Scribd
Upload
2K views1 page

Bakau Pile Design

This document provides details for the design of a pile cap including: - Dimensions of columns supported by the pile cap - Loads on the columns - Material properties of concrete and steel - Pile layout including sizes, spacing, penetration, and maximum load - Reinforcement details for the pile cap including number and spacing of bars

Uploaded by

Ong George Sammy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Bakau Pile Design

This document provides details for the design of a pile cap including: - Dimensions of columns supported by the pile cap - Loads on the columns - Material properties of concrete and steel - Pile layout including sizes, spacing, penetration, and maximum load - Reinforcement details for the pile cap including number and spacing of bars

Uploaded by

Ong George Sammy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project version Date: 14 Feb 2017

(To be used in project associated with the licenser) Time: 8:5:33


Licenser: SY Perunding; www.syp.com.my By : ONG
PILECAP REFERENCE:Bakau PIle Roof Slab Extend Page: 1
-------------------------------------------------------------------------------------

Column Vert Dim, Hyy = 225 mm Pile X Y


Column Horz Dim, Hxx = 125 mm 1 -150 450
Column Service Load, Tt = 49 KN 2 150 450
Average Load Factor,ULF = 1.43 3 -150 150
Column Ser. Moment, Mxx = 0 KN-M 4 150 150
Column Ser. Moment, Myy = 0 KN-M 5 -150 -150
Concrete Grade, Fcu = 25.00 N/mm^2 6 150 -150
Steel Type, Fy =460.00 N/mm^2 7 -150 -450
Concrete cover = 40 mm 8 150 -450
Pile size = 100 mm
Max Pile Working Load = 8 KN
Safe Pile Spacing = 250 mm
Edge Distance = 100 mm
Pile Penetration = 75 mm

No.of warning(pile spacing + pile load)= 0 + 0 = 0


Pile Cap last rotated angle = 0 deg. clock-wise

P1 P2

P3 Y1 P4

1
3
X1 X
0
P5 P6 0

P7 P8

600

3 6 n
o
n n s
o o
s s 1
0
1 1
2 2 3
0
0

Piles C.G. x = 0.00mm. y = 0.00mm REBAR along XX = 6 NO. of 12.00 mm dia, at 223.20mm c/c
P.CAP C.G. x = 0.00mm. y = 0.00mm REBAR along YY = 3 NO. of 12.00 mm dia, at 244.00mm c/c
Eccen. Ex1 = 0.00mm.Ey1= 0.00mm LOOP BAR = 1 NO. Y 10
(Coordinate wrt Col. Centre as origin) anchorage of pile rebar to pilecap to be provided for
steel/r.c pile

You might also like