Honeywell GTCP331-200 APU
Proposal
For
Hainan Airlines
APU, S/N P-2886
06 July 2012
H+S Proposal Number Q5917
H+S Aviation Limited Tel +44 23 9230 4129
Airport Service Road Fax +44 23 9230 4352
Portsmouth Email:
[email protected]Hampshire, PO3 5PJ www.hsaviation.co.uk
United Kingdom Registered in England & Wales No 422128, VAT GB 183 3721 61
H+S AVIATION AND THE HONEYWELL GTCP331-200 APU
Low Costs
H+S offers an extensive repair capability for GTCP331-200 APU
internal components and LRU’s, delivering low cost of ownership.
Use of the Honeywell Manual and/or Honeywell Workscope Planning
Guide (WPG) to select repair workscopes that minimise repair costs.
Optional application of DER repairs, subject to prior review and
acceptance by Hainan on a “case-by-case” basis, to recover
components that would otherwise be outside repairable limits.
Flexibility and Customer Service
Rapid Turntimes.
Flexibility to tailor repair workscopes, timescales and documentation
to suit your specific needs
Regular communication and status reports
Confidence
Honeywell Authorised Service Centre status for 331-200 and 331-250
APU models.
OEM warranty administration.
A ‘one stop shop’ for all of your GTCP331-200 requirements
Comprehensive capability from minor repairs to full overhaul
Extensive LRU repair capability
Rental APU’s
On-wing repairs and troubleshooting assistance
Table of Contents
1.0 Introduction
2.0 Fulfilling Hainan Airlines’ Needs
3.0 Commercial Proposal
Appendix 1 331-200/250 APU Accessory Repair Capability
Appendix 2 331-200/250 APU Component Repair Capability
1.0 INTRODUCTION
This document has been prepared following correspondence between Hainan
Airlines and H+S Aviation regarding the Honeywell GTCP331-200 APU’s, S/N P-
2886 removed from B767. It presents our proposal to provide repair and
refurbishment services for this APU on a Time and Material basis.
The proposal is valid for 3 months following the date on the cover and is subject to
contract and H+S standard terms and conditions of trading.
2.0 FULFILLING HAINAN AIRLINES’ NEEDS
H+S Aviation offers a comprehensive service for the GTCP331-200 APU. We are a
Honeywell Authorised Service Centre for this APU and have full EASA and FAA
Approval to carry out any workscope, notably:
Minor repairs and troubleshooting
Major repair / refurbishment
APU Testing
Accessory repair and refurbishment
Our flexible and personalised service offers the following benefits to Hainan Airlines.
Direct Operating Cost Savings through Longer Time on Wing: H+S Aviation has
developed a reputation in the market for building reliable APU’s that stay on wing
longer. We will work with Hainan Airlines to develop repair workscopes for its APU’s
that offer an optimum balance between shop visit cost and reliability, delivering cost
savings by reducing the frequency of future shop visits.
This strategy has the added benefit of minimising flight delays and aircraft
unavailability.
Shop Visit Cost Savings through Maximising Repair of Components: H+S is a
leading organisation in the APU market for the development of component repair
schemes. This enables us to repair many components that other shops would scrap,
saving you thousands of dollars in shop visit costs.
Keeping your Aircraft Flying: We offer some of the fastest turntimes in the market
for GTCP331-200 APU repairs. Our standard turntime for a repair is 30 days
assuming workscope to repair Load Compressor Section due to “Low Pressure
reported during APU bleed”.
By offering fast turntimes we return APU’s to you quickly to enable you to keep your
fleet flying. This minimises the need for loan APU’s and could also enable you to
reduce the number of spare APU’s needed to support your fleet.
Our 24 hour, 365 day a year AOG service will also keep you moving when you are
short of a critical item.
Single Source Service: H+S can perform any type of repair work for the GTCP331-
200 APU, so you can entrust the complete support of your GTCP331-200 fleet to us
as a ‘one stop shop’.
As a Honeywell 331-200/250 Authorised Service Centre we can carry out all
workscopes on the GTCP331-200 APU including OEM Warranty and Service
Bulletin work. We are also able to perform field repairs where appropriate, sending
teams of engineers and technicians to your facility to perform this work.
We can also support a number of the GTCP331-200 APU’s accessories and would
be pleased to receive field removed accessory units in addition to complete APU’s.
