P. Sharma, M. L. Mathur
material 4. I. C. Engines-- P. W. Gill, Smith, Zury

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES CAD/CAM PCR 0 0 3 3 1.5
553 Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 401 CT+EA
Course CO1: Able to learn geometric modelling using CAD tools
Outcomes CO2: Able to use MATLAB for solving computer graphics problem and engineering
analysis problem
CO3: Exposed to CNC part programming

Topics Solid Modeling using software packages

Covered Graphics programming using MATLAB
CNC part programming for Tool path generation & verification using CAM software
Text Text Books:
Books, 1. Mastering CAD/CAM by I.Zeid

Syllabus for B Tech in Mechanical Engineering

72
and/or 2. Getting started with MATLAB by Rudra Pratap
reference Reference Books:
material 1. Computer Graphics by Roy A Plastock

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
WSS Workshop PCR 0 0 3 3 1.5
581 Practice II
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
CT+EA
Course CO1: Hands-on practice on Foundry
Outcomes CO2: Hands-on practice on different job manufacturing in machine shop
CO3: Hands-on practice on Pattern Shop
CO4: Hands-on practice on welding Shop

Topics Machine shop -- 3X6=18hrs.

Covered  Mechanism and function of different parts of machine tool.
 Machining operations:
1) Machining of shaft and knurling by lathe.
2) Thread cutting by lathe.
3) Taper turning by lathe.
4) Machining of gear blank by lathe.
5) Making of Square Bar by shaper.
6) Machining of surface by shaper.
7) Spur gear cutting by milling.
 Introduction of two and three axis CNC m/cs.
 Explanation of ‘G’ and ‘M’ Codes.
 Introduction to non-conventional machining.
Welding shop -- 3X2= 6hrs.

 Welded joints- square butt joint & T-fillet joint by SMAW with
mild steel flat.
 Types of electrodes and coding systems of electrodes.
 Types and functions of flux.
 Positions of welding, polarity in welding.

Pattern shop -- 3X2= 6hrs.

 Description of wooden pattern.
 Types of pattern, pattern allowance.
 Layout and design of pattern making.

Foundry -- 3X2= 6hrs.

 Preparation of sand mould using Solid/Split Pattern.
 Aluminium casting using the prepared mould.
 Determination of properties of Green Moulding Sand using Sand
Testing Equipments.

Viva voce -- 1X3= 3hrs.

Syllabus for B Tech in Mechanical Engineering

73
Text Text Books: Reference Books:
Books, 1. Manufacturing Science-- A. Ghosh, A. K. Mallik
and/or 2. Principles of Foundry Technology-- P. L. Jain
reference
material

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
HSC Principles of PCR 2 1 0 3 3
631 Economics
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304 Engineering CT+EA
Thermodynamics, MEC
403 Heat and Mass
Transfer
Course CO1: To review basic economic principles with students;
Outcomes CO2: To introduce students basic capital appraisal methods used for
carrying out economic analysis of different alternatives of
engineering projects or works;
CO3: To educate the students on how to evaluate systematically the
various cost elements of a typical manufactured product, an
engineering project or service, with a view to determining the
price offer.
Topics Group A: Microeconomics
Covered Economics: Basic Concepts 3
Theory of Consumer Behaviour 3
Theory of Production, Cost and Firms 3
Analyses of Market Structures: Perfect
Competition 3
Monopoly Market 3
General Equilibrium 3
Welfare Economics 3
Group B: Macroeconomics
Introduction to Macroeconomic Theory 3
National Income Accounting 3
Determination of Equilibrium Level of
Income 3
Money, Interest and Income 3
Inflation 3
Unemployment 3
Multiplier 3

Text Group A: Microeconomics

Books, 1. Koutsoyiannis: Modern Microeconomics
and/or 2. Maddala and Miller: Microeconomics
reference
3. AnindyaSen: Microeconomics: Theory and Applications
material

Syllabus for B Tech in Mechanical Engineering

74
 4. Pindyck&Rubenfeld: Microeconomics

Group B: Microeconomics
1. W. H. Branson: Macroeconomics – Theory and Policy (2nd ed)
2. N. G. Mankiw: Macroeconomics, Worth Publishers
3. Dornbush and Fisher: Macroeconomic Theory
4. SoumyenSikder: Principles of Macroeconomics

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Power Plant PCR 2 1 0 3 3
601 Engineering
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304 Engineering CT+EA
Thermodynamics, MEC
403 Heat and Mass
Transfer
Course CO1 Study of power production
Outcomes CO2 Study of some power plant related equipment’s

Topics Primary and Secondary sources of energy, Global trend for per capita
Covered consumption of energy, Demand of energy and future availability in
usable form. Recent developments in renovation of energy sources.
2
Analysis of steam cycles: Steam power plant outline, effect of
steam condition on thermal efficiency, regenerative feed heating, feed
water heaters, optimum degree of regeneration, deaerator, co-
generation of power and process heat 9
Fuels and combustion: Coal- ranking and analysis, fuel oil, natural and
petroleum gas,
Combustion reactions
2
Combustion equipment’s and firing methods: Fuel bed combustion,
pulverized coal firing, Cyclone furnace, fluidized bed combustion-CFB
and BFB, Coal gasifiers 7
Steam generator: High pressure boilers, Subcritical and
Supercritical boilers, Calculation on economizer, Superheater,
Reheater and Air preheater, Draught systems
- FD, ID and balanced draught, calculation of fan power. Circulation-
natural and Forced, circulation ratio, Performance rating of boilers.
8
Flow through nozzles and diffusers, Shocks, Super-saturation of steam
through nozzle
Flow.
3

Syllabus for B Tech in Mechanical Engineering

75
 Steam turbines: Machines working on impulse and reaction
principles, Turbine blading, Velocity triangles, Blade speed ratio,
Velocity and pressure compounding, Stage and overall efficiencies,
Degree of reaction. 8
Text Text Books:
Books, 1. Power Plant Engineering-P.K.Nag
and/or 2. Power Plant Technology - M.M. El.Wakil
reference 3. A Course in Power Plant Engineering- S. Domkundwar, S.C. Arora
material
Reference Books:
1. Power Plant Engineering- F.T. Morse
2. Steam Turbine Design and Practice- Kareton
3. Power Plant Engineering- Black and Veatch

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Industrial PCR 3 0 0 3 3
602 Engineering
and
Measurement
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Basic knowledge of CT+EA
Engineering Mechanics
Course CO1: Knowledge on the structures of Engineering Organization in
Outcomes general.
CO2: Planning of manning and production line.
CO3: Ability for material management.
CO4: Indian standards of measurement.
CO5: Techniques of engineering measurements with its application.

Topics Organization Structure: Classical principles, Different types of

Covered organization structure- Line, Staff, Line and staff, Committee
organization, Case study. 3
Plant Location: Factors affecting plant location, Plant location theories-
material index theory, location factor theory, Dimensional decision
making model, Force analogy method, Specific site
selection.
4
Plant layout: Different types of layout, Various flow patterns, Factory
building construction, Travel
chart.
2
Job evaluation, Merit rating and Wage incentive schemes: Methods
of job evaluation- Ranking method, Classification method, Point
method, Factor comparison method. Merit rating- Point rating scale,
Employee comparison system. Different wage incentive
schemes.

Syllabus for B Tech in Mechanical Engineering

76
 4
Work study: Operation process chart, Flow process chart, Flow
diagram, String diagram, Multiple activity chart- Man-machine chart,
Man-machine-helper chart, Left hand-right hand chart, Motion study,
SIMO study, Cycle graph and chronocycle graph, Performance rating,
Stop watch time study. 4
Production, planning and control: Routing and scheduling, Assignment
problems- 2 machines and n jobs, 3 machines and n jobs, m machines
and n jobs, n machines and n jobs, Gantt chart.
4

Generalised measurement systems- Calibration, Sensitivity, Damping,

Characteristics of first order and second order systems, Dynamic
response, Harmonic analysis. 5
Standards of linear measurements, Interferometric measurements.
2
Limit, Fit and Tolerances: Basis of a limit system, Unilateral and
Bilateral systems. 2
Indian limit system IS 919:1993; Types of fits and selection of fits, IS
2709:1982 3
Dimension chain and Dimensional analysis, Design and use of limit
gauges. 2
Error of flatness and straightness: Concept of mean true plane,
Measurement of flatness error using Beam Comparator, Autocollimator
and Precision Block Level. 3
Dynamometers for measuring 2-component and 3-component
machining forces. 2
Surface roughness measurement.
3
Text Text Books:
Books, 1. Industrial Engineering and Management-- Dr. Ravishankar
and/or 2. Industrial Engineering and Production Management-- M.
reference Mahajan
material 3. A Text book of Engineering Metrology-- I.C.Gupta
4. Engineering Dimentional Metrology-- L.Miller

Reference Books:
1. Management in Industry-- C.S.George
2. Engineering Tolerences-- H.W.Conway

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credit
Code course Core Lectu Tutori Practic Total
(PCR) / re (L) al (T) al (P)# Hou
Electives rs
(PEL)
MEE Automobile PEL 3 0 0 3 3
610 Engineering
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304, MEC403, MEC 502 CT+EA

Syllabus for B Tech in Mechanical Engineering

77
Course
CO1: Classification and layouts of different vehicles
Outcomes
CO2: Different types of Engines in use
CO3: Different types of clutch, gear box and transmission used
CO4: Different types of brakes, drivelines and wheels and tyres.
Topics Automotive engine: Construction, operation and service of automotive
Covered engine. 8
Bearing, lubrication and cooling system.
Fuel and exhaust, emission control.
6
Starting and charging system. Contact point and electronic ignition
system. Other accessories with electrical and electronic devices. Engine
trouble diagnosis and tune up.
10
Automotive power train: Transmission and transaxles, gear train,
differentials and drive axles, drive lines and universal joints, clutches
and brakes. 8
Automotive chassis: Springs and suspension system, steering system,
wheels and tyres.
6
Automotive ventilation and air conditioning techniques.
4
Text Suggested Text Books:
Books, 1. Automobile Engineering-- K. Singh
and/or 2. Automotive mechanics-- W. H. Crouse, D. L. Anglin
reference Suggested Reference Books:
material 1. Automotive mechanics-- J. Heitner

Department of Mechanical Engineering

Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P)# Hours
MEE 611 PEL 3 0 0 3 3
Gas Dynamics
and Propulsion
MEC303 (Fluid Mechanics) and Course Assessment methods (Continuous evaluation (CE) and end
MEC304 (Thermodynamics) assessment (EA))
NIL CE+EA

Course
CO1: To learn compressible flows with constant entropy only, with friction only and with
Outcomes
heat transfer only.
CO2: To learn Normal shock, oblique Shock and Prandtl-Meyer Flow with real life
applications.
CO3: To learn Performance analysis of Air Breathing Engines (Ramjet, Turbojet
(standard): Fan exhausted turbojet & Fan mixed turbojet and Turbo prop.)
CO4: To learn Performance analysis of Non Air Breathing Engines (Solid Rocket Motors
and Liquid Rocket Engines).

