ASK A 3M EXPERT
June, 2019
3M™ Aluminum Foil Tape 425
Product Description
3M™ Aluminum Foil Tape 425 combines a 3 mil nominal dead soft
aluminum foil backing with a transparent acrylic adhesive.
Product Features
• Flame resistant. Meets U.L. 746C (File E 122798) and 723, Class “L” low
ammability rating (File R 7311).
• 3M aluminum foil tape 425 can be certi ed to meet L-T-80C.
• Meets requirements of FAR 25.853(a).
• The very low moisture vapor transmission rate makes these tapes a good
sealant.
• The acrylic adhesive, combined with the durable aluminum backing, o ers
ideal properties for long serviceable life in and outdoors.
• Good candidate as a maskant in electroplating of aluminum because it will
not contaminate the bath.
• Aluminum backing provides excellent re ection of both heat and light.
• Best results obtained when applied to a clean, dry surface above 32°F
(0°C).
IMPORTANT: These tapes are not intended for medical usage. Neither 3M
nor the Food and Drug Administration have evaluated or reviewed this tape
for medical application. 3M does not recommend or endorse the usage of
the aluminum tape for medical application. User assumes all risk and liability
whatsoever in connection with usage of product in a medical application.
3M™ Aluminum Foil Tape 425
Technical Information Note
The following technical information and data should be considered representative or typical only and should not be
used for speci cation purposes.
Typical Physical Properties
Property Values Method
Color Shiny silver
Total Tape Thickness 0.12 mm 4.6 mil ASTM D3652
Backing Thickness 0.07 mm 2.8 mil ASTM D3652
Backing Dead soft aluminum
Adhesive Acrylic
Approximate Weight 5.54 g/m/24 mm 0.012 lb/yd/in
Water Vapor 0.77 g/m²/24 hr 0.05 g/100 in²/24 hr ASTM D3833
Transmission
Typical Performance Characteristics
Dwell/Cure
Property Values Method Time Substrate Notes
180° 5.1 N/cm 47 oz/in ASTM Initial Stainless 12 in/min (300 mm/min)
Peel D3330 Steel
Adhesion
Tensile 49 N/cm 28 lb/in ASTM
Strength D3759
Elongation 6 % ASTM
at D3759
Break
Table continued on next page
3M™ Aluminum Foil Tape 425
Typical Performance Characteristics (continued)
Dwell/Cure
Property Values Method Time Substrate Notes
Temperature
-54 to 149 -65 to
Use °C 300 °F
Range
Available Sizes
Property Values
Standard Roll Length 55 m 60 yd
Handling/Application Information
Application Ideas
• Aircraft paint stripping maskant.
• Moisture barrier in “white goods” appliances.
• General purpose heat re ector and heat dissipater.
• Mechanically hold wires and cooling coils in “white goods” appliances.
• Repair tears on truck trailers and aircraft.
• Splicing of thin gauge foils.
• General purpose holding, patching, sealing applications – indoors and out.
Storage and Shelf Life
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in the original carton.
To obtain best performance, use this product within 24 months from date of manufacture.
Industry Speci cations
UL 746C (File E 122798)
UL 723 Class “L” low ammability rating (File R 7311)
Can be certi ed to meet L-T-80C
FAR 25.853(a)
Trademarks
3M is a trademark of 3M Company.
3M™ Aluminum Foil Tape 425
References
Property Values
3m.com Product Page http://www.3m.com/3M/en_US/company-us/all-3m-
products/~/3M-Aluminum-Foil-Tape-425?
N=5002385+3293241744&rt=rud
Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-
search/results/?
gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=425
ISO Statement
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to
ISO 9001 standards.
Technical Information
The technical information, guidance, and other statements contained in this document or otherwise provided by 3M
are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and
representative nature of such information is not guaranteed. Such information is intended for people with
knowledge and technical skills su cient to assess and apply their own informed judgment to the information. No
license under any 3M or third party intellectual property rights is granted or implied with this information.
Product Selection and Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can a ect the use and
performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating
the product and determining whether it is appropriate and suitable for customer’s application, including conducting
a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.).
Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable
safety regulations, may result in injury, sickness, death, and/or harm to property.
3M™ Aluminum Foil Tape 425
Warranty, Limited Remedy, and Disclaimer
Unless a di erent warranty is speci cally stated on the applicable 3M product packaging or product literature (in
which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product
speci cation at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING,
CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive
remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability
Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any
loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or
consequential (including, but not limited to, lost pro ts or business opportunity), regardless of the legal or equitable
theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.
3M United States Please recycle. The brands listed above are trademarks of 3M
3M Center © 3M 2020. All Rights Reserved.
St. Paul, MN 55144-1000
800-362-3550
www.3M.com