Lower Administration Burden: At H+S we are focused on providing the highest
levels of Customer Service. We will appoint a dedicated team to support Hainan
Airlines’ needs providing weekly status reports, engine condition reports, cost
estimates and to answer any technical or commercial questions you have whilst we
repair your APU’s. Our aim is to keep you up to date with all aspects of your APU
repairs so that you are never waiting on us for status or other information.
We are also highly flexible in meeting your specific needs, and can tailor APU final
finish standard, documentation styles and transportation arrangements to suit your
business needs.
Our Independence means that You come First: Because we are completely
independent, with no ties to an OEM or Operator, the only thing that drives us is
providing great service to you. With H+S you can be assured that your interests get
priority.
3.0 COMMERCIAL PROPOSAL
3.1 Time and Material Charges
Our proposed charges for Time and Materials work on the Honeywell GTCP331-200
APU are as follows:
Fixed labour (see Note 1 below) $19,500
Labour Rate $69.00
New Materials Honeywell List Price plus 7%
Used Serviceable Materials Honeywell List Price less 30%
Customer Supplied Materials Handling fee 9% of New List Price
LRU & Component Repairs See Appendices 1 and 2
Subcontracted Repairs Repair Cost Plus 2%
Exchange Materials Fee 0% of New List Price
Consumables (Cleaning fluids, $2,950
lubricants, NDT mediums, etc)
APU Test Fee including Fuel & Oil $2,850 includes special discount
of $2100 off 2012 test fee of $4950
Shipping including import/export H+S will bear one way standard
shipping from UK to Beijing
Note 1: the fixed labour fee of $19,500 for APU, S/N P-2886 assumes repair of Load
Compressor Section due to “Low Pressure reported during APU bleed”. It excludes
labour charges due to additional work required to repair APU.
Note 2: as per Hainan’s Special Request in RFQ 2012-7-APU, H+S Aviation may
offer DER repairs/replacement parts subject to prior review and acceptance by
Hainan Airlines on a “case-by-case” basis
Note 3: H+S Aviation shall maintain ETOPS compliance of GTCP331-200ER APU.
Note 4: Payment terms are within 45 days after date of invoice
Note 5: If the TAT of 30 days, to repair APU, S/N P-2886 removed for “Low Pressure
reported during APU bleed” assuming repair of Load Compressor Section based on
normal wear and tear is exceeded then daily compensation of $175 applies up to a
maximum of 20 days. Compensation does not apply if additional work is required to
repair the APU.
3.2 Warranty
H+S offers the following Workmanship Warranty for the Honeywell GTCP331-200
APU.
2,000 APU Hours or 18 months, whichever occurs first
3.3 Rental APUs
To support the operational requirements of our Customers, H+S Aviation maintains a
range of APU’s available for short term rental. Our Rental Bank includes GTCP 331-
200 units for B767 aircraft.
The special rates we can offer Hainan for a GTCP 331-200 rental unit are as follows:
Hourly Rate $79 per APU hour
Daily Rate $495*
Test and Recertification Fee $2,850 includes special
discount of $2100 off 2012 standard test cell fee of $4950
Minimum charge $19,500
Hainan are responsible for transportation charges should they have need of a rental
APU during repair of P-2886 at H+S Aviation.
Should Hainan need a rental APU while P-2886 at H+S Aviation for repair then one
may be made available for collection within 24 hours of receipt of the following:
Purchase Order requesting lease APU
Copy of signed lease agreement
Copy of Operator’s liability insurance showing APU is adequately insured
during lease period
*In the event of genuine AOG H+S will offer to support Hainan with a rental APU at a
reduced daily lease rate of $395. Other rates as above.
2012 Not to Exceed (NTE) Price for Repair $179,950
Work-scopes covered
1. Refurbishment / Repair of an APU removed for ‘timex’, ‘soft life’ or ‘lease return’
2. Refurbishment / Repair of an APU removed due to normal wear & tear
This NTE covers the Labour, Material, Repair & APU / LRU Test costs for normal
wear and tear in accordance with the OEM Manual for a GTCP331-200 APU.
Exclusions to NTE
1. Damage to the APU caused by an incident or accident, lightning strike, over-
torque, over-speed, foreign objects, misuse, neglect or failure to maintain in
accordance with OEM manuals and APU failures involving metal generation,
failure to rotate or abnormal erosion or corrosion.