Topics Part-I: Gas Dynamics:

Covered
Review of basic compressible flow e.g. sonic velocity, wave propagation. Flow with
Syllabus for B Tech in Mechanical Engineering
78
 Variable area duct without normal shock and with normal shock. Fanno flow and
Rayleigh flow. Solution of problems using gas table. 7
Moving Normal shocks and Oblique shocks: Normal velocity superposition for moving
Normal shock and tangential velocity superposition for oblique shock, oblique shock
analysis for perfect gas, oblique shock table and charts. Problems. 7
Prandtl-Meyer flow: Isentropic turn ( either around expansion or compression corner)
from infinitesimal shocks, Mach waves, Prandtl-Meyer flow analysis, Prandtl-Meyer
function, over-expanded and under-expanded nozzles, boundary conditions for flow
direction and pressure, shock diamond, supersonic aerofoils, Working of supersonic
wind tunnel. 4
Correlation of Fanno flow, Rayleigh flow, and a normal shock 2
Part-II: JET PROPULSION
Air Breathing Engines: Derivation of generalized equation/ expressions for thrust,
propulsion efficiency, thermal efficiency and overall efficiency. Relation between them,
TSFC( Thrust specific fuel consumption); stoichiometry , equivalence ratio, mass
fraction, mole fraction, partial pressure, mass balance in chemical equations, heat of
reaction, heat balance in constant volume and constant pressure processes, fuel air ratio,
variation of temperature with F/O and its stoichiometric value. Condition for maximum
efficiency.
Performance analysis of the following:
(a) Ramjet, (b) Turbojet (standard): Fan exhausted turbojet & Fan mixed turbojet
(c) Turbo prop. Effect of after burner on all the above. Related problems 12

Non-air breathing engines: Performance of Rocket vehicles such as Thrust, specific

Impulse (Isp), vehicle acceleration, burning time. Type of chemical Rockets: Solid
Rocket Motors and Liquid Rocket Engines. Elementary theory and performance
characteristics of both types of chemical rockets. Related problems. 10
Text Books:
Text Books,
1. Fundamentals of gas dynamics -R.D. Zucker & Oscar Biblarz.
and/or
reference 2. Mechanics and thermodynamics of propulsion: P. G. Hill & C.R. Peterson.
material Reference Books:
1. The Dynamics and Thermodynamics of Compressible Fluid Flow by A. H. Shapiro.
2. Aircraft Propulsion : V. Babu

Department of Mechanical Engineering

Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P) Hours
MEE 612 Mechanics PEL 3 0 0 3 3
of Forming
and Press
Working
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))

Syllabus for B Tech in Mechanical Engineering

79
MEC 402 CT+EA
Course CO1: Detailed and in depth analysis of the forming processes.
Outcomes CO2: Specialized techniques in forming practiced in industry.
Topics Module 1:
Covered Stress-strain relationship: true stress true strain, elasticity,
anelasticity, plasticity, work hardening, work done or strain energy.
Complex Stress System, concept of absolute maximum shearing stress
in a plane-stress system, three dimensional stress system and Mohr's
circle for the general state of stress (3-D).
Plastic Deformation and Yield Criteria: maximum normal stress
theory (Rankine's Theory), Tresca's maximum shear stress theory, Von
Mises' maximum distortion energy theory, relation between tensile
yield stress and shear yield stress, yielding under plane strain
Graphical representation of Tresca’s and Von Mises' theory.
Forging: processes and its classification- drop forging and press
forging, open die, impression die, closed die and precision forging
processes. Grain flow in a forged product. Forging die materials,
lubrication, forging defects, forgeability of metals, die-manufacturing
methods. Analysis of forging load: Low friction or sliding friction
condition (as in cold forming); high friction condition; and, combined
slipping and sticking friction condition.
Rolling: strip rolling- recrystallization and process details, conditions
for biting, role of friction in rolling. Rolling mills, ring rolling, gear and
thread rolling, various rolled sections, defects in rolled products.
Determination of roll pressure: pressure distribution in rolling,
determination of neutral point, front tension and back tension, force
and power calculation. Roll deflections and roll flattening, spreading,
methods of reduction of rolling force, roll materials, various rolled
sections.
Drawing: drawing terms and their definitions, circular drawing die,
drawing of wire and rod (homogeneous deformation), maximum
possible reduction in a single pass, analysis of strip drawing,
calculation of force and power, analysis of wire and rod drawing,
calculation of force and power.
Extrusion: processes- direct and indirect extrusion, impact and
hydrostatic extrusion, metal extrusion practice, metal flow during
extrusion.
Module 2:
Sheet metal forming: characteristics; parameters affecting sheet
metal forming process such as, yield point elongation, anisotropy, grain
size, residual stresses, spring back, wrinkling, coated sheet.
1
Shearing, punching and blanking: punch force; shearing operations
like, die cutting, fine blanking, slitting, steel rules, nibbling; Shearing
dies: Punch and die shapes, compound dies, progressive dies, transfer
dies, tool and die materials. 5
Bending of sheets and plates: minimum bend radius, factors
affecting bendability, spring back, compensation for spring back,
common bending operations. 3
Deep drawing: Characteristics of deep drawing, formability of sheet
metal, design considerations
Miscellaneous forming processes: stretch forming, bulging,
hydroforming, various spinning operations.

Syllabus for B Tech in Mechanical Engineering

80
 3
High energy rate forming: Explosive forming, electrohydraulic
forming, magnetic pulse forming, superplastic forming etc.
3

Text Books, Text Books:

and/or 1. Manufacturing Processes for Engg. Materials - Kalpakjian
reference 2. Production Technology (vol I & II)—R. K. Jain and S.C.
material Gupta
3. Manufacturing Processes: H. S. Shan, Vol. 1
4. A textbook of Production Engineering – P. C. Sharma
Reference Books:
1) Manufacturing Science-- A. Ghosh, A.K.Mallik

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Tota it
Electives re (L) al (T) al (P) l
(PEL) Hou
rs
MEE Advanced PEL 3 0 0 3 3
613 Solids
Mechanics
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC301 (Strength of CT+EA
Material)
Course CO1: Three dimensional stress and strain analysis.
Outcomes CO2: Development of solution procedures using energy method
CO3: Analysis of non-circular shafts and thick cylinders.
Topics
Mathematical preliminaries: Vector, Matrix, Index notation.
Covered
4
Analysis of stress: Three dimensional state of stresses, Equation of
equilibrium in cartesian and cylindrical coordinate system and
equality of cross shear, plane state of stress, Principal stresses,
Stress Invariants, Mohr's circles, Mohr's stress plane, Octahedral
stresses.
10
Analysis of strain: State of strain, Green-Lagrange and infinitesimal
strain in cartesian and cylindrical coordinate system, Principal
strain, Compatibility conditions, Airy's stress function.
10
Energy methods: Elastic strain-energy for axial force, shear force,
bending moment and torque, Theorem of virtual work and its
application to derive governing equation of beam, Castigliano's
theorems. 10
Torsion of non-circular bar: Torsion of circular and elliptical bars,
Torsion of rectangular bars.
8
Thick cylinders: Axisymmetric problems, Thick cylinder

Syllabus for B Tech in Mechanical Engineering

81
 subjected to internal and external pressure, Composite cylinder.
6
Text Suggested Text Books:
Books, 1. Theory of elasticity By Timoshenko and Goodier (Mc Graw Hill)
and/or 2. Advanced Mechanics of Solids by L. S. Srinath
reference Suggested Reference Books:
material 3. Elasticity theory, applications and numerics by M. H. Sadd
(Academic Press)
4. Advanced mechanics of solids By O. T. Bruhns (Springer)
5. A treaties on the mathematical theory of elasticity A. E. H. Love
(Dover Publications)

Department of Mechanical Engineering

Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P) Hours
MEE 614 Advanced PEL 3 0 0 3 3
Machining
and CNC
Machine
Tools
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))
MEC 402 CT+EA
Course CO1: To understand theory of machining, orthogonal cutting
Outcomes CO2: To understand oblique cutting mechanics as applied to drilling and milling
CO3: To study other important aspects in machining related to cutting tools
CO4: Able to understand the fundamentals of CNC machine tools, Part programming, and
Part programming languages
Topics
Module 1 : Advanced Machining (21 hours)
Covered
Introduction: Characteristics and development of tool materials, cutting tool inserts and its
geometry, cutting fluids 3
Mechanics of Metal Cutting, Shear angle relationships and Lee and Shaffer’s Theory,
Work hardening and Chip breakers. 3
Stress distribution on rake face of the tool 1
Thermal aspects of machining. 2
Mechanisms of tool wear, Surface Finish and Effects of cutting parameters and tool
geometry on tool life. 4
Economics of machining. 1
Drilling: Geometry of drilling tools and mechanics of drilling. 3
Milling: Geometry of milling tools and mechanics of plain milling 4

Module 2 : CNC Machine Tools 21

CNC machine tools, constructional features, 2
Drives and controls, stepper motors, servo motors, hydraulic systems, 4
Feed back devices, 1
Counting devices, 1
Interpolators- linear, circular interpolation and other emerging techniques, 2
CNC part programming, post processors, 5
CNC programming with interactive graphics, 4
Use of various software packages, 2

Syllabus for B Tech in Mechanical Engineering

82
Text Books, Text Books:
and/or 1. Theory of metal cutting – G. Kuppuswamy
reference 2. Production Engineering Sciences – Pandey and Singh
material 3. A textbook of Production Engineering – P. C. Sharma
4. Computer Aided Manufacturing : P Rao, N Tewari, T.K. Kundra

Reference Books:
1. Manufacturing Science – A. Ghosh, A.K.Mallik
2. Theory of metal cutting – Sen and Bhattacharya
3. Computer numerical control of machine tools: G. E. Thyer

Department of Mechanical Engineering

Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P) Hours
MEE 615 Operation PEL 3 0 0 3 3
Research
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))
NIL CT+EA
Course
CO1: Students will be able to discuss the history, concepts, formulations and applications
Outcomes
of operations research.

CO2: Students will be able to analyze and solve conflicting problems on constrained linear
optimization problems having single and multiple objectives.
CO3: Students will be able to apply integer, dynamic programming methods for solving
relevant problems.
Topics
Origin, growth, definition, methodology and application of OR. 2
Covered
Linear Programming, Mathematical Modelling, Graphical Method of Solution, Sensitivity
Analysis. 8
Simplex Method, Big M and 2-Phase Methods, Duality in LP. 7
Transportation problem. 3
Assignment Problem 3
Sequencing problem. 2
Queuing model and Simulation. 3
Competitive Decision Making, Game Theory. 4
Duality Theory and Sensitivity Analysis. 3
Integer Programming, Binary Integer Programming. 4
Dynamic Programming. 3
Text Books, Text Books:
and/or 1. Hillier, Fredrick S. and Lieberman, Gerald J., Introduction to Operations Research,
reference 7th Edition, TMH, 2001.
material 2. Basu, S. K., Pal, D. K., Bagchi, H., Operation Research for Engineers, 2 nd Edition,
Oxford & IBH Publishing Co. Pvt. Ltd., 1998
3. Taha, H. A., Operation Research, McMillan Publishing Co., London, 1982.

Syllabus for B Tech in Mechanical Engineering

83
 Reference Books:
1. Churchman, C. M., Ackoff, R. L., Arnoff, E.L., Introduction to Operation
Research, Asia Publishing o., 1962
2. Hanssmann, F., Operations Research in Production and Inventory Control, John
Wiley & Sons, Inc., London, 1962.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Tota it
Electives re (L) al (T) al (P) l
(PEL) Hou
rs
MEE Mechanical PEL 3 0 0 3 3
616 Equipment
Design
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 401 - Design of CT+EA
Machine Elements &
MEC 503 - Machine
Design
Course CO1: Exposure to various types of mechanical elements and their
Outcomes design procedure.
CO2: Ability to design different mechanical systems independently.
CO3: Understand the working of various types of drive systems.
CO4: Dealing with the case studies help develop self-confidence.

Topics Chain Drive

Covered 4

Rope Drive
4
Spiral Bevel Gear Drive
4
CVT Mechanism
4
Design of Pulley and Idlers
5
Design of Worm Gears
4
Cam Mechanisms
4
Disc Brakes
4
Selection of Single-Phase Induction Motors
3
Case Studies
Syllabus for B Tech in Mechanical Engineering
84
 6

Text Text Books:

Books, 1. Black and Adams, Machine Design, McGraw Hill Book Company
and/or Private Ltd., USA, 1973.
reference 2. 2. Phelan R.M., Fundamentals of Mechanical Design, TMH, 2015.
material Reference Books:
1. Burr, Arthur H., and Cheatham, John B., Mechanical Analysis and
Design, Prentice Hall, USA,1995
2. Norton, R.L. , Machine Design: An Integrated Approach

Department of Mechanical Engineering

Course Title of the course Program Core Total Number of contact hours Credit
Code (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P) Hours
MEE 620 Advanced Foundry PEL 3 0 0 3 3
Engineering
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))
MEC402 (Casting, Forming and CT+EA
Welding)
Course  CO1 At the end of the course student will be able to get the knowledge about various
Outcomes aspects of casting processes and the underlying science
 CO2 : various types of casting methods
 CO3 : Application fields of various casting processes
Topics Casting Processes: Classification, characteristics of sand casting processes, metal mould
Covered casting process, Pattern materials, types of patterns, Mould and core making materials and
their characteristics. (12)
Solidification of metals: Nucleation and grain growth, solidification of pure metals, short
and long freezing range alloys, Rate of solidification, macrostructure and microstructure.
Solidification Contraction, Grain refinement (6)
Sand Casting Design: Gating and risering design calculations, Fluidity and its
measurement. (6)
Investment casting, shell moulding, squeeze casting, vacuum casting, counter-gravity flow-
pressure casting, Directional and monocrystal solidification, squeeze casting, semisolid
metal casting, rheocasting. (8)
Family of cast iron – Ductile Iron, Malleable Cast Iron, (3)
Casting defects- inspection and testing , analysis of casting defects, nondestructive testing
of casting- dye penetrant testing, magnetic flaw detection, radiography, ultrasonic testing,
etc. (4)
Near net shape casting processes, Modern foundry practices and special casting method.
Continuous casting (3)
Text Books, Text Books:
and/or 1. John Campbell, “Casting Practice” Elsevier Science Publishing Co.,2004
reference 2. Scrope Kalpakjian, “Manufacturing processes for Engineering Materials”,Addision,
material Wesley, 1997.
3. P.C. Mukherjee, Fundamentals of metal casting technology - Oxford and IBH
4. Beely, Foundry Technology, Newnes-Butterworths, 1979
Reference Books:
1. Casting properties of metals and alloys -V. Korolkove.
Syllabus for B Tech in Mechanical Engineering
85
 2. ASM Hand Book “Casting”, ASM International 1998.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Mechanics PEL 3 0 0 3 3
621 of
Composite
and
Functionally
Graded
Materials
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Engineering Mechanics, CT+EA
Strength of Materials
Course
CO1:Concept of orthotropic materials
Outcomes
CO2:Analysis of composite structures
CO3:Concept of FGM
Topics
Composites, various reinforcement and matrix materials.
Covered
3
Concept of orthotropic, transversely isotropic material, stress-strain
relation for orthotropic and transversely isotropic material. Engineering
constants for these materials. Transformation of stress and strain.
8
Micromechanical behavior of lamina.
6
Macro mechanical behavior of lamina, Classical lamination theory,
Laminate stiffness of a few cases, Stress strain variation in a laminate.
8
Equation of equilibrium for laminated plates for bending, Solution
technique for bending of simply supported laminated plates under
uniformly distribute transverse load.
8
Failure criterion of composites.
4
Introduction to FGM.
5

Text Text Books:

Books, 1. Mechanics of composite materials By R. M. Jones (Taylor and
and/or Francis)
reference 2. Engineering mechanics of composite materials By I. M. Daniel , O.
material Ishai (Oxford University Press)
Reference Books:
1. Mechanics of laminated composites plates and shells By J. N. Reddy
(CRC Press)
Syllabus for B Tech in Mechanical Engineering
86
 2. The behavior of structures composed of composite materials By Jack
R. Vinson and Robert L. Sierakowski

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Engineering PEL 3 0 0 3 3
622 Optimizatio
n
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA

Course CO1: Students will be able to describe and formulate optimization

Outcomes problems
CO2: Students will be able to apply knowledge of different optimization
methods for solving engineering problems
CO3: Students will be able to differentiate between optimization
methods and suggest a suitable technique applicable for a specific
problem.

