Scribd
Upload
157 views1 page

Drilling Machine TR40

This document provides specifications for the TR 40 radial drill. It has an arm that is height adjustable and hydraulically operated for feed and spindle drive. Standard accessories include a cooling system, work lamp, and fixed table. Key specifications include a maximum drilling capacity of 40mm in steel, tapping capacity up to M30/M36, and dimensions of 2100x750x2450mm with a weight of 2500kg. It has 16 variable spindle speeds from 32 to 2500rpm.

Uploaded by

عمر عمر
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
157 views1 page

Drilling Machine TR40

This document provides specifications for the TR 40 radial drill. It has an arm that is height adjustable and hydraulically operated for feed and spindle drive. Standard accessories include a cooling system, work lamp, and fixed table. Key specifications include a maximum drilling capacity of 40mm in steel, tapping capacity up to M30/M36, and dimensions of 2100x750x2450mm with a weight of 2500kg. It has 16 variable spindle speeds from 32 to 2500rpm.

Uploaded by

عمر عمر
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DATASHEET

TR 40 Radial drill

DESCRIPTION
Arm height adjustable through elevating screw and
elevating motor
Hydraulic operated feed and spindle drive
TR 60 with Hydraulic-mechanical clamping

STANDARD ACCESSORIES
Cooling system
Low-voltage work lamp
Fixed table
Service wrenches

DATASHEET UM VALUE
Max Drilling capacity in steel mm 40
Tapping capacity (steel / cast iron) M30/M36
Machine table dimensions mm 1400x600x200
Cube table dimensions mm 450x600x450
Max distance between spindle and column mm 1300
Min. distance between spindle and column mm 300
Drill head travel (horizontal) mm 1000
Max. distance between spindle nose and table mm 1120
Min. distance between spindle nose and table mm 300
Corsa braccio (verticale) / Arm stroke (vertical) mm 540
Morse taper CM 4
Max. drilling depth mm 280
N° of speeds (range) rpm 16 (32 ÷ 2500)
Feed (quantity / range) mm/giro 8 (0,1 ÷ 1,25)
Elevating motor kW 3
Elevating motor kW 0.75
Voltage V/Hz 400/50
Dimensions mm 2100x750x2450
Weight kg 2500

We reserve the right to make changes without notice

You might also like