2. Repair or Replacement due to non OEM approved parts or repairs
3. Replacement of Missing Parts & LRU’s
4. Service Bulletins and Airworthiness Directives
5. Replacement or non standard Repair of LLP’s, Blades & Compressor Rotors
6. Replacement or non standard Repair of major housings and stators
7. Repair of LRU’s
8. Damage considered beyond normal fair wear and tear
9. Use of new parts at Customers request when exchange or reconditioned parts
are available.
10. Any tax or duty payable by the Customer including taxes or import/export
duties.
Beyond Economic Repair
If the estimated repair costs of the APU on a time and material basis exceed the fair
market value of a serviceable GTCP331-200 APU or 65% of the new catalogue
price, the APU will be deemed BER. APU’s deemed BER will not be repaired within
the NTE figure. BER APU’s can either be returned loosely reassembled to the
Customer, repaired on a time and material basis or alternate options discussed.
APPENDIX 1
GTCP331-200 ACCESSORY REPAIR CAPABILITY AND PRICING
H+S 2012 Repair Price,
Part Number Description Repair Descriptions
Excluding Parts
96487 Solenoid Valve Bench Check $185
968214 Valve Assy Bench Check $185
160126 Oil Cooler Clean, Flush and Test $906
160126 Oil Cooler Major Repair $2,348
160176 Oil Cooler Clean, Flush and Test $906
160176 Oil Cooler Major Repair $2,348
160186 Oil Cooler Clean, Flush and Test $906
160186 Oil Cooler Major Repair $2,348
305766 Igniter Plug - High Functional Check $185
397728 Fan Shut-off Valve Bench Check $185
519858 Starter Motor Brush Wear and Bench Check $377
519858 Starter Motor Major Repair $3,605
979806 Surge Control Valve Bench Check $185
3289504 Gearbox Regulating Valve Bench Check $185
3289504 Gearbox Regulating Valve Repair $925
3289514 Gearbox Shut-off Valve Bench Check $185
3289514 Gearbox Shut-off Valve Repair $925
3290594 Variable Volume Chamber Bench Check $185
3614400 Flow Sensor Module Functional Check $1,653
3614400 Flow Sensor Module Repair $3,286
3616848 Gearbox Shut-off Valve Bench Check $268
3876023 Oil Temperature Switch Bench Check $185
3876024 Low Oil Pressure Switch Bench Check $185
3876027 Thermocouples (set of 4) Bench Check $185
3876035 Inlet Pressure Sensor Bench Check $268
3876047 De-Oil Solenoid Valve Bench Check $185
3876048 Pressure Switch Bench Check $185
3876059 Oil Level Switch Bench Check $185
3876072 Sensor Bench Check $185
3876084 P3 Pressure Sensor Bench Check $185
3876085 Delta P Sensor Bench Check $185
3876086 Flow Sensor Bench Check $377
3876166 De-Oil Solenoid Valve Bench Check $185
3882491 Primary Fuel Nozzles and Manifold Clean and Rig Test $542
3882491 Primary Fuel Nozzles and Manifold Overhaul $1,819
3882492 Secondary Fuel Nozzles and Manifold Clean and Rig Test $542
3882492 Secondary Fuel Nozzles and Manifold Overhaul $1,819
3882500 Fuel Control Assembly Bench Check $906
3882500 Fuel Control Assembly Minor Repair $1,270
3882500 Fuel Control Assembly Major Repair $2,182
3882550 Flow Divider Bench Check $542
3882550 Flow Divider Major Repair $2,182
3886167 IGV Actuator Bench Check $377
3888058 Ignition Exciter Bench Check $185
3888123 Electrical Harness Bench Check $377
3888123 Electrical Harness Major Repair $2,182
3888208 Electrical Harness Bench Check $377
3888208 Electrical Harness Major Repair $2,182
3888466 Electrical Harness Bench Check $377
3888466 Electrical Harness Major Repair $2,182
MS28034 Oil Temperature Detector Bench Check $89
MS28035 Oil Temperature Detector Bench Check $89