Topics Introduction: Engineering Application, Statement and Classification of

Covered the Optimization Problem, Classification, formulation procedures.
4
Classical Methods: Single Variable Optimization; Multivariable
Optimization without any Constraints with Equality and Inequality
Constraints, Kuhn–Tucker Conditions; Linear Optimization Methods,
One-Dimensional Minimization Method. Unimodal Function.
6
Elimination Methods: Exhaustive search, Fibonocci and Golden Method.
3
Interpolation Method – Quadratic and Cubic Interpolation Method.
2
Unconstrained Minimization Method -- Univariate, Conjugate
Directions, Steepest Descent (Cauchy) Method, Newton’s Method,
Marquardt Method, Quasi-Newton Method.
6
Constrained Minimization Method, Random Search Methods,
Sequential Quadratic Programming. Basic Approach of the Penalty
Function Method, Interior Penalty Function Method, Exterior Penalty
Function Method. 5
Non-traditional Optimization Techniques - Genetic Algorithms.
Simulated annealing. Particle swarm optimization. Ant Colony
Optimization. Tabu search. 11
Reduction of size of an optimization problem. Scaling of design
Syllabus for B Tech in Mechanical Engineering
87
 variables and constraints.
3
Introduction to optimization Toolbox in MATLAB.
2

Text Text Books:

Books, 1. S.S. Rao, Engineering Optimization, Theory and Practics, 3rd
and/or Enlarged Edition, New Age International Publishers, New Delhi,
reference 2010.
material
2. Ashok D. Belegundu and Tirupathi R Chandrupatla, Optimization
Concepts and Applications in Engineering, Pearson Education 1999,
First India Reprint, 2002.

Reference Books:
1. G. N. Vanderplaats, Numerical Optimization Techniques for
Engineering Design with Applications, McGraw-Hill, New York,
1984.
2. R. L. Fox, Optimization Methods for Engineering Design, Addison-
Wesley, Reading, Mass, 1971.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Multi Phase PEL 3 0 0 3 3
623 Flow and
Heat
Transfer
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC303, MEC403 CT+EA
Course
CO1: Leads students toward a clear understanding and firm grasp of
Outcomes
the basic principles of multi phase flow and heat transfer.
CO2: Understands the fluid-dynamic involved in convection and multi-
phase heat transfer.
CO3: Performs elementary analysis of most gas-liquid two-phase
systems and prepares to use more advanced models.
CO4: Equips the student with the analytical model to apply the
fundamentals to a wide variety of complex engineering problems,
formulate them and interpret the results.
CO5: Student can analyze Hydrodynamics of three phase flows and
compare two phase flow situations.

Topics Introduction, Flow Regimes,

Covered 5
Homogeneous Flow, Separated Flow
4
Condensation,

Syllabus for B Tech in Mechanical Engineering

88
 2
One dimensional steady separated flow model,
6
Flow in which inertia effects dominate, energy equations,
3
The separated flow model for stratified and annular flow,
2
General theory of drift flux model,
3
Application of drift flux model to bubbly and slug flow,
4
Hydrodynamics of solid-liquid and gas-solid flow,
4
An introduction to three phase flow,
3
Fluid-Population Balance Technique, Volume of Fluid Method, Lattice
Boltzmann Model.
6
Text Text Books:
Books, 1. Ghiaasiaan, S. M., Two-Phase flow, Boiling, and Condensation,
and/or Cambridge University Press.
reference 2. Brennen, C.E., Fundamentals of Multiphase Flow, Cambridge
material University Press
Collier, J. G. and Thome, J. R., Convective Boiling and
Condensation, 3rd ed., Oxford University Press
3. Wallis, G.B., One Dimensional Two Phase Flow, McGraw Hill
Higher Education.
4. Hewitt, G.F., Measurement of Two Phase Flow Parameters.
5. Govier, G.W., and Aziz, k., Flow of Complex Mixtures.
6. Hetsroni, G., Handbook of Multiphase systems.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Tribology PEL 3 0 0 3 3
624
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 301, MEC 502, CT+EA
MEC 504
Course
CO1: To learn the basic knowledge of surface topography and contact between
Outcomes
engineering surfaces.
CO2: To learn the basic theory and application of friction and wear for different materials
CO3: To learn about lubricants and lubrication for different bearings
CO4: Introduced to Bio-tribology of human joints
CO5: Introduced to Micro-tribology for MEMS applications
Topics Surface topography: Measurement of surface topography;
Syllabus for B Tech in Mechanical Engineering
89
Covered Quantifying surface roughness; The topography of engineering
surfaces. 3
Contact between surfaces: Hertzian contact – sphere on sphere
contact and cylinder on cylinder contact; Contact between rough
surfaces. 6
Friction and Wear of contact surfaces: Laws and Theories of friction
and wear; Friction and Wear of different materials; Application to
friction materials. 12
Lubricant and lubrication: Viscosity of lubricants; Composition and
properties of oils and greases; Reynolds equation; Type of lubrications -
Hydrostatic lubrication, Hydrodynamic lubrication; Elastohydrodynamic
lubrication; Boundary lubrication, and application to bearings.
12
Microtribology: Surface forces and adhesion; Atomic force microscopy
(AFM); Friction, wear and lubrication on atomic level; Applications to
MEMS 7
Biotribology: Natural human joints; Structure and properties of
articular cartilage; Mechanism of synovial lubrication: Mechanism of
articular cartilage damage; Artificial joint replacements
8

Text Text Books:

Books, 1. Engineering Tribology, Dr. Prasanta Sahoo
and/or 2. Introduction to Tribology of Bearings-- B.C.Majumder
reference 3. Principles of Tribology-- J.Halling
material 4. Basic Lubrication Theory, Alastair Cameron

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Computer PEL 3 0 0 3 3
625 Aided Design
and
Manufacturin
g
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Machine Design, CT+EA
Engineering
Mathematics, Machine
Tool
Course
CO1: Able to understand scope and application of CAD/CAM tools in
Outcomes
industry
CO2: Able to learn geometric modelling and computer graphics
concept in CAD tools
CO3: Able to understand the different design analysis and optimization
tools in CAD.
CO4: Able to understand the fundamentals of Additive manufacturing,
Syllabus for B Tech in Mechanical Engineering
90
 CNC machine tools, Part programming, FMS etc.
Topics Introduction: Current trends in Design & Manufacturing, Fundamental
Covered concept of CAD-CAM-CAE, Product Life-cycle, Overview of CAD-CAM
system. 3
Computer Graphics: Fundamentals of Geometric transformations,
Graphics standards, CAD-CAM Data Exchange
4
Geometric Modeling: Basics of Wire-frame entities, curve
representation methods Surface entities, Solid modeling & concepts of
B-rep and CSG representation scheme 5
5Engineering Analysis Tools: Fundamentals of Finite Element
Modeling (FEM), Introduction to design optimization tools.
8
Virtual Prototyping & Rapid Prototyping: Introduction to Virtual
Prototyping and its applications in Mechanical Engineering, Principles
& applications of Additive manufacturing technologies.
5
Industrial Robotics: Classification, definition of industrial robot, Robot
anatomy, Configuration of robots, Application of robot, Robotic end-
effector, Robot programming language.
3
CNC Machine tools & CNC Programming: Structure of CNC machine
tool & functional units, Designation of axes, Drives & actuation
systems, Feedback devices, Automatic tool changer, Part programming
fundamentals, Computer Aided Part Programming, APT language
structure, CAD interface.
7
Group Technology: Part family, part classification and coding, benefits
of group technology
3
Introduction to FMS & CIM: Introduction to FMS, Components of
FMS, Fundamentals of CAPP, Introduction to Computer Integrated
Manufacturing. 4
Text Text Books:
Books, 1. CAD/CAM: Theory & Practice by I.Zeid
and/or 2. CAD/CAM by P.N.Rao
reference 3. Principles of Computer-Aided Design and Manufacturing by Farid
material Amirouche
4. Computer Graphics by Roy A Plastock

Reference Books:
1. Mastering CAD/CAM by I.Zeid
2. Robotics by Fu, Gonzalez, Lee
3. Finite Element Method by J.N.Reddy

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Syllabus for B Tech in Mechanical Engineering
91
 Electives (L) (T) al (P) Hour
(PEL) s
MES Engineering PCR 0 0 3 3 1.5
651 Measurement
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 501 CT+EA
Course CO1: Workshop and precision engineering measurement methods.
Outcomes CO2: Exposure to measuring instruments and their use.

Topics Use of different basic measuring instruments.

Covered Measurement of external and internal radius.
Measurement of external and internal taper.
Measurement of bore diameter.
Measurement of chordal gear tooth thickness.
Measurement of angle of an angle plate.
Measurement of diameters of a screw thread.
Measurement of error of surface roughness using Talysurf.
Measurement of different thread elements using optical projector.
Measurement of composite error of gears using Roll Gear Tester.

Text Hands out for each experiment.

Books, User manual for the instruments.
and/or
reference
material

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Power PCR 0 0 3 3 1.5
652 Generation
Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304, MEC 403, CT+EA
MEC 502
Course CO1: Experimentation of refrigerating systems
Outcomes CO2: Experimentation on steam generators
CO3: Study of steam turbines
CO4: Test on diesel engine
CO5: Experimentation on steam nozzle

Topics Refrigeration and air-conditioning: Specification, performance test and

Covered loading of refrigerators. Concept of air conditioning. Types of air
conditioning systems and their application.
Steam generators: Fundamental concept, types, application and
performance data. Use of steam for power generation.
Fundamental concept and function of Turbines.

Syllabus for B Tech in Mechanical Engineering

92
 Study of-

Construction of fire tube and water tube boiler.

Starting and loading of fire tube boiler.
Construction of vapour compression refrigerator unit.
Experiments on-

Determination of dryness fraction of steam.

