Typical Power Configuration for RRU5909s

Contents
6.1.1.6.10.3.1 Typical Power Configuration for RRU5909s

6.1.1.6.10.3.1 Typical Power Configuration for

RRU5909s
An RRU5909s is a 2TX RF module that can work in UMTS, LTE FDD, GL, or UL mode.
 Table 1 and Table 2 provide the typical power configuration for the RRU5909s (LTE FDD,
1800 MHz).
 Table 3 and Table 4 provide the typical power configuration for the RRU5909s (UMTS, 2100
MHz).
 Table 5 and Table 6 provide the typical power configuration for the RRU5909s (LTE FDD,
2100 MHz).
 Table 7 and Table 8 provide the typical power configuration for the RRU5909s (GL MSR,
1800 MHz).
 and Table 10 provide the typical power configuration for the RRU5909s (UL MSR,
Table 9
2100 MHz).

NOTE:
 If the power sharing feature is activated, assume that UEs in a cell are randomly located.
 If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module is
placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
 Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the gains
of dynamic power sharing. In most cases, network plans are designed on the basis of power specifications of
dynamic power sharing.
 Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell, GBFD-
114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501 Enhanced
Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing feature can be used
together with these features. However, the dynamic power sharing feature currently cannot be used together with the
GBFD-117002 IBCA (Interference Based Channel Allocation), GBFD-117001 Flex MAIO, GBFD-118701 RAN
Sharing, and GBFD-114001 Extended Cell features in GBSS8.1, GBSS9.0, and later versions.
 When two LTE carriers are configured, it is recommended that the power spectrum density (PSD) of the two
carriers be set to the same value. Power spectrum density = Carrier output power/Carrier bandwidth (1.4 MHz and 3
MHz bandwidths are considered as 5 MHz bandwidth in this formula.)
Table 1 Output power for the RRU5909s (LTE FDD, 1800 MHz)

Mode Total Number of LTE Output Power per LTE Bandwidth of LTE FDD
FDD Carriers FDD Carrier (W) Carrier (MHz)

LTE FDD 1 (MIMO) 2x40 1.4, 3

1 (MIMO) 2x60 5, 10, 15, 20

2 (MIMO) 2x30 1.4, 3, 5, 10, 15, 20

2 (MIMO) Carrier 1: 2x20 1.4, 3, 5, 10, 15, 20

Carrier 2: 2x40

Table 2 Configuration of RRU5909s PAs (LTE FDD, 1800 MHz)

Configuration PA1 PA2

Scenario (Total
Number of Number of LTE Output Power per Number of LTE Output Power per
Carriers) FDD Carriers LTE FDD Carrier FDD Carriers LTE FDD Carrier
(W) (W)

LTE FDD 1 1 40 1 40
(MIMO)

LTE FDD 1 1 60 1 60
(MIMO)

LTE FDD 2 2 30 2 30
(MIMO)

LTE FDD 2 2 Carrier 1: 20 2 Carrier 1: 20

(MIMO) Carrier 1: 40 Carrier 1: 40

Table 3 Output power for the RRU5909s (UMTS, 2100 MHz)

Mode Total Number of UMTS Carriers Output Power per UMTS Carrier
(W)

UMTS 1 60

2 60

3 30

4 30

5 20
Table 1 Output power for the RRU5909s (LTE FDD, 1800 MHz)

Mode Total Number of LTE Output Power per LTE Bandwidth of LTE FDD
FDD Carriers FDD Carrier (W) Carrier (MHz)

6 20

7 15

8 15

1 (MIMO) 2x60

2 (MIMO) 2x30

3 (MIMO) 2x20

4 (MIMO) 2x15

2 + 1 (MIMO) Non-MIMO carrier: 30

MIMO carrier: 2x30

4 + 1 (MIMO) Non-MIMO carrier: 20

MIMO carrier: 2x20

2 + 2 (MIMO) Non-MIMO carrier: 20

MIMO carrier: 2x20

6 + 1 (MIMO) Non-MIMO carrier: 15

MIMO carrier: 2x15

4 + 2 (MIMO) Non-MIMO carrier: 15

MIMO carrier: 2x15

2 + 3 (MIMO) Non-MIMO carrier: 15

MIMO carrier: 2x15

Table 4 Configuration of RRU5909s PAs (UMTS, 2100 MHz)