APPENDIX 2
GTCP331-200 COMPONENT REPAIR CAPABILITY AND PRICING
Part H+S 2012 Repair Price,
Number Description Repair Descriptions Excluding Parts
3612887 IGV Gear Ring Rebond bearing ring $268
3613194 Heat Shield See Part No 3844268
3615139 Inlet Screen Replace cracked strap $447
3615139 Inlet Screen Weld repair broken screen $1,819
3616978 Cooling Fan Housing Embody SB-49-7281 $5,041
3616978 Cooling Fan Housing Replace Bearing Bush $1,442
3810123 IGV Cover Assembly Restore Surface Treatment $578
3810123 IGV Cover Assembly Replace Worn Gearshaft Sector Bush $377
3810127 Bearing Housing Restore Surface J $1,574
3810127 Bearing Housing Replace Inserts $542
3810127 Bearing Housing Restore Diameter L $2,412
3810127 Bearing Housing Restore Diameter B $2,632
3810127 Bearing Housing Repair cracks at surface M and diameters E & N $2,791
3810127 Bearing Housing Repair Diameter AV and Dimension AR $1,797
3810127 Bearing Housing Restore Surface Treatment $702
3810138 Compressor Shroud Restore Surface Treatment $906
3810176 Inlet Housing Restore Surface Treatment $1,442
3810187 Bearing Inlet Housing Restore Surface Treatment $774
3810187 Bearing Inlet Housing Replace Inserts $542
3810187 Bearing Inlet Housing Repair cracks at Diameter N into Dim E $3,465
3810187 Bearing Inlet Housing Restore Diameter N $906
3810187 Bearing Inlet Housing Restore Diameter M $3,079
3810187 Bearing Inlet Housing Restore Diameter B $2,775
3810187 Bearing Inlet Housing Replace Bearing Liner $906
3810187 Bearing Inlet Housing Restore Dia F $906
3810198 Inlet Screen Replace cracked strap $447
3810198 Inlet Screen Weld repair broken screen $1,819
3810198 Inlet Screen Replace Mating Seal $232
3810210 Insert Sound Attenuator Restore Surface Treatment $906
3810213 Plenum - Upper Restore Surface Treatment $1,104
3810213 Plenum - Upper Embody SB-49-7496 $1,819
3810213 Plenum - Upper Replace broken access panel retainers $702
3810213 Plenum - Upper Repair Damaged Boss $1,104
3810213 Plenum - Upper Weld repair cracks in upper flange $1,104
3810213 Plenum - Upper Replace Sheared Rivets $263
3810213 Plenum - Upper Replace Sensor Bracket $2,315
3810214 Plenum - Lower Repair Damaged Nut Plate(s) $702
3810214 Plenum - Lower Restore Surface Treatment $1,104
3810214 Plenum - Lower Replace Damaged Receptacles $1,442
3810214 Plenum - Lower Replace Damaged Straps $702
3810224 IGV Housing Replace inserts $542
3810224 IGV Housing Repair Cracked Struts $1,819
3810224 IGV Housing Replace Bearing (Pre or Post SB 49-6948) $2,884
3810224 IGV Housing Restore Diameter B $3,605
3810224 IGV Housing Restore Surface F $2,884
3810224 IGV Housing Restore Diameter G $2,884
3810224 IGV Housing Restore Diameter E $2,884
3810224 IGV Housing Restore Surface J $2,884
3810224 IGV Housing Restore Shroud Contour $3,286
3810224 IGV Housing Embody SB 49-5713 $1,442
3810224 IGV Housing Embody SB 49-6948 $1,442
3810224 IGV Housing Restore Surface Treatment $1,104
3810228 Plenum - Lower Repair Damaged Nut Plate(s) $702
3810228 Plenum - Lower Restore Surface Treatment $1,104
3810228 Plenum - Lower Replace Damaged Receptacle $1,442
3810229 Plenum - Upper Restore Surface Treatment $1,104
3810229 Plenum - Upper Crack Repair Oil Cooler Bracket $447
3810259 Inlet Housing Replace Loose/damaged studs $919
3810259 Inlet Housing Restore Surface Treatment $1,250
3810259 Inlet Housing Weld Repair Cracks $1,712
3810259 Inlet Housing Restore Diameter B $1,915
3810259 Inlet Housing Restore Diameter K $4,371
