Page: 1

Settings File Report

Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:24

SYSTEM DATA
00.01: Language: English
00.03: Sys Fn Links: 0
00.04: Description: INCOMING 2
00.05: Plant Reference: PLTD TOBELO
00.06: Model Number: P14231QCBM0B20L
00.08: Serial Number: 709709F
00.09: Frequency: 50 Hz
00.0A: Comms Level: 2
00.0B: Relay Address: 1
00.0C: Plant Status: 0000000000000001
00.0D: Control Status: 0000000000000000
00.0E: Active Group: 1
00.10: CB Trip/Close: No Operation
00.11: Software Ref. 1: P142____BS_B20_B
00.12: Software Ref. 2: P142____BS_B20_B
00.14: NIC Platform Ref: P40_NIC_REF_2.0
00.15: IEC61850 Edition: 1
00.16: ETH COMM Mode: Dual IP
00.20: Opto I/P Status: 0000000001001011
00.21: Relay O/P Status: 0000000
00.22: Alarm Status 1: 00000000000000000000000000000000
00.30: Opto I/P Status: 0000000001001011
00.40: Relay O/P Status: 0000000
00.50: Alarm Status 1: 00000000000000000000000000000000
00.51: Alarm Status 2: 00000000000000000000000000000000
00.52: Alarm Status 3: 00000000000000000000000000000000
00.D0: Access Level: ENGINEER
00.DF: Security Feature: 3
00.F2: Number of users: 2
CB CONTROL
07.01: CB Control by: Opto+Rem+local
07.03: Trip Pulse Time: 500.0 ms
07.05: Man Close Delay: 10.00 s
07.06: CB Healthy Time: 5.000 s
07.08: Lockout Reset: No
07.09: Reset Lockout by: CB Close
07.0A: Man Close RstDly: 5.000 s
07.11: CB Status Input: Both 52A and 52B
DATE AND TIME
08.01: Date/Time: 2020-08-29 11:35:27.693
08.04: IRIG-B Sync: Disabled
08.06: Battery Status: Healthy
08.07: Battery Alarm: Enabled
08.13: SNTP Status: No response
08.20: LocalTime Enable: Fixed
08.21: LocalTime Offset: 0 min
08.22: DST Enable: Enabled
08.23: DST Offset: 60.00 min
08.24: DST Start:Last
08.25: DST Start Day: Sunday
08.26: DST Start Month: March
08.27: DST Start Mins: 60.00 min
08.28: DST End: Last
08.29: DST End Day: Sunday
08.2A: DST End Month: October
08.2B: DST End Mins: 60.00 min
CONFIGURATION

Easergy Studio
 Page: 2
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:24

09.01: Restore Defaults: No Operation

09.02: Setting Group: Select via Menu
09.03: Active Settings: Group 1
09.04: Save Changes: No Operation
09.05: Copy From: Group 1
09.06: Copy To: No Operation
09.07: Setting Group 1: Enabled
09.08: Setting Group 2: Disabled
09.09: Setting Group 3: Disabled
09.0A: Setting Group 4: Disabled
09.0B: System Config: Visible
09.10: Overcurrent: Enabled
09.11: Neg Sequence O/C: Disabled
09.12: Broken Conductor: Disabled
09.13: Earth Fault 1: Enabled
09.14: Earth Fault 2: Disabled
09.15: SEF/REF Prot'n: Disabled
09.16: Residual O/V NVD: Disabled
09.17: Thermal Overload: Disabled
09.18: Neg Sequence O/V: Disabled
09.19: Cold Load Pickup: Disabled
09.1A: Selective Logic: Disabled
09.1B: Admit Protection: Disabled
09.1C: Power Protection: Disabled
09.1D: Volt Protection: Disabled
09.1E: Freq Protection: Disabled
09.20: CB Fail: Disabled
09.21: Supervision: Disabled
09.22: Fault Locator: Disabled
09.23: System Checks: Disabled
09.24: Auto-Reclose: Disabled
09.25: Input Labels: Visible
09.26: Output Labels: Visible
09.27: Adv. Freq Prot'n: Disabled
09.28: CT & VT Ratios: Visible
09.29: Record Control: Invisible
09.2A: Disturb Recorder: Invisible
09.2B: Measure't Setup: Invisible
09.2C: Comms Settings: Visible
09.2D: Commission Tests:Visible
09.2E: Setting Values: Primary
09.2F: Control Inputs: Visible
09.35: Ctrl I/P Config: Visible
09.36: Ctrl I/P Labels: Visible
09.39: Direct Access: Enabled
09.70: VIR I/P Labels: Invisible
09.80: VIR O/P Labels: Invisible
09.90: Usr Alarm Labels: Invisible
09.FD: NIC Read Only: Disabled
09.FF: LCD Contrast: 12
CT AND VT RATIOS
0A.01: Main VT Primary: 20.00 kV
0A.02: Main VT Sec'y: 100.0 V
0A.07: Phase CT Primary: 400.0 A
0A.08: Phase CT Sec'y: 5.000 A
0A.09: E/F CT Primary: 400.0 A
0A.0A: E/F CT Secondary: 5.000 A
0A.0B: SEF CT Primary: 400.0 A