Configuration PA1 PA2

Scenario (Total
Number of Number of UMTS Output Power per Number of UMTS Output Power per
Carriers) Carriers UMTS Carrier (W) Carriers UMTS Carrier (W)

UMTS 1 1 60 0 0

UMTS 2 1 60 1 60

UMTS 3 2 30 1 30
Table 4 Configuration of RRU5909s PAs (UMTS, 2100 MHz)

Configuration PA1 PA2

Scenario (Total
Number of Number of UMTS Output Power per Number of UMTS Output Power per
Carriers) Carriers UMTS Carrier (W) Carriers UMTS Carrier (W)

UMTS 4 2 30 2 30

UMTS 5 3 20 2 20

UMTS 6 3 20 3 20

UMTS 7 4 15 3 15

UMTS 8 4 15 4 15

UMTS 1 (MIMO) 1 60 1 60

UMTS 2 (MIMO) 2 30 2 30

UMTS 3 (MIMO) 3 20 3 20

UMTS 4 (MIMO) 4 15 4 15

UMTS 2 + 1 2 30 2 30
(MIMO)

UMTS 4 + 1 3 20 3 20
(MIMO)

UMTS 2 + 2 3 20 3 20
(MIMO)

UMTS 6 + 1 4 15 4 15
(MIMO)

UMTS 4 + 2 4 15 4 15
(MIMO)

UMTS 2 + 3 4 15 4 15
(MIMO)

Table 5 Output power for the RRU5909s (LTE FDD, 2100 MHz)

Mode Total Number of LTE Output Power per LTE Bandwidth of LTE FDD
FDD Carriers FDD Carrier (W) Carrier (MHz)

LTE FDD 1 (MIMO) 2x60 5, 10, 15, 20

2 (MIMO) 2x30 5, 10, 15, 20

Table 6 Configuration of RRU5909s PAs (LTE FDD, 2100 MHz)

Configuration PA1 PA2

Scenario (Total
Number of Carriers) Number of LTE Output Power per Number of LTE Output Power per
FDD Carriers LTE FDD Carrier FDD Carriers LTE FDD Carrier
(W) (W)

LTE FDD 1 1 60 1 60
(MIMO)

LTE FDD 2 2 30 2 30
(MIMO)

Table 7 Output power for the RRU5909s (GL MSR, 1800 MHz)

Mode Total Number Total Number Output Power Output Power Bandwidth of
of GSM of LTE FDD per GSM per LTE FDD LTE FDD
Carriers Carriers Carrier (W) Carrier (W) Carrier (MHz)

GSM + LTE 1 1 (MIMO) 20 2x40 1.4, 3, 5, 10, 15,

FDD 20

1 1 (MIMO) 30 2x30 1.4, 3, 5, 10, 15,

20

1 1 (MIMO) 40 2x20 1.4, 3, 5, 10, 15,

20

2 1 (MIMO) 20 2x40 1.4, 3, 5, 10, 15,

20

2 1 (MIMO) 30 2x30 1.4, 3, 5, 10, 15,

20

2 1 (MIMO) 40 2x20 1.4, 3, 5, 10, 15,

20

3 1 (MIMO) 20 2x20 1.4, 3, 5, 10, 15,

20

4 1 (MIMO) 20 2x20 1.4, 3, 5, 10, 15,

20

4 1 (MIMO) 15 2x30 1.4, 3, 5, 10, 15,

20

5 1 (MIMO) 7.5 2x30 10

5 1 (MIMO) 12 2x20 1.4, 3, 5, 10, 15,

20
Table 6 Configuration of RRU5909s PAs (LTE FDD, 2100 MHz)

Configuration PA1 PA2

Scenario (Total
Number of Carriers) Number of LTE Output Power per Number of LTE Output Power per
FDD Carriers LTE FDD Carrier FDD Carriers LTE FDD Carrier
(W) (W)

6 1 (MIMO) 7.5 2x30 10

6 1 (MIMO) 12 2x20 1.4, 3, 5, 10, 15,

20

1 2 (MIMO) 20 2x20 1.4, 3, 5, 10

1 2 (MIMO) 20 Carrier 1: 2x30 Carrier 1: 1.4, 3,

Carrier 2: 2x10 5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

1 2 (MIMO) 30 Carrier 1: 2x20 Carrier 1: 1.4, 3,

Carrier 2: 2x10 5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

2 2 (MIMO) 20 Carrier 1: 2x10 Carrier 1: 1.4, 3,

Carrier 2: 2x30 5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

2 2 (MIMO) 20 2x20 Carrier 1: 1.4, 3,

5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

3 2 (MIMO) 10 2x20 Carrier 1: 1.4, 3,

5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

3 2 (MIMO) 15 Carrier 1: 2x10 Carrier 1: 1.4, 3,

Carrier 2: 2x20 5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

4 2 (MIMO) 20 2x10 Carrier 1: 1.4, 3,

5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10
Table 6 Configuration of RRU5909s PAs (LTE FDD, 2100 MHz)

