5/21/2018 ISO 15667 - slide pdf.c om

INTERNATIONAL ISO
STANDARD 15667

First edition
2000-05-01

Acoustics — Guidelines for noise control

by enclosures and cabins
 .
  e
  n
   i
   l Acoustique — Lignes directrices pour la réduction du bruit au moyen 
  n
  o
  n d'encoffrements et de cabines 
  o
   i
  s
  r
  e
  v
   l
   l
  u
   f
  e
   h
   t
  s
  s
  e
  c
  c
   A
 .
  e
   l
  p
  m
  a
  s
  e
  g
  a
  p
   6
  e
  e
  r
   f
  a
  s
   i
  s
   i
   h
   T

Reference number
ISO 15667:2000(E)

 ©  ISO 2000

http://slide pdf.c om/re a de r/full/iso-15667 1/7

www.standards.com.au   Copyright ISO   www.isostandards.com.au
 

5/21/2018 ISO 15667 - slide pdf.c om

ISO 15667:2000(E)

PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

 .
  e
  n
   i
   l
  n
  o
  n
  o
   i
  s
  r
  e
  v
   l
   l
  u
   f
  e
   h
   t
  s
  s
  e
  c
  c
   A
 .
  e
   l
  p
  m
  a
  s
  e
  g
  a
  p
   6
  e
  e
  r
   f
  a
  s
   i
  s
   i
   h
   T

 © ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
 

Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [email protected]
Web www.iso.ch
Printed in Switzerland

ii   © ISO 2000 – All rights reserved

http://slide pdf.c om/re a de r/full/iso-15667 2/7
www.standards.com.au   Copyright ISO   www.isostandards.com.au
 

5/21/2018 ISO 15667 - slide pdf.c om

ISO 15667:2000(E)

Contents   Page

Foreword.....................................................................................................................................................................iv
Introduction .................................................................................................................................................................v
1 Scope ..............................................................................................................................................................1
2 Normative references ....................................................................................................................................1
3 Terms and definitions ...................................................................................................................................2
4 General principles and operational considerations...................................................................................4
4.1 Sound source.................................................................................................................................................4

4.2 Sound propagation paths .............................................................................................................................4

 . 4.3 Efficient noise control ...................................................................................................................................6
  e
  n
   i
   l
  n
  o
5 Types of enclosures and cabins and particular requirements .................................................................8
  n
  o
   i 5.1 Enclosures......................................................................................................................................................8
  s
  r
  e
  v 5.2 Cabins...........................................................................................................................................................13
   l
   l
  u
   f
  e
   h
6 Acoustic requirements, planning and verification of noise control.......................................................13
   t
  s
  s 6.1 Target data....................................................................................................................................................13
  e
  c
  c
   A 6.2 Planning........................................................................................................................................................14
 .
  e
   l
  p
  m 6.3 Measurements..............................................................................................................................................16
  a
  s
  e 7 Information on enclosures..........................................................................................................................18
  g
  a
  p
   6 7.1 Information to be provided by the user .....................................................................................................18
  e
  e
  r
   f 7.2 Information to be provided by the manufacturer .....................................................................................19
  a
  s
   i Annex A (informative) Examples of construction ..................................................................................................20
  s
   i
   h
   T Annex B (informative)   Case studies........................................................................................................................38
Bibliography ..............................................................................................................................................................49

 © ISO 2000 – All rights reserved   iii

http://slide pdf.c om/re a de r/full/iso-15667 3/7
www.standards.com.au   Copyright ISO   www.isostandards.com.au
 

5/21/2018 ISO 15667 - slide pdf.c om

ISO 15667:2000(E)

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.

Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
 .
  e
  n
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
   i
   l
  n
  o
  n
  o
International Standard ISO 15667 was prepared by Technical Committee ISO/TC 43,   Acoustics , Subcommittee
   i
  s
  r SC 1, Noise .
  e
  v
   l
   l
  u
   f Annexes A and B of this International Standard are for information only.
  e
   h
   t
  s
  s
  e
  c
  c
   A
 .
  e
   l
  p
  m
  a
  s
  e
  g
  a
  p
   6
  e
  e
  r
   f
  a
  s
   i
  s
   i
   h
   T

iv   © ISO 2000 – All rights reserved

http://slide pdf.c om/re a de r/full/iso-15667 4/7
www.standards.com.au   Copyright ISO   www.isostandards.com.au
 

5/21/2018 ISO 15667 - slide pdf.c om

ISO 15667:2000(E)

Introduction

Acoustic enclosures and cabins provide a reduction of airborne sound on the propagation path from the machine
(or a set of machines) to nearby work stations or to the environment. This International Standard describes criteria
which determine the acoustic performance of enclosures and cabins with consideration of operational aspects.

 .
  e
  n
   i
   l
  n
  o
  n
  o
   i
  s
  r
  e
  v
   l
   l
  u
   f
  e
   h
   t
  s
  s
  e
  c
  c
   A
 .
  e
   l
  p
  m
  a
  s
  e
  g
  a
  p
   6
  e
  e
  r
   f
  a
  s
   i
  s
   i
   h
   T

 © ISO 2000 – All rights reserved   v

http://slide pdf.c om/re a de r/full/iso-15667 5/7
www.standards.com.au   Copyright ISO   www.isostandards.com.au
 

5/21/2018 ISO 15667 - slide pdf.c om

 .
  e
  n
   i
   l
  n
  o
  n
  o
   i
  s
  r
  e
  v
   l
   l
  u
   f
  e
   h
   t
  s
  s
  e
  c
  c
   A
 .
  e
   l
  p
  m
  a
  s
  e
  g
  a
  p
   6
  e
  e
  r
   f
  a
  s
   i
  s
   i
   h
   T

http://slide pdf.c om/re a de r/full/iso-15667 6/7

www.standards.com.au   Copyright ISO   www.isostandards.com.au
 

5/21/2018 ISO 15667 - slide pdf.c om

This is a free preview. Purchase the entire publication at the link below:

ISO 15667:2000 Acoustics - Guidelines for noise

control by enclosures and cabins

 .
  e
  n
   i
   l
  n
  o
  n
  o
   i
  s
  r
  e
  v
   l
   l
  u
   f
  e
   h
   t
  s
  s
  e
  c
  c
   A
 .
  e
   l
  p
  m
  a
  s
  e
Looking for additional Standards? Visit SAI Global Infostore
  g
  a
  p Subscribe to our  Free Newsletters about Australian Standards® in Legislation; ISO, IEC, BSI and more
   6
  e
  e
  r
   f
Do you need to Manage Standards Collections Online?
  a
  s
   i Learn about  LexConnect, All Jurisdictions, Standards referenced in Australian legislation
  s
   i
   h
   T Do you want to know when a Standard has changed?
Want to become an SAI Global Standards Sales Affiliate? 

Learn about other SAI Global Services:

LOGICOM Military Parts and Supplier Database 

Metals Infobase Database of Metal Grades, Standards and Manufacturers
Materials Infobase Database of Materials, Standards and Suppliers
Database of European Law, CELEX and Court Decisions

Need to speak with a Customer Service Representative - Contact Us

http://slide pdf.c om/re a de r/full/iso-15667 7/7