FE E D AND B IOFU E L

BUCKET E LEVATOR
T YPE BE50-80-150-200-300-500-700
Bucket elevator
Type BE50-80-150-200-
300-500-700
ANDRITZ bucket elevators are designed for vertical conveying of grain,
granulates, pellets, and meal products. The bucket elevators are manu-
factured for industrial use in modern processing plants where a high de-
gree of automation requires solid and reliable construction. The BE series
bucket elevators are designed for high capacity – up to 270 m3/h at a
maximum height of 50 m and are also designed to be dustproof to meet
the requirements of a variety of feed and biofuel applications.

MODUL AR CONSTRUCTION STANDARD FEATURES

The design of the BE bucket elevator is based on stan- The elevator comes with one service hatch, a speed
dard, modular elevators, which consist of a bottom, guard and belt alignment sensor with an oil resistan-
head and pipe section. The sections are connected ce belt. Pipe sections are available in lengths ranging
with bolted flanges for easy mounting. The structure of from 0,3 – 2,0. There are options for steel or non-me-
the elevator is self-supporting up to 30 m but may re- tallic buckets.
quire lateral support.

TECHNICAL SPECIFICATIONS
Type Capacity Bucket type Bucket Belt width Motor Max. height
m3/h per meter mm kW at max.

BE50 15 / 20 / 25 / 30 / 35 S100-90 HDP-MD 6 / 8 / 10 / 12 / 14 120 1.1 – 5.5 50

BE80 35 / 40 / 44 / 49 / 54 S130-120 HDP-MD 7 / 8 / 9 / 10 / 11 150 1.1 – 7.5 50

BE150 55 / 64 / 73 / 83 / 92 S180-140 HDP-MD 6 / 7 / 8 / 9 / 10 200 1.5 – 15 50

BE200 88 / 106 / 123 / 141 S230-170 HDP-MD 5/6/7/8 250 2.2 – 18.5 50

BE300 106 / 127 / 148 / 169 S280-170 HDP-MD 5/6/7/8 300 3.0 – 22 50

BE500 159 / 191 / 223 S350-180 HDP 5/6/7 370 4.0 – 30 50

BE700 178 / 222 / 267 S370-215 HDP 4/5/6 400 5.5 – 37 50

ST - Standard bottom, SC - Self cleaning bottom.

Capacities in m3 for grain.
Specified capacities are calculated based on a belt speed of 2.45 m/s.
Filling level of bucket is stated to be between 75% and 80%.
The data provided refers to a filling level of 80%.

2
 1 2 3 4 5 6 7 8 9 10 11 12 1
1 2 3 4 5 6 7 8 9 10 11 12

SHAFT-MOUNTED GE ARED MOTORS A

A
Front head cover Back head cover Depend on motor size
The bucket elevator is available with Front head cover Back head cover Depend on motor size
A
A C
shaft-mounted bevel or helical geared
_
B Head section _ C
B
B B Head section
37
motors requiring a minimum of main- 37

tenance. The gear motors can be moun-

MM
C

ted either on the left or on the right, C

33
H

GG
H
again securing a high degree of flexi­ Outlet section 15

44
GG
Outlet section 15
bility. D

°°
D
Z

15
Z

15
Z
XZ X Spacer angle
X X

22
Spacer angle

GG
SURFACE TRE ATMENT

linie
centerlinie
E
E

RAL1013, galvanized or stainless steel.

Z Zcenter
Pipe section X cente
Pipe section X cent
with hatch
ACCESSORIES PROGRAM F
F with hatch

11
GG
In addition, an extensive accessories
program is available, comprising: G
J
J Inlet section
Inlet section
G
Y Y
• Misalignment control Y Y

• Speed guard
45°/55°/60°
KK

• Dust extraction 45°/55°/60°

--
H
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
GG

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

• Explosion relief min. 100

A
min.
Section Z-Z100 A
A Section Z-Z A
Front head cover Back head cover Depend on motor size
• Inlet regulating A
Front head cover Back head cover Depend on motor size J
M2
Bottom section
2 M2
A
J
43 Ø1
Bottom section 2
C _
43 Ø1
B
• Spot filter, type DFAK B Head section B
Head section B
_ C B
B
37
Support 37
200

I F
200

Y
Y I Support F
M

K
L E D

M
K
C Z X L C E D
C Z X C
G3

H
G3

H Y center linie Y center linie

Y center linie Y center linie

15
Outlet section 15 n x P2

15
G4

Outlet section13 15 n x P2
G4

L
3 4 5 6 7 8 9 10 11 12 14 15 16
D L D
15°

Z D
Section Y-Y
D
15°

Z
be held liable
to others without
The reproduction, distribution and utilization of this document

Section Z-Z Section Y-Y

event
event16016)

Z J A
liable
without
of this document

in the

of the grant of a patent, utility model or design. (ISO 16016)

in the (ISO
will be held

Z J
to otherswill

X X
All rights reserved

ont head cover

or design.

