Scribd
Upload
46 views1 page

Data For Density Level Measurement

Experiment 1A measured the water level and temperature in Tank T1. The suggested water level was 550 mm. The actual water level readings from the sight glass and level indicator were 560 mm and 83.1-83.2% respectively. The temperature readings were 29-28°C. Experiment 1B measured the water level and temperature in Tanks T1 and T2. The suggested water level was 450 mm. The actual level readings for T1 were 430 mm from the sight glass and 64.5-64.6% from the indicator. The temperature was 29°C. The actual level readings for T2 were 435 mm from the sight glass and 56.8% from the indicator. The temperature was

Uploaded by

FBK98
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views1 page

Data For Density Level Measurement

Experiment 1A measured the water level and temperature in Tank T1. The suggested water level was 550 mm. The actual water level readings from the sight glass and level indicator were 560 mm and 83.1-83.2% respectively. The temperature readings were 29-28°C. Experiment 1B measured the water level and temperature in Tanks T1 and T2. The suggested water level was 450 mm. The actual level readings for T1 were 430 mm from the sight glass and 64.5-64.6% from the indicator. The temperature was 29°C. The actual level readings for T2 were 435 mm from the sight glass and 56.8% from the indicator. The temperature was

Uploaded by

FBK98
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Experiment 1A

Table 1A: Level measurement (ambient water) in Tank T1


Operation: Open Tank T1
Heater: Off

RUN Set 1 Set 2 Average

A Suggested Level, mm 550 550 550


B Actual Level (LG1), mm 560 560
C Actual Level (LIA1), % 83.10 83.20
Calculated Level, mm
D Temperature (TG1), °C 29 28
E Deviation = B-C, mm
F LT1, mmH2O 35.06 34.97
Remarks:
B: Read from the Sight Glass with millimetre scale (LG1)
C: Read from the Level Indicator (LIA1) at the front panel.
Actual Measured Level at T1, mm = Reading in LIA1, % x 705.6mm
D: Read from the Temperature Gauge (TG1) mounted at level tank T1.

Experiment 1B
Table 1B: Level measurement (ambient water) in Tank T1 & T2
Operation: Open Tank T1 & T2
Heater: Off

RUN Set 1 Set 2 Average


A Suggested Level, mm 450 450 450
B Actual Level (LG1), mm 430 430
C Actual Level (LIA1), % 64.5 64.6
Calculated Level, mm
D Temperature (TG1), °C 29 29
E Deviation = B-C, mm
F Actual Level (LG2), mm 435 435
G Actual Level (LI2), % 56.8 56.8
Calculated Level, mm
H Temperature (TG2), mm 28 28
I Deviation = F-G, mm
J Deviation = B-F
K Deviation = C-G
Remarks:
B: Read from the Sight Glass with millimeter scale (LG1)
C: Read from the Level Indicator (LIA1) at the front panel.
Actual Measured Level at T1, mm = Reading in LIA1, % x 705.6mm
D: Read from the Temperature Gauge (TG1) mounted at level tank T1.
F: Read from the millimeter scale (LG2).
G: Read from the Level Indicator (LI2) at the front panel
Actual Measured Level at T2, mm = Reading in LI2, % x 776mm
H: Read from the Temperature Gauge (TG2) mounted at level tank T2.

You might also like