Efficiency test of a boiler.
Performance test of diesel engine using mechanical type dynamometer
under variable speed conditions.
Determination of critical pressure ratio of a steam nozzle.
Effect of humidity and outside air temperature on cooling load of air
conditioning machine.
Determination of output and back-work ratio of a gas turbine unit
under variable load condition.
Text Text Books:
Books, 1. Refrigeration and Air-conditioning-- W. F. Stoecker, J. W. Jones
and/or 2. Refrigeration and Air-conditioning-- C. P. Arora
reference 3. Power Plant Engineering-- P. K. Nag
material 4. Power Plant Engineering-- F. T. Morse
5. Steam Turbine Design and Practice-- Kaerton
Reference Books:
1. Jeffrey M Gordon, Kim Choon Ng, Cool Thermodynamics, Viva Books, 2008.
2. Refrigeration and Air-conditioning-- R. C. Jordon, G. B. Priester
3. Modern Air-conditioning, Heating and Ventilation-- W. H. Carrier, R. E. Cherne

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Machine PCR 0 0 3 3 1.5
653 Design
Sessional - I
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 401, MEC 503 CT+EA
Course CO1: Acquire basic idea about making the design and production drawing for simple
Outcomes and common mechanical assembly.
CO2: To understand the method of implementation of engineering tolerances.
CO3: To identify the importance of using the standards and use of catalogues in making
the design.
Topics Design and Drawing of Machine Elements: Cotter joint, Flexible Coupling, Screw Jack.
Covered (36)
Problems as assigned by the concerned teacher (6)
Text Text Books:
Books, 1. Design of Machine Elements – V.B. Bhandari
and/or 2. Design of Machine Elements – M.F. Spotts
reference 3. Design Data Book – P.S.G. College of Technology, Coimbatore.
material Reference Books:
Syllabus for B Tech in Mechanical Engineering
93
 1. Mechanical Engineering Design – J.E. Shigley
2. Fundamentals of Mechanical Design – R.M. Phelan

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Manufacturin PCR 0 0 3 3 1.5
654 g Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
WSS51, MEC 402 CT+EA
Course CO1: Hands on practice on different job manufacturing by milling machine
Outcomes CO2: Understanding power transmission mechanism in lathe, drilling machine,
Milling machine etc.
CO3: Exposure to grinding machine and job practice
CO4: Exposure to NC/CNC machines, part programming, and job practice
CO5: Job practice in nonconventional machining, ECM, EDM etc.
Topics Centre lathe - general features, parts and functions, Mechanism of power transmissions.
Covered Lathe operations - straight, taper and eccentric turning, thread cutting, drilling, boring,
profile turning, knurling.
Horizontal and Vertical milling machine – Spindle drives and feed motion -
Milling cutters – indexing head – Simple, compound and differential indexing,
Shaping machine – cutting motion and feed motion, slotting machine,
Grinding machine – Cutting variables - selection of speeds, feeds and depth of cut - use of
cutting fluids - Methods of holding work. Grinding machine – Surface grinding
Unconventional machining,
NC/CNC machine.
Exercises:
Shaping and slotting Exercises -Flat and bevel surfaces, grooves, Slots, guide ways, key
ways etc. Exercises in horizontal and -surface, slot, key way and gear milling-Vertical
milling machine. Grinding Exercises.
Non – traditional Machining,
NC/CNC Machining.
Text Text Books:
Books, 1. Manufacturing Processes for Engg. Materials - Kalpakjian
and/or 2. Production Technology (vol I & II)—R. K. Jain and S.C. Gupta
reference 3. A Course in Workshop Technology ( vol I & II)-- B.S.Raghuwanshi
material
Reference Books:
1. Manufacturing Science-- A. Ghosh, A.K.Mallik
2. Principles of Foundry Technology-- P.L.Jain

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEO Tribology PEL 3 0 0 3 3
Syllabus for B Tech in Mechanical Engineering
94
641
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NA CT+EA
Course
CO1: To learn the basic knowledge of surface topography and contact between
Outcomes
engineering surfaces.
CO2: To learn the basic theory and application of friction and wear for different materials
CO3: To learn about lubricants and lubrication for different bearings
CO4: Introduced to Bio-tribology of human joints
CO5: Introduced to Micro-tribology for MEMS applications

Topics Part I - Basic Tribology

Covered
Surface topography: Measurement of surface topography; Quantifying surface roughness;
The topography of engineering surfaces. 2
Contact between surfaces: Hertzian contact – sphere on sphere contact and cylinder on
cylinder contact; Contact between rough surfaces. 4
Friction and Wear of contact surfaces: Laws and Theories of friction and wear; Friction
and Wear of different materials; Application to friction materials. 8
Lubricants and lubrication: Viscosity of lubricants; Composition and properties of oils
and greases; Reynolds equation; Type of lubrications - Hydrostatic lubrication,
Hydrodynamic lubrication; Elastohydrodynamic lubrication; Boundary lubrication, and
application to bearings. 14
Part II - Advanced Tribology
Microtribology: Surface forces and adhesion; Atomic force microscopy (AFM); Friction,
wear and lubrication on atomic level; Applications to MEMS. 6
Biotribology: Natural human joints; Structure and properties of articular cartilage;
Mechanism of synovial lubrication: Mechanism of articular cartilage damage; Artificial
joint replacements; Skin Tribology 8)

Text Text Books:

Books, 1. Engineering Tribology - Dr. Prasanta Sahoo
and/or 2. Introduction to Tribology of Bearings-- B.C.Majumder
reference 3. Principles of Tribology-- J.Halling
material 4. Basic Lubrication Theory - Alastair Cameron

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credit
Code course Core (PCR) Lectu Tutori Practic Total
/ Electives re (L) al (T) al (P)# Hou
(PEL) rs
MEE Finite PEL 3 0 0 3 3
710 Element
Method
Pre-requisites Corse Assessment methods (Continuous (CT) and end
assessment (EA))
Syllabus for B Tech in Mechanical Engineering
95
MEC 301 (Solid CT+EA
Mechanics,) Basic
Engineering
Mathematics
Course
CO1: To obtain an understanding of the fundamental theory of the FEA
Outcomes
method
CO2: To develop the ability to generate the governing FE equations for
systems governed by partial differential equations
CO3: To understand the use of the basic finite elements for analysis of
bar, truss, beam etc.
Topics
Approximation Methods for solving Differential Equations, weak form
Covered
of differential equation
8
One-dimensional FE formulation
6
FE formulation of truss and frames
5
Two dimensional FE formulation, Plane stress/ plane strain problem,
Axisymmetric problem.
8
FE formulation for bending of beam
5
Free vibration of bar and beam
6
Concept of continuity and convergence criteria.
4
Text Text Books:
Books, 1. Text book of Finite Element Analysis by P. Sesu (PHI)
and/or 2. Introduction to Finite Elements in Engineering by T. R.
reference Chandrupatla, A. D. Belegundu ( Prentice- Hall)
material 3. An Introduction to the Finite Element Method by J. N. Reddy (Tata
McGraw Hill)
Reference Books:
1. Finite Element Procedures by K. J. Bathe ( Prentice Hall)
2. Finite Element analysis Theory and Programming by C. S.
Krishnamoorthy (Tata McGraw Hill)
3. Concepts and applications of finite element analysis by R. D. Cook,
D. S. Malkus etc. (Wiley)

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lectu Tutoria Practi Tota t
Electives re (L) l (T) cal l
(PEL) (P) Hou
rs
MEE7 Computationa PEL 3 0 0 3 3
11 l Fluid
Dynamics and
Heat Transfer
Pre-requisites Course Assessment methods (Continuous (CT) and end
Syllabus for B Tech in Mechanical Engineering
96
 assessment (EA))
MEC303 (Fluid CT+EA
Mechanics) &
MEC304(Thermodynamic
s)
Course
CO1: To learn to model a physical Fluid Mechanical and Heat Transfer
Outcomes
problem (both Laminar & Turbulent Flow) mathematically in
terms of PDEs.
CO3: To learn discretization of the PDEs using Finite Difference and
Finite Volume Methods
CO3: To learn R-K4 method to solve ODEs and Techniques to solve
PDEs.
CO4: To learn to solve simple Heat transfer Problems and Viscous
Incompressible Fluid Flow problems using MATLAB coding and
checking the same by simulation using ANSYS-Fluent software.
Topics Coservation equations of fluid flow and heat transfer:
Covered Mass, momentum (NS-equation), energy conservation equation and
equation of state, Stream function- Vorticity method and Laminar
Boundary layer equations for Viscous and Thermal Boundary layer.
Classification of PDEs: Elliptical, Parabolic and Hyperbolic PDEs, Initial
and Boundary value problems, some examples. Numerical methods: (1)
Jacobi Iteration, (2)Point Gauss Siedel iteration (3), Line Gauss Siedel
iteration (4) Point Successive over / under relaxation method and (5)
TDMA using Thomas Algorithm.
9
Turbulence modeling: (1) RANS equations with (a) Mixing length
model, (b) The k-ε model and (c) k-ω model. (2) Large eddy Simulation
(Concept only) and (3) Direct Numerical Simulation, DNS (Issues and
concepts). 5

Discretization techniques of PDEs:

Finite Difference Methods: Central, Forward and Backward
Differencing for both uniform and non-uniform grids. Numerical errors
and accuracy; Consistency, Convergence and Stability of finite difference
scheme. Grid generation, Discretization and solution using Matlab
coding of both Steady and Unsteady Diffusion problems and Convetion-
Diffusion problems.
Finite volume Method: Conservativeness, Boundedness and
Transportiveness, Central differencing schemes, Upwind differencing
schemes, Hybrid differencing schemes and Power law schemes,
Quadratic Upstream Interpolation for Convective Kinetics (QUICK).
14

Numerical methods for Viscous Incompressible Fluid Flow:

Runge-Kutta methods and its application to solve Viscous Boundary
layer equations (Blasius equation for flat plate) and Thermal boundary
layer equations. Stream function- Vorticity method, MAC algorithm,
SIPLE, SIMPLER, SIMPLEC and PISO to solve Viscous incompressible
fluid flow. 14

Text Text Books:

Syllabus for B Tech in Mechanical Engineering

97
Books, 1. Pradip Neogy, S. K. Chakraborty and M. K. Laha: Introduction to
and/or Computational Fluid Dynamics;
reference 2. H. K. Versteeg. and W. Malalasekera : An Introduction to
material Computational Fluid Dynamics: The Finite Volume Method.
3. P.S. Ghoshdastidar: Computational Fluid Dynamics and Heat
Transfer.

Reference Books:
1. Tannehill, J. C., Anderson, D. A. and Pletcher, R. H.,
Computational Fluid Mechanics and Heat Transfer, McGraw Hill,
2002.
Patankar, S. V., Numerical Heat Transfer and Fluid Flow, Ane
Books-New Delhi, 1980.
2. Blazek, J., Computational Fluid Dynamics: Principles and
Applications, 2nd Edition, Elsevier Science & Technology, 2006.
3. Chung, T. J., Computational Fluid Dynamics, Cambridge
University Press, 2003.

Department of Mechanical Engineering

Course Title of the course Program Core Total Number of contact hours Credit
Code (PCR) / Lecture Tutorial Practical Total
Electives (PEL) (L) (T) (P) Hours
MEE 712 Design and
PEL 3 0 0 3 3
Optimization
of Thermal
Systems
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))
MEC 304, MEC 403, MEC 502 CT+EA

Course CO1: Latest methodologies for the design of thermal system

Outcomes
CO2: Use of economics, system simulation and optimization method for thermal system
CO3: Will learn exergy analysis and its application for thermal system
CO4: Use of thermo-ecological parameters to assess various thermal system
CO5: Modeling of energy system
Topics 1. Introduction to Thermal System Design
Covered Introduction, Life cycle design
Thermal system design aspects
Computer aided thermal system design
2. Thermodynamics, Modelling, and Design Analysis
Basic concepts and definition
Control volume aspects
Property relations
Reacting mixtures and combustion
Modelling and design of piping systems
3. Thermodynamic Modelling of Polygeneration System
Modelling of Power Generation
Modelling of Cogeneration
Modelling of Polygeneration
4. Exergy Analysis
Why exergy and energy analysis
Balances for mass, energy and entropy
Syllabus for B Tech in Mechanical Engineering
98
 Physical exergy
Chemical exergy
Exergy for systems and flows
Exergy balance
Reference environment
Applications
5. Applications with Thermodynamics and Heat and Fluid Flow
Heat transfer
Heat exchangers
Trade-off between thermal and fluid flow irreversibility
Application to power generation and refrigeration
6. Economic Analysis
Estimation of capital investment
Principles of economic evaluation
Cost of utility
Profitability evaluation
7. Thermoeconomic Analysis and Evaluation
Fundamental of thermoeconomics
Thermoeconomic variable for component evaluation
Costing considerations
8. Problem Formulation and Method for Optimization
Introduction
Optimization method
Optimization of thermal systems
Practical aspects
9. Thermoeconomic Optimization
Introduction to optimization
Cost optimal exergetic efficiency
Optimization of heat exchanger networks
Enhanced system optimization
10. Exergy Method: Ecological Applications
Cumulative exergy consumption
Thermo-ecological cost
Applications

Text Books, Text Books:

and/or 1. Bejan A., Tsatsaronis G., Moran M.; Thermal design and optimization. Wiley.
reference 2. Jaluria Y., Design and optimization of thermal system. CRC Press.
material 3. Szargut J., Exergy method: Technical and ecological applications. WIT Press.
4. Dincer I., Rosen MA., Exergy: Energy, environment and sustainable development.
Elsevier.

