0% found this document useful (0 votes)
106 views2 pages

Four Wheel Drive Systems

This document provides a diagram of the electrical connections for a four wheel drive transfer box system. It shows the connections between the battery, battery junction box, central junction box, transfer box control module, mode selector solenoid, and various switches and fuses. The transfer box control module receives power and ground connections and is connected to sensors and switches that control the transfer box mode selection.

Uploaded by

olyga mgol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
106 views2 pages

Four Wheel Drive Systems

This document provides a diagram of the electrical connections for a four wheel drive transfer box system. It shows the connections between the battery, battery junction box, central junction box, transfer box control module, mode selector solenoid, and various switches and fuses. The transfer box control module receives power and ground connections and is connected to sensors and switches that control the transfer box mode selection.

Uploaded by

olyga mgol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

308-07 FOUR WHEEL DRIVE SYSTEMS Transfer box

308-07 FOURTransfer
WHEEL DRIVE
box SYSTEMS

Battery (P100)
R,35.0 C1889-1 C0045-1 B,35.0 C1661-1

12.0 Volts

Battery Junction Box (P108) Transfer box control


module (D204)
C0574-1 FUSE 17E C0570-5 PU,2.5 C1854-6 C1854-5 N,2.5 C0557-1
TERM 30 TERM 31

30.0 Amps C1856-7 8mm


KEY LOCK DRIVE
NOT USED(V101)
Engine control-
module (ECM) (D131)
C1856-6 YB,MMBC C0635-58
CAN OUT HIGH

C1856-3 YN,MMBC C0635-45


Central Junction CAN OUT LOW
Box (P101)

C0819-1 LINK 2P C0591-2 R,6.0


C1854-4 YB,MMBA C3012-4 C3014-4 YN,0.5H SJ937
CAN IN HIGH
60.0 Amps
C1854-1 YN,MMBA C3012-5 C3014-5 YB,0.5H SJ938
(insert only for towing)
CAN IN LOW
C0585-5 FUSE 37P C0587-28 RB,0.5 C1856-2
TERM 15-NTRL MODE

5.0 Amps

C0585-10 FUSE 33P C0587-10 RB,0.5 C1854-3


TERM 15

5.0 Amps

FUSE 35P C0587-16 GB,0.5 X1397 GB,0.5 A

Sheet2
5.0 Amps

MAXI FUSE 62 C0581-2 R,4.0

30.0 Amps

Switch-Ignition (S176)

Auxiliary (Y163)
C0028-6 C0028-2 PB,4.0

Ignition (Y104)
C0028-9 G,4.0

Range Rover (LHD) (01 / 02) 51


308-07 FOUR WHEEL DRIVE SYSTEMS Transfer box

Switch-HDC/High-
Low Range (S418)

Transfer box control


module (D204) Solenoid-Mode-
A GB,0.5 C0365-6
selector (N148)
V+
NOT USED (V101) C1856-8 C1855-12 S,1.0H C2165-1
Sheet1
COIL +
Switch-Transmision-
NOT USED (V101) C1856-9 C1855-9 G,1.0H C2165-2
High-Low (S235)
COIL -

C0365-1 OR,0.5 C1856-4


HO-LO OUT A/L
HIGH SW
C1856-5
LOW SW
NOT USED (V101) Motor-Transfer box (M276)
C1855-15 N,2.5H SJ802 N,4.0D SJ803 N,2.5H C2167-1

C0245-2 NB,0.75 X230


GND
C1855-3 UR,0.5H C2167-3
HI-LO OUT A/H C0365-2 NB,0.5 SUPPLY +

C1855-2 RY,0.5H C2167-7


SUPPLY - +

C1855-1 GR,0.5H C2167-6


HALL SIGNAL (A)

C1855-6 GY,0.5H C2167-2


HALL SIGNAL (B)
-

C1855-5 R,0.5H C2167-4


TEMP SENSOR

C1855-18 R,2.5H SJ805 R,4.0D SJ804 R,2.5H C2167-8

Sensor-Selector-
position (T304)
C1855-10 R,0.5H C2169-2
POSITION SIGNAL

C1855-7 RY,0.5H C2169-3


SUPPLY -

C1855-8 UR,0.5H C2169-1


SUPPLY +

NB,1.0 C0552-0

Range Rover (LHD) (02 / 02) 52

You might also like