Conformity The heavy duty Protective

Stop Control Belt Misalignment Switch, is

made for applications requiring a unit which
caters for high speed belt applications, having
a cam driven drift alarm micro switch with
direct opening action and direct opening action
Conveyor Belt trip micro switch. The cams are individually
adjustable for finer alarm and trip points.
Misalignment The switch may be ordered in either the
standard right handed shaft operation or left
Switch handed shaft. It’s unique dual direction sprung
cam operator system coupled with the IP66/67
high speed roller ensures long, trouble free
operation, in the most severe environmental
Illustration only, actual product may differ. situations.
Photograph displays vertical
roller arm fitted.
Order as separate item. FEATURES
Switch Unit:
• Robust UV stable, flame retardant (V0
rating) PBT/PC non corrosive plastic
enclosure to IP 66/67.
• All external fixings etc. are 316 Stainless
Steel.
• Operating shaft bearings are UV stable,
flame retardant, 30% Mineral Filled Nylon
66 for long maintenance free operation.
• Operating shaft sealing via a double lip oil
seal, with external dust protecting boot.
• 90° full movement of operating arm with
easily adjustable switching points from 5°
to 75°.
• Standard unit has both ALARM & TRIP
S.P.D.T Change-over Safety Micro Switches
with Direct Opening Action (IEC 60947-5-
1 Annex K) in contact element form C
tested and passed too IEC 60947-5-1.
• Micro switches pre wired to terminals.
Roller Arms: (NOTE: Ordered separately)
• Solid or sprung shaft roller mounting arms,
available either vertical or horizontal.
• Rollers are IP66/67 316 Polished Stain-
less Steel and available in either 50mm
diameter or 25m diameter with high speed
sealed bearings.
Made in Western Australia
Made in Western Australia
• Arms are fully adjustable through 360°.

BELT MISALIGNMENT SWITCH

 DIMENSIONS
Standard Switch STD-P
105mm
Adjustable Switching Cams

6
ø
45.8mm

Right
Handed
162.5mm

Shaft
Operation
214mm

Alarm
Switch Trip
Switch

Standard
Tunnel
128mm Terminals

M20 Conduit
80mm

Entries
31mm

20mm 5mm ø
Earth Stud

ENCLOSURE SPECIFICATIONS
IP67, UV stable, high impact, chemical resistance, flame retardant (V0) PBT/PC material.

ORDERING DETAILS SAFETY MICRO SWITCHES WITH

DIRECT OPENING ACTION
NOTE: Order Switch Unit and Roller Arm
Safety Micro Switch with Direct Opening Action Specifications
Standard Switch ................................................................................ STD-P
IEC 60947-5-1 Annex K classification ■ Type 1 X Type 2 Direct Opening
■
Dual Switching ........................................................................... STD-P-D Change-over contact element X C
■ ■ Za ■ Zb
Contact material Ag-Ni
Standard Switch w/- spec Terminals .................... STD-P-K Utilization category AC-15 DC-13
Dual Switching w/- spec Terminals ............... STD-P-D-K Operational voltage 230 V 24 V
Operational current 1,5 A 1,5 A
Horizontal Roller Arm ........................................................ STD-HA Frequency 50/60 Hz ——
Number of electrical cycles 6050 (6 min-1)
Horizontal Sprung Roller Arm ........................... STD-HASR Number of mechanical cycles 6050 (6 min-1)
Conventional free air thermal current 10 A
Vertical Roller Arm .................................................................. STD-VA Conventional enclosed thermal current ——
Vertical Sprung Roller Arm .................................... STD-VASR Specifications (short-circuit with standability)
Rated conditional short-circuit current 3 00 A 1 000 A
Other variations available: Contact your distributor Short circuit protective device Fuse 6 A gG (IEC 60269-2) Fuse 6 A gR (IEC 60269-4)
DEL: CB002 04/18

Manufactured in Sold by:

Australia by:

18 Tambrey Way, Malaga

Western Australia 6090
PUB. No. STD

Telephone: (08) 9247 6700

Facsimile: (08) 9248 6292 www.safe-t-products.com.au

BELT MISALIGNMENT SWITCH