HALALUBE® GFM 220

H1 Food Grade Gear Oil

Halalube® GFM 220 is an ISO VG 220 high performance gear lubricant based latest available additive
technology providing outstanding extreme pressure characteristics and load-carrying properties required in
gear systems for the food & beverage processing, edible oil, feeds, paper, pharmaceutical and personal care
industries.

Halalube® GFM 220 meets the requirements of FDA 21 CFR 178.3570 and is H1-registered for processes
where incidental food contact can occur. All Halalube® H1-registered products are manufactured according to
ISO 21469:2006 which supports producers’ HACCP and GMP programs. Halalube® H1-lubricants do not contain
ingredients of animal origin or genetically modified products and are HALAL certified.

APPLICATIONS: Halalube® GFM 220 is BENEFITS: Halalube® GFM 220 possesses the
recommended for: following benefits over other mineral oils:
 Gear sets, excluding worm gears  Excellent wear protection
 Gearing for conveyors  High corrosion inhibition
 Agitators and Mixers  Good water separation
 Extruders  Very good shear stability
 Pulpers  Extended drain intervals
 Presses  Good air release properties
 Non-gear applications, e.g. high loaded  No deposit/lacquer formation
bearings, shaft couplings, etc.
SERVICE TEMPERATURE RANGE:
SPECIFICATIONS: Halalube®
GFM 220 -5 °C to 160°C
meets or exceeds the requirements of the
following specifications:
DIN 51517-2 CLP
ISO 12925-1 CKB
HQC is a member of World
Halal Food Council (WHFC)
TYPICAL PROPERTIES: Value Method
Appearance Clear, yellow liquid Visual COMPATIBILITY: Halalube® GFM 220
Viscosity @ 40ºC, cSt 212.8 ASTM D-445 is compatible with commonly used
Viscosity @ 100ºC, cSt 19.4 ASTM D-445
seals, gaskets, hoses and paints. There
VI 103 ASTM D-2270
Density @ 15.6ºC, kg/l 0.882 ASTM D-1298 are no special
i l requirements
i t when
h
Total acid number, mg KOH/g 0.7 ASTM D-664 replacing PAO or other mineral-based
Flash point (COC), ºC 216 ASTM D-92 lubricants. Flushing is recommended
Pour point, ºC -21 ASTM D-97 to remove remaining residues.
Copper corrosion 1a ASTM D-130
Steel corrosion pass ASTM D-665B
Demulsibility @ 54ºC, min. 10 ASTM D-1401 PACKING: 20l & 209l
FBW @40kg/1Hr/75ºC/1200rpm 0.31 mm ASTM D-4172
W ldi lload,
Welding d kkg 160 ASTM D 2783
D-2783
For further information on other applications,
please contact our technical team.
In line with our policy of continuous development of our products, we reserve the right to alter any part of the above
specifications without prior notification. Although care has been taken to ensure the accuracy of this publication,
Halalube does not assume any liability for errors or omissions.
www.HALALUBE.my
Halalube® is a registered trademark of Sumber Petroleum Cemerlang Sdn Bhd.

The #1 Choice of Certified Food Grade Lubricant