Product Environmental Profile

128 av. du Maréchal-de-Lattre-de-Tassigny

87045 Limoges Cedex France
Tel. +33 (0) 5 55 06 87 87
Fax. + 33 (0) 5 55 06 88 88
Cables for local networks cat. 6 - U/UTP - 4 PAIRS -
Your usual Sales office
www.legrand.com L. 305M - LSZH SLEEVE - Legrand cabling system LCS2

Legrand’s environmental commitments

• Incorporate environmental management into our industrial sites
Of all Legrand sites worldwide, over 80% are ISO 14001-certified (sites belonging to the Group for more than five years).
• Involve the environment in product design
Provide our customers with all relevant information (composition, consumption, end of life, etc.).
Reduce the environmental impact of products over their whole life cycle.
• Offer our customers environmentally friendly solutions
Develop innovative solutions to help our customers design more energy efficient, better managed and more environmentally friendly
installations.

reference product
Transmit a communication signal on 1 m according to Ethernet 1G protocol, 6 category, during 10 years and a
Function
25 % use rate in accordance with the standards in force.

Reference Product

Cat.No 0 327 54
LAN CABLE - CAT. 6 - U/UTP - 4 PAIRS - L. 305M - LSZH SLEEVE.
The company reserves the right to change specifications and designs without notice. All illustrations, descriptions, dimensions and weights in the document are for guidance and
cannot be held binding on the company.

Products concerned
The environmental data are representative of the following products:

Catalogue Numbers
• 0 327 54

PEP ecopassport No LGRP-2013-216-V1-EN O E0065A FR Page 1 / 4

 Product Environmental Profile
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. +33 (0) 5 55 06 87 87
Fax. + 33 (0) 5 55 06 88 88
Cables for local networks cat. 6 - U/UTP - 4 PAIRS -
Your usual Sales office
www.legrand.com L. 305M - LSZH SLEEVE - Legrand cabling system LCS2

Constituent materials
This Reference Product contains no substances prohibited by the regulations applicable at the time of its introduction to the market.

Total weight of
Reference Product 42 g (with unit packaging)

Plastics as % of weight Metals as % of weight Other as % of weight

PP 33,9 % Copper alloys 44,2 %
PE 16,4 %
Packaging as % of weight
Paper 5,3 %
PE 0,2 %
Total plastics 50,3 % Total metals 44,2 % Total other and packaging 5,5 %
Estimated recycled material content: 16 % of weight.

manufacture
The Reference Product comes from sites that, in their majority, have received ISO14001 certification.

distribution
Products are distributed from logistics centres located with a view to optimize transport efficiency. The Reference Product is therefore
transported over an average distance of 1406 km by road and 9 km by sea from our warehouse to the local point of distribution into the
market in all around the world.
Packaging is compliant with applicable regulation. At their end of life the recyclability rate is 97 % (in % of packaging weight).

installation
Installation components not delivered with the product are not taken into account.

use
Servicing and maintenance:
under normal conditions of use, this type of product requires no servicing or maintenance.
Consumable:
no consumables are necessary to use this type of product.

PEP ecopassport No LGRP-2013-216-V1-EN O E0065A FR Page 2 / 4

 Product Environmental Profile
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. +33 (0) 5 55 06 87 87
Fax. + 33 (0) 5 55 06 88 88
Cables for local networks cat. 6 - U/UTP - 4 PAIRS -
Your usual Sales office
www.legrand.com L. 305M - LSZH SLEEVE - Legrand cabling system LCS2

end of life
Product end of life management is integrated into product design by the development teams. The disassembly and sorting of
components or materials is made as easy as possible with a view to recycling or another form of reuse.
• Recyclability rate:
Calculated using the method described in technical report IEC/TR 62635, the recyclability rate of the product is estimated at 28 %.
This value is based on data collected from a technological channel operating on an industrial basis. It does not prejudge the effective
use of the channel for electrical and electronic products at the end of their life.
Separated into:
- cable : 24 %
- packaging (all types of materials) :5%

environmental impacts
The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution,
installation, use and end-of-life. It is representative from worlwide marketed products.
The following modelling elements were taken into account:

