Scribd
Upload
688 views

HSS Column Base Plate Design

This document provides details of the design of a base plate including: 1. Base plate size and bolt layout are defined. Moments of inertia and section moduli are calculated. 2. Design loads on the base plate are specified as axial forces and bending moments. 3. Column size supported by the base plate is given. Maximum tensions in the bolts are calculated. 4. Section moduli and maximum pressures in the base plate are calculated. Stiffeners are specified. Moments and shears for various edge and corner plates are determined. 5. The final bending moment to be resisted by the base plate is calculated. The required and provided section moduli are checked. Maximum

Uploaded by

jatin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
688 views

HSS Column Base Plate Design

This document provides details of the design of a base plate including: 1. Base plate size and bolt layout are defined. Moments of inertia and section moduli are calculated. 2. Design loads on the base plate are specified as axial forces and bending moments. 3. Column size supported by the base plate is given. Maximum tensions in the bolts are calculated. 4. Section moduli and maximum pressures in the base plate are calculated. Stiffeners are specified. Moments and shears for various edge and corner plates are determined. 5. The final bending moment to be resisted by the base plate is calculated. The required and provided section moduli are checked. Maximum

Uploaded by

jatin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 10

1 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:

A Basic Details Y

A.1 Base Plate Size

B= 1100 mm Z
D= 1100 mm
Thk = 50 mm
Number of Bolts per side = 8
Along Z Along Y
Distance of Bolt 1 from plate mid = 460 mm 460 mm
Distance of Bolt 2 from plate mid = 328.58 mm 328.58 mm
Distance of Bolt 3 from plate mid = 154 mm 154 mm
Distance of Bolt 4 from plate mid = 65.74 mm 65.74 mm
Distance of Bolt 5 from plate mid = 0 0 mm

Iyy = 3929610 mm4 Zyy = 8542.63 mm3


Izz = 3929610 mm4 Zzz = 8542.63 mm3

B Design Loads.

Sl Axial (kN) M-y (kN-m) M-z (kN-m)


1 990.556 28.944 -0.992
2 -265.85 -71.663 -41.879
3 198.44 755.174 30.538
4 195.926 -253.057 -31.015
5 250.804 91.736 109.596
6 250.559 -45.002 -131.801

C Column Size

B= 400 mm
D= 500 mm

D Calculations for Bolts

Max Tension in Bolt for case 1 = 31873 N COMPRESSION


Max Tension in Bolt for case 2 = -22786 N TENSION
Max Tension in Bolt for case 3 = -84888 N TENSION
Max Tension in Bolt for case 4 = -26256 N TENSION
Max Tension in Bolt for case 5 = -14611 N TENSION
2 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:

Max Tension in Bolt for case 6 = -11748 N TENSION

Area of Bolt Required = 707.40 mm2


Bolt Size Provided = 32 mm SAFE
88.00%
3 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:

E Calculation for Plate

Zyy = 221833333 mm3


Zzz = 221833333 mm3

Max Pressure in Plate for case 1 = 0.954 N/mm2


Max Pressure in Plate for case 2 = 0.292 N/mm2
Max Pressure in Plate for case 3 = 3.706 N/mm2
Max Pressure in Plate for case 4 = 1.442 N/mm2
Max Pressure in Plate for case 5 = 1.115 N/mm2
Max Pressure in Plate for case 6 = 1.004 N/mm2

Grade Of Concrete = 25 N/mm2 SAFE

Number of Stiffner Provided Along "Y" = 3


Number of Stiffner Provided Along "Z" = 2
Stiffner Plate Thickness = 16 mm

E.1 Edge Plate Along "Y"

Panel Size
Y = 350 mm
Z = 226 mm
Max Pressure = 1.115 N/mm2

Moment Along Column Face = 2373 N-mm/mm


Moment Along Stiffner Face = 5507 N-mm/mm
Shear Along Column Face = 63 N/mm
Shear Along Stiffner Face = 104 N/mm

E.2 Edge Plate Along "z"

Panel Size
Y = 368 mm
Z = 300 mm
Max Pressure = 3.706 N/mm2

Moment Along Column Face = 20911 N-mm/mm


Moment Along Stiffner Face = 37082 N-mm/mm
Shear Along Column Face = 341 N/mm
Shear Along Stiffner Face = 473 N/mm

E.3 Corner Plate


4 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:

Panel Size
Y = 350 mm
Z = 300 mm
Max Pressure = 3.706 N/mm2

Moment Along Stiffner Face1 = 55589 N-mm/mm


Moment Along Stiffner Face2 = 75662 N-mm/mm
Shear Along Column Face = 556 N/mm
Shear Along Stiffner Face = 649 N/mm

E.4 Corner Plate for Tension in Bolt

Max Tension in Corner Bolt = 84888 N


Tension in 2 nd Corner Bolt along Y = 23019 N
Tension in 2 nd Corner Bolt along Z = 6057 N

B.M Due to Corner Bolt = 38127 N-mm/mm


B.M Due to 2nd Corner Bolt along Y = 9465 N-mm/mm
B.M Due to 2nd Corner Bolt along Z = 2105 N-mm/mm

Final Moment in Plate due to this condition = 47592 N-mm/mm

F FINAL VALUES

Final Moment to be resisted by Base Plate = 75662 N-mm/mm

Critical Load
Z required by the Base Plate = 409 mm3
from DL+IL

Z Provided by the Base Plate = 417 mm3


SAFE

Maximum shear force = 649 N/mm


Allowable shear force = 5000 N/mm
SAFE
5 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:
6 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:
7 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:
8 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:
9 OF 10

LARSEN & TOUBRO LIMITED


ECC Division - EDRC

DOCUMENT NO DATE
PROJECT:

DESIGNED CHECKED SHEET


TITLE:
GN-ST-06(Design Sheet)
(i) Two formats of design sheets are enclosed. These sheets can be used as per the convenience.
(ii) The ‘designed’ and ‘checked’ columns of design sheet shall have the signature of the person
responsible for design & checking respectively.

You might also like