Easergy Studio
 Page: 3
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:24

0A.0C: SEF CT Secondary:5.000 A

COMMISSION TESTS
0F.01: Opto I/P Status: 0000000000000000
0F.02: Relay O/P Status: 0000000
0F.03: Test Port Status: 00000000
0F.04: LED Status: 00000000
0F.05: Monitor Bit 1: 64
0F.06: Monitor Bit 2: 65
0F.07: Monitor Bit 3: 66
0F.08: Monitor Bit 4: 67
0F.09: Monitor Bit 5: 68
0F.0A: Monitor Bit 6: 69
0F.0B: Monitor Bit 7: 70
0F.0C: Monitor Bit 8: 71
0F.0D: Test Mode: Disabled
0F.10: Test LEDs: No Operation
0F.11: Test Autoreclose: No Operation
0F.20: DDB 31 - 0: 00000000000000000000000000000000
0F.21: DDB 63 - 32: 00000000000000000000000001001011
0F.22: DDB 95 - 64: 00000000000000000000000000000000
0F.23: DDB 127 - 96: 00000000000000000000000000000000
0F.24: DDB 159 - 128: 00000000000000000000000000000000
0F.25: DDB 191 - 160: 00000000000000000000000000000000
0F.26: DDB 223 - 192: 00000000000000000000000000000000
0F.27: DDB 255 - 224: 00000000000000000000000001100000
0F.28: DDB 287 - 256: 00000000000000000000000000000000
0F.29: DDB 319 - 288: 00000000000000000000000000000000
0F.2A: DDB 351 - 320: 00000000000000000000000000000000
0F.2B: DDB 383 - 352: 11110111111000000000010010000000
0F.2C: DDB 415 - 384: 00001000000000000000000000000001
0F.2D: DDB 447 - 416: 00000000000000000000000000000000
0F.2E: DDB 479 - 448: 00000000000000001000011000000000
0F.2F: DDB 511 - 480: 00000000000000000000000000000000
0F.30: DDB 543 - 512: 00000000000000000000000000000000
0F.31: DDB 575 - 544: 00000010011110000000000000000000
0F.32: DDB 607 - 576: 00000000000000000000000000000000
0F.33: DDB 639 - 608: 00000000000000000000000000000000
0F.34: DDB 671 - 640: 00000000000000000000000000000000
0F.35: DDB 703 - 672: 00000000000000000000000000000000
0F.36: DDB 735 - 704: 00000000000000000000000000000000
0F.37: DDB 767 - 736: 00000000000000000000000000000000
0F.38: DDB 799 - 768: 00000000001110000000000000000000
0F.39: DDB 831 - 800: 00000000000000000000000000000000
0F.3A: DDB 863 - 832: 00000000000000000000000000000000
0F.3B: DDB 895 - 864: 00000000000000000000000000000000
0F.3C: DDB 927 - 896: 00000000000000000000000000000000
0F.3D: DDB 959 - 928: 00000000000000000000000000000000
0F.3E: DDB 991 - 960: 00000000000000000000000000000000
0F.3F: DDB 1023 - 992: 00000000000000000000000000000000
0F.40: DDB 1055 - 1024: 00000000000000000000000000000000
0F.41: DDB 1087 - 1056: 00000000000000000000000000000000
0F.42: DDB 1119 - 1088: 00000000000000000000000000000000
0F.43: DDB 1151 - 1120: 00000000000000000000000000000000
0F.44: DDB 1183 - 1152: 00000000000000000000000000000000
0F.45: DDB 1215 - 1184: 00000000000000000000000000000011
0F.46: DDB 1247 - 1216: 00000000000000000000000000000000
0F.47: DDB 1279 - 1248: 00000000000000000000000000000000
0F.48: DDB 1311 - 1280: 00000000000000000000000000000000