3822057 Rotor Seal Restore Surface $377
3822067 1st Stage Compressor Rotor Restore Diameter H $1,442
3822067 1st Stage Compressor Rotor Blend Repair $1,442
3822068 2nd Stage Compressor Rotor Blend Repair $1,442
3822077 Tie Shaft Replace Splined Coupling (SB 49-5827) $1,442
3822077 Tie Shaft Restore Diameters C and/or D $2,540
3822080 Compressor Rotor Blend Repair $1,442
3822493 Rotor Seal Restore Surface $377
3826125 Carrier Restore diameter 'E' $2,182
3826135 Compressor Inlet Housing See Part No 3826138
3826138 Compressor Inlet Housing Restore Diameter B $906
3826138 Compressor Inlet Housing Restore Surf A $2,160
3826138 Compressor Inlet Housing Restore Diameter P $2,292
3826138 Compressor Inlet Housing Restore Diameter E $2,292
3826138 Compressor Inlet Housing Restore Surf D $2,292
3826138 Compressor Inlet Housing Restore Airflow Contour $2,182
3826138 Compressor Inlet Housing Replace Pins $906
Driven Compressor Scroll
$2,182
3826140 Housing Restore Surface Treatment
Driven Compressor Scroll
$702
3826140 Housing Replace Inserts
Driven Compressor Scroll
$2,182
3826140 Housing Restore Shroud Profile
Driven Compressor Scroll
$1,819
3826140 Housing Remove Broken Bolts
3826141 Back Shroud Assembly Restore Surface Treatment $1,104
3826141 Back Shroud Assembly Restore Seal mating Faces $1,104
3826141 Back Shroud Assembly Restore Diameter K $906
3826141 Back Shroud Assembly Restore Dimension F $906
3826154 Mount Replace Worn Pivot Bushes $1,819
3826176 Shield Weld Repair $695
3826230 1st Stage Diffuser Assembly Re-new dowty seals $377
3826230 1st Stage Diffuser Assembly Blend Leading Edges of Vanes $906
3826230 1st Stage Diffuser Assembly Replace Studs $268
3826230 1st Stage Diffuser Assembly Restore Diameter D $2,048
3826230 1st Stage Diffuser Assembly Restore Diameter B $2,376
3826527 Bell Crank Assembly Replace bushing $542
1st Stage Turbine Wheel
Part of main build labour
3840002 Assembly Install Turbine Blades and Balance
2nd Stage Turbine Wheel
Part of main build labour
3840006 Assembly Install Turbine Blades and Balance
3840007 2nd Stage Turbine Disk Glass Bead Peen Fir Tree Roots $702
3840011 Rotor Seal Curvic Coupling Restore Diameter B or D $2,182
3840011 Rotor Seal Curvic Coupling Embody SB-49-5410 (Machine Diameter D) $906
3840019 1st Stage Turbine Disk Glass Bead Peen Fir Tree Roots $702
3840020 Third Stage Turbine Blisk Blend Repair $2,182
3840020 Third Stage Turbine Blisk Replace Cooling Rivets $906
3840022 Third Stage Turbine Blisk Blend Repair $2,182
3840022 Third Stage Turbine Blisk Replace Cooling Rivets $906
3844001 Transition Liner Replace Studs or Bolts $1,334
3844002 Labyrinth Seal See Part No 3844050
3844006 Split Ring Remove Broken Bolts $906
3844006 Split Ring Remove Broken Studs Qty 1-4 $542
3844006 Split Ring Remove Broken Studs Qty 5 or more $1,104
3844007 1st Stage Turbine Stator Support Restore Dia B $3,605
3844007 1st Stage Turbine Stator Support Restore Dimension F $3,605
3844007 1st Stage Turbine Stator Support Repair cracks in flange area $1,819
3844008 1st Stage Turbine Shroud Restore Diameter H $2,182
3844008 1st Stage Turbine Shroud Restore Diameter B $2,218
3844008 1st Stage Turbine Shroud Restore Diameter F $2,078
3844008 1st Stage Turbine Shroud Restore Diameter G $2,151
3844011 2nd Stage Stator Assembly Dismantle Vane Ring Assembly $542
3844011 2nd Stage Stator Assembly Replace Seal Assembly $2,540
3844011 2nd Stage Stator Assembly Repair Rivet Holes in Seal Assembly $542
