Scribd
Upload
605 views1 page

GIW Technical Series: Impeller Lifting Jigs

Lifting jigs provide a safe means to install and remove pump impellers. GIW designs and manufactures lifting jigs for standard and custom pumps according to ASME safety standards. The jigs are individually built, tested, and certified with multiple lifting points, leveling features, and identifying markings. Customers can order lifting jigs for new pumps or existing equipment by providing part numbers and serial numbers to ensure compatibility.

Uploaded by

Travis Skinner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
605 views1 page

GIW Technical Series: Impeller Lifting Jigs

Lifting jigs provide a safe means to install and remove pump impellers. GIW designs and manufactures lifting jigs for standard and custom pumps according to ASME safety standards. The jigs are individually built, tested, and certified with multiple lifting points, leveling features, and identifying markings. Customers can order lifting jigs for new pumps or existing equipment by providing part numbers and serial numbers to ensure compatibility.

Uploaded by

Travis Skinner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GIW Technical Series

Impeller Lifting Jigs

Safety is a prime concern in every plant operation

Lifting Jigs provide a means to install and


remove pump impellers. GIW now offers
these tools for standard and custom pump
designs.

Finished in bright Safety Yellow paint, these


tools are CAD designed according to ASME
B30.20 with welded steel plate construction.

Each jig is built to order, tested and certified.

Most standard designs have multiple lifting


points and a threaded leveler to align the
impeller for easy installation. Custom designs
are available for virtually any pump part.

Each lift jig is marked with the Working Load


Limit (WLL) and GIW part number for fast
identification.

These are available as an option when


ordering new pumps or from GIW Part Sales
for existing equipment. Impeller part numbers
and pump serial numbers are required to
select the correct lift jig for each application.

These Lifting Jigs are not designed for or


intended to lift personnel or to transport parts
directly over occupied areas. Observe all
safety procedures when using this equipment.

Contact your local GIW/KSB representative for more information.

Use GIW Impeller Lifting Jigs for pump maintenance and lift employee safety to new heights!

TECH Impeller Lift Jigs 2007-11-15.doc

You might also like