Easergy Studio
 Page: 4
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:24

0F.49: DDB 1343 - 1312: 00000000000000000000000000000000

0F.4A: DDB 1375 - 1344: 00000000000000000000000000000000
0F.4B: DDB 1407 - 1376: 00000000000000000000000000000000
0F.4C: DDB 1439 - 1408: 00000000000000000000000000000000
0F.4D: DDB 1471 - 1440: 00000000000000000000000000000000
0F.4E: DDB 1503 - 1472: 00000000000000000000000000000000
0F.4F: DDB 1535 - 1504: 00000000000000000000000000000000
0F.50: DDB 1567 - 1536: 00000000000000000000000000000000
0F.51: DDB 1599 - 1568: 00000000000000000000000000000000
0F.52: DDB 1631 - 1600: 00000000000000000000000000000000
0F.53: DDB 1663 - 1632: 00000000000000000000000000000000
0F.54: DDB 1695 - 1664: 00000000000000000000000000000000
0F.55: DDB 1727 - 1696: 00000000000000000000000000000000
0F.56: DDB 1759 - 1728: 00000000000000000000000000000000
0F.57: DDB 1791 - 1760: 00000000000000000000000000000000
0F.58: DDB 1823 - 1792: 00000000000000000000000000000000
0F.59: DDB 1855 - 1824: 00000000000000000000000000000000
0F.5A: DDB 1887 - 1856: 00000000000000000000000000000000
0F.5B: DDB 1919 - 1888: 00000000000000000000000000000000
0F.5C: DDB 1951 - 1920: 00000000000000000000000000000000
0F.5D: DDB 1983 - 1952: 00000000000000000000000000000000
0F.5E: DDB 2015 - 1984: 00000000000000000000000000000000
0F.5F: DDB 2047 - 2016: 00000000000000000000000000000000
CB MONITOR SETUP
10.01: Broken I^: 2.000
10.02: I^ Maintenance: Alarm Disabled
10.04: I^ Lockout: Alarm Disabled
10.06: No. CB Ops Maint: Alarm Disabled
10.08: No. CB Ops Lock: Alarm Disabled
10.0A: CB Time Maint: Alarm Disabled
10.0C: CB Time Lockout: Alarm Disabled
10.0E: Fault Freq Lock: Alarm Disabled
OPTO CONFIG
11.01: Global Nominal V: 110/125V
11.50: Opto Filter Cntl: 1111111111111111
11.80: Characteristic: Standard 60%-80%
CONTROL INPUTS
12.01: Ctrl I/P Status: 00000000000000000000000000000000
12.02: Control Input 1: No Operation
12.03: Control Input 2: No Operation
12.04: Control Input 3: No Operation
12.05: Control Input 4: No Operation
12.06: Control Input 5: No Operation
12.07: Control Input 6: No Operation
12.08: Control Input 7: No Operation
12.09: Control Input 8: No Operation
12.0A: Control Input 9: No Operation
12.0B: Control Input 10: No Operation
12.0C: Control Input 11: No Operation
12.0D: Control Input 12: No Operation
12.0E: Control Input 13: No Operation
12.0F: Control Input 14: No Operation
12.10: Control Input 15: No Operation
12.11: Control Input 16: No Operation
12.12: Control Input 17: No Operation
12.13: Control Input 18: No Operation
12.14: Control Input 19: No Operation
12.15: Control Input 20: No Operation

