Scribd
Upload
497 views1 page

Compact Thermostat DMO 1140 & DMS 1141

This document summarizes the specifications of two small thermostats: The DMO 1140 is a normally closed thermostat contact breaker used to regulate heaters with an adjustable temperature range of 0-60°C and contact breaking capacity of 6A at 250V AC. The DMS 1141 is a normally open thermostat contact maker used to regulate fans and heat exchangers or switch signal transmitters when temperature limits are exceeded, with the same adjustable temperature range and 6A contact rating at 250V AC. Both thermostats have a bimetal sensor element, snap action contact, mount on a 35mm DIN rail, and measure 60 x 33 x 35mm.

Uploaded by

Khairul Fatah Talha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
497 views1 page

Compact Thermostat DMO 1140 & DMS 1141

This document summarizes the specifications of two small thermostats: The DMO 1140 is a normally closed thermostat contact breaker used to regulate heaters with an adjustable temperature range of 0-60°C and contact breaking capacity of 6A at 250V AC. The DMS 1141 is a normally open thermostat contact maker used to regulate fans and heat exchangers or switch signal transmitters when temperature limits are exceeded, with the same adjustable temperature range and 6A contact rating at 250V AC. Both thermostats have a bimetal sensor element, snap action contact, mount on a 35mm DIN rail, and measure 60 x 33 x 35mm.

Uploaded by

Khairul Fatah Talha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SMALL THERMOSTAT

SMALL THERMOSTAT
DMO 1140
DMS 1141

Simple to mount
Large setting range
Small size

DMO 1140: Thermostat (normally closed)


contact breaker for regulating heaters.
DMS 1141: Thermostat (normally open) contact
maker for regulation of filter fans and heat
exchangers or for switching signal transmitters
when temperature limit has been exceeded.

Technical: DMO 1140, DMS 1141


Sensor element: Thermostatic bimetal
Temperature range: Adjustable (0-60℃)
Temperature switch difference approx. 7K
Contact type: Break or Make
Snap action contact
Breaking capacity:
DMO 1140,break contact: 6A(1) 250V AC
Heater

DMS 1141, make contact: 6A(1) 250V AC

Interference suppression grade: N (VDE 0875)


Connections: 2 poles terminal 2.5mm2
Mounting: Clip for 35mm
DIN rail (EN 50022)
Dimensions:60 x 33 x 35mm (H x W x D) e.g. Fan
Casing: Plastic, UL94 V0
Total Metering Solution Sdn Bhd
Weight: 36g 22&22A, Jalan Anggerik Vanilla 31/93
Protection type:IP20 Kota Kemuning, 40460 Shah Alam
Selangor
Phone: +603-51220029, Fax: +603-51220079
Email: [email protected]

You might also like