Department of Mechanical Engineering

Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P) Hours
MEE 713 Non- PEL 3 0 0 3 3
conventiona
l Machining
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))

Syllabus for B Tech in Mechanical Engineering

99
MEC 402 CT+EA
Course CO1: Cutting edge technology for nonconventional/ precision machining.
Outcomes CO2: Emerging trend of metal removal process

Topics Introduction 1
Covered ECM: Working Principle; ECM Machine Tool; Process performances;
Advantages, limitations and applications; ECG- Working Principles;
ECG Machine Tool; Process performances; Advantages, limitations and
applications; Electrochemical Debarring (ECDe), Shaped Tube
Electrolytic Machining (STEM). 8
AJM, Water Jet Machining and Abrasive Water Jet Machining
8
USM: Working Principles, USM Machine Tool, Mechanics of cutting,
Process capabilities, Advantages, limitations and applications.
4
FIB: Working Principles, Machine Tool , Mechanism of material
removal and surface modification
4
EDM: Working Principles, EDM Machine Tool – Power Supply,
Dielectric System, Electrodes, Servo-system, Pulse generating Circuits
and analysis, Process Variables and Process Characteristics; Electrical
Discharge Grinding; 4
Wire-cut EDM: Working Principles, EDM Machine Tool, Process
Variables and Process Characteristics.
4
LBM: Production of LASERs, Working Principles of LBM, Types of
LASERs, Process characteristics, Advantages, Limitations and
Applications. 3
EBM: Production of Electron Beam, Working Principles of EBM,
Focusing and control of electron beam, Process characteristics,
Advantages, Limitations and Applications. 3
Chemical Machining, Micro fabrication and Micromachining 3

Text Books, Text Books:

and/or 1. Non-conventional Machining Process: V. K. Jain
reference 2. Modern Machining Processes: Pandey and Shan
material
Reference Books:
1. Manufacturing Science: Ghosh and mallik
2. Non-conventional Machining Process: P. K. Mishra

Department of Mechanical Engineering

Course Title of the course
Program Core Total Number of contact hours Credit
Code (PCR) / Lecture Tutorial Practical Total
Electives (L) (T) (P) Hours
(PEL)
MEE714 Advanced Welding PEL 3 0 0 3 3
Technology
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))
MEC402 (Casting, Forming and CT+EA

Syllabus for B Tech in Mechanical Engineering

100
Welding)
Course  CO1 : To get the knowledge about newly developed welding process and its parameters
Outcomes  CO2 : To learn various nonconventional welding methods
 CO3 : To learn various application fields of various welding processes
Topics Welding : Definition, requirements, Conditions for ideal weld, Classification of welding
Covered processes (1)
Arc Welding : Arc Initiation, Arc Physics, Arc Maintenance, Power Sources, Power
Factor, Duty Cycle, SMAW, GMAW, GTAW, SAW, ESW, EGW, PAW, AHW (10)
Electrodes : Electrode Classification, Electrode Nomenclature, Electrode composition,
Basicity Index, Role of different elements, Coating Factor, Selection of electrodes (3)
Weld design and associated symbols (5)
Shielding Gases: Types, roles, features, Selection (1)
Weld Metallurgy: Zones in a weld, HAZ and its calculation, Weld Decay, Weld
Distortion, Residual Stresses – their causes, identification and remedy (3)
Solid State welding Processes – Forge Welding, Cold Welding, Friction Welding, Friction
Stir Welding (6)
Thermo- Chemical Welding Processes – Thermite welding, etc (3)
Radiant Energy welding Processes – Electron Beam Welding, Laser Beam Welding,
Ultrasonic Welding (5)
Welding at Micro and Nano Scale (3)
Automation in Welding (2)
Text Books, Text Books:
and/or 1) Richard L. Little, Welding and Welding Technology, Tata McGraw Hill, 2004
reference 2) J.F.Lancaster, Metallurgy of welding, Allen & Unwin, London, 1980
material
Reference Books:
1) V. Tsegelsky, The Electric Welder, Mir Publishers, Moscow, 1968

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Tota it
Electives re (L) al (T) al (P) l
(PEL) Hou
rs
MEE Robotics PEL 3 0 0 3 3
715
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Knowledge on Mechanisms CT+EA
Course
CO1: Students will be able to discuss the history, concepts and key components of robotics
Outcomes
technologies. (a, g)
CO2: Students will be able to analyse and solve problems spatial transformation, forward
and inverse kinematics, dynamics of robot manipulators, jacobian and singularities,
joint trajectory for motion planning. (a, e, f, k, g)
CO3: Students will be able to describe and compare various robot grippers, sensors,
actuators and controllers and their perception. (a, e, k)
Topics Introduction to Robotics: Definition, Anatomy, Coordinate Systems, Work Envelopes,
Covered Basic structure, classification, applications of robots. 4
Robot Arm Kinematics: Frame transformation, Denavit-Hartenberg convention, Forward
and Inverse kinematics of serial manipulator. 10

Syllabus for B Tech in Mechanical Engineering

101
 Linear and Angular Velocity of Links and Statics of Serial manipulator: Jacobians,
Singularities. 6
Introduction to Dynamics of Serial Manipulators: Lagrange-Euler formulation. 5
Trajectory Planning of Manipulator: Joint space scheme, Cartesian space scheme. 5
Robot Sensors: Contact type, non-contact type, internal sensor, External sensor, Range
sensor, Proximity sensor, touch sensor, Force and torque sensor, Encoders, etc. 7
Robot Grippers. 3
Robot Controllers 2

Text Text Books:

Books, 1. Fu, K., Gonzalez, R. and Lee, C. S. G., Robotics: Control, Sensing, Vision and
and/or Intelligence¸ McGraw- Hill, 1987.
reference 2. Craig, J. J., Introduction to Robotics: Mechanics and Control, 2nd Edition, Addison-
material Wesley, 1989.
3. Saha, S. K., Introduction to Robotics, TMH Publishing Company Ltd., New Delhi,
2008.
4. Pratihar, D. K., Fundamentals of Robotics, Narosa Publishing House, India, 2017.
Reference Books:
1. Ghosal, A., Robotics: Fundamental Concepts and Analysis, Oxford University Press,
2nd reprint, 2008.
2. Spong, M. W., Hutchison, S., and Vidyasagar, M., Robot Modeling and Control, Wiley
India, New Delhi, 2006.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credit
Code course Core (PCR) / Lecture Tutorial Practical Total
Electives (L) (T) (P) Hour
(PEL) s
MEE Mechanical PEL 3 0 0 3 3
716 Equipment
Design
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 401 Design of CT+EA
Machine Elements &
MEC 503 Machine
Design
Course CO1: Exposure to various types of mechanical elements and their
Outcomes design procedure.
CO2: Ability to design different mechanical systems independently.
CO3: Understand the working of various types of drive systems.
CO4: Dealing with the case studies help develop self-confidence.
Topics Chain Drive
Covered 4
Rope Drive
4

Syllabus for B Tech in Mechanical Engineering

102
 Spiral Bevel Gear Drive
4
CVT Mechanism
4
Design of Pulley and Idlers
5
Design of Worm Gears
4
Cam Mechanisms
4
Disc Brakes
4
Selection of Single-Phase Induction Motors
3
Case Studies
6

Text Text Books:

Books, 1. Black and Adams, Machine Design, McGraw Hill Book Company
and/or Private Ltd., USA, 1973.
reference 2. Phelan R.M., Fundamentals of Mechanical Design, TMH, 2015.
material Reference Books:
1. Burr, Arthur H., and Cheatham, John B., Mechanical Analysis and
Design, Prentice Hall, USA,1995
2. Norton, R.L. , Machine Design: An Integrated Approach

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Control PEL 3 0 0 3 3
717 Systems
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 302, MEC 502 CT+EA
Course
CO1: Will get exposure to the block diagram based formulations,
Outcomes
behavior of linear time continuous control systems.
CO2: Ability to analyze the system performance and relative stability
information.
CO3: Understand the relevance of characteristic roots in the behavior
of various dynamic systems.
CO4: Ability to design simple controllers for analog systems.
CO5: To study and analyze state space methods, controllability and
observability of control systems.
Topics
Introduction to Control, Systems and Elements, Transducers,
Covered
Feedbacks, Classification of systems
Syllabus for B Tech in Mechanical Engineering
103
 3

Mathematical modelling, Block Diagram and Transfer Functions

4
Analysis of Response of simple feedback control systems
5
Structure of Control systems and Control Laws
4
Root locus plot and analysis
5
Stability analysis by frequency response methods – Nyquist and Bode
diagrams 5
State-space representations
5
PID controllers – Analysis and design
5
Digital Control Methods.
2
Design of Control Systems in Matlab Simulink Environment.
2
Examples of Control Systems, Laboratory Exercises.
2
Text Text Books:
Books, 1. Kuo, B. C., Automatic Control System, 3 rd Edition, Prentice Hall Inc.,
and/or New Jarsey, 1975.
reference 2. Nise, N. N., Control Systems Engineering, 6th Edition, John Wiley &
material Sons, Inc., USA, 2011.
Reference Books:
1. Raven, F. H., Automatic Control Engineering, McGraw Hill Book
Company Private Ltd., USA, 1961.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Fundamenta PEL 3 0 0 3 3
718 ls of
Combustion
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 304, MEC 403, CT+EA
MEC 502
Course CO1: To understand the physical process involved in combustion
Outcomes CO2: To be able to model a process involving combustion.
CO3: To acquire an in-depth idea about laminar flames.
CO4: To understand partially premixed flames.
CO5: To learn the intricacies of turbulent flames.

Syllabus for B Tech in Mechanical Engineering

104
Topics
Review of thermodynamics, Chemical kinetics, Mass transfer
Covered
definitions: Fick's law
Equations of conservation of species mass, momentum, and energy;
multi-component diffusion equation
Schvab-Zel'dovich formulation, Rankine-Hugoniot relations.
Laminar premixed flames: Flame speed, flammability limits, flame
stabilization, ignition and quenching.
Laminar diffusion flames: Burke-Schumann problem and droplet
burning.
Partially premixed flames

Text Text Books:

Books, 1. Principles of Combustion – K. K. Kuo
and/or 2. An introduction to combustion – S. R. Turns
reference
material Reference Books:
Combustion physics – C. K. Law

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Modeling PEL 3 0 0 3 3
719 and
Simulation
of Dynamic
Systems
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Engineering Mechanics, CT+EA
Strength of Material,
Dynamics of Machine.
Course CO1 By the end of the course students are able to know the
Outcomes fundamental of modeling and simulation and its usefulness.
CO2 Overview of various modeling software and its usefulness in
development of mathematical model.
CO3 Modeling concept for electro-mechanical, mechatronics systems
and feedback control.
CO4 Interpretation of simulation results and diagnosis of systems.
Topics Introduction to system modeling
Covered 6
Introduction to modeling with examples, introduction to simulation,
MATLAB and Simulink, bond graph and Adams multi-body simulation
tools.
Modeling of dynamic systems
6
Introduction to dynamic systems with examples, bond graph modeling,
causality, generation of system equations, Methods of drawing bond
graph models of electrical and mechanical systems.
Syllabus for B Tech in Mechanical Engineering
105
 Modeling of systems (fundamental model)
8
Fundamental models of mechanical, electrical, hydraulic, pneumatic
and thermal systems, hydraulic and thermal system modeling, examples
of fundamental systems such as two-tank system, thermal damping,
compressor-reservoir system, etc.
Modeling of systems (as a combination of subsystems)
10
Linear and nonlinear systems, modeling of systems: a combination of
translational and rotational systems, hydro-mechanical systems and
electro-mechanical systems, modeling of mechatronic systems and
feedback control of mechanical systems.
Simulation and its applications
10
Simulation using Simulink, bond graph and Adams, simulation of
simple and compound pendulum, simulation of planar mechanisms,
validation of simulation results with examples.
Text Text Books:
Books, 1. Bond graph in modeling simulation and fault identification, Amalendu Mukherjee,
and/or Arun Kumar Samantaray, and Ranjit Karmakar, CRC Press.
reference 2. MATLAB for mechanical engineers, Rao V. Dukkipati, New age International.
material
Reference Books:
1. Measurements, Modelling and Simulation of Dynamic Systems,
Edward Layer, Krzystof Tomczyk, Springer-Verlag Berlin and
Heidelberg GmbH & Co. KG.
2. Modelling and simulation Exploring Dynamic System Behavior,
Louis G. Birta, Gilbert Arbez, Springer London Ltd