Depend on motor size

Offenders

Back head cover X Spacer angle

of its contents
G2

X M2
reserved

G1 isangle
available in following length=2000/1500 (mm)
damages.Offenders
its contents
and utilization

Spacer M1
rightsmodel
authorization isofprohibited.
G2

A G1 is available in following length=2000/1500

2 (mm) 2
communication

of a patent,Allutility

M1
Z center linie

Ø1 (mm)
the paymentisofprohibited.

G2 is available43 Ø1
in following length=2000/1500/1000/500/250 2
as the communication
distribution

K
of damages.

Z center linie

CK Ø1
E E
G2 is available in following length=2000/1500/1000/500/250 (mm)
expressforauthorization

_
as well as the

B
the grant

E E
The reproduction,

Head section
payment
as wellexpress

B
for the of

1 2 3 4 5 6 43
7 8 9 10 11 12 1
1 2 37 3 4 5 6 7 8 9 43 10 11 12
nxP

Pipe section X center linie

nxP
M

Pipe section X center linie

M

with hatch

M
F F
F with hatch F
G1

C
G1

H
15
15

15
G Outlet section Inlet section J 15 n x P2 n x P1 15 G
G Y Y Inlet section n x P1 15 G
Y Y D
15°

Z Section Y-Y
Z J Section X-X
X X Spacer angle Section X-X
45°/55°/60° M1 Q(1:1)
Q(1:1)
K

H H
V
-

45°/55°/60° 2
Z center linie

Ø1
K

H H
V
-

E
V1 V1
G

min. 100 V1 V1
G

min. 100 43
Q
Q
nxP

J Pipe section Bottom section X center linie J

U
M

Bottom section
J J
with hatch
U

V2
200

Y I Support F Dimensions in mm
V2
200

Y I Support F
15

K K
JK Inlet sectionL E D K
Z X L n x P1 E
15 D G over 0,4 6 30 120
Tolerances for linear dimensions (except chamfers)
400 1000 2000 4000 8000 12000 16000
tolerances

ISO 2768-mK-E

Y Y
General

X
0,1 0,2 0,3 0,5 0,8 1,2 2 3 4 5 6

Z
(Machining) up to 6 30 120 400 1000 2000 4000 8000 12000 16000 20000 Tolerances for linear dimensions (except chamfers)
over 0 over over 0,4 6 30 120 400 1000 2000 4000 8000 12000 16000
tolerances

ISO 13920-BA-F (Steel fabric.) 30 120 400 1000 2000 4000 8000 12000
ISO 2768-mK-E16000
General

1 2 2 3 4 4 5 6 7 8 9 0,1 0,2 0,3 0,5 0,8 1,2 2 3 4 5 6

2000 B, >2000 A up to 30 120 400 1000 2000 4000 8000 12000 (Machining)
16000 20000 20000 up to 6 30 120 400 1000 2000 4000 8000 12000 16000 20000

Y center linie Y center linie

SAP Material / Item name AMC Basic Material Name Net Weight
Basic Material Standard ISO 13920-BA-F (Steel fabric.) over 0 30 120 400 1000 2000 4000 8000 12000 16000 over
2000 B, >2000 A N/A
1 2 2 3 4 4 5 6 7 8 9
up to 30 120 400 1000 2000 4000 8000 12000 16000 20000 20000
Product Type Product Code

Y center linie Y center linie

SAP Material / Item name AMC Basic Material Name Basic Material Standard Net Weight
N/A

Section X-X
Initial Revison Actual Revision Product Type Product Code
Drawn Replacement for Drawing No Rev
Initial Revison Actual Revision
Checked
L L

DIMENSION SKETCH
Drawn
Copy from Drawing No Rev Replacement for Drawing No Rev

Q(1:1)
- Checked -
L L
45°/55°/60°
Old Drawing No Rev Copy from Drawing No Rev
K

Revision
H - -
V
-
express authorization is prohibited. Offenders will be held liable

Description Drawing No Rev Old Drawing No Rev

as well as the communication of its contents to others without
The reproduction, distribution and utilization of this document

for the payment of damages. All rights reserved in the event

of the grant of a patent, utility model or design. (ISO 16016)

Revision
express authorization is prohibited. Offenders will be held liable

Description Drawing No Rev

as well as the communication of its contents to others without
The reproduction, distribution and utilization of this document

for the payment of damages. All rights reserved in the event

of the grant of a patent, utility model or design. (ISO 16016)

Size Sheet/Sheets Scale

V1 V1 1 /1
G1 is availablemin. 100
in following length=2000/1500 (mm)
Size Sheet/Sheets Scale

1 /1

G2 is available G1 is available in following length=2000/1500

in following length=2000/1500/1000/500/250 (mm) (mm)
A B CG2 is available
D E following
F length=2000/1500/1000/500/250
G (ST/SC) G1 G2 G3 G4 H I J K L U V V1 V2
K K
K
in (mm) Q K
Ver.: 2.0

