Disclaimer
Our policy is one of continuous development. Accordingly the design of our products may change at any time.
Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide and is intended
for information purposes only.
Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We cannot be held
responsible for any reliance on any decisions taken on its contents without specific advice.
Page 1 of 13 508520826.xls 02/03/2021
Cortec Phase 1
Information required with order
Versions Order - No.
P12x Overcurrent protection P12 0 0 0 1
Variant
Earth or Single Phase Overcurrent 0
Earth current input
0.1 - 40 IN, nom A
0.01 - 8 IN, nom B
0.002 - 1 IN, nom C
Auxiliary voltage Digital input voltage
24 - 60 Vdc 24 - 60 Vdc A
48 - 150 Vdc 48 - 150 Vdc F
130 - 250 Vdc /110 - 250 Vac 105 - 145 Vdc (special application) H
130 - 250 Vdc /110 - 250 Vac 130 - 250 Vdc / 100 - 250 Vac M
48 - 150 Vdc 48 - 150 Vdc (ac immune) T
130 - 250 Vdc /110 - 250 Vac 130 - 250 Vdc (ac immune) U
Communication interface
Modbus 1
Courier 2
IEC 60870 3
DNP3.0 4
Language
French 0
English / American 1
Spanish 2
German 3
Italian 4
Russian 5
Polish 6
Portuguese - Not available 7
Dutch - Not available 8
Czech - Not available A
Hungarian - Not available B
Greek - Not available C
Chinese - Not available D
Turkish - Not available E
Page 2 of 13 508520826.xls 02/03/2021
Order form MiCOM P12x
Ready-to-use configuration
P12x Overcurrent
Protection P12 0 0 0 2
Variant
Earth or Single Phase Overcurrent 0
Earth current input
0.1 - 40 IN, nom A
0.01 - 8 IN, nom B
0.002 - 1 IN, nom C
Auxiliary voltage Digital input voltage
48 - 250 Vdc / 48 - 240 Vac 105 - 145 Vdc (special application) H
48 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc T
48 - 250 Vdc / 48 - 240 Vac 110 Vdc -30% / +20% (special application) V
24 - 250 Vdc / 48 - 240 Vac 220 Vdc -30% / +20% (special application) W
Communication interface 24 - 250 Vdc / 24 - 240 Vac Z
Modbus
Courier 1
IEC 60870 2
DNP3.0 3
Language 4
French
English / American 0
Spanish 1
German 2
Italian 3
Russian 4
Polish 5
Turkish 1) 6
Platform E
SE look&feel Phase 2
Latest Major Software release 2
V ?.?
Latest Minor Software release *
V ?.?
Pre-fixed HMI *
No 3)
Yes (no withdrawability) 0
Sealed Cover 3) 1
Yes (no withdrawability) + Sealed Cover 2
3
NOTES :
1)
Available from V11.E onwards
3)
Not available with Auxiliary voltage/Digital input voltage code T
02/03/2021
Order form configurator MiCOM P120
Ready-to-use configuration
1-3 4 5 6 7 8 9 10 11 12 13 14
Single Phase or Earth Overcurrent Relay P12 0 A 0 0 Z 1 1 2 B F 0
SAP PART NUMBER E120A00Z112BF0
Earth Current Input
0.1 to 40 Ion
0.01 to 8 Ion A
0.002 to 1 Ion
Auxiliary Voltage / Digital Input Voltage
48 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc / 24 - 240 Vac
24 - 250 Vdc / 48 - 240 Vac
Z
Communication
MODBUS
KBUS / COURIER
IEC60870-5-103
1
DNP3
Default HMI (Human / Machine Interface) Language
French
English
Spanish
German
Italian 1
Russian
Polish
Turkish
Hardware Version
Phase 2 with standard display 2
Software Version
Software Version V11.F
BF
Mounting option :
No (default)
Pre-Fixed HMI (no withdrawability)
Sealed Cover 0
Pre-Fixed HMI (no withdrawability) + Sealed Cover
02/03/2021
Master Text
P120A00Z112BF0
Single Phase or Earth Overcurrent
Earth Current Input :
0.1 to 40 Ion x Nominal Earth Current
Auxiliary Voltage :
24 - 250 Vdc / 48 - 240 Vac
Digital Input Voltage :
24 - 250 Vdc / 24 - 240 Vac
Communication Protocol :
MODBUS
Default HMI Language :
English
Hardware Version :
Phase 2
Software Version :
V11.F
Mounting option :
No (default)
Page 5 of 13 508520826.xls 02/03/2021
P120A00Z112BF0 Quantity
Item Description
EGN0382004 Case and Chassis 1
E518414101 Assy front interface 20TE 1
E20720811Z Power supply board 1
EZB5321126 Screw M3 X 16 recessed pan head steel 4
EZB5017036 Washer 4
EZB4018118 Self tapping screw 8
E517725101 Product Label 4
E518837101 Extractor 1
E843992001 Cable Ties 1
E517719101 Screw Pack 1
E518326101 Connection Diagram 1
E518327101 20TE Cardboard Box 1
EA00026928 VCI Bag 1
E517060101 Operaror label 4
1
Location
1, 4
2, 3, 6, 11, 12, 23
7
9
13
10
17
23
Issue : 001 - As at 03/12/98
Issue : 002 - As at 14/12/98 - Adding "XX" for digits 6 & 7.
