Scribd
Upload
302 views5 pages

Bus Tracking System Using RF Communication For Passenger Information Over IOT

This document describes a bus tracking system that uses RF communication over IoT to provide passenger information. The system includes an RF transmitter on buses that can send signals indicating the bus's location from four switches. An RF receiver at stations receives these signals and a microcontroller updates the bus location using an IoT module. This allows passengers to view real-time bus location information online rather than relying on voice announcements. The system has applications for tracking buses, trains, and other transportation to inform passengers.

Uploaded by

dileeppatra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
302 views5 pages

Bus Tracking System Using RF Communication For Passenger Information Over IOT

This document describes a bus tracking system that uses RF communication over IoT to provide passenger information. The system includes an RF transmitter on buses that can send signals indicating the bus's location from four switches. An RF receiver at stations receives these signals and a microcontroller updates the bus location using an IoT module. This allows passengers to view real-time bus location information online rather than relying on voice announcements. The system has applications for tracking buses, trains, and other transportation to inform passengers.

Uploaded by

dileeppatra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

BUS TRACKING SYSTEM USING RF COMMUNICATION FOR

PASSENGER INFORMATION OVER IOT

Abstract:

Now-a-days in railway stations, bus station, airports different voice based announcements
are given by the authorized people in different languages to help public. The announcement
consists of any delays, occurrence of train at particular station/bus stop and platform. The project
aims in designing a system which is capable updating the information about the bus location.

This device is designed to provide with a greater advantage producing updated


information which is available through internet using IoT module used in this project. This is
possible with the help of RF communication. RF transmitter is given with four switches which
represents four locations when particular switch is pressed i.e. RF receiver gets particular
frequency then the controller will understand the location and updates the same thing about bus
location using IoT module connected to the controller.

This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator
is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac out put of
secondary of 230/12V step down transformer.
Block Diagram:

Transmitter:
Receiver:
Contrast

16X2 LCD

RF
RF
Receiver Decode
r

Microcontro
ller

Reset GPRS/WiFi –
switch IoT module

Crystal
Oscillator

Existing System:

Now-a-days in railway stations, bus station, airports different voice based announcements are
given by the authorized people in different languages to help public. The announcements consists
of any delays, occurrence of train at particular station/bus stop and platform. The project aims in
designing a system which is capable updating the information about the bus location.
Proposed System:

The project aims in designing a system which is capable updating the information about
the bus location.

This device is designed to provide with a greater advantage producing updated information
which is available through internet using IoT module used in this project. This is possible with
the help of RF communication. RF transmitter is given with four switches which represents four
locations when particular switch is pressed i.e RF receiver gets particular frequency then the
controller will understand the location and updates the same thing about bus location using IoT
module connected to the controller.

Hardware Specifications:

 Battery Power supply


 RF Transmitter with encoder
 RF Receiver with Decoder
 GPRS/Wi-Fi Module
 Microcontroller
 LCD Display.
 LED Indicators.
 4 Button Keypad.

Software Specifications :

 Arduino Compiler

 Programming Language: Embedded C Language.


Tools Used:

 Arduino IDE Compiler- for code developing.


 Arduino compiler– for code dumping.
 Express SCH- for schematic design.

Applications:

 Buses
 Trains

 Metro Trains

 Travels and All Automobile services.

You might also like