0% found this document useful (0 votes)
72 views5 pages

Size 3 - Pneumatic-Valves-Spool-5 - 2-5 - 3-541-CAT-PA570Ggb

The document summarizes the specifications and functions of a multifunction spool valve that can be operated by air or solenoid air. It is a 5/2-5/3 valve that operates on air or neutral gas at pressures between -0.95 to 12 bar. It has 4200 l/min flow at 6.3 bar pressure and a maximum 15 million cycle life. The valve body is painted steel and it uses acetal resin and nitrile/polyurethane seals. It has multiple port configurations and pilot functions that can be selected with external selector seals.

Uploaded by

ynot3993
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
72 views5 pages

Size 3 - Pneumatic-Valves-Spool-5 - 2-5 - 3-541-CAT-PA570Ggb

The document summarizes the specifications and functions of a multifunction spool valve that can be operated by air or solenoid air. It is a 5/2-5/3 valve that operates on air or neutral gas at pressures between -0.95 to 12 bar. It has 4200 l/min flow at 6.3 bar pressure and a maximum 15 million cycle life. The valve body is painted steel and it uses acetal resin and nitrile/polyurethane seals. It has multiple port configurations and pilot functions that can be selected with external selector seals.

Uploaded by

ynot3993
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Series 543 MULTIFUNCTION SPOOL VALVE

air and solenoid air operated 5/2-5/3


ISO 5599/01 - Size 3 ports / positions

SPECIFICATIONS
FLUID : Air or neutral gas, filtered, lubricated or not
PRESSURE : Can be used with vacuum – 0.950 bar max.
– 0.950 to +12 bar (with external supply to pilot)
+3 to +10/12 bar (with internal supply to pilot)
PILOT PRESSURE - min. : 1.5 to 3 bar according to return operator
- max. : 12 bar (10 bar with solenoid pilots)
AMBIENT TEMPERATURE : –10°C, +60°C
FLOW (Qv at 6.3 bar) : 4200 l/min (ANR)
FLOW COEFFICIENTS
- conforming to ISO 6358 : C = 16 x 10–8 m3/s.Pa (sonic conductance)
b = 0.34 (absolute static pressure)
- conforming to NF E29312 : KV = 60 ( l/min)
RESPONSE TIME : See table CHOICE OF EQUIPMENT
LIFE : 15 millions of cycles (in normal operating conditions)
BASE : ISO 5599/01 - Size 3
PORTS : By subbases G 1/2 - G 3/4
SUBBASES : Single subbases ISO/AFNOR NF E49085
Joinable subbases ISO/VDMA 24345

MULTIFUNCTION
Multifunction valves are equipped with 2 pilot selector seals located on the upper part, on both sides : pilot and return. Each selector can be set in 2
positions to allow internal or external supply to the operators : air operated or solenoid-air pilot or return.
External supply enables the valves to be used with a fluid pressure ranging from 0 to 12 bar and with vacuum.
For this, it is only necessary to position the arrow of the selector into the notch matching the diagram of the required function (see below). Functions can
be modified at will. The valves are delivered with the selector pre-set on the position corresponding to the function requested on order (see table choice
of equipment).

Valve with Valve with


air operated pilot solenoid-air pilot
Tag Identification
with arrow plate
5

Pilot operators Return operators


(side 14) (side 12)

Dfferential
internal supply

Solenoid-air Solenoid differential


external supply internal supply
Air operated Solenoid-air
external supply internal supply

Solenoid-air Solenoid-air
internal supply external supply
Solenoid differential
external supply
Air operated
external supply
Differential
external supply

Spring

All leaflets available on: www.ascojoucomatic.com


PA570-27
Series 543 MULTIFUNCTION SPOOL VALVE
solenoid air operated 5/2-5/3
ISO 5599/01 - Size 3 ports / positions

SPECIFICATIONS
FLUID : Air or neutral gas, filtered, lubricated or not
PRESSURE : +3 to +10 bar (with internal supply to pilot)
+3 to +12 bar (with solenoid valve series 192)
– 0.950 to +12 bar (with external supply to pilot)
Can be used with vacuum – 0.950 bar max.
PILOT PRESSURE : See table CHOICE OF EQUIPMENT
AMBIENT TEMPERATURE : – 10°C, +60°C
FLOW (Qv at 6.3 bar) : 4200 l/min (ANR)
FLOW COEFFICIENTS
- conforming to ISO 6358 : C = 16 x 10–8 m3/s.Pa (sonic conductance)
b = 0,34 (absolute static pressure)
- conforming to NF E29312 : KV = 60 ( l/min)
RESPONSE TIME : See table CHOICE OF EQUIPMENT
LIFE : 15 millions of cycles (in normal operating conditions)
BASE : ISO 5599/01 - Size 3
PORTS : By subbases G 1/2 - G 3/4
SUBBASES : Single subbases ISO/AFNOR NF E49085
Joinable subbases ISO/VDMA 24345