3844011 2nd Stage Stator Assembly Repair Rivet Holes in Seal Retainer $542
3844011 2nd Stage Stator Assembly Repair Rivet Holes in Piston Seal $542
3844011 2nd Stage Stator Assembly Assemble Stator Assembly $1,819
3844011 2nd Stage Stator Assembly Restore Surface A $2,540
3844011 2nd Stage Stator Assembly Restore Diameter AA $2,884
3844011 2nd Stage Stator Assembly Restore Diameter CA $2,884
3844011 2nd Stage Stator Assembly Restore Diameter G $2,884
3844011 2nd Stage Stator Assembly Repair of location Lugs $2,348
3rd Stage Turbine Stator Disassemble for Repair, Assemble and Rivet to $906
3844018 Assembly Make Assembly
3rd Stage Turbine Stator
$1,442
3844018 Assembly Replace seal element
3rd Stage Turbine Stator
$268
3844018 Assembly Repair Rivet Holes (seal)
3rd Stage Turbine Stator
$377
3844018 Assembly Repair Rivet Holes (retainer, turbine seal)
3rd Stage Turbine Stator
$2,540
3844018 Assembly Restore Surface A
3rd Stage Turbine Stator
$3,605
3844018 Assembly Replace Honeycomb Seal and Refit Seal Carrier
3844028 Support Assy - Turbine Bearing Local weld repair $1,442
3844043 3rd Stage Turbine Stator Seal Restore Surface A
3844043 3rd Stage Turbine Stator Seal Drill new rivet holes $906
3844050 Labyrinth Seal Replace Honeycomb Seal $1,819
3844050 Labyrinth Seal Restore Surface A $1,819
3844050 Labyrinth Seal Restore Diameter B $1,819
3844050 Labyrinth Seal Restore Diameter H $1,819
3844050 Labyrinth Seal Modify Seal Element (SB 5883) $1,819
3844053 Combustion Case Remove broken studs, quantity 1-4 studs $702
3844053 Combustion Case Remove broken studs, quantity 5-8 studs $1,442
3844053 Combustion Case Remove broken studs, quantity 9 or more studs $2,182
3844053 Combustion Case Remove Broken Bolts $542
3844065 Turbine Seal Assembly Replace Carbon Seal $906
3844065 Turbine Seal Assembly Repair Seal Surface $542
3844078 Drain Bracket Weld Repair Cracks $447
3844080 Baffle Embody SB GTCP331-49-7340 $702
3844080 Baffle Embody SB GTCP331-49-6622 $702
3844199 Heat Shield See Part No 3844268
3844268 Heat Shield Remove Air Deflector $260
3844268 Heat Shield Replace Seal Post SB 49-5967 and Paint $1,397
3844268 Heat Shield Modify Silicone Seal (SB 49-5967) $1,313
3844268 Heat Shield Modify Silicone Seal (SB 49-5968) $1,313
3844268 Heat Shield Repair Cracks or broken welds $1,104
3844268 Heat Shield Replace nutplates $1,104
3844268 Heat Shield Modify riveted nutplates $1,104
3844268 Heat Shield Modify to thicker skin (SB 49-5691 or 5623) $1,104
3850008 Cone - Turbine Tail Weld Repair Cracks $447
3850010 Exhaust Muffler Weld Cracks $1,852
3862163 Cooling Fan Stator Embody SB-49-7281 $702
3862211 Cap and Adapter Assembly Re-rivet retaining chain $447
3862699 Gearbox Housing Replace loose or damaged studs $1,772
3862699 Gearbox Housing Replace restrictors and plugs $1,509
3862699 Gearbox Housing General Blend repair $906
3862699 Gearbox Housing Bearing anti-rotation pin replacement $906
3880170 Shield Retainer Oil Inlet Weld repair fretting damage $447
3880210 Oil Filter Assy Repair $906
3880393 Oil Cooler Bracket Restore Surface Treatment $377
3880393 Oil Cooler Bracket Replace Nutplate $377
3880393 Oil Cooler Bracket Weld Repair Cracks $447
3882505 FCU Housing Embody SB-49-7156 $2,540
3882697 FCU Gear Shaft Embody SB-49-7156 $1,270
3884238 Tee Duct Cold work damaged flange $268
3884562 Cooling Fan Discharge Housing Embody SB-49-7281 $702
3884703 Seal Retainer Replace Pin $525
3884703 Seal Retainer Restore diameter 'F' $1,939
3884703 Seal Retainer Embody SB-49-7281 $542
