SHENZHEN GROWATT NEW ENERGY TECHNOLOGY CO.

,LTD
No.28 Guangming Road, Shiyan Street, Bao’an District,
Shenzhen, P.R.China
T
F
+ 86 755 2747 1942
+ 86 755 2747 2131
S hineMaster User Manual
E [email protected]
W www.ginverter.com
 CONTENT

1 A bout the user manual

1.1 Manual description
1.2 Copyright statement
1.3 Applicable personnel
1.4 Manual use

2 Product description
2.1 Device Overview
2.2 Unpacking
2.3 ShineMaster Network
Introduction

3 Installation and
Connection
3.1 ShineMaster installation
environment
3.2 ShineMaster installation method
3.3 Connect to the photovoltaic device

4 ShineMaster built-in page

parameter setting 4.1 ShineMaster IP address query
4.2 ShineMaster built-in page access
4.3 ShineMaster Status View
4.4 ShineMaster Datalogger managing
4.5 Baud Rate Setting
4.6 Ser ver Address and Shine Master
IP setting
 1 About the user manual

1.1 Manual description

5 S erver: Shineserver’s Dear users, thank you very much for using the ShineMaster data logger (hereinafter
operation
5.1 Registration and login referred to as ShineMaster) developed and produced by Shenzhen Growatt New Energy
5.2 View monitoring data Co., Ltd. (hereinafter referred to as Growatt). We sincerely hope that this product will
5.3 Add or Delete Monitoring devices, meet your needs and expect you give more opinions on the performance and function of
change the ShineMaster Baud rate the product. The purpose of this manual is to provide users with detailed product
information and instructions for installation, operation, and maintenance.

1.2 Copyright statement

6 Device Maintenance This user manual is copyrighted by Growatt. Any unit or individual may not excerpt or
copy part or all of this user's manual without the written permission of the company. It
6.1 Common faults and troubleshooting may not be transmitted in any form, including materials and publications. Infringement
6.2 Maintenance
must be investigated.
The version of this manual is V1.1. Growatt owns the final interpretation right of this
user manual. If there is any change in product parameters, appearance, packaging, etc.,
the latest information of the company shall prevail without notice.

1.3 Applicable personnel

7 Technical specifications
This manual is for professional technicians who install, commission, and maintain the
ShineMaster and for users who perform daily operations. This manual does not include
7.1 ShineMaster specification electrical connections for inverters, combiner boxes, weather stations, smart meters, and
anti-reflux devices, as well as related precautions. If necessary, refer to Growatt's
corresponding user manual or instruction.

8 Contact us 1.4 Manual usage

Please read this manual carefully before using ShineMaster. At the same time, please keep
this manual in a safe place so that operators and maintenance personnel can find out. The
contents of the manual will be continuously updated and corrected. It is inevitable that
there will be slight inaccuracies or errors in the actual contents. Users should refer to the
actual product purchased. The latest user manuals can be downloaded from
www.ginverter.com, and can also be obtained through Growatt's sales or service
channels.

1
2 Product description

2.1 Device Overview

Item Name Function

F
A POWER Power supply port

B KEY Reset button (temporarily unavailable)

M
L
K
I
J C SIM SIM card slot
H
G

Antenna, used to receive wireless signals

D ANTENNA
(Temporarily not supported)

RJ45 port：Connect Shine ShineMaster to the local

E LAN
network area of Shine Server through RJ45 cable

F RS-485 Two-way RS485 interface

D

C Table 2-1
A
B

2.1.2 Indicator Led

Fig.2-1
ShineMaster is equipped with seven LED indicators. The status of the ShineMaster can be
2.1.1 Interface
displayed by the LED indicator. As shown in figure 2-1 and table 2-2 above.

The interface of ShineMaster, as shown in figure 2-1 above.

The functional description of each interface is shown in table 2-1.