Manufacture Unit packaging taken into account. As required by the "PEP ecopassport" programme all transport for the
manufacturing of the Reference Product, including materials and components, has been taken in account.
Distribution Transport between the last Group distribution centre and an average delivery to the sales area.
Installation Installation components not delivered with the product are not taken into account.
Use • Under normal conditions of use, this type of product requires no servicing or maintenance.
• No consumables are necessary to use this type of product.
• Product category: wires, cables and accessories: twisted pairs cables.
• Use scenario: non-continuous operation for 10 years of working life, during 25 % of the time (for LAN tertiary appli-
cations), 1.13 mW of energy losses (determined by standard for 1 G Ethernet Cat6). This modelling duration does not
constitute a minimum durabilty requirement.
• Energy model: World - 2009
End of life In view of the data avalaible on the date of creation of the document, and in accordance with the requirements of
the PCR of the «PEP ecopassport» programme, and the PSR-0001-ed1-EN, theses end of life phases are taken into
account:
- transport of the Reference Product by road only once, over a distance of 1000 km, to a processing site at end of life
- a stage of grinding / separation of metals ans plastics
- recycling of 100 % of metals ans landfilling of other materials.
Software used EIME V5 and its database «Legrand-2012-10-31 version 3» made from the database «CODDE-2012-07»

PEP ecopassport No LGRP-2013-216-V1-EN O E0065A FR Page 3 / 4

 Product Environmental Profile
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. +33 (0) 5 55 06 87 87
Fax. + 33 (0) 5 55 06 88 88
Cables for local networks cat. 6 - U/UTP - 4 PAIRS -
Your usual Sales office
www.legrand.com L. 305M - LSZH SLEEVE - Legrand cabling system LCS2

environmental impacts (continued)

Raw
material and
Total for Life cycle manufacture Distribution Installation Use End of life

Global warming 1,61E+02 g~CO2 eq. 8,88E+01 55 % 6,97E+00 4% 0,00E+00 0% 2,52E+01 16 % 3,96E+01 25 %

Ozone depletion 2,43E-05 g~CFC-11 eq. 1,44E-05 59 % 4,92E-06 20 % 0,00E+00 0% 2,00E-07 < 1 % 4,74E-06 20 %
Mandatory indicators

Water
1,49E-02 g~PO43-eq. 1,06E-02 71 % 1,16E-04 < 1 % 0,00E+00 0% 5,05E-05 < 1 % 4,08E-03 27 %
eutrophication
Photochemical
7,50E-02 g~C2H4 eq. 5,82E-02 78 % 6,04E-03 8% 0,00E+00 0% 3,22E-03 4% 7,55E-03 10 %
ozone creation

Air acidification 7,95E-02 g~H+ eq. 7,12E-02 90 % 8,89E-04 1% 0,00E+00 0% 5,34E-03 7% 2,06E-03 3%

Total energy
3,15E+00 MJ 2,55E+00 81 % 8,80E-02 3% 0,00E+00 0% 3,05E-01 10 % 2,06E-01 7%
depletion

Water depletion 3,50E+00 dm3 3,43E+00 98 % 8,35E-03 < 1 % 0,00E+00 0% 2,81E-02 < 1 % 3,93E-02 1%

Raw material
5,48E-16 year-1 5,47E-16 100 % 1,20E-19 < 1 % 0,00E+00 0% 6,45E-20 < 1 % 4,91E-19 < 1 %
depletion
Optional indicators

Air toxicity 2,18E+05 m3 2,08E+05 95 % 1,31E+03 < 1 % 0,00E+00 0% 6,26E+03 3% 2,79E+03 1%

Water toxicity 6,06E-01 m3 4,36E-02 7% 9,70E-04 < 1 % 0,00E+00 0% 8,36E-04 < 1 % 5,61E-01 93 %

Hazardous waste
1,07E-02 kg 9,91E-03 93 % 2,59E-06 < 1 % 0,00E+00 0% 6,83E-04 6% 8,97E-05 < 1 %
production

The environmental impacts of the Reference Product are representative of the products covered by the PEP.

The values of these impacts are valid for the context specified in this document. They must not be used directly to draw up the environmental
balance sheet for the installation.

Concerning communication and data wires and cables, due to the wide range of possible installation of these products, the installation
phase is excluded from the PEP perimeter. The impact determination of the installation will be performed by the PEP users according to the
product use context.

Registration number: LGRP-2013-216-V1-EN Drafting rule: PCR : PEP-PCR-ed 2.1-FR-2012 12 11

supplemented by PSR : PSR-0001-ed1-EN-2012-01-10
Authorisation number of checker: VH02 Programme information: www.pep-ecopassport.org
Date of issue: 12-2013 Validity period: 4 years
Independent verification of the declaration and data, in accordance with ISO 14025:2006
Internal External
In accordance with ISO 14025:2006 Type III environmental declaration
The critical review of the PCR was conducted by a panel of experts chaired by J.Chevalier (CSTB)
The elements of the present PEP cannot be compared with elements from another programme

PEP ecopassport No LGRP-2013-216-V1-EN O E0065A FR Page 4 / 4