1 = Pressure 12 =Return
2-4 = Outlets 14 =Pilot
3-5 = Exhausts

CONSTRUCTION
Painted steel cover
Pilot or return casing : acetal resin (POM)
Sealing : nitrile (NBR) and polyurethane (PUR)
Internal parts : light alloy and acetal resin (POM)
Multifunction pilot by selector seal
Without or with manual testers checking the spool position
or its manual override

CHOICE OF EQUIPMENT 5/2


Response Pressure 2 CODES
FUNCTIONS time of the Quantity & code
5/2 (ms) pilot fluid VALVE + SOLENOID PILOT
(in bar) WITHOUT WITH
Pilot (14) Ener- De-ener manual
manual
Symbols Return (12) gized gized min. max. tester testers Manual override: ▼ : impulse

14
4 2
12 Solenoid-air
pilot
- 90 115 3 10 543 91 023 543 91 006
5 3 Spring
1 return
4 2 Solenoid-air 190 00 022 with connector (LED)
14 12
pilot with M12
- 75 90 3 10 543 91 024 543 91 007 + 1x 190 60 005 connection
5 3 Differential
1 return 190 00 018 without connector

14
4 2
12 Solenoid-air
pilot
- 35 - 1,5 10 543 91 025 543 91 008
5 3 Air operated
1 return

4 2 Solenoid-air
14 12
pilot
- 35 - 3 10 543 91 026 543 91 009
5 3 Solenoid differential 190 00 022 with connector (LED)
1 return
with M12
+ 2x 190 60 005 connection
4 2
14 12 Solenoid-air 190 00 018 without connector
pilot 35 - 1,5 10 543 91 027 543 91 010
and
5 3 return
1

All leaflets available on: www.ascojoucomatic.com


PA570-28
Series 543
CHOICE OF EQUIPMENT 5/3

Response Pressure 2 CODES


time of the Quantity & code
5/3 (ms) pilot fluid VALVE + SOLENOID PILOT
(in bar) WITHOUT WITH
Ener- De-ener manual
manual
Symbols Functions gized gized min. max. tester testers Manual override: ▼ : impulse
4 2 Pressure held
14 12
W1 90 115 3 10 543 91 028 543 91 011
5 3
Solenoid-air
1
operated

4 2 Pressure applied 190 00 022 with connector (LED)


14 12
W2 60 115 3 10 543 91 029 543 91 014 + 2x 190 60 005 with M12
5 3
Solenoid-air connection
1
operated 190 00 018 without connector

4 2 Pressure release
14 12
W3 90 115 3 10 543 91 030 543 91 012
Solenoid-air
5 3
operated
1

ELECTRICAL CHARACTERISTICS OF PILOTS


Type of Consumption Insulation Protection Electrical
solenoid Voltages
valve Inrush Hold class degree connection
Series ~ 24V-115V-230V-50 Hz 6 VA 3,5VA(2,5W) Connector rotatable x 180°
189
Series
=
~
24V
24V-48V-115V-230V-50 Hz 9 VA
2,5 W
4VA(3W)
F IP 65
CM 8 (Pg 9P)
Connector ISO 4400
5
F IP 65 rotatable x 90° - CM 10 (Pg 11P)
190 = 12V-24V-48V-110V 3W with simplified connection
The solenoid valve series 190 is dual-voltage (24V ~, 12V =) (48V ~, 24V =) (115V ~, 48V =) (230V ~, 110V =)

OPTIONS
SOLENOID PILOTS
• Solenoid valve pilot 3/2 series 192 in 3 versions : 1-standard 2-with solenoid head and waterproof metal enclosure (see P512)
3-complying with European standards EEx "d", "m" or "me" for use in explosive atmospheres (see P595)
• Solenoid valve series 189 certified EEx "m" (see P593)
• Solenoid valve intrinsically safe series 630/ia or 195/ia certified EEx "i" (see P590 - P592)
• Solenoid valves series 189 - 190 with double pulse coil (see P514)
• Connector with cable outlet, 2 m long (see P515)
• Connector with transil protection (see P515-4)
• Solenoid valve with built-in visual indicator and protection :
Solenoid valve without connector + Connector with built-in visual indicator and VDR/RC protection

Type of CODE CODE (~ / =)


(M) solenoid valve
solenoid valve
without connector 24V 48V 115V 230V
189 NC ● 189 00 002 + 881 22 405 881 22 406 881 22 407 881 22 410
✕ 190 00 013
190 NC ● 190 00 014
▼ 190 00 018
✕ 192 00 022
+ 881 22 603 881 22 604 881 22 605 881 22 608

192 NC (1) ● 192 00 023


▼ 192 00 024

(M) Type of manual override on pilot(s) : ✕ : without ● : screwdriver ▼ : impulse


(1) Solenoid valve series 192 - 3/2 NC - Ø 2.1mm with exhaust in subbase

SUBBASES AND ACCESSORIES (see overleaf)