2 3
 A B C
Item Name Function

Power indicator light, constant on means power

G Power LED
supply is normal

Network light:
1: off means fail to obtain IP address;
H Network LED
2: flashing means connecting to the server ;
3:on means connection to the server successfully

The number of the LED continuously flashing means

I Device LED
the device number connected to the ShineMaster D E F G

Configuration Flashing when configuration , if successful , the LED

J
LED will be off （temporarily unavailable）

K RF RF signal indicator （temporarily unavailable）

Fig 2-2
L WiFi WiFi signal indicator（temporarily unavailable）

Item Name Amount

M 2G/4G 2G/4G signal indicator（temporarily unavailable）

A ShineMaster 1 pcs
table 2-2
B 5V power adapter 1 pcs

2.2 Unpacking C Terminal RS485 1 pcs

D Wall plastic column 4 pcs

2.2.1 Packing List
E M3.5*20 screw 4 pcs

F ShineMaster user manual 1 pcs

ShineMaster and accessories can be found as below figure 2-2：

G Ethernet cable 1 pcs

Table 2-4

4 5
2 .2.2 Serial No. and Check Code

The ShineMaster serial No. （S/N） and check code（C/C）is ticked on the ShineMaster’s
package box, which have 10 digits mixed up with letters and numbers. the serial No. and
check code for each device are unique, to identify each ShineMaster. When you want to
upload the data of ShineMaster to the server, you need the serial No. and ‘check code’
corresponding to register on the server

2.3 ShineMaster Network Introduction

ShineMaster supports network communication, which can be communicated via wired

WLAN, wireless WiFi, 2G/4G, GPRS and cloud server. Upload the monitored data to the
server of Growatt, and then access the server's domain name. Realize industrial common
communication mode RS485 and wireless RF communication, also supports wired and
wireless communication ways to monitor and set slave devices and perform online
upgrades on devices. By accessing ShineMaster's internal IP address, you can enter the
built-in page for parameter setting and device addition viewing (please refer to section
4.4 below).

ShineMaster monitors the photovoltaic devices through RS485 and RF(temporarily not
supported). The diagram below shows the schematic diagram of network monitoring
through wired RS485.

Note: The precondition of local access is that the address of PC and ShineMaster must be
in the same domain, thereby building up a local monitoring system.

Fig 2-5

6 7
3 Installation and Connection
The installation steps are as follows:
(1) Install ShineMaster on a vertical plane or horizontal plane.
(2) Connect cables between RS485 interface and RS485 interface on ShineMaster (please
refer to 3.3.1 below for details)
(3) Connect the network cable (insert the network line into the LAN interface on
ShineMaster).
(4) Connect the Power supply (connect the power cord to the Power interface on
3.1 ShineMaster installation
ShineMaster).

The installation environment of ShineMaster and communication with other devices: 3.3 Connect to the photovoltaic device
(1) Indoor installation, temperature - 40 ~ 60℃ , avoid moisture and direct sunlight.
(2) Cable RS485 in maximum 500m.
ShineMaster can communicate with the inverter, weather station, smart meter, combiner
box and other photovoltaic devices to achieve the purpose of data collection.

3.2 ShineMaster installation 3 .3.1 RS485 cable connection

3.2.1 Installation Procedure 1.ShineMaster (master) communicates with slave devices via RS485 wired connection.
485A+ on the RS485 port of the slave device corresponds to A1+ or A2+ on the
ShineMaster 485 port, 485B- and ShineMaster 485 on the RS485 port of the slave device.
Corresponding to B1- or B2-. The following is a schematic diagram of the connection
between the ShineMaster and the inverter:
Note: the RS485 shielded wire must be ground (PE) for long distance communication, so
as not to affect the communication stability.

8 9
2. Note that the inverter also has an interface like the one below: 2. Go to the router's management page and check the "Internet host list" to query the IP
address of the ShineMaster IP address with the serial number of the ShineMaster as the
device name. This IP address is the IP address assigned by the router to the ShineMaster. If
you do not know how to do this, contact your network administrator to perform the
operation.
Note: The router needs to enable automatic IP assignment, that is, open the DHCP
function
3. Enter the ShineMaster IP address in the browser to enter the ShineMaster internal page

4.2 ShineMaster built-in page access

Before accessing, check whether the communication cable between the devices is
securely connected.then you can enter the ShineMaster IP address in the IE browser to
access the built-in page of ShineMaster. As long as the ShineMaster is on the same
domain as the computer you are accessing, you can access the Shine WebBox built-in
server.
1.If the user successfully access the ShineMaster internal page, you can directly enter the
3.The inverters are connected to the ShineMaster via RS485 serial connection. Using the built-in page login interface, as shown in Figure 4-1
RS485 wired communication connection, the ShineMaster can monitor up to 32 inverters
stably.
4.The ways of ShineMaster connection to Smart meter, combiner box and environmental
monitor are similar to the connection of inverters. The weather station can be connected
to the inverter in series, and the communication line of the smart meter can be directly
connected to the ShineMaster RS485 port.
Note: The weather station, combiner, and smart meter manufacturers must be
designated by Growatt, otherwise monitoring will not be possible.

