KMC–650

ECONOMICAL MOBILE C-ARM

TECHNICAL DATA
Versatile, compact, economical and designed with advanced hardware and next generation
software, the KMC 650 is the perfect solution for small budgets.

Excellent high resolution imaging, dose management and increased functionality promote safety
and improved workflows.

FEATURES
‹‹ Compact Design with Expanded 31.5” (800mm) Free Space
and 39.3” (1,000mm) SID
‹‹ Increased Orbital Rotation: 135° C-arc
‹‹ High Dynamic Camera: 1K x 1K CCD
‹‹ High Frequency Monoblock Generator: 2kW/40kHz
‹‹ Multi-Pulse Mode up to Maximum Frames/Second: 30fps
‹‹ Convenient F-Key Presets
‹‹ Complete Compatibility: DICOM 3.0

1
Technical Specification for KMC–650
www.gemss-northamerica.com

System Configuration Specification Specification

STANDARD CONFIGURATION X-RAY TUBE Fluoroscopy mode
C-arm System ··C-arm Unit ··Type of X-ray tube ··Stationary anode Normal Fluoro
(KMC-650) ··Standard monitor cart ··Target angle ··16°
··Digital Image System – ··Operating Tube ··kV range ··40 – 100kV (1kV step)
CXView 3 (with Virtual Voltage ··40 - 110kV ··mA range ··0.5 – 4mA
Collimator and Air Kerma) ··Focal spot ··0.5 / 1.5 mm (0.1mA step)
··Manuals ··Inherent filtration ··0.8mmAl @ 50kV ··Pulse rate ··Continuous
··Single pedal foot switch (IEC 60522)
··- Additional Filtration ··2.0mmAl Multi pulse
(total:2.8mmAl)
OPTION ··kV range ··40 – 110kV (1kV step)
··mA range ··0.5 – 4mA
Radiography Unit includes Grid, Cassette IMAGE INTENSIFIER (0.1mA step)
set holder and Exposure
··Pulse rate ··1 pulses/sec
Handswitch. Cassette holder Field number 3 field (9” / 6” / 4.5”)
supports 11”x13” Cassette
Nominal entrance 230mm
holder size for 10”x12” Film Boost
size. (Unit : Inch) field size
··kV range ··40 – 100kV (1kV step)
Useful entrance ··N (9”) mode :
··mA range ··20mA (fixed)
Printer Thermal Printer field size 215mm (min.)
··Pulse rate ··15 pulses/sec
INSTALLATION CONDITION ··M1 (6”) mode :
160 ± 5mm
Installation Conditions ··M2 (4.5”) mode :
120 ± 5mm Radiography mode
SYSTEM POWER REQUIREMENTS ··kV range ··kV range 40 – 100kV
Line voltage Single phase 110 / 220 VAC Output image 25mm (1kV step)
diameter ··mA range ··mA range 20mA
··mAs range (fixed)
GROUNDING REQUIREMENTS Resolution ··N (9”) mode : 52Lp/cm ··mAs range
(central) ··M1 (6”) mode : 58Lp/cm 8 – 100mAs
Grounding must be provided in compliance with ··M2 (4.5”) mode:68Lp/cm
all applicable legal requirements for medically
used electrical equipment. DIS (DIGITAL IMAGE SYSTEM)
CCD CAMERA
Image Processor
AMBIENT CONDITIONS ··Type ··1/2” Interline,
anti-blooming CPU 2.6GHz
(Operation) CCD sensor
RAM 2GB
··Input power ··24VDC, 1A
··Ambient ··50°F (10°C) - 104°F (40°C) ··CCD scanning ··Interline transfer Storage 500GB
Temperature CCD
··Relative Humidity ··30~75% (No Condensation) ··Active pixels ··1024x1024 pixels Interface ··Storage: >35,000
··Atmospheric ··A/D conversion ··14 bit images
pressure ··700~1060 hPa ··Signal processing ··16 bit ··Keyboard/Mouse
··Video output interface ··Camera link ··USB 2.0 port
··Camera control ··RS–232 ··CD/DVD recorder
(Transportation & Storage)
interface
··Ambient ··5°C~40°C
Monitor
Preprocessing ··VGA gain
Temperature ··CDS gain Type B/W TFT active
··Relative Humidity ··5~90% (No Condensation) ··Clamp level matrix LCD
··Atmospheric ··Electronic shutter Quantity 2 ea
pressure ··500~1060 hPa ··Mechanical shutter (in a set)
Input power 12VDC 5A
X-RAY GENERATOR Monitor size 19”
Aspect ratio 4:3
Compliance ··Type ··High frequency Resolution 1280 x 1024
··Power output (kW) ··2kW
EN60601-1:2006 / EN60601-1-2:2007 / EN60601- ··Inverting frequency ··40kHz (Specification continued on page 4)
1-3:2008 / EN60601-2-28:2010 / EN60601-2-
54:2009

GEMSS North America, Inc. · Sales & Technical Support Center · 342 South 3rd Street · Hamburg, PA 19526, USA · (484) 665-3162

2
 Technical Specification for KMC–650
www.gemss-northamerica.com
72.0“ (1830 mm)

C-arm Unit

24 .2“ (614 mm)

31.4“ (800 mm)
18.1“ (460 mm)
11.7“ (298 mm)
31.4“ (800 mm (±.4%))
39.3“ (1000 mm)

27.2“ (692 mm)

68.7” (1745 mm)

40.4” (1025 mm)

38.4” (975 mm)

7.9” (200 mm)

31.4“ (800 mm)

20.3” (517 mm)

7.3“ (186 mm)

3.9” (100 mm)

47.6“ (1208 mm) 18.1“ (460 mm)

31.4“ (800 mm)

35.7“ (909 mm) 24.2“ (616 mm)

62.5“ (1590 mm)

Standard
46” (1170 mm)

Monitor Cart

23.9“ (608 mm)

GEMSS North America, Inc. · Sales & Technical Support Center · 342 South 3rd Street · Hamburg, PA 19526, USA · (484) 665-3162

3
Technical Specification for KMC–650
www.gemss-northamerica.com

Specification (cont)
Software Vertical Movement
19.7” (500mm)
Software CXView 1.0
Function Image processing
Image editing
Data communication
Data Storage (99 images per study)
Virtual Collimator
Air Kerma
Compatibility PACS (DICOM 3.0)
C–ARM UNIT
SID 39.3” (1000mm)
Free Space (Tube to 1.1) 31.4” (800mm)
Vertical movement 19.7“ (500mm) Horizontal
Horizontal movement 7.9“ (200mm) Movement
Orbital rotation
C–arc rotation
135° (45° / 90°)
360° 7.9” (200mm)
Planning movement ±12.5°
Reverse position Yes
Collimator Circular iris and 2-leaf shutter
Laser guide At tube (tube to 1.1 direction)
STANDARD MONITOR CART
Configuration Standard monitor cart
Digital Image system
Connection cable
Movement part No

Company’s products carry a two (2) year standard parts only

warranty that includes glassware.

Orbital Rotation
135° (90°/45°)

C-arc
Rotation
360°

Planning Motion ± 12.5°

(Dealer Information)

GEMSS North America, Inc. · Sales & Technical Support Center · 342 South 3rd Street · Hamburg, PA 19526, USA · (484) 665-3162