All leaflets available on: www.ascojoucomatic.com


PA570-29
Series 543
SUBBASES ISO 3
DESCRIPTION - TYPE CODES
Single G 1/2 355 00 171
Single subbase with side port
subbase G 3/4 355 00 192
Joinable subbase with bottom port G 1/2 355 00 173
(orifices 12 and 14 with side port G 1/8)
Joinable
subbases Set of 2 end plates ; ports 1-3-5 : G 1 (supplied with 3 plugs) 355 00 174
ISO - VDMA
Set of 3 plugs for main pressure (1) and exhausts (3-5) ports
881 35 520
for supply with 2 different pressures (see below)
Set of transfer plate and connections see page
for joinable subbases P570-18 and P570-29

The concept of mounting plug sets enables joinable subbases to be supplied with 2 different pressures.

5 5

1 1
P1 P2
3 3

ACCESSORIES ISO3
Designation Symbol CODES

Blanking plate to cover interface ISO2 Plate


4 5 1 3 2 881 35 519
This plate allows later assembly with a spool valve.
Subbase

Flow regulator sandwich


This unit, fitted between the subbase and the valve, incorporates 14 12
Spool valve
2 flow regulators in the exhaust ports 3 and 5.
25 346 00 469
Flow regulators can be used to control the speed of a double acting
MODULE
cylinder. 4 2
5 1 3 Subbase
Weight : 0,230kg

Sandwich pressure regulator regulator flow


Button side
12
module on Spool valve 346 00 464
at 6 bar: 14 12 (A)
port 1
2000 l/min E
(supply
MODULE
14

pressure) weight: 2.210kg 2


346 00 473
4
5 1 3 Subbase
This module, which is placed be-
tween a subbase and a spool valve,
is designed to regulate the pressure regulator flow
and the port according to: on at 6 bar: 14 12

2700 l/min 346 00 465


- Adjustable pressure: 0.5 to 10 bar port 2 E
- G1/8 (A) port on top for pres- weight: 2.210kg
sure gauge connection 4 5 1 3 2

- Locking adjustment knob of


"Pull-Turn-Push" type regulator flow
on at 6 bar: 14 12

2700 l/min 346 00 466


port 4 E
weight: 2.210kg 4 5 1 3 2

E regulator flow
on at 6 bar: 14 12
L L ports 2700 l/min 346 00 467
2 and 4 E
E = 67mm L =208mm weight: 3.200kg
4 5 1 3 2

Gauge Ø40 (0 - 12 bar) 343 00 014


G1/8 bracket connection for pressure gauge mounting 881 00 617

All leaflets available on: www.ascojoucomatic.com


PA570-30
Series 543
DIMENSIONS AND WEIGHTS
VALVES ON SINGLE SUBBASE WITH SIDE PORTS (ISO/AFNOR)

184
A Subbases
= =
D Dimensions
= = G 1/2 G 3/4
5 1 3
1
A 149 149
= =

B 165 ❉ 183 ❉
C

B1 158 176
14 4 2 12
C 71 71
2 D 136 136
E 32 50
3 F 22 40
G 18 18
H 17 20
J 32 36
K 68 80

L 90 92
B1
B

4 Mounting : 2 Ø 6.6
Solenoid valve series 189
E

F
G

Solenoid valve series 190/192


J 2 ports (12-14) : G 1/8
= = 5
K 5 ports (1-2-3-4-5) : G 1/2 or G 3/4
= =
=
L
= ❉ dimensions with pilot 192
+ 15 mm for plug removal 5
VALVES ON JOINABLE SUBBASES WITH BOTTOM PORTS (ISO/VDMA)

190
= =
130
= =
19,5

38
==

5
1
3 Weights (kg)
Number of Valves + 2 pilots
67,5
70,5

A B±5 C
29,5

4 subbases + subbases + end plates


43,5

14 Pilots 189 Pilots 190


2 12
2 206 167 71 4,140 4,260
3 277 238 142 5,740 5,860
B±5
C

4 4 348 309 213 7,340 7,460


14 2 12 5 419 380 284 8,940 9,060
71

6 490 451 355 10,540 10,660


7 561 522 426 12,140 12,260
32

5
1
3
Weight of pilot :189 = 0.120 Kg 190 = 0.180 Kg
Set of end plates supplied with 3 plugs G 1 (for 1-3-5)
6 52 7
= =
8
9
10 2 ports (4-2) : G 1/2
Bottom mounting : 2 holes M8 Ø 20
Front mounting : 4 holes Ø12
❉ Solenoid valve series 189
189
183

Solenoid valve series 190/192


11 2 ports (12-14) : G 1/8
14 12 3 ports (1-3-5) : G 1
56

1
46

5 3 ❉ dimensions with pilot 192


34
31

+ 15 mm for plug removal


12 104
= =

All leaflets available on: www.ascojoucomatic.com


PA570-31

You might also like