4 ShineMaster Internal Page

4.1 ShineMaster IP address query

Fig 4-1
1. Connect the PC computer and the ShineMaster LAN port to the network port of the
router through the network cable so that they are in the same LAN. 2．Enter the user name and password, the default login user name: admin password:
admin, fill in and click on login to enter the Growatt ShineMaster system page.

10 11
4 .3 ShineMaster Status View 4.4.1 Add device

Click the ShineMaster datalogger Status to view information such as the “System Status (1) Before ShineMaster monitors photovoltaic equipment, it is necessary to enter the
Information”, “Serial Number”, “Server Address”, “Number of Connected Devices”, “ShineMaster Data Collector Settings” page of the built-in page to add devices.
etc. of the ShineMaster

(2) In the second drop-down list, select the type of monitored device
4.4 ShineMaster Datalogger managing
Device types parameter information :
INVERTER : GROWATT Inverter;
Devices should be added in ‘ShineMaster datalogger setting’ interface in internal page
SDM120 : single phase meter;
prior to monitoring
SDM630 : three phase meter;
BatterBox : battery Box;
Surveymeter : Survey Meter.

12 13
 (4) Select "Add" and click Save.

(5) After successfully saving, enter the "Device Status" page to confirm whether the
device is added successfully.

(3) In the third drop-down list, fill in the communication address of monitored device 4 .4.2 Remove device

(1) Select the monitoring method for monitoring PV devices in the first drop-down list of
"Add or Remove Devices".
(2) In the second drop-down list, select the type of PV plant being monitored.
(3) Fill in the PV device communication address in the third drop-down list.
(4) Select "Del" and click Save to finish removing of the device.
(5) After successfully saving, enter the "Device Status" page to confirm whether the
device is successfully deleted.
As shown in the picture:

14 15
Add and delete device: (1) ShineMaster’s Default setting of the DHCP function is “ON” it will automatically get IP
1. When you need delete a device, all the options should be the same with the momemet address.ShineMaster
you add this device like: 485 channel, device type, address, if you are not sure about this
you can check the device status first.
2. When one address is occupied, you cannot just paste the new device, you have to delete
the old device and use this address.

4 .5 Baud Rate Setting

(2) If you need a fixed IP address you need following steps
The Default two channels’ Baud Rate are both 9600, you can adjust the Baud Rate for (2.1) Turn off the “Dynamic IP” to shut down the DHCP function
different scenarios. (2.2) Put in the fixed IP, network management, net mask and DNS then click “Save”
(1) Choose the Baud rate at the “Baud rate setting ”Bar.
(2) Choose the corresponding chanels RS485_1 or RS485_2.
Set the Baud rate to 9600 as RS485_1

4.6.2 Server Address Setting

4.6 Server Address and Shine Master IP setting
The Server Address will choose two methods, one is IP and one is domain name, you can
only use one at a time.
4.6.1 Data logger IP Setting (1) When you are using Server IP to connect the server please turn off the “domain name
analysis function”, set the server as 120.77.127.135.

16 17
 5 Server: Shineserver’s operation

If needed to the datalogger and all monitoring devices for data display, monitoring, and
set up parameters by the server, you need to first add datalogger to the server, when
Shinemaster added to the server, if the subsequent need to modify some parameters of
The datalogger or enable, disable a function can be done through the server.

5.1Registration and login

(2) when you are using the domain name to connect server you can choose on at
“Domain Name Analysis Function” set the server as server-cn.growatt.com

(1) Enter the address of the server on the computer browser to enter the ShineServer
login page. If you are logging in for the first time, register the user name first. Enter the
domain name access page, as shown in Figure 5-1.