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Non-Linear PEL 3 0 0 3 3
720 Vibration
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 301, MEC 302, CT+EA
MEC 504
Course
CO1: Understanding the various characteristics of nonlinear dynamic system.
Outcomes
CO2: Development of solution procedures employing approximate methods.
CO3: Develop the concept of stability and different methods for stability and bifurcation
analysis.
CO4: Analysis of nonlinear system employing numerical techniques and comparing the
results with approximate methods.
Topics
Introduction:
Covered
linear and nonlinear systems, conservative and non-conservative systems; potential well,
Phase planes, types of forces and responses, fixed points, periodic, quasi-periodic and
Syllabus for B Tech in Mechanical Engineering
106
 chaotic responses; Local and global stability; commonly observed nonlinear phenomena:
multiple response, bifurcations, jump phenomena. 9
Analytical solution methods:
Harmonic balance, perturbation techniques (Linstedt-Poincare’, method of Multiple
Scales, Averaging method) 6
Stability and bifurcation analysis:
static and dynamic bifurcations of fixed point and periodic response, different routes to
chaotic response. 6
Numerical techniques:
Time response, phase portrait, FFT, Poincare’ maps, point attractors, limit cycles and their
numerical computation, strange attractors and chaos; Lyapunov exponents and their
determination, basin of attraction: point to point mapping and cell to cell mapping, fractal
dimension. 9
Applications:
Single degree of freedom systems: Free vibration-Duffing’s oscillator; primary-,
secondary-and multiple- resonances; Forced oscillations: Van der Pol’s oscillator;
parametric excitation: Mathieu’s and Hill’s equations, Floquet theory; effects of damping
and nonlinearity. Multi degree of freedom and continuous systems. 10
Text Text Books:
Books, 1. Nayfeh, A. H., and Mook, D. T., Nonlinear Oscillations, Wiley-Interscience, 1979.
and/or 2. Hayashi, C. Nonlinear Oscillations in Physical Systems, McGraw-Hill, 1964.
reference
material Reference Books:
1. Nonlinear Ordinary Differential Equations: An Introduction for Scientists and Engineers,
D. Jordon and P. Smith, Oxford
2. Evan-Ivanowski, R. M., Resonance Oscillations in Mechanical Systems, Elsevier.
3. Nayfeh, A. H., and Balachandran, B., Applied Nonlinear Dynamics, Wiley.
4. Seydel, R., From Equilibrium to Chaos: Practical Bifurcation and Stability Analysis,
Elsevier.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Convective PEL 3 0 0 3 3
721 Heat and
Mass
Transfer
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 303, MEC 304, CT+EA
MEC 403
Course
CO1: To acquire an idea about convective transport mechanism
Outcomes
CO2: To learn the basics of convective heat and mass transfer
CO3: To learn about internal and external convection
CO4: To learn about forced and natural convections
CO5: To learn about heat transfer in phase change
Topics
Fundamental principles: Basic laws of fluid mechanics and
Syllabus for B Tech in Mechanical Engineering
107
Covered
thermodynamics, scale analysis
4
Laminar Boundary Layer: Concept of velocity and temperature
boundary layers, integral solutions, similarity solutions, different wall
heating conditions. 4
Laminar Duct Flow: Heat transfer to developed and developing duct
flows. 4
External natural convection.
4
Internal natural convection.
4
Turbulent boundary layer flow and turbulent duct flow
5
Free turbulent flows: shear layer, jets and plumes.
4
Convection with change of phase.
6
Mass transfer.
7
Text Text Books:
Books, 1. Convection Heat Transfer – A. Bejan
and/or 2. Convective Heat Transfer -- L.C. Burmeister
reference 3. Convective Heat and Mass Transfer – Kays and Crawford
material
Reference Books:
1. Principles of Convective Heat Transfer – M. Kaviany
2. Convective Heat and Mass Transfer – S. M. Ghiaasiaan
3. Heat Convection – L. M. Jiji

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Additive PEL 3 0 0 3 3
722 Manufacturi
ng
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Manufacturing CT+EA
Technology, Machine
Tool
Course
CO1: Able to understand the principles of different additive
Outcomes
manufacturing processes
CO2: Able to learn software’s for additive manufacturing
CO3: Able to expose materials for Additive Manufacturing and it’s

Syllabus for B Tech in Mechanical Engineering

108
 selection
CO4: Able to know areas of usage, possibilities and limitations of the
additive manufacturing technologies
Topics
Covered Introduction to Additive Manufacturing (AM), Overview, History,
Need, Classification, Additive Manufacturing Technology in product
development 2
CAD & Reverse Engineering, CAD model preparation – Part Orientation
and support generation, Model Slicing, Tool path Generation,
Software’s for Additive Manufacturing Technology , Model
Reconstruction – Data Processing for Additive Manufacturing
Technology, Reverse engineering
6
Materials for Additive Manufacturing Technology
4
Different AM processes and relevant process physics, AM process chain
8
Sheet Lamination Processes
1
Photo-polymerization Processes
2
Extrusion-Based Systems
1
Powder Bed Fusion Processes
3
Binder jetting
1
Material jetting
2
Directed Energy Deposition Processes
3
Micro & Nano additive manufacturing processes
4
Design for Additive Manufacturing
3
Applications of Additive Manufacturing
2

Text Text Books:

Books, 1. Ian Gibson, David W. Rosen and Brent Stucker, Additive
and/or manufacturing technologies: rapid prototyping to direct digital
reference manufacturing, Springer.
material 2. C.K. Chua, K.F. Leong and C.S. Lim, 3D Printing and Additive
Manufacturing: Principles and Applications, World Scientific.

Reference Books:
1. Andreas Gebhardt, Understanding additive manufacturing: rapid
prototyping, rapid tooling, rapid manufacturing, Hanser Publishers.

Department of Mechanical Engineering

Syllabus for B Tech in Mechanical Engineering

109
Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Energy PEL 3 0 0 3 3
723 Conversion
Systems
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 601 (Power Plant CT+EA
Engineering)
Course CO1: Acquire an idea about different energy conversion technologies
Outcomes CO2: To learn the energy efficient, economically viable, and
environmental friendly power generation technologies
CO3: To learn about different conventional and non-conventional
power generation systems.
CO4: Introduced to different direct energy conversion systems

Topics
Global and Indian Energy Scenario
Covered
3
Advanced Coal Technologies
6
Advanced Power generation Cycles-Supercritical Power plant,
Cogeneration, Combined cycle power plants
7
Fluidized bed combustion
5
Gasification, Integrated Gasification Combined Cycle (IGCC)
6
Direct Energy Conversion: Fuel Cells: Proton Exchange Membrane
(PEM) Fuel cells, Solid Oxide Fuel Cells (SOFC), Magneto-Hydro-
Dynamic (MHD) Systems 7
Biomass based energy conversion
3
Nuclear Power generation
5
Text Text Books:
Books, 1. Principles of Energy Conversion-Archie W. Culp
and/or 2. Power Plant Engineering-P.K. Nag
reference
material Reference Books:
1. Fluidized Bed Technology-J.R. Howard
2. PEM Fuel Cells: Theory and Practice- Frano Barbir

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi

Syllabus for B Tech in Mechanical Engineering

110
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Hydraulic PEL 3 0 0 3 3
724 Machines
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 303 CT+EA
Course CO1: To acquire an in depth knowledge of hydraulic machines used
Outcomes in the Industry
CO2: To learn the basic design procedure for different hydraulic
machines
Topics Principles of Similarity, Specific Speed and Unit Quantities (4) General
Covered classification of hydraulic machines - basic principles, torque, power
and efficiency. (2) A Brief introduction of 2 D Cascade Theory for
Rotodynamic Machines (4) Hydraulic Turbines: (12) Classification and
types of Turbines. Impulse Turbine:- Pelton Wheel;. Reaction Turbine:-
Francis, Propeller and Kaplan turbines; Effective head, Available head
and efficiency; Force, Torque, Power, Efficiency and Operation of
Turbines; Principles of similarity; Specific speed; Cavitation; Setting of
turbines; Draft tubes; Penstocks; Surge tanks; Performance
characteristics curves; Selection of types and speeds of turbines;
Governing of turbines. Pumps: (12) Pumps: Classification ; Rotodynamic
pumps:- Centrifugal and Axial flow pumps ; Torque, Power, Efficiency
and Operation; Performance Characteristics; Principles of Similarity
and Specific speed; Energy losses in pumps; Cavitation; Priming; Power
requirements; Homologous operation; Series and Parallel operation;
Multistage pumps; Selection and installation of pumps of various
duties; Testing of pumps. Cavitation and setting height of turbo
machines Reciprocating pumps:- Types; Working principle;
Instantaneous discharge and average discharge; Slip; Negative slip,
Coefficient of discharge and volumetric efficiency; Work done and
overall efficiency; Indicator diagram:- effect of inertia and friction on
suction and delivery pipes; Separation head; Effect of bend on delivery
pipe; Air vessels; Power saved by air vessels in overcoming pipe
friction; Discharge in and out of air vessel. Hydraulic coupling; Torque
converter (2)
Text Text Books:
Books, 1. Mechanics of Fluids: Massey, B. S.
and/or 2. Introduction to Fluid Mechanics and Fluid Machines- S.K. Som, et
reference al.
material
3. Hydraulic Machinery - Jagdish Lal

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Hydraulic PCR 0 0 3 3 1.5
751 Machine
Syllabus for B Tech in Mechanical Engineering
111
 Laboratory
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Fluid Mechanics CT+EA
Course CO1: To understand the principle of linear momentum..
Outcomes CO2: To understand the performance characteristics of various pumps.
CO3: To understand the performance characteristics of various turbines.
Topics Performance of Centrifugal Pump.
Covered Performance Test of Reciprocating pump.
Performance Test of Pelton Wheel.
Performance Test of Kaplan Turbine.
Performance Test of Francis Turbine.
Text Text Books:
Books, 1. Mechanics of Fluids: Massey, B. S.
and/or 2. Fluid Mechanics – J. F. Douglas, J. M. Gasiorek, J. A. Swaffied, L. B. Jack
reference 3. Introduction to Fluid Mechanics and Fluid Machines- S.K. Som, et al.
material 4. Hydraulic Machinery - Jagdish Lal
Reference Books:
1. Fluid Mechanics—F. M. White

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MES Machine PCR 0 0 3 3 1.5
752 Design
Sessional - II
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 503 CT+EA
Course CO1: Acquire basic idea about making the design and production drawing for relatively
Outcomes complicated mechanical systems for example gear boxes.
CO2: To understand the method of implementation of engineering tolerances.
CO3: To learn about economic design procedures.
Topics Design and Drawing of Gear Box (36)
Covered Problems as assigned by the concerned teacher (6)
Text Text Books:
Books, 1. Design of Machine Elements – V.B. Bhandari
and/or 2. Design of Machine Elements – M.F. Spotts
reference 3. Machine Design: P. H. Black and O. E. Adams
material 4. Design Data Book – P.S.G. College of Technology, Coimbatore.
Reference Books:
1. Mechanical Engineering Design – J.E. Shigley
2. Fundamentals of Mechanical Design – R.M. Phelan
Syllabus for B Tech in Mechanical Engineering
112
 3. Machine Design: An Integrated Approach – R.L. Norton

Department of Mechanical Engineering

Course Title of the course Program Core Total Number of contact hours Credit
Code (PCR) / Lecture Tutoria Practical Total
Electives (L) l (T) (P)# Hour
(PEL) s
MEO 741 Non- PEL 3 0 0 3 3
conventional
Energy Systems
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))
NA CT+EA
Course
CO1: Identify and explain the use of non-conventional energy systems.
Outcomes
CO2: Develop an understanding that solutions to energy-related problems are complex
involving sociological, economic, political and technological considerations,
decisions and development.
CO3: Gain insight into the issues surrounding non-conventional energy sources
development and use.
CO4: Become knowledgeable about applications of non-conventional energy systems as
they apply to commercial, residential and industrial markets.
Topics Traditional energy systems, Sources, Features and characteristics,
Covered applications 2
Component of solar energy systems, Collector types and performances,
Radiation and meteorological data processing, Long term conversion
factors, System conversion and system design procedures, Solar power
generation, Solar heating and cooling, Solar passive systems: Solar
still, Pond, Greenhouse, Dryer, Trombe wall, Overhangs and Wing
walls.
13
Wind energy conversion systems, Estimate of wind energy potential,
Aerodynamic and mechanical aspects of wind machine design.
4
Principles and applications of wave energy, Shoreline systems, Near
shore systems, Off shore systems
3
Tidal energy, Biomass energy, Operating principle, Wood gassifier,
Pyrolysis, Applications,
4
Geothermal energy and OTEC.
4
Fuel cell: Types and technology status.
3
Hydel Power Plant: Introduction to hydro-electric power generation,
Types of Hydel turbines, Layout and selection of turbines and
installation, Geographic limitations, Turbine performance, Comparative
analysis between thermal and hydel plants. 9

Syllabus for B Tech in Mechanical Engineering

113
Text Books, Suggested Text Books:
and/or 1) Solar Energy Fundamentals and Applications-- Garg and Prakash
reference 2) Solar Energy-- S. P. Sukhatme
material
Suggested reference books:
1) Fundamentals of Renewable Energy Systems-- D. Mukherjee and S. Chakrabarti
2) Non-conventional Energy Sources-- D. S. Chauhan and S. K. Srivastava

Department of Mechanical Engineering

Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (L) l (T) (P)# Hour
(PEL) s
MEE 810 Solar Energy PEL 3 0 0 3 3
Pre-requisites Course Assessment methods (Continuous (CT) and end assessment
(EA))
MEC 304, MEC403, MEC 502, CT+EA
MEC 601
Course
CO1: Identify and explain the use of active, passive solar thermal systems.
Outcomes
CO2: Develop an understanding that solutions to energy-related problems are complex
involving sociological, economic, political and technological considerations,
decisions and development.
CO3: Gain insight into the issues surrounding solar energy development and use.
CO4: Become knowledgeable about applications as they apply to commercial, residential
and industrial markets.
Topics
Solar Radiation and Measurements: 7
Covered
Solar energy option - an overview, Fundamentals of solar radiation, Basic Earth sun-
angles, Solar time and equation of time, measurements, Empirical equations for
predicting the availability of solar radiation, Computation of radiation on a surface

