Atlas Copco Lubricants
Roto Inject Fluid NDURANCE
Ultimate Mineral Oil for your GA/GX
compressor
Atlas Copco Roto Inject Fluid NDURANCE is a mineral based oil specially
formulated to protect your GA-GX rotary screw compressor.
With several years of experience on developing cutting edge technology on
compressors, Atlas Copco has designed a unique additive package that
enables the Roto Inject Fluid NDURANCE to work in harmony with all other
components in the compressor.
With extended service intervals of up to 4 000 hours when operating in mild
conditions, RIF NDURANCE is a combination of a premium mineral base fluid
with an enhanced additive package to allow your compressor to operate in
dusty and humid conditions and keeping your system deposit free. The tailor
made viscosity (55mm²/s) together with specially designed anti-wear additives
provides your compressor the right lubrication for rotors, bearings and gears
for a wide spread of operating conditions.
Features Benefits
High resistance against oxidation Resistance against heavy pollution, high Protects the compressor against oxidation,
operating temperatures and high humidity. leading to a longer drain interval: up to
4 000h or 1 year in mild ambient conditions.
Perfect sealing and anti-wear properties Anti-wear additives are developed to Constant oil film protects the rotors and
protect the rotating parts. This will also help bearings during operation, preventing
seal the gaps between the rotors when the metal-metal contact of critical parts.
air is in the compression phase. Will avoid air leakages in the element.
Protection against corrosion Roto Inject Fluid NDURANCE separates Ensures that lubricant will keep its original
easily from water, maintaining original properties after separation from water.
lubricant properties. It will also keep water out of the oil circuit,
avoiding corrosion on the metal parts.
Oil system free of deposits High oxidation resistance of the base fluid Reduces contamination in the oil separator
in combination with specially designed anti- that would lead to pressure drop (meaning
oxidant additives will avoid formation of inefficient working of the compressor), or
lacquer or sludge when operating in blocking of valves. This also reduces the
specified conditions. risk of downtime due to oil system cleaning.
Good demulsifying properties Roto Inject Fluid NDURANCE separates Enables the optimum performance of the
easily from water, protecting the system Atlas Copco OSC & OSD treatment
from emulsions. devices.
Low foaming tendency Good air release properties make sure the Increases the efficiency of your
air is efficiently separated from the lubricant compressor. Low foaming will avoid
without foaming. pressure drops in the separator element.
Optimized Viscosity Tuned lubrication that guarantees the Full protection of the moving parts at a wide
correct oil film during operation. spread of operating conditions.
Volatility and oil consumption Premium mineral base fluid containing less Reduces oil carry over compared to typical
volatile components. mineral compressor oil.
www.atlascopco.com
Atlas Copco Lubricants
Roto Inject Fluid NDURANCE
Lubricant Characteristics
Appearance:
Colorless to straw pale yellow, transparent
Performance Method Unit Value
Density at 15 °Ce ISO 3675 kg/dm³ 0.87
Viscosity at 40 °C ASTM D 445 mm²/s 55
Viscosity index ASTM D 2270 106
Foam stability ASTM D 892 ml 0/0/0
Total acid number ASTM D 974 mg KOH/g 0.1
FZG fail stage ISO 14635-2 11
Rust test ASTM D 665B Pass
Pour point ASTM D 97 °C -33
These characteristics are typical of current production. Whilst future production will be conform to Atlas Copco’s specification, variations in these
characteristics may occur. Complies with ISO 6743 /3 /1A class L-DAH
2935-0046-21 © Atlas Copco Airpower n.v., Belgium. December 2015 - subject to alteration without prior notice.
ID Card
Name Roto Inject Fluid NDURANCE
Oil Type Mineral based lubricant
Service intervals 4 000 h or 1 year at mild ambient
conditions
Mild ambient conditions Ambient temperature range from
0°C to +30°C and dusty environment or
ambient temperature range from 0°C to
+30°C and humid environment
Maximum operating pressure 13 bar
Equipment Atlas Copco single stage oil injected
screws
Compatibility GA - GX compressors
Capacity (ID) 5 l plastic can (1630 1146 00)
20 l plastic can (1630 0918 00)
209 l metal drum (1630 0919 00)
1000 l container (1630 1442 00)
www.atlascopco.com
