Scribd
Upload
239 views1 page

Inspection Certificate: (EN10204 3.1/ISO 10474 3.1)

This inspection certificate summarizes the testing of steel sleeves according to specification JIS G3454 STPG370. Two sleeves of different dimensions made from heat NS081 met the chemical composition, mechanical property, and visual inspection requirements. The certificate provides the heat treatment, dimensions, quantities, and test results for the sleeves.

Uploaded by

Faishal Khairul Umam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
239 views1 page

Inspection Certificate: (EN10204 3.1/ISO 10474 3.1)

This inspection certificate summarizes the testing of steel sleeves according to specification JIS G3454 STPG370. Two sleeves of different dimensions made from heat NS081 met the chemical composition, mechanical property, and visual inspection requirements. The certificate provides the heat treatment, dimensions, quantities, and test results for the sleeves.

Uploaded by

Faishal Khairul Umam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAMYOUNG FITTING

INSPECTION CERTIFICATE 63,Nakdongnam-ro 533beon-gil,


Gangseo-gu, Busan
(EN10204 3.1/ISO 10474 3.1) Tel: 82-51-832-0211~2
Fax: 82-51-832-0213

Customer 에스제이메탈인터네셔널 Certificate No. 20201209026 Date 2020-12-09

P.O No. P-SF-201106-PAL Project Name

Job No.

Specification for Material JIS G3454 STPG370 Dimension and Visual Inspection GOOD

HCN Description Q'ty (pcs) Heat Treatment Line No. ITEM CODE
NS081 SLEEVE 7.0T PBE×SMLS OD76.3×100L 26 HOT FINISH 103
NS081 SLEEVE 6.0T PBE×SMLS OD63.0×100L 80 HOT FINISH 102

CHEMICAL COMPOSITION(%)
spec. C Mn P S Si Raw Raw Maker
HCN Max 0.250 0.900 0.040 0.040 0.350 Heat No
Min - 0.300 - - -

NS081 L 0.180 0.520 0.017 0.006 0.200 J8L2693 NSSMC

MECHANICAL PROPERTIES
Y.S T.S E.L Red. Hardness Test
spec.
MPa (%) (%) HB
HCN
Max - - - - -
Min 215.0 370.0 30.0 - -
NS081 P 308.0 471.0 40.0

We hereby certify that the material herein has been made and tested in accordance with the above specification and also with the
requirements called for by the above order.
Remark :
Legend:
HB:Brinell AC:Air Cool
ST:Solution Treatment OC:Oil Cool
SR:Stress Relieving WQ:Water Quenched
HCN:Heat Code No.
N:Normalized
T:Tempered L:Ladle
A:Annealed P:Product
Q:Quenched
(G): Hot-Dip Galvanized Coating
(EG) : Electronic Galvanized

Reviewed by :
Witnessed by : Approved by :
Director of Quality Assurance Dep't

You might also like