NOTES:

1. REFER TO THE CAD MODEL FOR ADDITIONAL DATA NOT CONTAINED

IN THIS DRAWING. UNLESS OTHERWISE SPECIFIED, UNDIMENSIONED
MACHINED SURFACES, EDGES 0.80 A B m C .

2. CUTTING, FORMING, AND PRESERVATIVE FLUIDS ARE TO BE A E

DOCUMENTED AND APPROVED PER OPS-SPEC-00930.

3. BREAK ALL SHARP EDGES, REMOVE ALL BURRS.

4 MACHINING OPERATIONS MUST NOT PENENTRATE BASE WEB SURFACE OR PRODUCE UNDERCUT.

5. ALL EXTERNAL PART SURFACE REQUIRE BLAST FINISH WITH 0.50 MM 97.74
STAINLESS STEEL SHOT. 10.26 0.13
D m| E | F m 3X 59.13 R3.20 0.10
6 FINAL MACHINING TO BE DONE AFTER BLASTING. 12.13 0.13
C | D m| E
7 FINAL MACHINING OF ALL MACHINED SURFACES TO BE DONE AFTER PAINTING.

POWDERCOATING.
OR
8 POLARIS LOGO TO BE MACHINED AFTER PAINTING.
F
6.10
9. UNLESS OTHERWISE SPECIFIED SURFACE ROUGHNESS
ON MACHINED SURFACES 1.6 MICRONS MAX.

10. PAINT PERFORMANCE: ALL PAINTED COMPONENTS MUST USE POLARIS APPROVED MATERIALS SECTION X-X
PER ENG-STND-0035, ANY LUBRICANTS, RUST PREVENTATIVES, CLEANERS, OR OTHER
PROCESS FLUIDS MUST BE DOCUMENTED AND APPROVED PER OPS-SPEC-00930. 3X 36.53

11. PAINT FINISH: BASE METAL FINISH CONDITIONS PER ENG-STND-00490, CLASS 2, D
POWDER PAINT PER ENG-STND-0018, CLASS 2. SHALL MEET REQUIREMENTS PER
ENG-STND-00465, CLASS 2.

12. ALL SURFACES ARE "B" SURFACES UNLESS OTHERWISE SPECIFIED. E C

13. SEE BOM OR PURCHASE ORDER FOR PAINT CODE DASH NUMBERS.

11.11
A
A | D m| E A1
3.25 11.11

A1

A | C

A | C
9.53 0.10
2X 10.26 0.13
C | D m| E C

C1 8.50 0.20
A2

+0.05
38.10 4 25.89
0
246.09 0.20
C1 232.94
A2

188.96 0.20 25.89

9.50 0.20 9.13

135.94
A | C
4 110.94
B1
116.89 0.20
B1

( n28.72 ) B
2X 45.0 $X 0.65
A3
R6.00 0.25
R4.50 0.25 B
A3 14.21
4.06
18.268 E
62.27 14.22 0.25 48.02 0.22 4.61
18.247
A | B %| C 7.25 26.11
73.05 0.25
C
A A
E
E D
SECTION Y-Y
SECTION X-X

-- 5910696 SPINDLE-FORGE LH --
PER POLARIS INDUSTRIES SUPPLIER QUALITY ASSURANCE MANUAL ITEM PART NO. PART NAME QTY
(SQAM) ALL PROCESS CHANGE REQUESTS MUST BE SUBMITTED
MASS: 1197.95 g
3
THROUGH THE PCR PROCESS VOLUME: 442049 mm
UNLESS OTHERWISE FIFTEEN (15) KEY PRODUCT CHARACTERISTICS METRIC DRAWING - mm
SPECIFIED THIS DRAWING CONFORMS PRODUCT LINE
3D MODEL - Creo Parametric
A
TOLERANCE: TO ASME Y14.5M - 1994 CONFIDENTIAL PROPERTY OF
FOR DOCUMENTATION
PRACTICES SNOW NAME DATE
X # 0.8
THIRD ANGLE PROJECTION
XX # 0.50 INDUSTRIES INC. DRAWN BY P.KOKANE 01-APR-19
XXX # Notice to persons receiving this drawing: Unless otherwise
indicated, POLARIS INDUSTRIES INC., claims proprietary rights

ANGLE # 1.0 ° in the material shown on this drawing. This drawing may not
be reproduced for any reason without written permission from
DESIGNER L.WILSON 01-APR-19

SCALE
POLARIS.
Neither this drawing or any reproduction of this drawing may
CHECKER -- --
DO NOT SCALE
be used to manufacture anything shown or similar to disclosure
shown hereon without permission in writing from POLARIS. All

2:3 rights of design or invention are reserved.

ENGINEER -- --
A INITIAL RELEASE PMK 25-JUN-19 MATERIAL AND SPECIFICATIONS PART NAME PART NO. SIZE REV
REV APR DESCRIPTION BY DATE SEE ABOVE SPINDLE-MACH LH 5143047 D E
WIP 25-JUN-19 SHEET 1 OF 2
MODEL VER
E.0
DRAWING VER
E.0

PDMLink-R4
5 4 3 2 1
 E

4 6 7
6 7

4 6 7

4 6 7

6 7

6 7
SECTION Z-Z
SECTION X-X B

ITEM PART NO. PART NAME QTY

MASS: 1197.95 g
3
VOLUME: 442049 mm
UNLESS OTHERWISE KEY PRODUCT CHARACTERISTICS: SEE SHEET 1 METRIC DRAWING - mm
SPECIFIED THIS DRAWING CONFORMS PRODUCT LINE
3D MODEL - Creo Parametric
A
TOLERANCE: TO ASME Y14.5M - 1994 CONFIDENTIAL PROPERTY OF
FOR DOCUMENTATION
PRACTICES SNOW NAME DATE
X # 0.8
THIRD ANGLE PROJECTION
XX # 0.50 INDUSTRIES INC. DRAWN BY P.KOKANE 01-APR-19
XXX # Notice to persons receiving this drawing: Unless otherwise
indicated, POLARIS INDUSTRIES INC., claims proprietary rights

ANGLE # 1.0 ° in the material shown on this drawing. This drawing may not
be reproduced for any reason without written permission from
DESIGNER L.WILSON 01-APR-19

SCALE
POLARIS.
Neither this drawing or any reproduction of this drawing may
CHECKER -- --
DO NOT SCALE
be used to manufacture anything shown or similar to disclosure
shown hereon without permission in writing from POLARIS. All

2:3 rights of design or invention are reserved.

ENGINEER -- --
MATERIAL AND SPECIFICATIONS PART NAME PART NO. SIZE REV

SEE ABOVE SPINDLE-MACH LH 5143047 D E

MODEL VER DRAWING VER
SHEET 2 OF 2 E.0 E.0

PDMLink-R4
5 4 3 2 1