Easergy Studio
 Page: 5
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:24

12.16: Control Input 21: No Operation

12.17: Control Input 22: No Operation
12.18: Control Input 23: No Operation
12.19: Control Input 24: No Operation
12.1A: Control Input 25: No Operation
12.1B: Control Input 26: No Operation
12.1C: Control Input 27: No Operation
12.1D: Control Input 28: No Operation
12.1E: Control Input 29: No Operation
12.1F: Control Input 30: No Operation
12.20: Control Input 31: No Operation
12.21: Control Input 32: No Operation
12.22: Ctl Stg I/P Stat: 0000000000000000
12.23: Ctrl Setg I/P 33: Disabled
12.24: Ctrl Setg I/P 34: Disabled
12.25: Ctrl Setg I/P 35: Disabled
12.26: Ctrl Setg I/P 36: Disabled
12.27: Ctrl Setg I/P 37: Disabled
12.28: Ctrl Setg I/P 38: Disabled
12.29: Ctrl Setg I/P 39: Disabled
12.2A: Ctrl Setg I/P 40: Disabled
12.2B: Ctrl Setg I/P 41: Disabled
12.2C: Ctrl Setg I/P 42: Disabled
12.2D: Ctrl Setg I/P 43: Disabled
12.2E: Ctrl Setg I/P 44: Disabled
12.2F: Ctrl Setg I/P 45: Disabled
12.30: Ctrl Setg I/P 46: Disabled
12.31: Ctrl Setg I/P 47: Disabled
12.32: Ctrl Setg I/P 48: Disabled
CTRL I/P CONFIG
13.01: Hotkey Enabled: 11111111111111111111111111111111
13.10: Control Input 1: Latched
13.11: Ctrl Command 1: SET/RESET
13.14: Control Input 2: Latched
13.15: Ctrl Command 2: SET/RESET
13.18: Control Input 3: Latched
13.19: Ctrl Command 3: SET/RESET
13.1C: Control Input 4: Latched
13.1D: Ctrl Command 4: SET/RESET
13.20: Control Input 5: Latched
13.21: Ctrl Command 5: SET/RESET
13.24: Control Input 6: Latched
13.25: Ctrl Command 6: SET/RESET
13.28: Control Input 7: Latched
13.29: Ctrl Command 7: SET/RESET
13.2C: Control Input 8: Latched
13.2D: Ctrl Command 8: SET/RESET
13.30: Control Input 9: Latched
13.31: Ctrl Command 9: SET/RESET
13.34: Control Input 10: Latched
13.35: Ctrl Command 10: SET/RESET
13.38: Control Input 11: Latched
13.39: Ctrl Command 11: SET/RESET
13.3C: Control Input 12: Latched
13.3D: Ctrl Command 12: SET/RESET
13.40: Control Input 13: Latched
13.41: Ctrl Command 13: SET/RESET
13.44: Control Input 14: Latched