Configuration PA1 PA2

Scenario (Total
Number of Carriers) Number of LTE Output Power per Number of LTE Output Power per
FDD Carriers LTE FDD Carrier FDD Carriers LTE FDD Carrier
(W) (W)

4 2 (MIMO) 10 2x20 Carrier 1: 1.4, 3,

5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

4 2 (MIMO) 15 Carrier 1: 2x10 Carrier 1: 1.4, 3,

Carrier 2: 2x20 5, 10, 15, 20
Carrier 2: 1.4, 3,
5, 10

Table 8 Configuration of RRU5909s PAs (GL MSR, 1800 MHz)

Configura PA1 PA2

tion
Scenario Number Output Number Output Number Output Number Output
(Total of GSM Power per of LTE Power per of GSM Power per of LTE Power per
Number Carriers GSM FDD LTE FDD Carriers GSM FDD LTE FDD
of Carrier Carriers Carrier Carrier Carriers Carrier
Carriers) (W) (W) (W) (W)

GSM 1 + 1 20 1 40 0 0 1 40
LTE FDD
1 (MIMO)

GSM 1 + 1 30 1 30 0 0 1 30
LTE FDD
1 (MIMO)

GSM 1 + 1 40 1 20 0 0 1 20
LTE FDD
1 (MIMO)

GSM 2 + 1 20 1 40 1 20 1 40
LTE FDD
1 (MIMO)

GSM 2 + 1 30 1 30 1 30 1 30
LTE FDD
1 (MIMO)

GSM 2 + 1 40 1 20 1 40 1 20
LTE FDD
Table 8 Configuration of RRU5909s PAs (GL MSR, 1800 MHz)

Configura PA1 PA2

tion
Scenario Number Output Number Output Number Output Number Output
(Total of GSM Power per of LTE Power per of GSM Power per of LTE Power per
Number Carriers GSM FDD LTE FDD Carriers GSM FDD LTE FDD
of Carrier Carriers Carrier Carrier Carriers Carrier
Carriers) (W) (W) (W) (W)

1 (MIMO)

GSM 3 + 2 20 1 20 1 20 1 20
LTE FDD
1 (MIMO)

GSM 4 + 2 20 1 20 2 20 1 20
LTE FDD
1 (MIMO)

GSM 4 + 2 15 1 30 2 15 1 30
LTE FDD
1 (MIMO)

GSM 5 + 3 7.5 1 30 2 7.5 1 30

LTE FDD
1 (MIMO)

GSM 5 + 3 12 1 20 2 12 1 20
LTE FDD
1 (MIMO)

GSM 6 + 3 7.5 1 30 3 7.5 1 30

LTE FDD
1 (MIMO)

GSM 6 + 3 12 1 20 3 12 1 20
LTE FDD
1 (MIMO)

GSM 1 + 1 20 2 20 0 0 2 20
LTE FDD
2 (MIMO)

GSM 1 + 1 20 2 Carrier 1: 0 0 2 Carrier 1:

LTE FDD 30 30
2 (MIMO) Carrier 2: Carrier 2:
10 10

GSM 1 + 1 30 2 Carrier 1: 0 0 2 Carrier 1:

LTE FDD 20 20
2 (MIMO)
Table 8 Configuration of RRU5909s PAs (GL MSR, 1800 MHz)

Configura PA1 PA2

tion
Scenario Number Output Number Output Number Output Number Output
(Total of GSM Power per of LTE Power per of GSM Power per of LTE Power per
Number Carriers GSM FDD LTE FDD Carriers GSM FDD LTE FDD
of Carrier Carriers Carrier Carrier Carriers Carrier
Carriers) (W) (W) (W) (W)

Carrier 2: Carrier 2:
10 10

GSM 2 + 1 20 2 Carrier 1: 1 20 2 Carrier 1:

LTE FDD 10 10
2 (MIMO) Carrier 2: Carrier 2:
30 30

GSM 2 + 1 20 2 20 1 20 2 20
LTE FDD
2 (MIMO)