Issue : 003 - As at 06/01/99 - Adding and amending available from dates for language variants.
Issue : 004 - As at 03/06/99 - Digits 5 & 7 exchanged, skeletons were ANNNXXAAXXX, model ranges were P120/121/123, so
Issue : 005 - As at 16/12/99 - Dutch language variants added effective 01/01/2000.
Issue : 006 - As at 06/05/02 - DNP3.0 Protocol added effective 06/05/2002.
Issue : 007 - As at 11/03/03 - Hungarian & Greek languages added effective ??/??/????.
Issue : 008 - As at 04/07/03 - Languages availability amended to instructions from Bassam Dhaiby's e-mail dated 01/08/03
Issue : 009 - As at 14/01/04 - "T","U" & "H" variants of Aux supply voltage with "special digital inputs voltages" added.
Issue : 010 - As at 27/02/04 - Protocol text on MIFAS Data worksheet corrected to show DNP3.0.
Issue : 011 - As at 19/08/04 - "EA" specials restricted to P122 & P123 Variants only per F. Bel e-mail of 18/08/04, Livery option
Issue : 012 - As at 03/09/04 - Language option was "Greek: (AVAILABLE ONLY FOR P123 !)" per M Morlotti's e-mail dated 31
Issue : 013 - Areva livery was available from 04/10/04 & Alstom until 01/11/04 per Gary Jones e-mail of today - 21/10/04.
Issue : 014 - Areva livery was denoted by digit #11=2, now reverted to #11=1 per G Jones e-mail of 19/01/05 - 20/01/05.
Issue : 015 - Bills of Material sheets added - 20/01/05.
Issue : 016 - Term "special EA" replaced by "ac immune" per A Darby's e-mail of 25/11/05 - 28/11/05.
Issue : 017 - Reformatted spreadsheet so that Hardware Version is the first choice to be made - 15/02/06.
Issue : 018 - Cortec worksheets added, BOM worksheets deleted - 15/02/06.
Issue : 019 - Note added to disclaimer, text changes to list boxes - 18/02/06.
Issue : 020 - Phase 1 Language options amended and DI options to mirror cortec as per JP Petit e-mail - 20/02/06
Issue : 021 - Turkish language option added to all EXCEPT P120. Configurator amended to "hide" digits 13 & 14 fo
Issue : 022 - Digital Input voltages retrospectively corrected per J-P Petit's e-mail of 17/05/06 - 17/05/06.
Issue : 023 - Digital Input voltages retrospectively corrected per J-P Petit's e-mail of 19/05/06 - 31/05/06.
Issue : 024 - Language options retrospectively corrected to make the same for phases I and II (except for Turkish o
29/08/06 - 29/08/06.
Issue : 025 - Language options retrospectively corrected to make Chinese not available in phase II for P120, per J-
Issue : 026 - Date Drivers amended to remove "… :V10a ----> Aa" from "Latest firmware release ...", per J-P Petit's
Issue : 027 - Date Drivers amended to block Phase II hardware with graphical HMI & option "T" of Phase II, per J-P
Issue : 028 - Date Drivers amended to define SW versions for Phase II hardware, per J-P Petit's e-mail of 12/09/06
Issue : 029 - Date Drivers amended to retrospectively change language options for Phase 1, add "special applicatio
unit" for options "V" and "W", per J-P Petit's e-mail of 21/09/06 - 22/09/06.
Issue : 030 - Master Text amended to show detail of software, Cortecs and Date Drivers amended to change langu
e-mail of 22/09/06 - 25/09/06.
Issue : 031 - Database tables of Digital Inputs & Auxiliary Voltages resequenced, Date Drivers tables extended to in
Software displays added, per J-P Petit's e-mail and telephone conversation of 22/09/06 - 25/09/06.
Issue : 032 - Database tables of Digital Inputs & Auxiliary Voltages repopulated and Software display changed, per
Issue : 033 - Date Drivers tables extended to include Software array for each Variant and Software display changed
Issue : 034 - Master Text corrected to show Software Version properly - 29/09/06.