Bottom section2 5
J
1 2 3 4 6 7 8 9 10 11 12 13 14 15 16
U

Ver.: 2.0

Drawing sheet ISO 5457:1999 - A1

1 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Drawing sheet ISO 5457:1999 - A1

BE50 1008 330 305 151 180 252 700/850 957 V2494 61 592 469 402 580 169 574 159 145
I Support F
K
L E D
BE80 1170 411 392 185 211 286 800/950 1157 610 61 694 547 436 742 204 740 200 540
Tolerances for linear dimensions (except chamfers)
over 0,4 6 30 120 400 1000 2000 4000 8000 12000 16000
tolerances

ISO 2768-mK-E
General

0,1 0,2 0,3 0,5 0,8 1,2 2 3 4 5 6

(Machining) up to 6 30 120 400 1000 2000 4000 8000 12000 16000 20000
ISO 13920-BA-F (Steel fabric.) over 0 30 120 400 1000 2000 4000 8000 12000 16000 over
1 2 2 3 4 4 5 6 7 8 9
2000 B, >2000 A up to 30 120 400 1000 2000 4000 8000 12000 16000 20000 20000

Y center linie Y center linie

SAP Material / Item name AMC Basic Material Name Basic Material Standard Net Weight
N/A
Product Type Product Code

Initial Revison Actual Revision

Drawn Replacement for Drawing No Rev
2000/1500

150 - 2000

BE150 1485 493 425 217 244 351 1000/1150 1350 725 62 804 644 550 906 269 905 225 679
Checked
Copy from Drawing No Rev L
- -
Old Drawing No Rev
Revision
Description Drawing No Rev

Size Sheet/Sheets Scale

1 /1
ailable in following length=2000/1500 (mm)
ailable in following BE200 1715 583 (mm)
length=2000/1500/1000/500/250 452 245 272 406 1260/1400 1588 855 62 1013 K 830 717 1086 324 1085 270 814
Ver.: 2.0

3 4 5 6 7 8 9 10 11 12 13 14 15 16
Drawing sheet ISO 5457:1999 - A1

BE300 1790 583 477 270 297 456 1260/1400 1628 889 63 1013 830 717 1086 374 1085 270 814

BE500 2042 659 562 333 364 586 1400/1500 1838 970 90 1139 901 661 1232 504 1236 328 908

BE700 2325 713 669 346 373 612 1400/1500 2020 1083 85 1298 1009 748 1340 530 1344 354 990

3
GLOBAL SUPPLIER – LOCAL PRESENCE

With sales, service, engineering, manufacturing and production sites located

all around the world, ANDRITZ Feed and Biofuel is truly a global organization
with a local presence. ANDRITZ is vital to ensuring a reliable global supply
of aqua feed, animal feed, pet food, and biofuel. With full process lines
accounting for half the world’s production of aqua feed and biomass alone,
we continuously support leading producers in achieving the highest levels in
safety, quality, and control from feedstock to final product.

How can we help grow your business?

ANDRITZ Feed and Biofuel A/S

Glentevej 5–7
6705 Esbjerg, Denmark
p: +45 72 160 300
[email protected]

AUSTRALIA COLOMBIA ITALY TURKEY

p: +61 3 8773 4888 p: +57 (1) 744 8200 p: +39 (0445) 575 695 p: +90 232 570 38 00
[email protected] [email protected] [email protected] [email protected]

BANGL ADESH DUBAI MEXICO UK

p: +88 (02) 9844800 p: +971 4 299 5555 p: +52 443 323 1530 ext 364 p: +44 1482 825119
[email protected] [email protected] [email protected] [email protected]

BRAZIL FRANCE NETHERL ANDS USA

p: +55 47 3387 9146 p: +33 24 75 06 364 p: +31 40 2627777 p: +1 570 546 1253
[email protected] [email protected] [email protected] [email protected]

CHILE GERMANY POL AND VIETNAM

p: +56 2 24624608 p: +49 2104 9197 0 p: +48 60 906 1037 p: +84 8 6253 9434
[email protected] [email protected] [email protected] [email protected]

CHINA INDIA SOUTH AFRICA

p: +86 21 5774 5781 p: +91 87544 15287 p: +27 82 781 0808
[email protected] [email protected] [email protected]

ANDRITZ.COM/FT

All data, information, statements, photographs and graphic illustrations in this leaflet are without any obligation and raise no liabilities to or
form part of any sales contracts of ANDRITZ AG or any affiliates for equipment and/or systems referred to herein. © ANDRITZ AG 2018. All rights
reserved. No part of this copyrighted work may be reproduced, modified or distributed in any form or by any means, or stored in any database
or retrieval system, without the prior written permission of ANDRITZ AG or its affiliates. Any such unauthorized use for any purpose is a violation
B 0618

of the relevant copyright laws. ANDRITZ AG, Stattegger Strasse 18, 8045 Graz, Austria.
1186 GB