Syllabus for B Tech in Mechanical Engineering

114
 Liquid Flat Plate Collectors: 8
Liquid flat plate collector design, Efficiency of flat plate collectors and performance
analysis,
Flat plate solar air heaters, Other types of solar air heaters, some novel designs,
Performance analysis and testing procedures.
Solar Concentric Collectors: 6
Cylindrical parabolic collectors, Performance analysis of cylindrical parabolic
collectors, Compound parabolic concentrating collectors, Performance analysis of
compound parabolic concentrating collectors, Paraboloid dish collectors.
Solar Thermal Energy Storage system: 5
Need of thermal energy storage, Size and duration of storage, Sensible heat storage,
Latent heat storage, PCM, Thermo-chemical energy storage.
Solar Thermal Applications: 8
Solar space heating, active systems, passive system - Trombe wall, Solar refrigeration
and air conditioning, Solar cookers, Solar desalination, Solar dryers, Solar ponds and
its thermal performance, Solar energy for industrial process heat
Solar Thermo-Mechanical Power Generation: 8
Principles of solar engines, limitation of solar mechanical power conversion, Types of
solar power plants, Solar chimney, Parabolic through power plants, Central receiver
power plants. Solar furnaces.
Text Books, Suggested Text Books:
and/or 1. Sukhatme S. P., “Solar Energy: Principles of Thermal Collection and Storage,” 3 rd
reference Ed., Tata McGraw-Hill Publishing Company Ltd.
material 2. H. P. Garg and J. Prakash, Solar Energy: fundamentals and applications, 1 st Ed.,
Tata McGraw-Hill Publishing Company Ltd.
Suggested Reference Books:
1. Solar energy Process – Duffie and Beckman, John Wiley

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Mechatronic PEL 3 0 0 3 3
811 s
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC 301, MEC 504 CT+EA
Course CO1: Students will be able to identify the importance of amalgamation
Outcomes between the electronics and electro-mechanical systems.
CO2: Students will be able to formulate and evaluate behavior of
linear time continuous control systems.
CO3: Students will be able to formulate the procedure for converting
analog signals to digital form and vice-versa.
CO4: Students will be able to describe signals and its processing by
modern electronic methods.
CO5: Students will be able to identify and critically evaluate current
developments and emerging trends within the field of
mechatronic systems.

Topics Mechatronic Systems: Introduction, Application of Mechatronics.

Syllabus for B Tech in Mechanical Engineering

115
Covered 2
Sensors and Transducers - Brief review, Simple electronic elements &
Operational Amplifiers.
4
Actuators: Pneumatic, Hydraulic, Electrical & Mechanical actuation
system, Micro-actuators.
3
Modelling and Simulation of Physical System: System models, Dynamic
responses of the system, System transfer functions.
4
Digital logic: Number systems, Boolean algebra, Logic gates -
Application gate, Design of logic of digital logic gates.
5
Microprocessors and Micro-Controllers: Introduction, Microprocessor
Architecture, Instruction codes, General requirements for
implementation issues, Examples. 6
Programmable Logic Controllers: Basic structure, I/O processing,
Programming, Timer, Inter relays and Counters.
6
Signal conditioning & Digital communication system: Basics of signal
conditioning, Filtering, Data acquisition and Digital signal processing,
Digital communication and Communication interface.
6
Mechatronic Systems, Case Studies.
6

Text Text Books:

Books, 1. Alciatore, D. G. and Histand, M. B., Introduction to Mechatronics
and/or and Measurement Systems, McGraw Hill Publications, 4th Edition,
reference 2012.
material 2. Bolton, W., Mechatronics, Pearson Education India, 2008.
3. Gaonkar, R.S., Microprocessor Architecture, Programming and
Applications with 8085, Penram Publishers India, 6th Edition, 2013.
Reference Books:
1. Malvino, A. P., and Bates, D. J., Electronic Principles, TMH
Publishing Company Ltd., New Delhi, 8th Edition, 2016.
2. Nise, N. N., Control Systems Engineering, 6th Edition, John Wiley &
Sons, Inc., USA, 2011.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Micro and PEL 3 0 0 3 3
812 Nano
Manufacturi
ng
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Syllabus for B Tech in Mechanical Engineering
116
MEC402 (Casting, Forming and CT+EA
Welding), MEC501 (Machining
and Machine Tools)
Course CO1 : To understand the need for micro and nano scale fabrication
Outcomes CO2 : To get acquainted with different micro and nano scale fabrication techniques and
their characterization
CO3 : To be able to select a suitable micro or nano scale fabrication process based upon the
requirement
CO4 : To compare and understand the differences between macro and nano scale
fabrication processes

Topics Need for Micro and Nano Scale Manufacturing Processes : Examples of
Covered micro and nano scale parts being used in various applications, How the
performances of micro/nano scale components are better AFM, STM,
SEM, TEM, XRD, 2
Photo Lithography : Historical perspective, Overview,
Electromagnetic Spectrum
Clean Room – Classes, Features
Photoresist: Positive and Negative Photo resists; Glass Transition
Temperature, Photoresist deposition: Spin coating, Spray coating,
Electro-deposition; Baking, Masks, Exposure: Contact Printing,
Projection Printing, Proximity Printing, Development, Critical
Dimension, Overall Resolution, Line Width Metrology, Resist Profiles,
Photolithography Resolution Enhancement Technology : through
Improved Resist Performance, through Improved Mask Technology,
through Improved Exposure Technology Reducing the minimum feature
dimension in photolithography
Examples
10
Dry Etching
Definitions, Plasma, Physics of plasma, Sputtering or Ion Etching, Ion
Beam Milling, Plasma Etching, Deep Reactive Ion Etching (DRIE), ICP,
Examples 3
Wet Etching
Chemical Milling, Photochemical Milling, Wet Isotropic and Anisotropic
Etching, Etch Stop Techniques,
3
Moore’s Law , Need for pushing the feature sizes to lower levels,
Next Generation Lithographic Techniques : EUV , XRL, LIGA, EBL :
EBL Resists, electron emission, Ion Beam Lithography, Nano Imprint
Lithography, Lithographic techniques still in research and
developmental state Examples 12
Physical Vapor Deposition: Thermal evaporation, Sputtering– DC and
RF Sputtering, Pulsed Laser Deposition – Laser sputtering, Aerosol
Deposition Examples 4
Chemical Vapor Deposition: Overview, description, PVD vs CVD,
APCVD, LPCVD, PECVD, ALD, Examples
4
Micro and Nano Scale Joining Techniques.
2

Text Text Books:

Books, 1. Fundamental of Microfabrication and Nanotechnology Volume 2,
and/or
Syllabus for B Tech in Mechanical Engineering
117
reference by Prof Marc J Madou, CRC Press, Taylor and Francis Group
material 2. Micro and Nanomanufacturing, Mark J Jackson, Springerlink
3. Micro and Nanomanufacturing Volume 2, Mark J Jackson,
Springerlink

Reference Books:
Micro/Nano Manufacturing, Hans Nørgaard Hansen and Guido Tosello,
MDPI Publishing (for application examples)

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Microfluidic PEL 3 0 0 3 3
813 s
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
MEC303 Fluid Mechanics CT+EA
MEC304 Engineering
Thermodynamics
MEC403Heat and Mass
Transfer
PHC01 Engineering Physics
CYC01 Engineering Chemistry
BTC01 Life Science
Course
CO1: To learn micro channel flows with heat transfer.
Outcomes
CO2: To learn Surface Tension Driven Flows with real life applications.
CO3: To learn Electro-hydro-dynamics fundamentals
CO4: To learn Molecular Dynamics Simulations
Topics Introduction to Microfluidics: Origin, Definition, Benefits, Challenges,
Covered Commercial activities, Physics of miniaturization, Scaling laws,
Intermolecular forces, States of matter, Continuum assumption,
Governing equations, Constitutive relations 1
Microfluidics- Some Application Examples: Drug delivery, Diagnostics,
Bio-sensing 1
Equations of Conservation
1
Navier Stokes Equation
2
Energy Equation
2
Pressure –driven Micro flows: Exact solutions, Couette flow, Poiseuille
flow 5
Some Examples of Unsteady Flows: Hydraulic resistance and Circuit
analysis, Straight channel of different cross-sections, Channels in series
Syllabus for B Tech in Mechanical Engineering
118
 and parallel. 3
Stokes Drag on a Sphere: Stokes drag on a sphere, Time-dependent
flows, Two-phase flows
2
Lubrication Theory
2
Boundary Condition in Fluid Mechanics - Slip or No-slip: Gas and liquid
flows, Boundary conditions, Slip theory, Transition to turbulence, Low
Re flows, Entrance effects
2
Surface Tension Driven Flows: Surface tension and interfacial energy,
Young-Laplace equation, Contact angle, Capillary length and capillary
rise, Interfacial boundary conditions, Marangoni effect
6
Thin Film Dynamics
4
Introduction to Micro-fabrication: Materials, Clean room, Silicon
crystallography, Miller indices. Oxidation, photolithography-mask, spin
coating, exposure and development, Etching, Bulk and Surface
micromachining, Wafer bonding. Polymer micro fabrication,
PMMA/COC/PDMS substrates, micro molding, hot embossing, fluidic
interconnections. Electrokinetics: Electrohydrodynamics fundamentals.
Electro-osmosis, Debye layer, Thin EDL limit, Ideal electro-osmotic
flow, Ideal EOF with back pressure, Cascade electro-osmotic micro
pump, EOF of power-law fluids.
Electrophoresis of particles, Electrophoretic mobility, Electrophoretic
velocity dependence on particle size.
Dielectrophoresis, Induced polarization and DEP, Point dipole in a
dielectric fluid, DEP force on a dielectric sphere, DEP particle trapping,
AC DEP force on a dielectric sphere.
Electro-capillary effects, Continuous electro-wetting, Direct electro-
wetting, Electro-wetting on dielectric
4
Dispersion, Introduction to Nano fluidics, Introduction to Molecular
Dynamics Simulations, Bio microfluidics, Nano fluidic Energy
Conversion 4

Text Text Books:

Books, 1) Microfluidics - Stéphane Colin
and/or 2) Micro- and Nanoscale Fluid Mechanics, Transport in Microfluidic Devices- Brian
reference Kirby, Cambridge University Press .
material
Reference Books:
1) Theoretical Microfluidics- Henrik Bruus , Oxford University Press.
2) Fundamentals and Applications of Microfluidics: Nam- Trung Nguyen and Steven T.
Wereley

Syllabus for B Tech in Mechanical Engineering

119
 Department of Mechanical Engineering
Course Title of the Program Total Number of contact hours Cred
Code course Core (PCR) / Lectu Tutori Practic Tota it
Electives re (L) al (T) al (P) l
(PEL) Hou
rs
MEE Machine Tool PEL 3 0 0 3 3
814 Engineering
and
Automation
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
ME 402 CT+EA
Course CO1: In depth study of mechanical machine tools construction and design.
Outcomes CO2: Introduction to machine tools automation.

Topics General principles of Machine Tool design, Machine Tool drives and mechanisms. 2
Covered Design of speed and feed gear box, Optimum design principles for using double bound
gears. 12
Design of Machine Tool structures: beds, slides and guides, selection of bearing for
machine tools. 3
Hydrostatic and Hydrodynamic lubrication in Machine Tool slide ways and Guides, Stick-
slip motion in Machine Tool slide ways. 3
Machine tool rigidity, system compliance and process capability of machine tools. 4
Machine tool inspection, testing and maintenance. 2
Overview on Automation: Definition, application, advantages and disadvantages. Types of
automation: fixed automation (automatic machines, transfer devices and semi-automatics),
Programmable automation (NC, CNC and machining centres, DNC, adaptive control
machines, Industrial robots, CAD/CAM, CIM) and flexible automation (FMS). 5
CNC Hardware: Constructional features, operational characteristics of CNC machine tools,
Machine tool drives, sensing devices, open and close loop control 3
CNC machining, part programming, NC tool path generation. 8
Text Text Books:
Books, 1. Principles of Machine Tools – Sen and Bhattacharya
and/or 2. Computer Controlled of Manufacturing Systems – Y. Koren
reference Reference Books:
material 1. Machine Tool Engineering – N. K. Mehta
2. Numerical Control and Computer Aided Manufacturing – Kundra, Rao and Tiwari

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Theory of PEL 3 0 0 3 3
815 Plates

Syllabus for B Tech in Mechanical Engineering

120
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Engineering Mechanics, CT+EA
Strength of Materials
Course
CO1:Concept of various plate theory
Outcomes
CO2:Derivation of governing equation using virtual displacement
theory
CO3: Analysis of plates

Topics Stress strain relations, strain displacement relation, equations of

Covered equilibrium, virtual work principle, Classical plate theory, FSDT,
HSDT. 8
Pure bending and cylindrical bending of isotropic rectangular plates,
Navier and Levy solutions of rectangular plates.
8
Bending of circular plates.
6
Bending analysis of laminated composites plates.
8
Approximate solution methods for plate problems.
6
Dynamics of Plates.
6

Text Text Books:

Books, 1. Theory of plates By K. Chandrashekhara (Universities Press)
and/or 2. Theory and analysis of elastic plates and shells By J. N.
reference Reddy(CRC Press)
material 3. Theory of plates and shells By S. P. Timoshenko and S. W.
Krieger(Tata Mcgraw-Hill)
Reference Books:
1. Theory and analysis of plates classical and numerical methods By
R. Szilard (Prentice Hall)

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEE Advanced PEL 3 0 0 3 3
816 Mechanical
Vibration
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
Fundamentals of CT+EA
Vibrations
Course CO1: Understanding the fundamental material for a modern
Outcomes treatment of vibrations.