Easergy Studio
 Page: 6
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:24

13.45: Ctrl Command 14: SET/RESET

13.48: Control Input 15: Latched
13.49: Ctrl Command 15: SET/RESET
13.4C: Control Input 16: Latched
13.4D: Ctrl Command 16: SET/RESET
13.50: Control Input 17: Latched
13.51: Ctrl Command 17: SET/RESET
13.54: Control Input 18: Latched
13.55: Ctrl Command 18: SET/RESET
13.58: Control Input 19: Latched
13.59: Ctrl Command 19: SET/RESET
13.5C: Control Input 20: Latched
13.5D: Ctrl Command 20: SET/RESET
13.60: Control Input 21: Latched
13.61: Ctrl Command 21: SET/RESET
13.64: Control Input 22: Latched
13.65: Ctrl Command 22: SET/RESET
13.68: Control Input 23: Latched
13.69: Ctrl Command 23: SET/RESET
13.6C: Control Input 24: Latched
13.6D: Ctrl Command 24: SET/RESET
13.70: Control Input 25: Latched
13.71: Ctrl Command 25: SET/RESET
13.74: Control Input 26: Latched
13.75: Ctrl Command 26: SET/RESET
13.78: Control Input 27: Latched
13.79: Ctrl Command 27: SET/RESET
13.7C: Control Input 28: Latched
13.7D: Ctrl Command 28: SET/RESET
13.80: Control Input 29: Latched
13.81: Ctrl Command 29: SET/RESET
13.84: Control Input 30: Latched
13.85: Ctrl Command 30: SET/RESET
13.88: Control Input 31: Latched
13.89: Ctrl Command 31: SET/RESET
13.8C: Control Input 32: Latched
13.8D: Ctrl Command 32: SET/RESET
IED CONFIGURATOR
19.05: Switch Conf.Bank: No action
19.0A: Restore Conf.: No action
19.30: IP PARAMETERS:
19.40: SNTP PARAMETERS:
19.50: IEC 61850 SCL:
19.60: IEC 61850 GOOSE:
19.70: GoEna: 0000000000000000
19.71: Pub.Simul.Goose: 0000000000000000
19.73: Sub.Simul.Goose: No
SECURITY CONFIG
25.01: User Banner: ACCESS ONLY FOR AUTHORISED USERS
CTRL I/P LABELS
29.01: Control Input 1: Control Input 1
29.02: Control Input 2: Control Input 2
29.03: Control Input 3: Control Input 3
29.04: Control Input 4: Control Input 4
29.05: Control Input 5: Control Input 5
29.06: Control Input 6: Control Input 6
29.07: Control Input 7: Control Input 7
29.08: Control Input 8: Control Input 8

Easergy Studio
 Page: 7
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:24

29.09: Control Input 9: Control Input 9

29.0A: Control Input 10: Control Input 10
29.0B: Control Input 11: Control Input 11
29.0C: Control Input 12: Control Input 12
29.0D: Control Input 13: Control Input 13
29.0E: Control Input 14: Control Input 14
29.0F: Control Input 15: Control Input 15
29.10: Control Input 16: Control Input 16
29.11: Control Input 17: Control Input 17
29.12: Control Input 18: Control Input 18
29.13: Control Input 19: Control Input 19
29.14: Control Input 20: Control Input 20
29.15: Control Input 21: Control Input 21
29.16: Control Input 22: Control Input 22
29.17: Control Input 23: Control Input 23
29.18: Control Input 24: Control Input 24
29.19: Control Input 25: Control Input 25
29.1A: Control Input 26: Control Input 26
29.1B: Control Input 27: Control Input 27
29.1C: Control Input 28: Control Input 28
29.1D: Control Input 29: Control Input 29
29.1E: Control Input 30: Control Input 30
29.1F: Control Input 31: Control Input 31
29.20: Control Input 32: Control Input 32
29.21: Ctrl Setg I/P 33: Ctrl Setg I/P 33
29.22: Ctrl Setg I/P 34: Ctrl Setg I/P 34
29.23: Ctrl Setg I/P 35: Ctrl Setg I/P 35
29.24: Ctrl Setg I/P 36: Ctrl Setg I/P 36
29.25: Ctrl Setg I/P 37: Ctrl Setg I/P 37
29.26: Ctrl Setg I/P 38: Ctrl Setg I/P 38
29.27: Ctrl Setg I/P 39: Ctrl Setg I/P 39
29.28: Ctrl Setg I/P 40: Ctrl Setg I/P 40
29.29: Ctrl Setg I/P 41: Ctrl Setg I/P 41
29.2A: Ctrl Setg I/P 42: Ctrl Setg I/P 42
29.2B: Ctrl Setg I/P 43: Ctrl Setg I/P 43
29.2C: Ctrl Setg I/P 44: Ctrl Setg I/P 44
29.2D: Ctrl Setg I/P 45: Ctrl Setg I/P 45
29.2E: Ctrl Setg I/P 46: Ctrl Setg I/P 46
29.2F: Ctrl Setg I/P 47: Ctrl Setg I/P 47
29.30: Ctrl Setg I/P 48: Ctrl Setg I/P 48
Group 1
GROUP 1 SYSTEM CONFIG
30.02: Phase Sequence: Standard ABC
30.03: 2NDHARM BLOCKING:
30.04: 2nd Harmonic: Disabled
GROUP 1 OVERCURRENT
35.23: I>1 Function: IEC S Inverse
35.24: I>1 Direction: Non-Directional
35.27: I>1 Current Set: 200.0 A
35.2A: I>1 TMS: 500.0e-3
35.2D: I>1 DT Adder: 0s
35.2F: I>1 tRESET: 0s
35.32: I>2 Function: DT
35.33: I>2 Direction: Non-Directional
35.36: I>2 Current Set: 1200 A
35.38: I>2 Time Delay: 500.0 ms
35.3E: I>2 tRESET: 0s
35.40: I>3 Status: Enabled

