YTD
(Yanmar Diagnostic Tool)
January 2006
YTD (Yanmar Diagnostic Tool)
Installation of Software and
use of the Diagnostic Tool
2 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TABLE OF CONTENT
I. DEFINITIONS
II. INSTALL THE SOFTWARE
III. USE THE SOFTWARE
IV. TRAINING MODE
3 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
DEFINITIONS
• YDT: Yanmar Diagnostic Tool (same as « Insite » of Cummins &
« e-Doctor » of Doosan).
• E-ECU: Electronic - Engine Control Unit
• FIP / FOP: ‘Fuel Injection Pump’ also called ‘Fuel (Diesel) Oil Pump’
• DATA STRUCTURE IN ECU: Control software + MAP + TRIM DATA
• MAP: Tables of fuel injection quantity belonging to t°, load, …
• TRIM DATA: Data recorded in the ECU and related to a specific FIP
• DTC: Diagnostic (errors) Tool Code (not the same as a flash lamp
codes)
• FFD: Freeze Frame Data
4 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
INSTALL THE SOFTWARE
- INSTALL THE SOFTWARE
1. Serial Number – Written on cd box decal
2. License Number – Written on cd box decal
NOTICE THAT CAPITALS & SMALL LETTER ARE USED (case sensitive)
ENTER A USER ID & Password – your choice, these are not pre determined
- A TYPICAL WORK SESSION STARTS:
1. Log in with the chosen ID & Password : see a login session welcome
screen
5 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
USE OF THE SOFTWARE
- See the
welcome
screen
- Select button
« INDUSTRIAL
ENGINES »
- Only ‘English’
is available. No
other language
currently.
6 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
USE OF THE SOFTWARE
- Key In the ID &
Password
- Expert Mode can be accessed when
connected to a machine through a gateway
module (install the USB driver before first
connection-see Yanmar user manual)
- Speed rate shall be 500K & address shall
be engine
- Training Mode shall be used for software
operation when not connected to an ECU
- Flash-ROM is for up-load of ZIP files in
« service ECU »
7 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE
- File:
1. Exit : stop session
2. Menu: Back to
former screen
- View:
1. Shows the 8 menus
also available from
the left side screen
menu (system
information, …)
2. Development mode:
not used
- Operation:
1. Gives access to the
top bar menu.
Varies for each
menu selected with
« View »
8 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE
- Tool:
1. System settings:
do not modify
2. User set: add
more user name
with own priority
level, ID &
Password
3. Option: Select
units.
Choose « TNV »
in section
« Training Mode
Set up »
- Version:
1. Gives the
software version
9 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE
- TRAINING MODE
10 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE
- TRAINING MODE
11 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE
- TRAINING MODE
12 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-System Information
- Gives info loaded
in ECU memory:
1. ECU P/N & S/N
2. FOP P/N & S/N
3. Engine Type
- DTC:
1. Active code:
unresolved
errors
2. Logged code: is
resolved errors
- File save:
Save numerical
data in a file
- Screen BMP save:
It is a print
screen
13 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Diagnostic Codes
- Active DTC
cluster:
1. Informes on
current errors
2. Provides action
guidance
- Logged cluster:
1. Gather both active
& resolved errors
(red buttons for
actives errors)
2. Provides action
guidance
14 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Diagnostic Codes
- DTC
information
cluster:
1. SPN of no use
for Doosan
2. FMI of no use
for Doosan
3. Search function:
works with
strings not
numbers of
errors
- Search i.e:
could give
information on
all errors
affecting
« accelerator »
15 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Freeze Frame Data
- FFD is usefull when
an ECU fails and
causes the engine
to stop (3 cases):
1. Speed sensor error
2. Over speed
3. Rack actuator
- Recorded Data
cluster:
1. Select data where
information are
needed by pressing
« Data set » button
on top bar menu
(Makes table header)
2. Click on a DTC
number to see
values BEFORE
failure occurs (sec)
16 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Freeze Frame Data
- Trend Graph
cluster:
1. Select up to 4
parameters as well
as top & bottom
graph scales by
pressing « Graph
Top » button on
top bar menu
2. Select up to 4
parameters as well
as top & bottom
graph scales by
pressing « Graph
bottom » button
on top bar menu
3. Click on GRAPH
itself to see real
recorded values in
top right side of
the screen under
title « cursor
Value »
17 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Diagnostic Test
- D test
- is usefull for making
‘Remote control’,
detect seized ‘Rack
actuator’ by graph,
get values of
parameters, …
- Pulse/Analog cluster:
1. Press ‘Refresh’ or
‘Auto Refresh’ to get
updated data for the
parameters
2. Click on the black
square from top bar
menu to stop records
18 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Diagnostic Test
Digital IN cluster:
1. It gives the switch
activation or de-
activation status
recorded by design
in the ECU
2. Switches can not
be modified.
3. It allows to better
understand the
machine behavior
19 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Diagnostic Test
Digital OUT cluster:
1. It gives the switch
activation or de-
activation status
recorded in ECU as a
result of current
machine state (pre-
heat completed or
not, …)
2. Switches can be
modified for making
REMOTE CONTROL
(force machine
behavior) by clicking
in ‘On/Off’ column
3. Changes are
validated by entering
your ID & Password
20 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Diagnostic Test
- Active Control cluster:
1. It allows to remote
control the machine by
forcing numerical
values (i.e. engine RPM,
…)
2. Press ‘RUN’ to start the
remote control of a
parameter
3. Should a graph record
be selected, the graph
shall be available to
see with ‘Active
Control Graph’ cluster.
The button is red in
‘Graph’ column.
4. Line 3 allow to see
seized rack behavior
on ‘Hyst. Meas.’ cluster
21 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Diagnostic Test
- Hysteresis cluster:
1. X-Y is the one to select
2. Y is ‘Rack bit’: Rack
proportional valve
position
3. X is ‘Duty bit’: current
signal given to the
proportional valve
4. The curve must be
smooth as shown
because the postion is
proportional to the input
signal.
5. Failure is shown by:
22 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Data Logging
- DLogging is useful for
recording data on a
running machine
(Freeze Frame is when
machine cannot start)
- Data Monitor cluster:
1. Press ‘Data set’ for
selecting data to be
recorded
2. Press ‘Sampling set’ to
select sampling rate
(default is 100ms)
3. Press ‘Trigger set’ to
select the parameter
generating a record
(Delay: qty records
before trig, storage: full
qty of records-including
delay !!!)
23 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-Historical Data
- Historical Data
shall be used for
investigating operating
condition of the engine
(time vs load over full
life)
Map Table cluster:
1. It is the most interesting
cluster because user
friendly
2. Use the map in case to
much fuel consumption
to identify excessive
IDLE condition of
operators
24 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-ECU identification
- ECU Identification:
gives same data as
‘System Information’
but with much more
details
- All clusters:
1. Analog channels
shows for each
parameter the range of
allowed values, units
zero value (offset),
sensor precision
(resolution)
2. ECU ID Information
gives P/N information
3. ECU data Saved: gives
engine & pump Trim
Data (CS: check sum
for correct imput of
Trim [power comp.])
25 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
TRAINING MODE-ECU identification
- System Installation:
gives the possiblity to
enter TRIM DATA, when
a FIP or ECU should be
replaced by a new one.
- All clusters:
1. Press the ‘Exchanges’
button
2. Choose FIP or ECU
3. When replacing FIP:
select Manual (enter 9
codes) or insert the ‘ZIP
file’ provided by Bobcat
4. If change ECU: transfer
ECU to PC or PC to ECU
26 | YTD (Yanmar Diagnostic Tool) – 02 / 2009