Issue : 035 - Date Drivers corrected to show Turkish language option as "E" and show Digital Input variants "T" and
Issue : 036 - Digital Input Voltage for option "F" retrospectively (back to 15/02/06) corrected on Cortec phases 2,3 a
- 10/11/06.
Issue : 037 - Separate Cortecs now for P120/1/2/3. Digital Input Voltages on Cortec phases 2,3 and Date Drivers c
Issue : 038 - CID SBIA-74J9SZ implemented with software V11.B/BB and altered display of software on Configurat
P120.PRR11.B Issue Z. - 29/06/07.
Issue : 039 - Cortec Phase 2 & Database amended to show revised availability message for Options V & W per F T
Issue : 040 - SW Released V11.C as per SBIA-7BRJNM - 19/02/08
Issue : 041 - DI Voltage for phase 2 adjusted to read 24 -250Vdc / 24 - 240Vac against auxiliary voltage of 24 - 60V
Issue : 042 - Worksheet added showing Phase 2 equivalent of any Phase 1 configuration - 23/06/08
Issue : 043 - Configurator updated as per Florent Taesch's synthesis file - 06/10/08
Issue : 044 - Pop-up note on Configurator specifying sites for power supply/opto variant removed - 10/10/08
Issue : 045 - SW Release V11.F as per SBIA-7LWD9V which invalidates all previous V11.x software versions - 04/
Issue : 046 - SW versions V11.A & V11.C to V11.E reinstated as per CID SBIA-7PFBXY,universal "Z" power supply
Issue : 047 - Universal "Z" power supply option introduction set as notional date of 01/07/09 - 18/03/09
Issue : 048 - Pre-fixed HMI option hidden on Cortec, Configurator,Phase 1 to Phase 2 Equivalent & Master Text un
Issue : 049 - Notional date for Pre-fixed HMI option hidden on Cortec, Configurator,Phase 1 to Phase 2 Equivalent
Issue : 050 - CID SBIA-7UNB76 with Pre-fixed HMI option , Universal power supply, Optional mounting variants, DN
Issue : 051 - correction to remove DNP software restriction - 04/09/09
Issue : 052 - correction to add E517060101 & attribute to E518355101 - 07/09/09
Issue : 053 - addition of EGN0055002 : Chinese secondary cover as per SBIA-83SDBL - 29/03/10
Issue : 054 - quantity of E843992001 amended to 1 as per SBIA-84HBRZ - 20/04/10
Issue : 055 - Phase 2 voltage options A & F removed as per SHAL-85EHHT - 18/05/10
Issue : 056 - 518414114 replaces 518414104 as per SBIA-88GCW3 - 16/09/10
Issue : 057 - Auxiliary Voltage rating for Universal Power Supply option, 'Z', amended to 24-250Vdc/48-240Vac as
Issue : 058 - SW Release V11.D per SBIA-8BNGW2. Phase 1 removed from configurator, SW availability updated
Issue : 059 - SW Release V11.E, including Turkish language release, per RSCH-8HE9MK.- 07/06/11
Issue : 060 - Tendering sheet added
Issue : 061 - SW Release V11.F per SBIA-8WYBWM.- 23/08/12
Issue : 062 - Equipped PCBAs introduced - 10/06/13
Issue : 063 - SW versions (V10.D & V11.B) obsoleted per SBIA-9AYGDB- 10/09/13
Issue : 064 - SW versions (V11.D & V11.E) obsoleted per RKLI-9TC5Y2 - 10/02/15
Issue : 065 - O2 kill reference warning added - 19/11/19
Issue : 066 - Power supply option 'H' and software version 11.C (BC) removed from offer as per Obsolescence Not
1 2 3 4 5 6 7 8 9 10 11 12 13
Cortec Landing cell : P120B00Z102BF0 P 1 2 0 B 0 0 Z 1 0 2 B F
Configurator feedback : P120A00Z112BF0 P 1 2 0 A 0 0 Z 1 1 2 B F
Cortec digit control 1 P
Cortec digit control 2 1
Cortec digit control 3 2
Cortec digit control 4 0
Earth Current Input 1 A
Constant 0 0
Auxiliary Voltage / 2 Z
DI Voltage 1
Communication 1 1
Default HMI (Human / Mac 2 1 2
Software Version 1 B F
Mounting option : 1
1
1
1
1
1
1
14
0
0 double digit in same row
5
6
7
8
9
10
11
12
13
14
15
0 16
0
0
0
0
0
0
0
0
25
26
27
28
29
30