Easergy Studio
 Page: 8
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:25

35.41: I>3 Direction: Directional Fwd

35.44: I>3 Current Set: 1200 A
35.45: I>3 Time Delay: 500.0 ms
35.47: I>4 Status: Disabled
35.4E: I> Blocking: 0000000000111111
35.4F: I> Char Angle: 45.00 deg
35.51: V DEPENDANT O/C:
35.52: V Dep OC Status: Disabled
35.63: I>5 Function: Disabled
35.71: I>6 Status: Disabled
35.8F: I> Blocking 2: 0000
35.90: LOAD BLINDER:
35.91: Blinder Status: Disabled
GROUP 1 EARTH FAULT 1
38.01: IN1> Input: Measured
38.25: IN1>1 Function: IEC S Inverse
38.26: IN1>1 Direction: Non-Directional
38.29: IN1>1 Current: 80.00 A
38.2D: IN1>1 TMS: 500.0e-3
38.31: IN1>1 DT Adder: 0 s
38.33: IN1>1 tRESET: 0s
38.36: IN1>2 Function: DT
38.37: IN1>2 Direction: Non-Directional
38.3A: IN1>2 Current: 320.0 A
38.3D: IN1>2 Time Delay: 500.0 ms
38.44: IN1>2 tRESET: 0s
38.46: IN1>3 Status: Enabled
38.47: IN1>3 Direction: Directional Fwd
38.4A: IN1>3 Current: 320.0 A
38.4B: IN1>3 Time Delay: 500.0 ms
38.4D: IN1>4 Status: Disabled
38.54: IN1> Blocking: 0000001111
38.55: IN1> POL:
38.56: IN1> Char Angle: -45.00 deg
38.57: IN1> Pol: Zero Sequence
38.59: IN1> VNpol Set: 1000 V
GROUP 1 CB FAIL & I<
45.08: UNDER CURRENT:
45.09: I< Current Set: 40.00 A
45.0A: IN< Current Set: 40.00 A
45.0B: ISEF< Current: 8.000 A
GROUP 1 INPUT LABELS
4A.01: Opto Input 1: L1_TCS
4A.02: Opto Input 2: L2_CB OPEN
4A.03: Opto Input 3: L3_CB CLOSE
4A.04: Opto Input 4: L4_CB TEST
4A.05: Opto Input 5: L5_CB SERVICE
4A.06: Opto Input 6: L6_ES OPEN
4A.07: Opto Input 7: L7_ES CLOSE
4A.08: Opto Input 8: L8_LOCAL MODE
4A.09: Opto Input 9: L9_REMOTE MODE
4A.0A: Opto Input 10: L10_AR OFF
4A.0B: Opto Input 11: L11_AR ON
4A.0C: Opto Input 12: L12_UFR SELECTOR
4A.0D: Opto Input 13: L13_UFR TRIP
4A.0E: Opto Input 14: L14_AC SPLY FAIL
4A.0F: Opto Input 15: L15_DC SPLY FAIL
4A.10: Opto Input 16: L16_WD RELAY

Easergy Studio
 Page: 9
Settings File Report
Substation:
File: 000.set
Model Number: P14231QCBM0B20L Printed on: 22/11/2020 21:08:25

GROUP 1 OUTPUT LABELS

4B.01: Relay 1: RL1_FAULT TRIP
4B.02: Relay 2: RL2_79 LOCKOUT
4B.03: Relay 3: RL3_OCR&EF TRIP
4B.04: Relay 4: RL4_REMOTE CLOSE
4B.05: Relay 5: RL5_TCS
4B.06: Relay 6: RL6_REMOTE OPEN
4B.07: Relay 7: RL7_START
Group 2
Group 3
Group 4

Easergy Studio