Syllabus for B Tech in Mechanical Engineering

121
 CO2: Application of Lagrange equations for lumped and continuous
systems
CO3: Understanding fundamentals of beam theory; extensional,
torsional, and flexural vibrations of beams.
CO4: Understanding Self-excited vibration, nonlinear vibration etc.
Topics Review of relevant mathematics: linear algebra
Covered 3
Generalized co-ordinates, Lagrange's equations
3
Single-DOF and multi-DOF vibration
7
Vibration Absorber
2
Torsional vibration
4
Periodic excitation and Fourier series, impulse and step response
5
Vibration in continuous systems
4
Self-excited vibration, Criterion of stability; Effect of friction
5
Introduction to nonlinear vibration
7

Text Text Books:

Books, 1. Mechanical Vibrations, S. S. Rao, Pearson Education Inc. (4th
and/or Ed.), 2007.
reference 2. Fundamental of Vibrations Leonard Meirovitch, Mc-Graw Hill
material Inc., 2001
3. Vibration and Control, D. J. Inman, John Willey & Sons Inc, 2002

Reference Books:
1. Mechanical Vibrations, S. Tamadonni & Graham S. Kelly, Schaum’s
Out line Series, Mc-Graw Hill Inc, 1998.
2. Vibration Condition Monitoring of Machines, J. S. Rao, Tata Mc-
Graw Hill, 2006.

Department of Mechanical Engineering

Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
Syllabus for B Tech in Mechanical Engineering
122
MEO Nonlinear PEL 3 0 0 3 3
841 Dynamical
Systems
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NA CT+EA
Course
CO1: To learn stability analysis of nonlinear transient problems in
Outcomes
all fields.
CO2: To learn Chaos of nonlinear transient problems using
dynamical behaviors (Bifurcations, FFT, Poincare Maps,
Lyapunav exponents, Henon maps and Fractals)
Topics One- Dimensional Flow: Flows on the line, fixed points and stability,
Covered linear stability, real life problem and exercises; Flows on circle, Fixed
points and stability, real life problem and exercises; Bifurcations: Types
of bifurcations, Normal forms of saddle-node , transcritical, pitchfork,
Supercritical and Subcritical bifurcations,and imperfect berfercations
real life problem and exercises
12
Two -Dimensional Flows: Linear system, Definitions and examples,
Classification of Linear system, Exercises, Phase plane, Phase
portraits, Fixed points and Linearization of nonlinear systems,
Exercises, Limit cycles, Definition and understanding with examples,
Poincare theory, FFT of time series data, Exercises, Bifurcations of 2-D
system, Saddle-node, Transcritical and Pitchfork Bifurcations, Hopf
Bifurcations and its type with normal form, Hopf point and fold points,
Hysteresis zone, Poincare map, FFT and phase portrait, Exercises
15
Chaos: Lorenz Equations, Properties of Lorenz Equations, Lorenz map,
Exploring parameter Space, Exercises, One-Dimensional Maps, Fixed
points and Cobwebs, Logistic maps, Lyapunov Exponent, Exercises,
Fractals, Countable and uncountable sets, Cantor Sets, Dimension of a
self, similar Fractals, Box dimension, Point wise Correlation
Dimensions, Exercises, Strange attractor, Simplest examples, Henon
map, Physical examples, Exercises.
15

Text Text Books:

Books, 1. Nonlinear dynamics and Chaos by S. H. Strogatz
and/or
reference Reference Books:
material 1. Chaos and nonlinear dynamics by R. C. Hilborn
2. Differential dynamical systems by J. D. Meiss

Department of Mechanical Engineering

(For Electrical Engineering Students)
Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P) Hours
MEC 431 Fluid and PCR 3 0 0 3 3
Thermal
Engineering
Pre-requisites Knowledge of Engg Mechanics, differential equation etc
Syllabus for B Tech in Mechanical Engineering
123
Course CO1: To learn the basics of Fluid Mechanics
Outcomes CO2: To learn the basics of Hydraulic machines
CO3: To learn the basics of Thermodynamics
CO4: To learn the basics of Power Plant Engineering

Topics Definition of Fluid, Difference between fluid and solid, continuum concept, Knudsen No.
Covered density, specific volume ,bulk modulus, compressibility of fluid.(01)
Viscosity, Newton,s law of viscosity , different types of fluid, Effect of pressure and
temperature on viscosity, numerical problems ( 02)
Fluid pressure, hydrostatic law of pressure,pressure variation with space in static fluid,
abs. gauge and vacuum pressure, pressure measuring devices, numerical problems (03)
Fluid kinematics, definition of flow field, Lagrangian and Eulerian approach of describing
fluid motion. (01)
Representatation of velocity and acceleration in ccartesian coordinate, temporal,
convective and total acceleration. (01)
Steady and unsteady flow, uniform and non uniform flow, laminar and turbulent flow,
flow visualisation, stream line and path line.( 01)
Differential form of continuity equation in Cartesian form for compressible and
incompressible flow.( 01)
Derivation of Euler’s equation along a stream line, Benaullis equation, pressure head ,
kinetic head, datum head. (01)
Application of Benaullis equation, flow measuring devices, venturimeter, orificemeter,
pitot tube, numerical problems.( 03)
Hydraulic machines, dynamic force on fixed and moving vanes (01)
Turbine and its classification, pelton turbine and its working principle, numerical problems
(02)
Pump and its classification, reciprocating pump and its working principle (01)
Centrifugal pump,working principle, velocity diagram, characteristics curve, numerical
problem (03)
Brief study of thermodynamics as a prerequisite for power plant engineering:
Energy analysis of steady state flow system, example with mechanical power transfer to
and from steady state flow devices like compressor, turbine, etc. System equilibrium,
requirement for internal and total reversibility, causes of effect of irreversibility,concept of
heat engine ,its working cycle, its efficiency with Carnot cycle, Effect of increase in
saturation pressure on phase transformation, properties of steam, use of steam table,
Mollier chart . (10)
Basic devices in steam power plant and their schematic arrangement, fundamental concept
of processes involved in them, simple rankine cycle with steady flow of working fluid
(water and steam), performance parameter for efficient plant operation, effect of increase
in boiler pressure on operating cycle performance, internal and external irreversibility
associated with various practical processes during energy and mass transfer through the
devices, Reheat, regeneration and their combined application for improvement of plant
operation, a few numerical problems, Brief description of super heater, economiser in
power plant. (10)
Introduction to gas turbine power plant: (01)

Text Books, Text Books:

and/or 1. Hydraulics and Fluid Mechanics – Jagdish Lal

Syllabus for B Tech in Mechanical Engineering

124
reference 2. Hydraulic Machinery – Jagdish Lal
material 3.Introduction to Fluid Mechanics and Fluid Machines – S K Som and G Biswas
4. Engineering Thermodynamics – P K Nag
5. Introduction to Power Plant Engg- P K Nag

Reference Books:
1. Introduction to Fluid Mechanics – Fox, Mcdonald and Pritchard

Department of Mechanical Engineering

(for Chemical Engineering)
Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
MEC Mechanical PCR 3 0 0 3 3
432 Design of
Equipment
and
Components
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
NIL CT+EA
Course CO1 System to control volume formulation
Outcomes CO2 Mathematical formulation of laws of thermodynamics
CO3 Properties of pure substances
CO4 Knowledge of stress and strain
CO5 Principles of machine design

Topics Relation between system and control volume approaches.

Covered 2
Equation of states.
2
Zeroth, first and second law of thermodynamics.
2
Gouy-Stodola theorem. (1) Applications of SFEE.
2
Carnot cycle, reversed Carnot cycle, Heat engine, heat pump and
refrigerators. 2
First and second law based performances.
2
Properties of pure substances, Vapour power cycle―Rankine cycle.
4
Air standard cycles―Otto, Diesel, dual and Joule-Brayton cycles.
3
Review of stress, strain and deformation.
2
Engineering materials and their properties.
2
General principle of machine design.
2

Syllabus for B Tech in Mechanical Engineering

125
 Factor of safety.
2
Use of data book in mechanical design.
2
Design of shaft and key.
2
Mechanical drives: Introduction to simple gear drive and belt drive.
4
Types of pressure vessels: Thin cylinder and thick cylinder.
4
Text Text Books:
Books, 1. P. K. Nag, Engineering Thermodynamics, McGraw-Hill.
and/or 2. E. Fermi, Thermodynamics, Dover.
reference 3. V B Vhandari, Design of Machine elements [3rd edition]
material
Reference Books:
1. M. Planck. Treatise on thermodynamics. Dover.
2. E. P. Gyftopoulos, G. P. Beretta, Thermodynamics: Foundations and
applications, Dover.

Department of Mechanical Engineering

(for Electrical Engineering)
Course Title of the Program Core Total Number of contact hours Credit
Code course (PCR) / Lecture Tutoria Practical Total
Electives (PEL) (L) l (T) (P)# Hours
MES 481 Fluid and PCR 0 0 3 3 2
Thermal
Engineering.
Sessional
Pre-requisites Theory of fluid machine and power plant engineering
Course CO1: To understand the principle of calibration.
Outcomes CO2: To understand the major losses in pipe flow.
CO3: To understand the principle of linear momentum.
CO4: To understand the performance characteristics of various turbines.
CO5: To understand the performance characteristics of centrifugal pump.
CO6: To understand the function, construction of Lancashire Boiler.
CO7: To understand the principle of diesel and petrol engine.

Topics 1.Calibration of venturimeter

Covered 2. Friction loss computation in pipe flow
3. Performance of Centrifugal Pump.
4. Performance Test of Pelton Wheel.
5. Performance Test of Francis Turbine.
6.Calibration of Vacuum gauge (Bourdon Gauge Tube)
7.Model study of Lancashire Boiler
8.To study the performance of four stroke petrol engine
9. To study the performance of diesel engine using rope brake dynamometer under
variable load condition

Text Books, Suggested Text Books:

and/or 1) Introduction to Fluid Mechanics-R. W. Fox and A. T. McDonald. Pritchard
Syllabus for B Tech in Mechanical Engineering
126
reference 2) Introduction to Fluid Mechanics and Fluid Machines- S.K. Som and G. Biswas
material 3) Introduction to Power Plant Engg- P K Nag
Suggested Reference Books:

1) Fluid Mechanics – J. F. Douglas, J. M. Gasiorek, J. A. Swaffied, L. B. Jack

Department of Mechanical Engineering

(for Chemical Engineering)
Course Title of the Program Total Number of contact hours Credi
Code course Core (PCR) / Lecture Tutorial Practic Total t
Electives (L) (T) al (P) Hour
(PEL) s
WSS Workshop PCR 0 0 3 3 1.5
481 Practice II
Pre-requisites Course Assessment methods (Continuous (CT) and end
assessment (EA))
CT+EA
Course
Outcomes
Topics M/c shop -- 3X6=18hrs.
Covered  Mechanism and function of different parts of machine tool.
 Machining operations:
1) Machining of shaft and knurling by lathe.
2) Thread cutting by lathe.
3) Taper turning by lathe.
4) Machining of gear blank by lathe.
5) Making of Square Bar by shaper.
6) Machining of surface by shaper.
7) Spur gear cutting by milling.
 Introduction of two and three axis CNC m/cs.
 Explanation of ‘G’ and ‘M’ Codes.
Pattern shop -- 3X3=9hrs
 Description of wooden pattern.
 Types of pattern, pattern allowance.
 Layout and design of pattern making.
 Making of V-block.
Foundry shop -- 3X3= 9hrs
 Preparation of sand mould using Solid/Split Pattern.
 Aluminium casting using the prepared mould.
 Determination of properties of Green Moulding Sand using Sand
Testing Equipments.
 Foundry Tooling Design.
Viva voce -- 1X3= 3hrs.
Text Text Books:
Books,
and/or
reference
material

Syllabus for B Tech in Mechanical Engineering

127