GSM 3 + 2 10 2 20 1 10 2 20
LTE FDD
2 (MIMO)

GSM 3 + 2 15 2 Carrier 1: 1 15 2 Carrier 1:

LTE FDD 10 10
2 (MIMO) Carrier 2: Carrier 2:
20 20

GSM 4 + 2 20 2 10 2 20 2 10
LTE FDD
2 (MIMO)

GSM 4 + 2 10 2 20 2 10 2 20
LTE FDD
2 (MIMO)

GSM 4 + 2 15 2 Carrier 1: 2 15 2 Carrier 1:

LTE FDD 10 10
2 (MIMO) Carrier 2: Carrier 2:
20 20

Table 9 Output power for the RRU5909s (UL MSR, 2100 MHz)

Mode Total Number Total Number Output Power Output Power Bandwidth of
of UMTS of LTE FDD per UMTS per LTE FDD LTE FDD
Carriers Carriers Carrier (W) Carrier (W) Carrier (MHz)
Table 8 Configuration of RRU5909s PAs (GL MSR, 1800 MHz)

Configura PA1 PA2

tion
Scenario Number Output Number Output Number Output Number Output
(Total of GSM Power per of LTE Power per of GSM Power per of LTE Power per
Number Carriers GSM FDD LTE FDD Carriers GSM FDD LTE FDD
of Carrier Carriers Carrier Carrier Carriers Carrier
Carriers) (W) (W) (W) (W)

UMTS + LTE 1 1 (MIMO) 30 2x30 5, 10, 15, 20

FDD
2 1 (MIMO) 30 2x30 5, 10, 15, 20

3 1 (MIMO) 20 2x20 5, 10, 15, 20

4 1 (MIMO) 20 2x20 5, 10, 15, 20

1 (MIMO) 1 (MIMO) 2x30 2x30 5, 10, 15, 20

2 (MIMO) 1 (MIMO) 2x20 2x20 5, 10, 15, 20

3 (MIMO) 1 (MIMO) 2x15 2x15 5, 10, 15, 20

6 1 (MIMO) 15 2x15 5, 10, 15, 20

2 2 (MIMO) 20 2x20 5, 10, 15, 20

4 2 (MIMO) 15 2x15 5, 10, 15, 20

Table 10 Configuration of RRU5909s PAs (UL MSR, 2100 MHz)

Configura PA1 PA2

tion
Scenario Number Output Number Output Number Output Number Output
(Total of UMTS Power per of LTE Power per of UMTS Power per of LTE Power per
Number Carriers UMTS FDD LTE FDD Carriers UMTS FDD LTE FDD
of Carrier Carriers Carrier Carrier Carriers Carrier
Carriers) (W) (W) (W) (W)

UMTS 1 + 1 30 1 30 0 0 1 30
LTE FDD
1 (MIMO)

UMTS 2 + 1 30 1 30 1 30 1 30
LTE FDD
1 (MIMO)

UMTS 3 + 2 20 1 20 1 20 1 20
LTE FDD
1 (MIMO)
Table 10 Configuration of RRU5909s PAs (UL MSR, 2100 MHz)

Configura PA1 PA2

tion
Scenario Number Output Number Output Number Output Number Output
(Total of UMTS Power per of LTE Power per of UMTS Power per of LTE Power per
Number Carriers UMTS FDD LTE FDD Carriers UMTS FDD LTE FDD
of Carrier Carriers Carrier Carrier Carriers Carrier
Carriers) (W) (W) (W) (W)

UMTS 4 + 2 20 1 20 2 20 1 20
LTE FDD
1 (MIMO)

UMTS 1 1 30 1 30 1 30 1 30
(MIMO) +
LTE FDD
1 (MIMO)

UMTS 2 2 20 1 20 2 20 1 20
(MIMO) +
LTE FDD
1 (MIMO)

UMTS 3 3 15 1 15 3 15 1 15
(MIMO) +
LTE FDD
1 (MIMO)

UMTS 6 + 3 15 1 15 3 15 1 15
LTE FDD
1 (MIMO)

UMTS 2 + 1 20 2 20 1 20 2 20
LTE FDD
2 (MIMO)

UMTS 4 + 2 15 2 15 2 15 2 15
LTE FDD
2 (MIMO)

Parent Topic: Typical Power Configurations for RRUs

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Next topic >