The Chinese user server domain name is: http://server-cn.growatt.com

The overseas user server domain name is: http://server.growatt.com

Server port name and data upgrade interval are fixed cannot be changed

Caustion:
1）If you add a device, after saving there is no refreshment, please disconnect the data
logger and restart it.

18 19
 Figure 5-1 Shine Server login page Fig 5-2

5 .2 View monitoring data

(2) Register the user name and input the user information according to the pop-up. After
the information is completed, click “Register”. (1) After the registration is completed, it will automatically jump to the ShineServer main
Note: “ShineMaster serial number” and “datalogger check code” seen on the package interface. Click "plant" → "plant data" , and the displayed information is the total power
box. chart of the plant on the day. The drop-down list “Select collector” can be used to view
the daily power chart of a single inverter in the power station.

20 21
 5.3.1 Add or Delete Monitoring device

(1) In the Server page click the “Device Management” and then click “Data Logger”.
In this page click set the device updating icon.

(2) Add one device, add one Growatt inverter set the 485 communication address is 1.

Fig 5-3

(2) Click "plant" → "Device list" to see real-time data monitored by datalogger,
"Inverter", "Weather station", "Smart Meter", and "Combined Box" "MAX" .

5 .3 Add or Delete Monitoring devices, change the ShineMaster

Baud rate

22 23
(3) Delete one device, just like following figure. (1) In the Server page click “Device Management” then click “Data Logger”, click the
Baud rate setting icon.

(2) Set chosen channel’s baud rate.

(4) Above adding or deleting devices if success following figure will pop out.

(3) If success following figure will pop out.

5 .3.2 Change ShineMaster Baud rate.

Note: The second channel of Baud rate setting would be the same as the fist channel.

24 25
6 Device Maintenance
6.3 Maintenance

6.1 Reset ShineMaster 1. Avoid frequent switching of power supply, gently handle, to prevent damage;
2. ShineMaster is a product for indoor use. Do not place ShineMaster in a humid
If you press the “reset” button for five seconds, it will erase all the registered device
environment or in direct sunlight.
information. All the information for the server communication part will be kept.

6.2 Common faults and troubleshooting

7 Technical specifications
Fault Cause Suggestion

Cannot enter the 1.Enable Router DHCP Function

ShineMaster can not
ShineMaster 2.PC and the ShineMaster must be in
internal page
obtain the IP
the same domain.
7.1 ShineMaster specification

1.Check whether the router network is

ShineMaster
connected to the Internet.
built-in page General specification
2.Check if the "server address" is correct
"System Status Unable to connect to
The Chinese user server domain name is:
Information" server
http://server-cn.growatt.com
shows not
The overseas user server domain name is: Length * width * height 130mm*84mm*25mm
connected
http://server.growatt.com
Net Weight 180±g
1.Check the communication line is in
1.Monitor connection
contact with the stability
failed Protection grade IP30
2.Enter the built-in page "datalogger
2.No access to the
settings" to add photovoltaic devices
ShineMaster is built-in page to
3.On the "Device Status" page of the
online, but the add equipment
built-in page, check whether the
monitored device 3.Inconsistent
device's communication address is
is disconnected Photovoltaic
consistent with the added device. Operating environment
after logging in to equipment address
4.Check whether the serial number of
the account and added
the monitored PV equipment is 10
equipment address
digits. It can only contain English
4.Illegal PV device
letters and numbers, and there are no Ambient temperature -40℃~ +60℃
serial number
illegal characters.

Long time no Installation Indoor

Configuration page
refresh interface Refresh the page or login in again.
does not respond
after operation

26 27
Communication

RS485 maximum stability monitoring 32

Wireline communication
inverters

Wirerless communication Not supported temporarily

500 meters maximum (twisted shielded

RS485 communication distance
cable)

8 Contact us
Growatt New Energy provides customers with a full range of technical support. Users can
contact the nearest Growatt new energy office or customer service point, or they can
contact the company's customer service center directly.

Name: SHENZHEN GROWATT NEW ENERGY TECHNOLOGY CO.,LTD

Address: No.28 Guangming Road, Shiyan Street, Bao’an District, Shenzhen, P.R.China

Customer Service Hotline: +86 755 27471942

E-mail:[email protected]

Company website: www.ginverter.com

28