Directional
12 1/4in SDi519 PDC
(311mm) ID: 65559D0001 FEATURES
The PX feature extends
PDC bit life by reinforcing its
gauge areas with diamond-
enhanced inserts (DEI) set
in highly wear-resistant
tungsten carbide.
Bit design is available with
ONYX fixed cutters for
improved thermal stability
in harder, more abrasive
formations, resulting in
greater wear resistance.
Replaceable Lo-Vibe Inserts
Smith Bits Directional bits consistently deliver superior performance in directional Increased cleaning, cooling,
applications with both push-the-bit and point-the-bit rotary steerable systems. and cuttings evacuation with
available hydraulic flows;
Specifications high flow rates with minimal
increase in pump pressure,
Total Cutters 35
and reduced risk a bit balling.
Cutter Size 16mm (5/8in), 19mm (3/4in)
Face Cutters (21) 19mm
Gauge Cutters (5) 19mm
Cone Cutters (4) 16mm, (5) 19mm
Blade Count 5
Nozzles 7 Standard Series 60N
Bit Connection Type 6 5/8 Reg
Gauge Length: 3 in....Protection: Options Available
Length Make-Up: 11.07 in....Overall: 16.008 in
Fishing Neck Diameter: 7.88 in....Length: 3.449 in
Operating Parameters
Bit Rotary Speed (RPM) Rotary Steerable BHA & Rotary Steerable
Weight-on-Bit 6000 To 40000 (lbf)
2700 To 18000 (daN)
2.7 To 18 (Tonnes)
Max Flow Rate 500 to 1200
Hydraulic Horsepower 1 to 6
Recommended Makeup 47,300 To 47,800
Torque
Operating paramaters are typical ranges. Please contact your Smith Bits
representative for recommendations for your individual well.
slb.com/directional
* Mark of Schlumberger
Copyright © 2015 Schlumberger. All Rights Reserved.
Date:08/26/2015 Datasheet:65559D0001
