0% found this document useful (0 votes)
151 views4 pages

Datasheet: S10.X Linear LED Strip Light

Uploaded by

Lelawani Ismail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
151 views4 pages

Datasheet: S10.X Linear LED Strip Light

Uploaded by

Lelawani Ismail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

S10.

X Linear LED strip light


Datasheet

Product codes

Unit: Series: Colour temp. (K): Beam angle (°): Colour:


S10.X.1.0m LN 3K DF180 W (White)
S10.X.5.0m 4K

Optional Alumium Extrusion:


COM-S10.X-MOUNTCLIP-1000m

Photometrics

CCT: 3000K CCT: 4000K


Efficacy: 41lm/W Efficacy: 43lm/W
Lumen outpuT: 410lm/m Lumen output: 425lm/m

0 90˚
40
80˚
CANDELA VALUE

60
70˚
70
60˚
90

110 50˚
130
0˚ 10˚ 20˚ 30˚ 40˚
VERTICAL ANGLE

Beam angle: DF180°

Dimensions (mm)

Front view LED Strip Side view LED Strip

13
16.9

11

12.7
19
1000
5000

© 2018 Brightgreen™ Phone (+61) 1300 672 499 Email: [email protected] Web: brightgreen.com
Electrical

Length 1m 5m
Power
Usage CCT

10W/m 3K 410lm 2050lm

10W/m 4K 425lm 2125m

LED input voltage: Power usage: IP rating:


24V 10 IP67

Operational

Operating temp.: Average temp.: Lifetime: Warranty:


-20 to 50ºC 60ºC 50,000hrs 7 years of luminaire warranty
& 5 years of driver warranty

Compatibility

Drivers: Dimmable: Driver input voltage: Surge protection: Driver power factor:
BG-030SD Yes 180-265V 3100V >0.9
BG-080SD
BG-150SD

*For more details please refer to:


https://brightgreen.com/digital-driver
All systems are unique, please
call 1300 672 499 for advice on your installation.

Installation

Step 1 Step 2
Attach the provided mounting clips to the top of Fasten the luminaire to the wall using the
the cavity with the provided screws provided screws.

© 2018 Brightgreen™ Phone (+61) 1300 672 499 Email: [email protected] Web: brightgreen.com
Installation

Step 3
Wire the strip into the driver using the terminal
block. Plug the driver into a mounted general
power outlet (GPO) in the ceiling.

Optional

100

Fold the strip, the minimum bending diameter


is 100mm.

Step 1 Step 2
Cut the appropriate place Apply glue to the section uniformly after
(Max distance between cuts is 50mm). cutting.

© 2018 Brightgreen™ Phone (+61) 1300 672 499 Email: [email protected] Web: brightgreen.com
Optional

Step 3 Step 4
Insert the section into the plug according Dry the join with a heat gun or hair dryer
to direction of arrow. until the plug and the section are firm.

© 2018 Brightgreen™ Phone (+61) 1300 672 499 Email: [email protected] Web: brightgreen.com

You might also like